Effects of gel concentration, human fibronectin, and cation supplement on the tissue-engineered cartilage

Cultivation of bovine knee chondrocytes (BKCs) in various cationic additives was studied using chitosan-gelatin scaffolds, whose surfaces were modified by human fibronectin (HFN). Here, the genipin-crosslinked scaffolds were fabricated by the freezing/lyophilization method with various concentrations of the precursory gels. The experimental results indicated that a lower freezing temperature led to higher moisture content, porosity, and specific surface area of a scaffold. The higher the precursor concentration, the larger the moisture content of a scaffold. A fast biodegradation of scaffold matrix was generated by a high porosity with BKCs. A higher concentration of HFN coated on scaffold surfaces yielded a faster rate of BKC attachment from the culture medium. The amounts of BKCs, glycosaminoglycans, and collagen over 28-day cultivation increased with the scaffold porosity, the coating concentration of HFN, the seeding density of BKCs, and the calcium concentration in medium.     

Chondrogenesis of articular chondrocytes in hydroxyapatite/chitin/chitosan scaffolds supplemented with pituitary extract

This study analyzes the effects of pituitary extract supplement on the cultivation of bovine knee chondrocytes (BKCs) in three‐dimensional chitin/chitosan biomaterials. Transforming growth factor‐β1 (TGF‐β1) in the supplement was identified by Western blot near 23 kDa, and the immunoassayed concentration of TGF‐β1 in the supplement was about 33 ng/mL. The typical pore diameter of the chitin/chitosan scaffolds was 250 μm, indicating an apposite void space for chondrocyte growth. The characteristic width of needlelike hydroxyapatite crystals was 85 nm after chemical co‐precipitation of hydroxyapatite on the pore surfaces of the scaffolds. Over 4‐wk cultivation, the amounts of proliferated BKCs, secreted glycosaminoglycans and produced collagen were improved with the concentration of TGF‐β1 in culture medium. In addition, the cultivated constructs revealed mature neocartilage with lacunas enclosing BKCs, demonstrating chondrogenesis. Pituitary extract supplement was more efficient in the synthesis of extracellular matrix than pure TGF‐β1. Hence, an appropriate addition of the supplement can enhance the formation of cartilaginous components in the scaffolds to regenerate articular cartilage.     

Effects of composition, solvent, and salt particles on the physicochemical properties of polyglycolide/poly(lactide-co-glycolide) scaffolds

Polyglycolide (PGA)/poly(lactide-co-glycolide) (PLGA) scaffolds were fabricated by a solvent casting/particulate leaching method using hexafluoroisopropanol (HFIP) or acetone for material dissolution and NaCl particles as porogen. The results revealed that the mechanical strength increased as the PGA percentage in a HFIP-processed scaffold increased. Chemical ingredients did not substantially affect the mechanical strength of acetone-processed scaffolds. Large NaCl particles led to weak mechanical strength, low porosity, and small specific surface area. For a fixed composition, PGA crystals in a HFIP-processed scaffold were smaller than those in an acetone-processed scaffold. High PGA fractions yielded partly fused PGA/PLGA scaffolds. A faster degradation rate of a scaffold could result from a higher PGA percentage, smaller NaCl particles, or the existence of chondrocytes. The combination of PGA and PLGA, which compensated each other for bioactivity, would be beneficial to cartilage regeneration.     

Application of polyethyleneimine‐modified scaffolds to the regeneration of cartilaginous tissue

In this study, we analyzed the physicochemical and biophysical properties of three‐dimensional scaffolds modified using polyethyleneimine (PEI) and applied these scaffolds to the cultivation of bovine knee chondrocytes (BKCs). PEI was crosslinked in the bulk or on the surface of the ternary scaffolds comprising polyethylene oxide, chitin and chitosan. The results revealed that when the concentration of PEI was less than 300 μg/mL, the cytotoxicity of a scaffold was on the same order in the two method of modification. An increase in the concentration of PEI favored the adhesion of BKCs. When the amount of PEI in scaffolds is fixed, the surface‐modified scaffolds exhibited a higher adhesion efficiency of BKCs than the bulk‐modified scaffolds. For the regeneration of cartilaginous components, a higher amount of PEI in a scaffold yielded larger amounts of proliferated BKCs, secreted glycosaminoglycans, and produced collagen. In addition, the formation of neocartilage in the surface‐modified scaffolds was more effective than that in the bulk‐modified scaffolds. These tissue‐engineered scaffolds, modified by an appropriate concentration of PEI, can be potentially applied to cartilage repair in clinical trials. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Cultivation of measles virus on bovine kidney cells: Comparative study on viral yield

The present investigation sought the use of Bovine Kidney Cells (BKC) which is a readily available substrate for the cultivation and isolation of measles virus. Results showed that measles virus grew well on BKC, showing identical cytopathologic effect (CPE) of syncytial and giant cell formation also noted for Vero cells. However, the growth on Vero cells was faster indicating a better sensitivity to the measles virus than BKC. The virus replicated and produced CPE in both confluent monolayer and trypsin dispersed cultures. The ability of the virus to form CPE was faster in trypsin-dispersed cells than confluent monolayers. The viral yield in Vero- and BK-cells were compared to assess any difference by analysis of variance. The F-value of 0.824 with degree of freedom 1.34 showed no significant difference at any reasonable confidence interval.     

Cartilage regeneration by novel polyethylene oxide/chitin/chitosan scaffolds

This study presents the application of novel PEO/chitin/chitosan scaffolds for the cultivation of bovine knee chondrocytes (BKCs). The results reveled that the composition strongly affected physicochemical characteristics of the ternary scaffolds. Based on the contours of porosity, the percentage of void space in these scaffolds was estimated to be higher than 90%. In regard to mechanical strength, the composition of 50% chitin and 50% chitosan in the scaffold led to the maximum of Young's modulus. Moreover, large extensibility of the scaffolds occurred at the following range of the composition: PEO > 37.5%, chitin < 25%, and chitosan <62.5%. After cultivation of BKCs over 4 weeks, the percentage of biodegradation was normally between 30 and 60%. The formation of neocartilage was assessed by the amounts of BKCs, glycosaminoglycans and collagens in the cultured BKC-polymer constructs. Better chondrogenesis was obtained at the following range of the composition: 25% < PEO < 40%, 12.5% < chitin < 37.5%, and 30% < chitosan < 50%. Thus, the regeneration of cartilaginous components could be manipulated simply by controlling the composition of PEO, chitin, and chitosan in the hybrid scaffolds.     

Selective growth and serial passage of mouse melanocytes from neonatal epidermis in a medium supplemented with bovine pituitary extract

Suspensions of disaggregated epidermal cells from skins of newborn C57BL/10JHir mice were plated in a growth medium that consisted of Ham's F-10 plus bovine pituitary extract (BPE), insulin, and transferrin. Fetal bovine serum (FBS) was added to the culture medium at a concentration of 4% at the time of plating. On the second day of culture, a small number of melanocytes was randomly distributed among large sheets of keratinocytes. From the third day onward, FBS was excluded from the culture medium to prevent the proliferation of keratinocytes and fibroblasts. The melanocytes began to grow preferentially, and after 12 days pure and enriched populations of melanocytes could be harvested. In the absence of the proliferation of keratinocytes and fibroblasts, melanocytes could be serially passaged in the growth medium supplemented with a conditioned medium (CM) prepared from keratinocyte-enriched cultures, namely, those at the early stages of the primary culture. FBS was added at a concentration of 1% for the first day. These results suggest that both BPE and keratinocyte CM contain growth factors required for proliferation of melanocytes.     

Long-term culture of tissue engineered cartilage in a perfused chamber with mechanical stimulation

One approach to functional tissue engineering of cartilage is to utilize bioreactors to provide environmental conditions that stimulate chondrogenesis in cells cultured on biomaterial scaffolds. We report the combined use of a three-dimensional in vitro model and a novel bioreactor with perfusion of culture medium and mechanical stimulation in long-term studies of cartilage development and function. To engineer cartilage, scaffolds made of a non-woven mesh of polyglycolic acid (PGA) were seeded with bovine calf articular chondrocytes, cultured for an initial 30-day period under free swelling conditions, and cultured for an additional 37 day period in one of the three groups: (1) free-swelling, (2) static compression (on 24 h/day, strain control, static offset 10%), and (3) dynamic compression (on 1 h/day; off 23 h/day; strain control, static offset 2%, dynamic strain amplitude 5%; frequency 0.3 Hz). Constructs were sampled at timed intervals and assessed with respect to structure, biochemical composition, and mechanical function. Mechanical simulation had little effect on the compositions, morphologies and on mechanical properties of construct interiors discs, but it resulted in distincly different properties of the peripheral rings and face sides. Contructs cultured with mechanical loading maintained their cylindrical shape with flat and parallel top and bottom surfaces, and retained larger amounts of GAG. The modular bioreactor system with medium perfusion and mechanical loading can be utilized to define the conditions of cultivation for functional tissue engineering of cartilage.     

Epidermal growth factor dependence and TGF alpha autocrine growth regulation in primary rat tracheal epithelial cells.

We have examined dependence of primary rat tracheal epithelial (RTE) on exogenous epidermal growth factor (EGF) and determined whether a TGF alpha autocrine pathway is operating in these cells. Primary RTE cells plated in serum free media (SFM) without EGF and bovine pituitary factor (BPE) show little proliferation compared to cultures propagated in media containing EGF/BPE (CSFM). Removal of EGF/BPE shortly after plating, however, results in significant proliferation, although plateau cell densities are reduced and cell morphology is significantly altered compared to cells propagated in CSFM. Addition of EGF and/or BPE to cultures propagated in SFM minus EGF/BPE restores maximum cell density. The concentration of TGF alpha peptide in media conditioned by cells propagated without EGF/BPE is lower than the concentration in the media of CSFM cultures. TGF alpha mRNA and protein levels are also significantly lower in cells late in culture compared to logarithmically growing cells regardless of the presence or absence of EGF/BPE. The proliferation of primary RTE cells propagated without EGF/BPE is inhibited by neutralizing TGF alpha antiserum and by a tyrphostin compound that blocks TGF alpha/EGF receptor tyrosine kinase activity. These results indicate that primary RTE cells utilize TGF alpha as an autocrine growth factor and that the autocrine pathway is regulated as a function of growth state of the cells. However, this pathway does not provide growth autonomy to primary RTE cells, since cultures remain dependent on exogenous EGF/BPE for sustained proliferation.     

微重力条件下心肌细胞在聚羟基乙酸纤维支架上的三维固定化培养

以 1d龄Wistar乳鼠的心室肌组织为心肌细胞的来源 ,采用胰蛋白酶消化及细胞差速贴壁分离心肌细胞 ,以未经修饰和经鼠尾胶原溶液浸泡修饰的聚羟基乙酸 (polyglycolicacid ,PGA)纤维支架作为心肌细胞体外三维 (3D)固定化培养的支架 ,比较心肌细胞在静置培养体系及微重力培养体系下的生长、形态和收缩状况。心肌细胞在未经处理的PGA纤维支架 3D固定化培养时 ,心肌细胞在其上的分布不均匀 ,大部分心肌相互连接形成球状聚集体 ;PGA纤维支架经鼠尾胶原溶液浸泡处理后 ,心肌细胞在其上的分布较为均匀 ,细胞形态多呈梭形或不规则状 ,心肌细胞自律性搏动的幅度加大。在模拟微重力培养条件下 ,心肌细胞在经鼠尾胶原溶液浸泡修饰的PGA纤维支架上的分布更为均匀 ,心肌细胞形成具有自律性同步收缩特性、面积约为 15mm2 的类组织样 3D结构     

Use of soybean protein hydrolysates for promoting proliferation of human keratinocytes in serum-free medium

Human keratinocytes are generally cultured in media containing bovine pituitary extract (BPE), an animal product that can be a source of infectious contaminants. We investigated whether a safer plant product could replace BPE in the culture medium. Medium containing both BPE and soy protein hydrolysates (Bacto Soytone and Soy Hydrolysate) produced the largest number of viable cells, followed in descending order by medium supplemented only with BPE, only with the hydrolysates, and without supplementation (basal medium only). Soybean protein is thus an excellent source of nutrients for the growth of adherent keratinocytes, although they do not fully substitute for BPE.     

Enhanced cartilage tissue engineering by sequential exposure of chondrocytes to FGF-2 during 2D expansion and BMP-2 during 3D cultivation

Bovine calf articular chondrocytes, either primary or expanded in monolayers (2D) with or without 5 ng/ml fibroblast growth factor-2 (FGF-2), were cultured on three-dimensional (3D) biodegradable polyglycolic acid (PGA) scaffolds with or without 10 ng/ml bone morphogenetic protein-2 (BMP-2). Chondrocytes expanded without FGF-2 exhibited high intensity immunostaining for smooth muscle alpha-actin (SMA) and collagen type I and induced shrinkage of the PGA scaffold, thus resembling contractile fibroblasts. Chondrocytes expanded in the presence of FGF-2 and cultured 6 weeks on PGA scaffolds yielded engineered cartilage with 3.7-fold higher cell number, 4.2-fold higher wet weight, and 2.8-fold higher wet weight glycosaminoglycan (GAG) fraction than chondrocytes expanded without FGF-2. Chondrocytes expanded with FGF-2 and cultured on PGA scaffolds in the presence of BMP-2 for 6 weeks yielded engineered cartilage with similar cellularity and size, 1.5-fold higher wet weight GAG fraction, and more homogenous GAG distribution than the corresponding engineered cartilage cultured without BMP-2. The presence of BMP-2 during 3D culture had no apparent effect on primary chondrocytes or those expanded without FGF-2. In summary, the presence of FGF-2 during 2D expansion reduced chondrocyte expression of fibroblastic molecules and induced responsiveness to BMP-2 during 3D cultivation on PGA scaffolds.     

The kinetics of bovine growth hormone folding are consistent with a framework model

The framework model of protein folding requires the hydrogen-bonded secondary structure to be formed early in folding (i.e. the formation of secondary structure precedes the tertiary structure) (Kim, P. S., and Baldwin, R. L. (1982) Annu. Rev. Biochem. 51, 459-489). To test the framework model directly the kinetics of bovine growth hormone (bGH) folding were compared utilizing two methods of detection, one that measures the secondary structure (far ultraviolet circular dichroism) and another that measures the tertiary structure (near ultraviolet absorbance). The results demonstrate that, under identical folding conditions, the kinetics observed by far ultraviolet circular dichroism are faster than those observed by ultraviolet absorption. The faster kinetics observed by circular dichroism indicate the existence of a helix-containing intermediate which is consistent with the framework model. The effect of protein concentration and denaturant concentration on the kinetics of refolding were studied. The rate of refolding measured by absorbance and circular dichroism was dependent on protein concentration. The protein concentration dependence on refolding is due to the transient formation of an associated intermediate. The concentration dependence of folding is taken as evidence that folding is a sequential process with partially folded monomers responsible for the observed association effect. At dilute protein concentrations the refolding can be studied independent of the association phenomena. The growth hormones utilized in this study were derived from Escherichia coli through recombinant DNA technology and from bovine pituitaries. The pituitary-derived bGH has been shown to be heterogeneous at the NH2 terminus (Lorenson, M. F., and Ellis, S. (1975) Endocrinology 96, 833-838), whereas the recombinant DNA-derived bGH contains a single NH2 terminus. No differences in the folding kinetics between the recombinant DNA and pituitary derived-bGH were observed. It is concluded that the heterogeneity of the NH2 terminus of growth hormone obtained from bovine pituitaries does not affect the observed in vitro folding kinetics.     

Biomimetic nanofibrous scaffolds: preparation and characterization of PGA/chitin blend nanofibers

Electrospinning of poly(glycolic acid) (PGA)/chitin blend solutions in 1,1,1,3,3,3-hexafluoro-2-propanol was investigated to fabricate biodegradable and biomimetic nanostructured scaffolds for tissue engineering. The morphology of the electrospun PGA/chitin blend nanofibers was investigated with a field emission scanning electron microscope. The PGA/chitin blend fibers have average diameters of around 140 nm, and their diameters have a distribution in the range 50-350 nm. The miscibility of PGA/chitin blend fibers was examined by differential scanning calorimetry. The PGA and chitin were immiscible in the as-spun nanofibrous structure. An in vitro degradation study of PGA/chitin blend nanofibers was conducted in phosphate-buffered saline, pH 7.2. It was found that the hydrolytic cleavage of PGA in the blend nanofibers was accelerated by the coexistence of hydrophilic chitin. To assay the cytocompatability and cell behavior on the PGA/chitin blend nanofibrous scaffolds, cell attachment and spreading of normal human epidermal fibroblasts seeded on the scaffolds were studied. Our results indicate that the PGA/chitin blend nanofibrous matrix, particularly the one that contained 25% PGA and 75% chitin with bovine serum albumin coating, could be a good candidate for tissue engineering scaffolds, because it has an excellent cell attachment and spreading for normal human fibroblasts.     

Self-reporting Scaffolds for 3-Dimensional Cell Culture

Culturing cells in 3D on appropriate scaffolds is thought to better mimic the in vivo microenvironment and increase cell-cell interactions. The resulting 3D cellular construct can often be more relevant to studying the molecular events and cell-cell interactions than similar experiments studied in 2D. To create effective 3D cultures with high cell viability throughout the scaffold the culture conditions such as oxygen and pH need to be carefully controlled as gradients in analyte concentration can exist throughout the 3D construct. Here we describe the methods of preparing biocompatible pH responsive sol-gel nanosensors and their incorporation into poly(lactic-co-glycolic acid) (PLGA) electrospun scaffolds along with their subsequent preparation for the culture of mammalian cells. The pH responsive scaffolds can be used as tools to determine microenvironmental pH within a 3D cellular construct. Furthermore, we detail the delivery of pH responsive nanosensors to the intracellular environment of mammalian cells whose growth was supported by electrospun PLGA scaffolds. The cytoplasmic location of the pH responsive nanosensors can be utilized to monitor intracellular pH (pHi) during ongoing experimentation.     

Fluorescence assay of the specificity of human plasma and bovine liver phospholipid transfer proteins

The specificities of a human plasma and bovine liver phospholipid transfer protein were studied using a fluorescence assay based on the transfer of pyrenyl phospholipids. This method was used previously to determine the mechanism of spontaneous transfer of phospholipids between model lipoproteins (Massey, J.B., Gotto, A.M., Jr. and Pownall, H.J. (1982) Biochemistry 21, 3630-3636). The pyrenyl phospholipids varied in the headgroup moiety; pyrenyl phosphatidylcholines contained different fatty acyl chains in the sn-1 position. Model high-density lipoproteins (R-HDL) consisting of apolipoprotein A-I and 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) were used as donor and acceptor particles. As previously shown, the bovine liver protein mediated the transfer of only phosphatidylcholine. In contrast, the human plasma protein transferred all species studied which included a phosphatidylserine, phosphatidylcholine, phosphatidylglycerol, phosphatidylethanolamine, phosphatidic acid, sphingomyelin, galactosylcerebroside, and a diacylglycerol. The activity of these transfer proteins was only slightly affected by changes in the acyl chain composition of the transferring lipid. Pyrenyl and radioactive ([3H]POPC) phospholipids were transferred with equal rates by the human transfer protein, suggesting that this protein has similar binding characteristics for pyrenyl and natural phospholipids. Spontaneous phospholipid transfer occurs by the aqueous diffusion of monomeric lipid where the rate is highly dependent on fatty acyl chain composition. In this study, no correlation between the rate of spontaneous transfer and protein-mediated transfer was found. The apparent Km values for R-HDL and low-density lipoprotein (LDL), when used as acceptors, were similar when based on the number of acceptor particles. The apparent Vmax for the bovine liver protein was identical for R-HDL and LDL but for the plasma protein Vmax was slightly higher for R-HDL. These results suggest that, like the bovine liver protein, the plasma protein functions as a phospholipid-binding carrier that exchanges phospholipids between membrane surfaces. The assay of lipid transfer proteins by pyrenyl-labeled lipids is faster and easier to perform than other current methods, which require separation of donor and acceptor particles, and is suitable for studies on the function and mechanism of action of lipid transfer proteins.     

Bovine colostrum ultrafiltrate supplemented with adult bovine serum and transferrin: An effective fbs substitute for cultivation of vero and CHO-K1 cells

Summary A mixture containing an ultrafiltrate fraction (UF) of bovine colostrum (6.7%), adult bovine serum (BS) (1%), and human holo-transferrin (hTF) (5 mg/liter) was developed for cultivation of Chinese hamster ovary cells (CHO-K1) and African green monkey kidney cells (Vero). The growth-supporting activity of the mixture (UF/BS/hTF) was comparable to that of 1 to 10% fetal bovine serum (FBS) and considerably better than 1 to 2% BS. Cells could be directly seeded from FBS-supplemented medium to UF/BS/hTF-supplemented medium without any weaning period, even at initial plating density of 1700 cells/ml. Vero and CHO-K1 cells were cultivated in UF/BS/hTF-supplemented media for up to 43 days without any apparent reduction in growth. The UF/BS/hTF mixture could also be used as a freezing medium. Cells were passaged twice in the mixture, frozen, and stored at liquid N₂ for 11 wk. After thawing, the viability of Vero and CHO-K1 cells was reduced 13 and 7%, respectively, and both cell lines started to grow well. Additional hTF could be replaced with bovine holo-transferrin, although a high concentration (150 mg/liter) should be used for CHO-K1 cells. The results suggest that the UF/BS/hTF mixture provides a new economical alternative to FBS in cultivation of Vero and CHO-K1 cells in the presence of reduced protein amounts.     

Optimized bone regeneration based on sustained release from three-dimensional fibrous PLGA/HAp composite scaffolds loaded with BMP-2

Contemporary treatment of critical bone defect remains a significant challenge in the field of orthopedic surgery. Engineered biomaterials combined with growth factors have emerged as a new treatment alternative in bone repair and regeneration. Our approach is to encapsulate bone morphogenetic protein-2 (BMP-2) into a polymeric matrix in different ways and characterize their individual performance in a nude mouse model. The main objective of this study is to examine whether the PLGA/HAp composite fibrous scaffolds loaded with BMP-2 through electrospinning can improve bone regeneration. The hypothesis is that different loading methods of BMP-2 and different HAp contents in scaffolds can alternate the release profiles of BMP-2 in vivo, therefore modify the performance of scaffolds in bone regeneration. Firstly, mechanical strength of scaffolds and HAp nanoparticles distribution in scaffolds were investigated. Secondly, nude mice experiments extended to 6 weeks were carried out to test the in vivo performance of these scaffolds, in which measurements, like serum BMP-2 concentration, ALP activity, X-ray qualification, and H&E/IHC tissue staining were utilized to monitor the growth of new bone and the changes of the corresponding biochemical parameters. The results showed that the PLGA/HAp composite scaffolds developed in this study exhibited good morphology/mechanical strength and HAp nanoparticles were homogeneously dispersed inside PLGA matrix. Results from the animal experiments indicate that the bioactivity of BMP-2 released from the fibrous PLGA/HAp composite scaffolds is well maintained, which further improves the formation of new bone and the healing of segmental defects in vivo. It is concluded that BMP-2 loaded PLGA/HAp composite scaffolds are promising for bone healing.     

Controllable surface modification of poly(lactic-co-glycolic acid) (PLGA) by hydrolysis or aminolysis I: physical, chemical, and theoretical aspects

While biodegradable, biocompatible polyesters such as poly (lactic-co-glycolic acid) (PLGA) are popular materials for the manufacture of tissue engineering scaffolds, their surface properties are not particularly suitable for directed tissue growth. Although a number of approaches to chemically modify the PLGA surface have been reported, their applicability to soft tissue scaffolds, which combine large volumes, complex shapes, and extremely fine structures, is questionable. In this paper, we describe two wet-chemical methods, base hydrolysis and aminolysis, to introduce useful levels of carboxylic acid or primary and secondary amine groups, respectively, onto the surface of PLGA with minimal degradation. The effects of temperature, concentration, pH, and solvent type on the kinetics of these reactions are studied by following changes in the wettability of the PLGA using contact angle measurements. In addition, the treated surfaces are studied using X-ray photoelectron spectroscopy (XPS) to determine the effect on the surface chemical structure. Furthermore, we show using XPS analysis that these carboxyl and amine groups are readily activated to allow the covalent attachment of biological macromolecules.