Kinetic and modelling studies on the lipase catalysed enantioselective esterification of (±)-perillyl alcohol

Several lipases were kinetically studied with the aim to exploit their enantioselectivity in the esterification of (S)-(−) and (R)-(+)-perillyl alcohol with decanoic acid. Most of the lipases studied exhibited stereopreference towards the R-enantiomer with apparent E-values from 3.8 to 0.6, calculated as the initial esterification rates ratio for the individual enantiomers. In an attempt to interpret the structural basis of enantioselectivity, modelling studies were performed with two of these lipases, Candida cylindracea lipase (CcL) and Pseudomonas cepacia lipase (PcL) based on their previously determined X-ray crystal structures. The results derived from modelling studies confirm their stereopreferences towards the R-enantiomer, since increased conformational energy of the S-ester was found compared to the R-ester.     

Biocatalyst engineering exerts a dramatic effect on selectivity of hydrolysis catalyzed by immobilized lipases in aqueous medium

It has been found that enantioselectivity of lipases is strongly modified when their immobilization is performed by involving different areas of the enzyme surface, by promoting a different degree of multipoint covalent immobilization or by creating different environments surrounding different enzyme areas. Moreover, selectivity of some immobilized enzyme molecules was much more modulated by the experimental conditions than other derivatives. Thus, some immobilized derivatives of Candida rugosa (CRL) and C. antarctica-B (CABL) lipases are hardly enantioselective in the hydrolysis of chiral esters of (R,S)-mandelic acid under standard conditions (pH 7.0 and 25°C) (E<2). However, other derivatives of the same enzymes exhibited a very good enantioselectivity under nonstandard conditions. For example, CRL adsorbed on PEI-coated supports showed a very high enantio-preference towards S-isomer (E=200) at pH 5. On the other hand, CABL adsorbed on octyl-agarose showed an interesting enantio-preference towards the R-isomer (E=25) at pH 5 and 4°C. These biotransformations are catalyzed by isolated lipase molecules acting on fully soluble substrates and in the absence of interfacial activation against external hydrophobic interfaces. Under these conditions, lipase catalysis may be associated to important conformational changes that can be strongly modulated via biocatalyst and biotransformation engineering. In this way, selective biotransformations catalyzed by immobilized lipases in macro-aqueous systems can be easily modulated by designing different immobilized derivatives and reaction conditions.     

Biochemical properties and potential applications of an organic solvent-tolerant lipase isolated from Serratia marcescens ECU1010

An extracellular lipase was purified to homogeneity with a purification factor of 5.5-fold from a bacterial strain Serratia marcescens ECU1010. The purified lipase is a dimer with two homologous subunits, of which the molecular mass is 65 kDa, and the pI is 4.2. The pH and temperature optima were shown to be pH 8.0 and 45 °C, respectively. Among p-nitrophenyl esters of fatty acids with varied chain length, the lipase showed the maximum activity on p-nitrophenyl myristate (C₁₄). The lipase was activated by some surfactants such as Gum Arabic, polyvinyl alcohol (PVA) and Pg350me, but not by Ca²⁺. The enzyme displayed pretty high stability in many water miscible and immiscible solvents. This is a unique property of the enzyme which makes it extremely suitable for chemo-enzymatic applications in non-aqueous phase organic synthesis including enantiomeric resolution. Several typical chiral compounds were tested for kinetic resolution with this lipase, consequently giving excellent enantioselectivities (E = 83 >100) for glycidyl butyrate (GB), 4-hydroxy-3-methyl-2-(2-propenyl)-2-cyclopenten-1-one acetate (HMPCA), naproxen methyl ester (NME) and trans-3-(4′-methoxyphenyl) glycidic acid methyl ester (MPGM).     

Simple screening method for lipase for transesterification in organic solvent

We investigated lipase-catalyzed hydrolysis in water and dioxane—water with a simple colorimetric method. We screened 24 lipases for the ability to hydrolyze p-nitrophenyl esters as chromogenic substrates. Their hydrolytic activities were varied by adding dioxane. Most of the lipases showed high activity in hydrolysis in water, but some showed activity in 50% dioxane—water several tens times higher than those in water. Moreover, several lipases with hydrolytic abilities in 50% dioxane—water also catalyzed the transesterification of p-nitrophenol using fatty acid vinyl esters. We found it possible that a useful lipase for transesterification can be selected by measuring the hydrolysis activity of p-nitrophenyl ester in 50% dioxane—water.     

Microbial lipases as virulence factors

Up to now, lipases of microbial origin are known to be very useful in a palette of industrial applications. But it becomes more and more obvious that extracellular lipases also play a role during microbial infections. This review will focus on the virulent traits of these secreted enzymes from bacteria and fungi. Special emphasis will be laid on Candida albicans research. This human pathogenic fungus possesses a lipase gene family, which is expressed and differentially regulated under a variety of in vitro conditions. First results show that this isoenzyme family is also expressed during an experimental infection.

In addition, putative functions of extracellular lipases of pathogenic micro-organisms will be discussed.     

Lipase activity of thermophilic bacteria from icelandic hot springs

Summary Several bacteria strains were choosen from pre-selected strains for further testing and characterisation. Hydrolytic activity of lipases from thermophilic bacteria was examined using olive oil as a substrate at different reaction temperatures. Alcoholytic activity was also investigated. Lipases from thermophilic bacteria have been successfully produced on a large scale. To be able to predict if these lipases can be used for transesterification reactions, these preparations need to be purified further or to be cloned.     

Overexpression of Serratia marcescens lipase in Escherichia coli for efficient bioresolution of racemic ketoprofen

Lipase from Serratia marcescens ECU1010 was cloned and overexpressed in E. coli. After optimization, the maximum lipase activities reached 5000–6000 U/l and this recombinant lipase could enantioselectively hydrolyze (S)-ketoprofen esters into (S)-ketoprofen. Among six alkyl esters of racemic ketoprofen investigated, this lipase showed the best enantioselectivity for the kinetic resolution of ketoprofen ethyl ester, with an ee_p (enantiomeric excess of product) of 91.6% and E-value of 63 obtained at 48.2% conversion. Twelve nonionic surfactants were tested for enhancing the enantioselectivity of this lipase in the bioresolution of ketoprofen ethyl ester. A very high E-value of 1084 was achieved, with an optical purity of >99% ee_p and a yield of 42.6% in the presence of 3% Brij 92V. Further studies showed that the selectivity of the lipase was improved with the increase of Brij 92V concentration. The substrate (ketoprofen ethyl ester) does not inhibit the lipase activity, while the product (S)-ketoprofen inhibits the lipase activity to some extent. These results indicate that the S. marcescens lipase is very useful for biocatalytic production of chiral profens such as (S)-ketoprofen.     

Utilizing hydrolases of opposite enantiopreference for the preparation of both enantiomers of (1R,7aR)-(-)- and (1S,7aS)-(+)-3,6,7,7a-tetrahydro-1-hydroxy-7a-methyl-1H-inden-5(2H)-one

Four racemic esters of (1R*,7aR*)-3,6,7,7a-tetrahydro-1-hydroxy-7a-methyl-1H-inden-5(2H)-one were prepared and subjected to hydrolysis with two types of hydrolases, including alcalase and three lipases. Alcalase and lipase showed opposite enantiopreference on these esters. Based on this result, we developed a gram-scale procedure using butanoate as the substrate, which was treated consecutively with alcalase and lipase from Candida rugosa (CRL), to give both enantiomers of the title compound in high yields and high enantiomeric excess.     

Lipase catalysed synthesis of diacyl hydrazines: an indirect method for kinetic resolution of chiral acids

The acylation of hydrazine, to afford the N,N′-diacyl derivatives, was catalysed by a number of lipases. The rates of the first and second steps depended on the lipase and the type of solvent used. Water, up to 0.4 M, had no detrimental effect on the yield and complete conversion to the N,N′-diacyl derivative was accomplished with some lipases. The hydrazide of 2-(4-isobutylphenyl)propanoic acid (ibuprofen), prepared by non-enzymatic reaction of ibuprofen methyl ester with hydrazine, acted as a nucleophile towards several lipases that do not accept ibuprofen derivatives as the acyl donor, but the enantiomer differentiation was inefficient in most cases. The best result was obtained with Pseudomonas lipoprotein lipase on EP 100 which formed the (R) enantiomer of the product (N-octanoyl-N′-2-(4-isobutylphenyl)propanoylhydrazine) with an enantiomeric ratio E of 26.     

Covalent immobilization of pure isoenzymes from lipase of Candida rugosa

Covalent immobilization of pure lipases A and B from Candida rugosa on agarose and silica is described. The immobilization increases the half-life of the biocatalysts ( ) with respect to the native pure lipases ( ). The percentage immobilization of lipases A and B is similar in both supports (33–40%). The remaining activity of the biocatalysts immobilized on agarose (70–75%) is greater than that of the enzymatic derivatives immobilized on SiO₂ (40–50%). The surface area and the hydrophobic/hydrophilic properties of the support control the lipase activity of these derivatives. The thermal stability of the immobilized lipase A derivatives is greater than that of lipase B derivatives. The nature of the support influences the thermal deactivation profile of the immobilized derivatives. The immobilization in agarose (hydrophilic support) gives biocatalysts that show a greater initial specific reaction rate than the biocatalysts immobilized in SiO₂ (hydrophobic support) using the hydrolysis of the esters of (R) or (S) 2-chloropropanoic and of (R,S) 2-phenylpropanoic acids as the reaction test. The enzymatic derivatives are active for at least 196 h under hydrolysis conditions. The stereospecificity of the native and the immobilized enzymes is the same.     

Screening and catalytic activity in organic synthesis of novel fungal and yeast lipases

A total of 969 microbial strains were isolated from soil samples and tested to determine their lipolytic activity by employing screening techniques on solid and in liquid media. Ten lipase-producing microorganisms were selected and their taxonomic identification was carried out. From these strains Achremonium murorum, Monascus mucoroides, Arthroderma ciferri, Fusarium poae, Ovadendron sulphureo-ochraceum and Rhodotorula araucariae are described as lipase-producers for the first time. Hydrolysis activity of the crude lipases against both tributyrin and olive oil was measured. Heptyl oleate synthesis was carried out to test the activity of the selected lipases as biocatalysts in organic medium. All the selected lipases were tested as biocatalysts in several organic reactions using unnatural substrates. Lipases from the fungi Fusarium. oxysporum and O. sulphureo-ochraceum gave the best yields and enantioselectivities in the esterification of carboxylic acids. F. oxysporum and Penicillium chrysogenum lipases were the most active ones for the acylation of alcohols without steric hindrance. A. murorum lipase is very useful for the esterification of menthol. F. oxysporum and Fusarium. solani lipases were very stereoselective in the synthesis of carbamates.     

Fatty Acid Specificity in Lipase-Catalyzed Synthesis of Glucoside Esters

The fatty acid specificity of the B-lipase derived from Candida antarctica was investigated in the synthesis of esters of ethyl D-glucopyranoside. The specificity was almost identical with respect to straight-chain fatty acids with 10 to 18 carbon atoms. However, lower fatty acids such as hexanoic and octanoic acid and the unsaturated 9-cis-octadecenoic acid were found to be poor substrates of the enzyme. As a consequence of this selectivity, these fatty acids were accumulated in the unconverted fraction when ethyl D-glucopyranoside was esterified with an excess of a mixture of fatty acids. This accumulation can reduce the overall effectiveness of the process as the activity of the lipase was found to be reduced when exposed to high concentrations of short-chain fatty acids. Finally, using a simplified experimental set-up, the specificity of the C. antarctica B-lipase was compared to the specificity of lipases derived from C. rugosa, Mucor miehei, Humicola, and Pseudomonas. Apart from the C. rugosa lipase, which exhibited a very poor performance, all the enzymes showed a very similar specificity with respect to fatty acids longer than octanoic acid while only the C. antarctica B-lipase showed activity towards sort-chain fatty acids.     

Lipase-catalyzed kinetic resolutions of racemic β- and γ-thiolactones

Several racemic β- and γ-thiolactones were synthesized and kinetic resolutions of them were executed using lipases. While a lipase from Pseudomonas cepacia (PCL) showed the highest enantioselectivity for (S)-form (>99% ee_S at 53% conversion, E > 100) in the kinetic resolution of racemic -methyl-β-propiothiolactone (rac-MPTL), it showed no hydrolysis activity in the kinetic resolution of -benzyl--methyl-β-propiothiolactone (rac-BMPTL), suggesting that the changes in the size of alkyl group from rac-MPTL to rac-BMPTL leads to lower hydrolysis activity and enantioselectivity. In contrast, racemic γ-butyrothiolactones were hydrolyzed by several lipases with low enantioselectivity, whereas a lipase from Candida antarctica (CAL) showed moderate enantioselectivity for (S)-form (>99% ee_S at 76% conversion, E = 11) in the kinetic resolution of racemic -methyl-γ-butyrothiolactone (rac-MBTL). Computer-aided molecular modeling was also performed to investigate the enantioselectivites and activities of PCL toward β-propiothiolactones. The computer modeling results suggest that the alkyl side chains of β-propiothiolactones and γ-butyrothiolactones interact with amino acid residues around hydrophobic crevice, which affects the activity of PCL.     

Biocatalysed synthesis of sn-1,3-diacylglycerol oil from extra virgin olive oil

Enzymatic synthesis of sn-1,3-diacylglycerols (sn-1,3-DAG) in two steps without isolation of the intermediates was investigated. Firstly ethanolysis of extra virgin olive oil (EVO) using immobilized non-regiospecific lipase from Candida antarctica (Novozym 435) was carried out to obtain glycerol (Gly) and fatty acid ethyl esters (FAEE). In the second step the ethanolysis products have been re-esterificated testing different sn-1,3-regiospecific lipases, both immobilized and non-immobilized, in different reaction media, that is in the presence of solvents or in a solvent-free system, for different times, at different temperatures (12, 25 and 40 °C). The lipase from Rhizomucor miehei (Lipozyme IM) has been the most effective among the sn-1,3-specific lipases screened.     

Increased enantioselectivity in the enzymatic hydrolysis of amino acid esters in the ionic liquid 1-butyl-3-methyl-imidazolium tetrafluoroborate

The initial rate and enantioselectivity of enzymatic asymmetric hydrolysis of amino acid esters were examined in methylimidazolium-based ionic liquids with anions including tetrafluoroborate, chloride, bromide and bisulfate and in typical organic solvents. Papain displayed much higher enantioselectivity but lower activity in phosphate buffer solution of 1-butyl-3-methylimidazolium tetrafluoroborate BMIM·BF₄ than in other media tested (i.e. E=100, V ₀=0.21 mM min^-1 in BMIM·BF₄, E=2, V ₀=0.43 mM min^-1 in phosphate buffer, E=14-92, V ₀=0.22-0.25 mM min^-1 in organic solvents for D,L-phenylglycine methyl ester). The influence of BMIM·BF₄ on enzyme activity and enantioselectivity also varied with the substrate and the enzyme used. All of the enzymes assayed showed no activity or low enantioselectivity in the ILs with anions including chloride, bromide and bisulfate.     

The effect of substrate polarity on the lipase-catalyzed synthesis of aroma esters in solvent-free systems

The aim of this study was to compare activities of commercial lipases in synthesis of various esters in solvent-free system and in isooctane. Moreover, the effect of substrate polarity (expressed as log P) on solvent-free synthesis was investigated. The decrease of yields of esters of butanoic acid in absence of organic solvent was observed, while similarly high yields were noticed in synthesis of esters of octanoic acid in both systems (solvent-free and organic solvent). The kinetic analysis has shown that ester synthesis can be described with Ping-pong bi-bi kinetics. In a case of esterification of butanoic acid in solvent-free system additional term, which represents enzyme inactivation by acid substrate, must be included. It was found out that log P of initial substrate mixture was in linear correlation with kcat of ester synthesis, while final yields depend only on type of acid substrate. Each of the examined lipases showed similar properties, although immobilized lipase from Rhizomucor miehei was slightly more resistant to harmful influence of butanoic acid. Finally, it was also shown that detrimental influence of butanoic acid could be circumvented by two-step addition of acid substrate in reaction catalyzed with immobilized lipase from R. miehei.     

Isolation and characterization of a metagenome-derived and cold-active lipase with high stereospecificity for (R)-ibuprofen esters

We report on the isolation and biochemical characterization of a novel, cold-active and metagenome-derived lipase with a high stereo-selectivity for pharmaceutically important substrates. The respective gene was isolated from a cosmid library derived from oil contaminated soil and designated lipCE. The deduced aa sequence indicates that the protein belongs to the lipase family l.3, with high similarity to Pseudomonas fluorescens lipases containing a C-terminal secretion signal for ABC dependent transport together with possible motifs for Ca²⁺-binding sites. The overexpressed protein revealed a molecular weight of 53.2 kDa and was purified by refolding from inclusion bodies after expression in Escherichia coli. The optimum temperature of LipCE was determined to be 30 °C. However, the enzyme still displayed 28% residual activity at 0 °C and 16% at −5 °C. Calcium ions strongly increased activity and thermal stability of the protein. Further detailed biochemical characterization of the recombinant enzyme showed an optimum pH of 7 and that it retained activity in the presence of a range of metal ions and solvents. A detailed analysis of the enzyme's substrate spectrum with more than 34 different substrates indicated that the enzyme was able to hydrolyze a wide variety of substrates including the conversion of long chain fatty acid substrates with maximum activity for pNP-caprate (C₁₀). Furthermore LipCE was able to hydrolyze stereo-selectively ibuprofen-pNP ester with a high preference for the (R) enantiomer of >91% ee and it demonstrated selectivity for esters of primary alcohols, whereas esters of secondary or tertiary alcohols were nearly not converted.     

Evaluation of strains of Geotrichum candidum for lipase production and fatty acid specificity

Summary Three strains of Geotrichum candidum (ATCC 34614, NRRL Y-552 and NRRL Y-553) were examined for lipase production and activity. Variables including medium, pH, temperature, agitation rate and incubation time were examined to define the optimal culture conditions. Growth on oil in complex medium at 30°C, 300 rpm, and pH 7 produced maximal lipase activity. Fatty acid specificity of these strains and of two crude G. candidum enzyme preparations (lipase 26557 RP, Rhône Poulenc and lipase GC-4, Amano) was measured using equimolar mixtures of methyl or butyl esters of palmitic and oleic acids. The lipase from NRRL Y-553 and lipase 26557 RP displayed preferential specificity for hydrolyzing oleic acid esters, while the lipases from ATCC 34614, NRRL Y-552 and lipase GC-4 failed to discriminate between plamitic and oleic acids.     

Characterization of three distinct forms of lipolytic enzyme in a commercialCandida lipase preparation

Summary Three distinct forms of lipolytic enzyme were identified in a commercialCandida lipase preparation. Two of these lipases (lipases A & C) were isolated and characterized. Lipase A had a higher optimal reaction pH and a better thermal stability than those of lipase C. Lipase A and C displayed different acyl chain length specificity on the lipolysis of p-nitrophenol esters.     

Lipase-catalysed hydrolysis of short-chain substrates in solution and in emulsion: a kinetic study.

We have studied the enzymatic hydrolysis of solutions and emulsions of vinyl propionate, vinyl butyrate and tripropionin by lipases of various origin and specificity. Kinetic studies of the hydrolysis of short-chain substrates by microbial triacylglycerol lipases from Rhizopus oryzae, Mucor miehei, Candida rugosa, Candida antarctica A and by (phospho)lipase from guinea-pig pancreas show that these lipolytic enzymes follow the Michaelis-Menten model. Surprisingly, the activity against solutions of tripropionin and vinyl esters ranges from 70% to 90% of that determined against emulsions. In contrast, a non-hyperbolic (sigmoidal) dependence of enzyme activity on ester concentration is found with human pancreatic lipase, triacylglycerol lipase from Humicola lanuginosa (Thermomyces lanuginosa) and partial acylglycerol lipase from Penicillium camembertii and the same substrates. In all cases, no abrupt jump in activity (interfacial activation) is observed at substrate concentration corresponding to the solubility limit of the esters. Maximal lipolytic activity is always obtained in the presence of emulsified ester. Despite progress in the understanding of structure-function of lipases, interpretation of the mode of action of lipases active against solutions of short-chain substrates remains difficult. Actually, it is not known whether these enzymes, which possess a lid structure, are in open or/and closed conformation in the bulk phase and whether the opening of the lid that gives access to the catalytic triad is triggered by interaction of the enzyme molecule with monomeric substrates or/and multimolecular aggregates (micelles) both present in the bulk phase. From the comparison of the behaviour of lipases used in this study which, in some cases, follow the Michaelis-Menten model and, in others, deviate from classical kinetics, it appears that the activity of classical lipases against soluble short-chain vinyl esters and tripropionin depends not only on specific interaction with single substrate molecules at the catalytic site of the enzyme but also on physico-chemical parameters related to the state of association of the substrate dispersed in the aqueous phase. It is assumed that the interaction of lipase with soluble multimolecular aggregates of tripropionin or short-chain vinyl esters or the formation of enzyme-substrate mixed micelles with ester bound to lipase, might represent a crucial step that triggers the structural transition to the open enzyme conformation by displacement of the lid.