Composition of major outer membrane proteins of Vibrio vulnificus isolates: effect of different growth media and iron deficiency

The outer membrane proteins of Vibrio vulnificus including isolates from humans, seawater and an asari clam were examined by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. A major outer membrane protein with an apparent molecular weight of 48,000 (48K protein) was common to all the strains grown in 3% NaCl-nutrient broth; however this 48K protein was not produced in any of the strains grown in chemically defined medium. Other major outer membrane proteins with molecular weights ranging from 33,000 to 40,000 varied in number, relative amount and molecular weight depending on the strain. One to three new outer membrane proteins with molecular weights ranging from 74,000 to 85,000 were produced in the cells grown in iron-deficient medium. The 48K protein and one or two major proteins with molecular weights ranging from 35,000 to 37,000 in the cells grown in 3% NaCl-nutrient broth were not solubilized by 2% SDS at 60 C for 30 min and were resistant to trypsin, indicating that they are porins. On the other hand, in cells grown in chemically defined medium, one or two major outer membrane proteins with molecular weights ranging from 33,000 to 40,000 might be porins.     

Encystment and alkylresorcinol production by<Emphasis Type="Italic"> Azotobacter vinelandii</Emphasis> strains impaired in poly-β-hydroxybutyrate synthesis

The lipids poly-beta-hydroxybutyrate (PHB) and alkylresorcinols are the major metabolic products of Azotobacter vinelandii cysts. Cysts are formed in less than 0.01% of late stationary phase cells grown on sucrose. Culturing vegetative cells in n-butanol or beta-hydroxybutyrate induces encystment. After induction of encystment, PHB rapidly accumulates in large granules. Then, the cells begin the synthesis of alkylresorcinols that replace the phospholipids in the membranes and are components of the exine, the outer layer of the cyst envelope. Vegetative cells do not synthesize alkylresorcinols. We report here the effect of mutations in the phbBAC operon, coding for the enzymes of the PHB biosynthetic pathway, on the synthesis of alkylresorcinols and cyst formation. The phb mutations did not impair the capacity to form mature cysts. However, the cysts formed by these strains posses a thicker exine layer and a higher content of alkylresorcinols than the cysts formed by the wild-type strain. A blockage of PHB synthesis caused by phb mutations resulted in the synthesis of alkylresorcinols and encystment even under non-inducing conditions. We propose that, as a consequence of the blockage in the PHB biosynthetic pathway, the acetyl-CoA and reducing power pools are increased causing the shift to lipid metabolism required for the synthesis of alkylresorcinols and cyst formation.     

Scanning electron microscopic studies on the external morphology of Azotobacter vinelandii during encystment and germination.

Aspects of the external morphology of Azotobacter vinelandii cells during encystment and germination processes were observed with scanning electron microscopy. Most of the vegetative cells have a smooth surface but some have warty surfaces. The intact cysts have wrinkled surfaces and occasional small heaves. Mucoid materials are present on the surface of the cysts. During the encystment process, an extensive peeling-off of coat materials was noted, then the excretion and aggregation of new capsular materials was immediately followed. The germination process was initiated by an expansion of the central body (the cell), then the emerging of this cell from the cyst coats was observed.     

Respiratory properties of cysts and vegetative cells of Azotobacter vinelandii

Abstract The respiratory activity of cysts of Azotobacter vinelandii has been compared with that of vegetative cells. Whole cysts had a much reduced respiratory activity which was less sensitive to KCN. Substrate oxidation rates by membrane preparations from cysts were reduced approximately 10-fold and sensitivity to KCN was decreased by a similar factor. Difference spectra of cyst membranes revealed changes in cytochrome content. Cytochrome oxidase d was apparently absent, cytochrome a ₁ levels were approximately halved whilst those of cytochrome oxidase o were almost doubled. Cytochromes of the b and c -type were present in similar amounts to those in vegetative cells.     

Derepression of the Azotobacter vinelandii siderophore system, using iron-containing minerals to limit iron repletion

Azotobacter vinelandii solubilized iron from certain minerals using only dihydroxybenzoic acid, which appeared to be produced constitutively. Solubilization of iron from other minerals required dihydroxybenzoic acid and the siderophore N,N'-bis-(2,3- dihydroxybenzoyl )-L-lysine ( azotochelin ) or these chelators plus the yellow-green fluorescent siderophore azotobactin . In addition to this sequential production of siderophores, cells also demonstrated partial to hyperproduction relative to the iron-limited control. The iron sources which caused partial derepression of the siderophores caused derepression of all the high-molecular-weight iron-repressible outer membrane proteins except a 77,000-molecular-weight protein, which appeared to be coordinated with azotobactin production. Increased siderophore production correlated with increased production of outer membrane proteins with molecular weights of 93,000, 85,000, and 77,000, but an 81,000-molecular-weight iron-repressible protein appeared at a constant level despite the degree of derepression. When iron was readily available, it appeared to complex with a 60,000-molecular-weight protein believed to form a surface layer on the A. vinelandii cell.     

Ultrastructure of Azotobacter vinelandii

Vegetative cells and cysts of Azotobacter vinelandii 12837 were prepared for electron microscopy by several methods assumed to preserve structural details destroyed by techniques previously reported in the literature. Examination of large numbers of cells and cysts by these methods revealed four structural details not reported previously: intine fibrils, intine vesicles, intine membrane, and microtubules. The intine fibrils form a network in the gel-like homogeneous matrix of the CC2 layer. Intine vesicles which seem to originate in the cell wall complex of the central body are seen in the intine and exine of cysts. Analogous structures are found on vegetative cells. The intine is divided into two chemically distinct areas by the two-layered intine membrane. Microtubules, previously reported only in vegetative cells, were found in cysts.     

Regular surface layer of Azotobacter vinelandii.

Washing Azotobacter vinelandii UW1 with Burk buffer or heating cells at 42 degrees C exposed a regular surface layer which was effectively visualized by freeze-etch electron microscopy. This layer was composed of tetragonally arranged subunits separated by a center-to-center spacing of approximately 10 nm. Cells washed with distilled water to remove an acidic major outer membrane protein with a molecular weight of 65,000 did not possess the regular surface layer. This protein, designated the S protein, specifically reattached to the surface of distilled-water-washed cells in the presence of the divalent calcium, magnesium, strontium, or beryllium cations. All of these cations except beryllium supported reassembly of the S protein into a regular tetragonal array. Although the surface localization of the S protein has been demonstrated, radioiodination of exposed envelope proteins in whole cells did not confirm this. The labeling behavior of the S protein could be explained on the basis of varying accessibilities of different tyrosine residues to iodination.     

Adenine nucleotide content and energy charge in dry cells and cysts of Azotobacter vinelandii

Abstract The levels of intracellular adenine nucleotides, energy charge, oxygen consumption and poly-β-hydroxybutyric acid stored, have been investigated in dry vegetative cells and cysts of Azotobacter vinelandii . The data show that under desiccation conditions the cysts retain viability at energy charge values of 0.20 and an ATP/ADP ratio of 0.24, whereas under the same desiccation conditions, vegetative cells die at energy charge values <0.5 and an ATP/ADP ratio of <0.6.     

Germination of Azotobacter vinelandii Cysts: Sequence of Macromolecular Synthesis and Nitrogen Fixation

Azotobacter vinelandii cysts undergo conversion to vegetative cells in Burk's nitrogen-free medium utilizing glucose, sucrose, or acetate. In 1% glucose, this overall process was complete in 8 hr and consisted of a germination and an outgrowth phase. Respiration, ribonucleic acid, and protein synthesis began soon after the addition of the germinant, and these processes proceeded at rates characteristic of the germination. The rates of respiration and synthesis increased sharply between 4 and 5 hr, the beginning of the outgrowth, at which time deoxyribonucleic acid synthesis and nitrogen fixation began. Respiration, macromolecular synthesis and nitrogen fixation continued at high rates until the emergence of vegetative cells from the cyst coats.     

Freeze-Etching of Azotobacter vinelandii: Examination of Wall, Exine, and Vesicles

The structure of the cell wall, the arrangement of the cyst exine, and the origin and distribution of intine vesicles in Azotobacter vinelandii ATCC 12837 were examined by freeze-etching and conventional electron microscopic techniques. In the vegetative organism the cell wall appears to have a woven texture which disappears during cyst formation. The exine is composed of two different types of material: the outer layer is a fibrous, amorphous layer, and the numerous inner layers form the basic hexagonal structures which unite to form the cyst coat. The presence of intine vesicles in the encysting organism was confirmed in frozen-etched cells. The appearance of frozen-etched cells and cysts and the distribution of capsular material indicate that extracellular polysaccharide is an important factor in cyst formation.     

Surface Structure of Azotobacter vinelandii Cysts as Revealed by Freeze-Cleaving

Micrographs of freeze-cleaved Azotobacter vinelandii cysts reveal that the surface is composed of several overlapping layers. This observation is consistent with the previously proposed structure of the outer cyst coat.     

Survival of Azotobacter in Dry Soil

Detection of viable Azotobacter in soils stored in the laboratory for more than 10 years suggests that these bacteria can remain dormant in nature for prolonged periods of time. Studies of dried cultures show that cysts of A. vinelandii 12837 remain viable for at least 10 years, whereas vegetative cells do not survive for even 1 year under the same conditions.     

Central body of the Azotobacter cyst

Parker, Laura T. (Louisiana State University, Baton Rouge), and M. D. Socolofsky. Central body of the Azotobacter cyst. J. Bacteriol. 91:297-303. 1966.-Sodium citrate was found to effect extensive rupture of cyst coats of Azotobacter vinelandii. By filtering a citrate-ruptured cyst suspension through a Millipore microfiber glass prefilter, a preparation of viable central bodies was obtained that contained less than 1% residual cysts and vegetative cells. Electron micrographs showed the central bodies to have a cell wall and cell membrane. Free central bodies germinated into typical vegetative cells. Central bodies exhibited approximately the same resistance to ultraviolet radiation, sonic treatment, and elevated temperatures as did vegetative cells; cysts were much more resistant. Manometric experiments indicated that central bodies and cysts have almost the same oxidative capabilities. Results of resistance studies indicated that the central body is a contracted vegetative cell encased in a protective coat. The cyst coat appears to account for the resistance of the cyst.     

Structure of the Azotobacter vinelandii surface layer.

Electron microscopy of the Azotobacter vinelandii tetragonal surface array, negatively stained with ammonium molybdate in the presence of 1 mM calcium chloride, showed an apparent repeat frequency of 12 to 13 nm. Image processing showed dominant tetrad units alternating with low-contrast cruciform structures formed at the junction of slender linkers extending from corner macromolecules of four adjoining dominant units. The actual unit cell showed p4 symmetry, and a = b = 18.4 nm. Distilled water extraction of the surface array released a multimeric form of the single 60,000 molecular-weight protein (S protein) which constitutes the surface layer. The molecular weight of the multimer was estimated at 255,000 by gel filtration, indicating a tetrameric structure of four identical subunits and suggesting that this multimer was the morphological subunit of the S layer. Tetrameric S protein exhibited low intrinsic stability once released from the outer membrane, dissociating into monomers when incubated in a variety of buffers including those which served as the base for defined media used to cultivate A. vinelandii. The tetramer could not be stabilized in these buffers at any temperature between 4 and 30 degrees C, but the addition of 2 to 5 mM Ca2+ or Mg2+ completely prevented its dissociation into monomers. Circular dichroism measurements indicated that the secondary structure of the tetramer was dominated by aperiodic and beta-sheet conformations, and the addition of Ca2+ did not produce any gross changes in this structure. Only the tetrameric form of S protein was able to reassemble in vitro in the presence of divalent cations onto the surface of cells stripped of their native S layer.     

Translocation of group 1 capsular polysaccharide to the surface of Escherichia coli requires a multimeric complex in the outer membrane

Surface expression of the group 1 K30 capsular polysaccharide of Escherichia coli strain E69 (O9a:K30) requires Wza(K30), a member of the outer membrane auxiliary (OMA) protein family. A mutation in wza(K30) severely restricts the formation of the K30 capsular structure on the cell surface, but does not interfere with the biosynthesis or polymerization of the K30 repeat unit. Here we show that Wza(K30) is a surface-exposed outer membrane lipoprotein. Wza(K30) multimers form ring-like structures in the outer membrane that are reminiscent of the secretins of type II and III protein translocation systems. We propose that Wza(K30) forms an outer membrane pore through which the K30-capsular antigen is translocated. This is the first evidence of a potential mechanism for translocation of high molecular weight polysaccharide across the outer membrane. The broad distribution of the OMA protein family suggests a similar process for polysaccharide export in diverse Gram-negative bacteria.     

Catabolism of the anion transport protein in human erythrocytes

We identified the catabolic products of protein 3 in human erythrocytes. Protein 3, the major protein of the erythrocyte membrane, functions in anion transport and reacts covalently with tritiated 4,4'-diisothiocyano-1,2-diphenylethane-2,2'-disulfonic acid ([3H]DIDS), a very selective inhibitor of anion transport. In this study, [3H]DIDS was used to label protein 3 in the membranes of normal cells and those from a donor heterozygous for a variant of protein 3, defined by its elongated amino-terminal end. Both types of cells contained [3H]DIDS-labeled peptides other than protein 3. A protein fragment of 60K molecular weight was found in normal cells, whereas both 60K and 63K fragments were identified in cells from the heterozygote. These peptides are identical with those generated by treatment of intact erythrocytes with Pronase or chymotrypsin. A polyclonal rabbit antibody specific for the purified 60K fragment of protein 3 was used to detect this protein and its products in the erythrocyte membrane. Autoradiographs of membrane peptides that were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, transferred to nitrocellulose, and allowed to react with the monospecific antibody showed, in addition to protein 3, a 60K fragment and fragments in the 40K region and in the 20-30K region. Cells containing the protein 3 variant yielded two fragments showing a 3K difference in molecular weight in all three regions, demonstrating that degradation of protein 3 is identical in normal erythrocytes and those heterozygous for the variant. This observation also confirms the common derivation of the fragments from protein 3.(ABSTRACT TRUNCATED AT 250 WORDS)     

Surface protein composition of Aeromonas hydrophila strains virulent for fish: identification of a surface array protein.

The surface protein composition of members of a serogroup of Aeromonas hydrophila which exhibit high virulence for fish was examined. Treatment of whole cells of representative strain A. hydrophila TF7 with 0.2 M glycine buffer (pH 4.0) resulted in the release of sheets of a tetragonal surface protein array. Sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis analysis showed that this sheet material was composed primarily of a protein of apparent molecular weight 52,000 (52K protein). A 52K protein was also the predominant protein in glycine extracts of other members of the high-virulence serogroup. Immunoblotting with antiserum raised against formalinized whole cells of A. hydrophila TF7 showed the 52K S-layer protein to be the major surface protein antigen, and impermeant Sulfo-NHS-Biotin cell surface labeling showed that the 52K S-layer protein was the only protein accessible to the Sulfo-NHS-Biotin label and effectively masked underlying outer membrane (OM) proteins. In its native surface conformation the 52K S-layer protein was only weakly reactive with a lactoperoxidase 125I surface iodination procedure. A UV-induced rough lipopolysaccharide (LPS) mutant of TF7 was found to produce an intact S layer, but a deep rough LPS mutant was unable to maintain an array on the cell surface and excreted the S-layer protein into the growth medium, indicating that a minimum LPS oligosaccharide size was required for A. hydrophila S-layer anchoring. The 52K S-layer protein exhibited hear-dependent SDS-solubilization behavior when associated with OM, but was fully solubilized at all temperatures after removal from the OM, indicating a strong interaction of the S layer with the underlying OM. The native S layer was permeable to 125I in the lactoperoxidase radiolabeling procedure, and two major OM proteins of molecular weights 30,000 and 48,000 were iodinated. The 48K species was a peptidoglycan-associated, transmembrane protein which exhibited heat-modifiable SDS solubilization behaviour characteristic of a porin protein. A 50K major peptidoglycan-associated OM protein which was not radiolabeled exhibited similar SDS heat modification characteristics and possibly represents a second porin protein.     

Lipid metabolism during encystment of Azotobacter vinelandii.

The formation of cysts by Azotobacter vinelandii involves the synthesis of lipids as major metabolic products. Cells which encyst at low levels in aging glucose cultures undergo the same pattern of lipid synthesis as cells which undergo reasonably synchronous encystment in beta-hydroxybutyrate or n-butanol. The accumulation of poly-beta-hydroxybutyrate (PHB) precedes the synthesis of 5-n-heneicosylresorcinol and 5-n-tricosylresorcinol (AR1), which is then followed in about 6 h by the synthesis of the 5-n-alkylresorcinol galactosides (AR2). In the mature cyst, PHB, AR1, and AR2 account for 8, 5.6, and 4.5%, respectively, of the dry weight. Phospholipid formation levels off 4 h postinduction, which coincides with the final cell division, but fatty acids synthesis continues at a very low level throughout encystment, suggesting some turnover of fatty acid. Distribution studies show that AR1 and AR2 are found in roughly equal amounts in the exine and central body of the cysts, with only trace amounts recovered from the intine. Studies of cysts labeled during encystment with [14C]beta-hydroxybutyrate or during vegetative growth with [14C]glucose suggest that the exine structure is synthesized during encystment, but that the intine is composed largely of vegetative cell components.     

Human fibroblast-conditioned medium contains a 100K dalton glucose-regulated cell surface protein

This report describes the identification and partial characterization of a 100K dalton “glucose-regulated” cell surface protein of human diploid fibroblasts (HDF). This protein is released into and can be recovered virtually intact from the surrounding culture medium. At the present level of analysis, the protein recovered from the culture medium (“conditioned medium”) is indistinguishable from the protein extracted directly from the cell surface by 1 M urea treatment. Both proteins have molecular weights of 100K daltons when analyzed by gel electrophoresis. The protein is readily labeled at the cell surface via lactoperoxidase-catalyzed iodination, and the label can be chased into the released form of this protein in conditioned medium. Antiserum raised against the medium form of the protein reacts with the surface form of the protein but does not react with fibronectin, the major cell surface protein of HDF. Conditioned medium from SV40-transformed human fibroblasts does not contain the 100K protein, but instead contains a component that has a slightly lower molecular weight (97K daltons). The lower molecular weight band does not iodinate at the cell surface and is apparently an underglycosylated form of the 100K protein. Its molecular weight is shifted back to 100K by growing transformed cells in medium containing excess glucose. After the shift, the component becomes accessible to the radioiodine label. We suggest that the 100K protein is a glucose-regulated protein (Shiu, Pouyssegur and Pastan, 1977; Pouyssegur and Yamada, 1978) that is released into the culture medium. An underglycosylated form of the same glycoprotein is released from transformed cells.     

Ultrastructural and physiological changes occurring upon germination and outgrowth of Azotobacter vinelandii cysts.

Dormant cysts of Azotobacter vinelandii germinated at 30 degrees C in Burk nitrogen-free media containing 1% glucose. Samples taken at intervals and examined by electron microscopy revealed that as germination progressed, vesicle-like and fibrillar structures became visible in the intine region. Lamellae associated with the cell membrane appeared in the central body at 6 h post-initiation of germination. Both electron micrographic and chemical analysis showed that the poly-beta-hydroxybutyrate content of cysts decreased significantly after 4 h of germination. Dormant cysts were resistant to sonic oscillation, but this property was lost during their conversion to metabolically active vegetative cells.