Properties and application of a partially purified alkaline xylanase from an alkalophilic fungus Aspergillus nidulans KK-99

An alkalophilic Aspergillus nidulans KK-99 produced an alkaline, thermostable xylanase (40 IU/ml) in a basal medium supplemented with wheat bran (2% w/v) and KNO3 (at 0.15% N) pH 10.0 and 37 degrees C. The partially purified xylanase was optimally active at pH 8.0 and 55 degrees C. The xylanase was stable in a broad pH range of 4.0-9.5 for 1 h at 55 degrees C, retaining more than 80% of its activity. The enzyme exhibited greater binding affinity for xylan from hardwood than from softwood. The xylanase activity was stimulated (+25%) by Na+ and Fe2+ and was strongly inhibited (maximum by 70%) by Tween-20, 40, 60, SDS, acetic anhydride, phenylmethane sulphonyl fluoride, Triton-X-100. The xylanase dose of 1.0 IU/g dry weight pulp gave optimum bleach boosting of Kraft pulp at pH 8.0 and temperature 55 degrees C for 3 h reaction time.     

Improvement of the thermostability and catalytic activity of a mesophilic family 11 xylanase by N-terminus replacement

To improve the thermostability and catalytic activity of Aspergillus niger xylanase A (AnxA), its N-terminus was substituted with the corresponding region of Thermomonospora fusca xylanase A (TfxA). The constructed hybrid xylanase, named ATx, was overexpressed in Pichia pastoris and secreted into the medium. After 96-h 0.25% methanol induction, the activity of the ATx in the culture supernatant reached its peak, 633 U/mg, which was 3.6 and 5.4 times as high as those of recombinant AnxA (reAnxA) and recombinant TfxA (reTfxA), respectively. Studies on enzymatic properties showed that the temperature and pH optimum of the ATx were 60 degrees C and 5.0, respectively. The ATx was more thermostable, when it was treated at 70 degrees C, pH 5.0, for 2 min, the residual activity was 72% which was higher than that of reAnxA and similar to that of reTfxA. The ATx was very stable over a broader pH range (3.0-10.0) and much less affected by acid/base conditions. After incubation at pH 3.0-10.0, 25 degrees C for 1 h, all the residual activities of the ATx were over 80%. These results revealed that the thermostability and catalytic activity of the AnxA were enhanced. The N-terminus of TfxA contributed to the observed thermostability of itself and the ATx, and to the high activity of the ATx. Replacement of N-terminus between mesophilic eukaryotic and thermostable prokaryotic enzymes may be a useful method for constructing the new and improved versions of biologically active enzymes.     

Thermal stability of beta-xylanases produced by different Thermomyces lanuginosus strains

The thermostability of beta-xylanases produced by nine thermophilic Thermomyces lanuginosus strains in a coarse corn cob medium was assessed. The xylanase produced by T. lanuginosus strain SSBP retained 100% of its activity after 6 h at temperatures up to 65 degrees C. In comparison seven ATCC strains and the DSM 5826 strain of T. lanuginosus only retained 100% xylanase activity at temperatures up to 60 degrees C. Culture filtrates of T. lanuginosus strain SSBP grown on coarse corn cobs, oatspelts xylan, birchwood xylan, wheatbran, locust beangum, and sugar cane bagasse, retained 100% xylanase activity at temperatures up to 60 degrees C. The xylanase produced on corn cobs was the most thermostable and showed an increase of approximately 6% from 70 degrees C to 80 degrees C. The T(1/2) of all strains at 70 degrees C at pH 6.5 varied greatly from 63 min for strain ATCC 28083 to 340 min for strain SSBP. The xylanase of strain SSBP was much less thermostable at pH 5.0 and pH 12.0 with T(1/2) values of 11.5 min and 15 min, respectively at 70 degrees C. At 50 degrees C, the enzyme of T. lanuginosus strain SSBP produced on coarse corn cobs was stable within the pH range of 5.5-10.0. Furthermore, the enzyme retained total activity at 60 degrees C for over 14 days and at 65 degrees C for over 48 h. The xylanase of T. lanuginosus strain SSBP possesses thermo- and pH stability properties that may be attractive to industrial application.     

Thermostable xylanase from Marasmius sp.: purification and characterization

We have screened 766 strains of fungi from the BIOTEC Culture Collection (BCC) for xylanases working in extreme pH and/or high temperature conditions, the so-called extreme xylanases. From a total number of 32 strains producing extreme xylanases, the strain BCC7928, identified by using the internal transcribed spacer (ITS) sequence of rRNA to be a Marasmius sp., was chosen for further characterization because of its high xylanolytic activity at temperature as high as 90 degrees C. The crude enzyme possessed high thermostability and pH stability. Purification of this xylanase was carried out using an anion exchanger followed by hydrophobic interaction chromatography, yielding the enzyme with >90% homogeneity. The molecular mass of the enzyme was approximately 40 kDa. The purified enzyme retained broad working pH range of 4-8 and optimal temperature of 90 degrees C. When using xylan from birchwood as substrate, it exhibits Km and Vmax values of 2.6 +/- 0.6 mg/ml and 428 +/- 26 U/mg, respectively. The enzyme rapidly hydrolysed xylans from birchwood, beechwood, and exhibited lower activity on xylan from wheatbran, or celluloses from carboxymethylcellulose and Avicel. The purified enzyme was highly stable at temperature ranges from 50 to 70 degrees C. It retained 84% of its maximal activity after incubation in standard buffer containing 1% xylan substrate at 70 degrees C for 3 h. This thermostable xylanase should therefore be useful for several industrial applications, such as agricultural, food and biofuel.     

Production and biochemical characterization of a novel cellulase-poor alkali-thermo-tolerant xylanase from <Emphasis Type="Italic">Coprinellus disseminatus</Emphasis> SW-1 NTCC 1165

Fungi producing xylanases are plentiful but alkali-thermo-tolerant fungi producing cellulase-poor xylanase are rare. Out of 12 fungal strains isolated from various sources, Coprinellus disseminatus SW-1 NTCC 1165 yielded the highest xylanase activity (362.1 IU/ml) with minimal cellulase contamination (0.64 IU/ml). The solid state fermentation was more effective yielding 88.59% higher xylanase activity than that of submerged fermentation. An incubation period of 7 days at 37°C and pH 6.4 accelerated the xylanase production up to the maximum level. Among various inexpensive agro-residues used as carbon source, wheat bran induced the maximum xylanase titres (469.45 IU/ml) while soya bean meal was the best nitrogen source (478.5 IU/ml). A solid substrate to moisture content ratio of 1:3 was suitable for xylanase production while xylanase titre was repressed with the addition of glucose and lactose. The xylanase and laccase activities under optimized conditions were 499.60 and 25.5 IU/ml, respectively along with negligible cellulase contamination (0.86 IU/ml). Biochemical characterization revealed that optimal xylanase activity was observed at pH 6.4 and temperature 55°C and xylanase is active up to pH 9 (40.33 IU/ml) and temperature 85°C (48.81 IU/ml). SDS–PAGE and zymogram analysis indicated that molecular weight of alkali-thermo-tolerant xylanase produced by C. disseminatus SW-1 NTCC 1165 was 43 kDa.     

Expression of recombinant Bacillus licheniformis xylanase A in Pichia pastoris and xylooligosaccharides released from xylans by it

The mature peptide of Bacillus licheniformis xylanase A (BlxA) was successfully expressed in Pichia pastoris under the control of AOX1 promoter. After 96-h 0.25% methanol induction, the activity of recombinant B. licheniformis xylanase A (reBlxA) in culture supernatant was 122.9 U/mg. Enzymatic properties assays showed that the optimum temperature and pH for reBlxA were 60 degrees C and pH 6.0, respectively. When treated at 70 degrees C, pH 6.0 for 2 min, the residual activities of the reBlxA were 76%. Over 80% of reBlxA activity was retained after treatment of the enzyme by preincubation over a pH range of 5.0-9.0 for 1h at 25 degrees C. High performance liquid chromatography (HPLC) analysis revealed that xylotriose (X3) was the main hydrolysis product released from birchwood xylan and wheat bran insoluble xylan by reBlxA. The mode of action studies showed that reBlxA was an endo-acting xylanase and xylobiose (X2), xylotriose, xylotetraose (X4), xylopentaose (X5), and xylohexaose (X6) could be hydrolyzed by it. This is the first report on the expression of reBlxA in yeast and on determining and quantifying the hydrolysis products released from xylans by reBlxA.     

Expression of recombinant Aspergillus niger xylanase A in Pichia pastoris and its action on xylan

The mature peptide of Aspergillus niger xylanase A (AnxA) was successfully expressed in Pichia pastoris at high levels under the control of AOX1 promoter. The recombinant AnxA (reAnxA) was secreted into culture medium. After 96-h 0.25% methanol induction, the activity of reAnxA in the culture supernatant reached the peak, 175 U/mg, which was 1.9 times as high as that of the native AnxA (92 U/mg). Studies on enzymatic properties showed that the optimum temperature and optimum pH of reAnxA were 50 degrees C and 5.0, respectively. The reAnxA was very stable in a wide pH range of 3.0-8.0. After incubation at the pH 3.0-8.0, 25 degrees C for 1h, all the residual activities of reAnxA were over 80%. The K(m) and k(cat) values for reAnxA were 4.8 mg/ml and 123.2s(-1), respectively. HPLC analysis showed that xylotriose was the main hydrolysis product of birchwood xylan and bran insoluble xylan by reAnxA.     

通过N端替换提高木聚糖酶的热稳定性

以来源于Thermomonospora fusca的耐高温木聚糖酶TfxA和来源于Streptomycesolivaceoviridis的高比活木聚糖酶XYNB为亲本,构建出耐热高比活融合木聚糖酶TB,将TB在大肠杆菌BL21和毕赤酵母GS115中进行表达并对表达产物的酶学性质进行分析比较。分析表明,融合蛋白TB最适pH值为6.0,最适温度为70℃,较XYNB有大幅度的提高;在热稳定性方面,TB明显优于XYNB,将两种稀释好的酶液分别在80℃和90℃下热处理3min,TB的热稳定性较XYNB提高了6倍左右;TB的pH稳定性为5～9(相对剩余活性在50%以上的pH范围),较XYNB有所下降,但两者的比活性基本不变,保持了亲本XYNB的高比活性。通过同源建模和序列比较,分析了可能影响融合蛋白TB酶学性质的因素,为进一步研究木聚糖酶的结构与功能提供了新的思路。     

Isolation, purification, and characterization of a thermostable xylanase from a novel strain, Paenibacillus campinasensis G1-1

High levels of xylanase activity (143.98 IU/ml) produced by the newly isolated Paenibacillus campinasensis G1-1 were detected when it was cultivated in a synthetic medium. A thermostable xylanase, designated XynG1-1, from P. campinasensis G1-1 was purified to homogeneity by Octyl-Sepharose hydrophobic-interaction chromatography, Sephadex G75 gel-filter chromatography, and Q-Sepharose ion-exchange chromatography, consecutively. By multistep purification, the specific activity of XynG1-1 was up to 1,865.5 IU/mg with a 9.1-fold purification. The molecular mass of purified XynG1-1 was about 41.3 kDa as estimated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Sequence analysis revealed that XynG1-1 containing 377 amino acids encoded by 1,134 bp genomic sequences of P. campinasensis G1-1 shared 96% homology with XylX from Paenibacillus campinasensis BL11 and 77%~78% homology with xylanases from Bacillus sp. YA- 335 and Bacillus sp. 41M-1, respectively. The activity of XynG1-1 was stimulated by Ca2+, Ba2+, DTT, and beta- mercaptoethanol, but was inhibited by Ni2+, Fe2+, Fe3+, Zn2+, SDS, and EDTA. The purified XynG1-1 displayed a greater affinity for birchwood xylan, with an optimal temperature of 60 degrees C and an optimal pH of 7.5. The fact that XynG1-1 is cellulose-free, thermostable (stability at high temperature of 70 degrees C~80 degrees C), and active over a wide pH range (pH 5.0~9.0) suggests that the enzyme is potentially valuable for various industrial applications, especially for pulp bleaching pretreatment.     

Studies on xylan degrading enzyme from Chainia

Summary The sclerotial actinomycete Chainia (NCL 82-5-1) secreted extracellular xylanase in submerged culture in media containing yeast extract and wheat bran or commercial xylan. A high activity (28 IU/ml) of xylanase was obtained in 72 h on a medium containing 3% xylan. Only a single species of xylanase (i.e. without isoenzymes) was detected by polyacrylamide gel electrophoresis. It had an optimum pH of 5.0 and optimum temperature of 65°C. It was stable at pH 6.0 to heating at 60°C for 10 min. Its pI was 8.0 and the K_m was 0.4%. The results are discussed in relation to xylanase reported from actinomycetes such as Streptomyces xylophagus.     

Studies on carboxymethyl cellulase produced by an alkalothermophilic actinomycete

A novel alkalothermophilic actinomycete having optimum growth at pH 9 and 50 degrees C was isolated from self-heating compost from the Barabanki district of Uttar Pradesh, India. Based on its morphology, susceptibility of spores to heat and novobiocin, guaninecytosine content of chromosomal DNA and cell wall composition, the organism was classified under Thermomonospora. The alkalothermophilic actinomycete produced 23 IU/ml carboxymethyl cellulase (CMCase). The CMCase was purified by fractional ammonium sulphate precipitation followed by cellulose affinity chromatography and Sephacryl S-200 gel filtration. The CMCase had a molecular weight of 38 KD and pI of 4.1. The enzyme exhibited optimum activity at pH 5 and temperature 50 degrees C. The CMCase showed pH stability in the range 7-10. The enzyme retained 100% activity at 50 degrees C for 72 h and had half-lives of 7 and 3 h at 60 degrees C and 70 degrees C, respectively. The CMCase was stable in the presence of commercial detergents such as Ariel, Henko and Surf Excel, indicating its potential as an additive to laundry detergents.     

Xylanase from the extremely thermophilic bacterium "Caldocellum saccharolyticum": overexpression of the gene in Escherichia coli and characterization of the gene product

A xylanase encoded by the xynA gene of the extreme thermophile "Caldocellum saccharolyticum" was overexpressed in Escherichia coli by cloning the gene downstream from the temperature-inducible lambda pR and pL promoters of the expression vector pJLA602. Induction of up to 55 times was obtained by growing the cells at 42 degrees C, and the xylanase made up to 20% of the whole-cell protein content. The enzyme was located in the cytoplasmic fraction in E. coli. The temperature and pH optima were determined to be 70 degrees C and pH 5.5 to 6, respectively. The xylanase was stable for at least 72 h if incubated at 60 degrees C, with half-lives of 8 to 9 h at 70 degrees C and 2 to 3 min at 80 degrees C. The enzyme had high activity on xylan and ortho-nitrophenyl beta-D-xylopyranoside and some activity on carboxymethyl cellulose and para-nitrophenyl beta-D-cellobioside. The gene was probably expressed from its own promoter in E. coli. Translation of the xylanase overproduced in E. coli seemed to initiate at a GTG codon and not at an ATG codon as previously determined.     

Production of feed enzymes (phytase and plant cell wall hydrolyzing enzymes) by<Emphasis Type="Italic">Mucor indicus</Emphasis> MTCC 6333: Purification and characterization of phytase

The production of phytase and associated feed enzymes (phosphatase, xylanase, CMCase, alpha-amylase and beta-glucosidase) was determined in a thermotolerant fungus Mucor indicus MTCC 6333, isolated from composting soil. Solid-substrate culturing on wheat bran and optimizing other culture conditions (C and N sources, level of N, temperature, pH, culture age, inoculum level), increased the yield of phytase from 266 +/- 0.2 to 513 +/- 0.4 nkat/g substrate dry mass. The culture extract also contained 112, 194, 171, 396, and 333 nkat/g substrate of phosphatase, xylanase, CMCase, beta-glucosidase and alpha-amylase activities, respectively. Simple 2-step purification employing anion exchange and gel filtration chromatography resulted in 21.9-fold purified phytase. The optimum pH and temperature were pH 6.0 and 70 degrees C, respectively. The phytase was thermostable under acidic conditions, showing 82% residual activity after exposure to 60 degrees C at pH 3.0 and 5.0 for 2 h, and displayed broad substrate specificity. The Km was 200 nmol/L and v(lim) of 113 nmol/s per mg protein with dodecasodium phytate as substrate. In vitro feed trial with feed enzyme resulted in the release of 1.68 g inorganic P/kg of feed after 6 h of incubation at 37 degrees C.     

A cellulase-free xylanase from alkali-tolerantAspergillus fischeri Fxn1

Summary An alkali-tolerant fungusAsperqillus fischeri Fxn1 isolated from xylan enrichment grew in the pH range 5–10 and secreted an extracellular cellulase-free xylanase. Arabinose, lactose, maltose, cellobiose and glucose induced low levels of xylanase (1.8–9.0 IU/ml), whereas xylose, xylan and wheat bran induced higher level (34–45 IU/ml).CMcellulose and FPcellulose did not support growth. The optimum pH of xylanase was 6.0–6.5 and it was stable in a wide range of pH 5–9.5. The optimum temperature was 60°C and it was stable upto 55°C. The half-lives at 50 and 55 °C were 240 and 40 min. respectively. This enzyme released reducing sugars from pulp at pH 9.0 and 40°C.     

Production and optimization of cellulase-free, alkali-stable xylanase by Bacillus pumilus SV-85S in submerged fermentation

This paper reports the production of a cellulase-free and alkali-stable xylanase in high titre from a newly isolated Bacillus pumilus SV-85S using cheap and easily available agro-residue wheat bran. Optimization of fermentation conditions enhanced the enzyme production to 2995.20 ± 200.00 IU/ml, which was 9.91-fold higher than the activity under unoptimized basal medium (302.2 IU/ml). Statistical optimization using response-surface methodology was employed to obtain a cumulative effect of peptone, yeast extract, and potassium nitrate (KNO₃) on enzyme production. A 2³ central composite design best optimized the nitrogen source at the 0 level for peptone and yeast extract and at the −α level for KNO₃, along with 5.38-fold increase in xylanase activity. Addition of 0.1% tween 80 to the medium increased production by 1.5-fold. Optimum pH for xylanase was 6.0. The enzyme was 100% stable over the pH range from 5 to 11 for 1 h at 37°C and it lost no activity, even after 3 h of incubation at pH 7, 8, and 9. Optimum temperature for the enzyme was 50°C, but the enzyme displayed 78% residual activity even at 65°C. The enzyme retained 50% activity after an incubation of 1 h at 60°C. Characteristics of B. pumilus SV-85S xylanase, including its cellulase-free nature, stability in alkali over a long duration, along with high-level production, are particularly suited to the paper and pulp industry.     

Optimisation of culture medium and conditions for alpha-l-Arabinofuranosidase production by the extreme thermophilic eubacterium Rhodothermus marinus

The culture medium for Rhodothermus marinus was optimised on a shake-flask scale by using statistical factorial designs for enhanced production of a highly thermostable alpha-L-arabinofuranosidase (AFase). The medium containing 3.6 g/l birch wood xylan and 8.2 g/l yeast extract yielded a maximum of 110 nkat/ml AFase activity together with 125 nkat/ml xylanase and 65 nkat/ml beta-xylosidase activity. In addition, low levels of beta-mannanase (30 nkat/ml), alpha-galactosidase (0.2 nkat/ml), beta-galactosidase (0.3 nkat/ml), endoglucanase (5 nkat/ml) and beta-glucosidase (30 nkat/ml) were detected in the culture filtrate. Among the various carbon sources tested, birchwood xylan was most effective for the formation of AFase and xylanase activities, followed by oat spelt and beechwood xylans, and xylan-rich lignocelluoses (e.g., starch-free sugar beet pulp and wheat bran). Constitutive levels of enzyme activities were detected when the bacterium was grown on other polysaccharides and low-molecular-weight carbohydrates. A fermentation in a 5-l fermenter (3-l working volume) using the optimised medium yielded 60 nkat/ml AFase associated with 65 nkat/ml xylanase and 35 nkat/ml beta-xylosidase activities. The crude AFase displayed optimal activity between pH 5.5 and 7 and at 85 degrees C. It had half-lives of 8.3 h at 85 degrees C and 17 min at 90 degrees C. It showed high stability between pH 5 and 9 (24 h at 65 degrees C). The combined use of AFase-rich xylanase and mannanase from R. marinus in the prebleaching of softwood kraft pulp gave a brightness increase of 1.8% ISO. To our knowledge, this is the first report on the production of a high AFase activity by an extreme thermophilic bacterium and this enzyme is the most thermostable AFase reported so far.     

Draw-fill batch culture mode for production of xylanases by <Emphasis Type="Italic">Cellulomonas flavigena</Emphasis> on sugar cane bagasse

Draw-fill culture was evaluated as a method for xylanase production by Cellulomonas flavigena on sugar cane bagasse. Specific xylanase activity and volumetric xylanase activities were measured by harvesting 50%, 55%, 60% and 70% of fermented broth at the end of each subculture. Maximum specific (64 IU mg(-1) protein) and volumetric (166 IU ml(-1)) xylanase activities were obtained by harvesting 50-55% of broth. Values were 3.4 and 3.8 times greater than those obtained in batch cultures carried out under the same conditions. Enzyme productivity of 4.2 IU ml(-1) h(-1) was significantly greater than that obtained in continuous cultures (2.4 IU ml(-1) h(-1)) (P<0.05).     

High-level expression, purification, and characterization of recombinant wheat xylanase inhibitor TAXI-I secreted by the yeast Pichia pastoris

Triticum aestivum xylanase inhibitor I (TAXI-I) is a wheat protein that inhibits microbial xylanases belonging to glycoside hydrolase family 11. In the present study, recombinant TAXI-I (rTAXI-I) was successfully produced by the methylotrophic yeast Pichia pastoris at high expression levels (approximately 75 mg/L). The rTAXI-I protein was purified from the P. pastoris culture medium using cation exchange and gel filtration chromatographic steps. rTAXI-I has an iso-electric point of at least 9.3 and a mass spectrometry molecular mass of 42,013 Da indicative of one N-linked glycosylation. The recombinant protein fold was confirmed by circular dichroism spectroscopy. Xylanase inhibition by rTAXI-I was optimal at 20-30 degrees C and at pH 5.0. rTAXI-I still showed xylanase inhibition activity at 30 degrees C after a 40 min pre-incubation step at temperatures between 4 and 70 degrees C and after 2 h pre-incubation at room temperature at a pH ranging from 3.0 to 12.0, respectively. All tested glycoside hydrolase family 11 xylanases were inhibited by rTAXI-I whereas those belonging to family 10 were not. Specific inhibition activities against family 11 Aspergillus niger and Bacillus subtilis xylanases were 3570 and 2940IU/mg protein, respectively. The obtained biochemical characteristics of rTAXI-I produced by P. pastoris (no proteolytical cleft) were similar to those of natural TAXI-I (mixture of proteolytically processed and non-processed forms) and non-glycosylated rTAXI-I expressed in Escherichia coli. The present results show that xylanase inhibition activity of TAXI-I is only affected to a limited degree by its glycosylation or proteolytic processing.     

Secretory expression in Escherichia coli and single-step purification of a heat-stable alkaline protease

Bacteriocin release proteins (BRPs) can be used for the release of heterologous proteins from the Escherichia coli cytoplasm into the culture medium. The gene for a highly thermostable alkaline protease was cloned from Bacillus stearothermophilus F1 by the polymerase chain reaction. The recombinant F1 protease was efficiently excreted into the culture medium using E. coli XL1-Blue harboring two vectors: pTrcHis bearing the protease gene and pJL3 containing the BRPs. Both vectors contain the E. coli lac promoter-operator system. In the presence of 40 microM IPTG, the recombinant F1 protease and the BRP were expressed and mature F1 protease was released into the culture medium. This opens the way for the large-scale production of this protease in E. coli. The recombinant enzyme was purified through a one-step heat treatment at 70 degrees C for 3h and this method purified the protease to near homogeneity. The purified enzyme showed a pH optimum of 9.0, temperature optimum of 80 degrees C, and was stable at 70 degrees C for 24h in the pH range from 8.0 to 10.0. The enzyme exhibited a high degree of thermostability with a half-life of 4 h at 85 degrees C, 25 min at 90 degrees C, and was inhibited by the serine protease inhibitor phenylmethylsulfonyl fluoride (PMSF).