Ultrahigh (0.93 Å) resolution structure of manganese peroxidase from Phanerochaete chrysosporium: Implications for the catalytic mechanism

Manganese peroxidase (MnP) is an extracellular heme enzyme produced by the lignin-degrading white-rot fungus Phanerochaete chrysosporium. MnP catalyzes the peroxide-dependent oxidation of Mn^II to Mn^III. The Mn^III is released from the enzyme in complex with oxalate, enabling the oxalate-Mn^III complex to serve as a diffusible redox mediator capable of oxidizing lignin, especially under the mediation of unsaturated fatty acids. One heme propionate and the side chains of Glu35, Glu39 and Asp179 have been identified as Mn^II ligands in our previous crystal structures of native MnP. In our current work, new 0.93 Å and 1.05 Å crystal structures of MnP with and without bound Mn^II, respectively, have been solved. This represents only the sixth structure of a protein of this size at 0.93 Å resolution. In addition, this is the first structure of a heme peroxidase from a eukaryotic organism at sub-Ångstrom resolution. These new structures reveal an ordering/disordering of the C-terminal loop, which is likely required for Mn binding and release. In addition, the catalytic Arg42 residue at the active site, normally thought to function only in the peroxide activation process, also undergoes ordering/disordering that is coupled to a transient H-bond with the Mn ligand, Glu39. Finally, these high-resolution structures also reveal the exact H atoms in several parts of the structure that are relevant to the catalytic mechanism.     

Homology models of two isozymes of manganese peroxidase: Prediction of a Mn(II) binding site

The three-dimensional structures of two isozymes of manganese peroxidase (MnP) have been predicted from homology modeling using lignin peroxidase as a template. Although highly homologous, MnP differs from LiP by the requirement of Mn(II) as an intermediate in its oxidation of substrates. The Mn(II) site is absent in LiP and unique to the MnP family of peroxidases. The model structures were used to identify the unique Mn(II) binding sites, to determine to what extent they were conserved in the two isozymes, and to provide insight into why this site is absent in LiP. For each isozyme of MnP, three candidate Mn(II) binding sites were identified. Energy optimizations of the three possible Mn(II) enzyme complexes allowed the selection of the most favorable Mn(II) binding site as one with the most anionic oxygen moieties best configured to act as ligands for the Mn(II). At the preferred site, the Mn(II) is coordinated to the carboxyl oxygens of Glu-35, Glu-39, and Asp-179, and a propionate group of the heme. The predicted Mn(II) binding site is conserved in both isozymes. Comparison between the residues at this site in MnP and the corresponding residues in LiP shows that two of the three anionic residues in MnP are replaced by neutral residues in LiP, explaining why LiP does not bind Mn(II). © 1994 Wiley-Liss, Inc.     

Proton NMR investigation of the heme active site structure of an engineered cytochrome c peroxidase that mimics manganese peroxidase.

The heme active site structure of an engineered cytochrome c peroxidase [MnCcP; see Yeung, B. K., et al. (1997) Chem. Biol. 4, 215-221] that closely mimics manganese peroxidase (MnP) has been characterized by both one- and two-dimensional NMR spectroscopy. All hyperfine-shifted resonances from the heme pocket as well as resonances from catalytically relevant amino acid residues in the congested diamagnetic envelope have been assigned. From the NMR spectral assignment and the line broadening pattern of specific protons in NOESY spectra of MnCcP, the location of the engineered Mn(II) center is firmly identified. Furthermore, we found that the creation of the Mn(II)-binding site in CcP resulted in no detectable structural changes on the distal heme pocket of the protein. However, notable structural changes are observed at the proximal side of the heme cavity. Both CepsilonH shift of the proximal histidine and (15)N shift of the bound C(15)N(-) suggest a weaker heme Fe(III)-N(His) bond in MnCcP compared to WtCcP. Our results indicate that the engineered Mn(II)-binding site in CcP resulted in not only a similar Mn(II)-binding affinity and improved MnP activity, but also weakened the Fe(III)-N(His) bond strength of the template protein CcP so that its bond strength is similar to that of the target protein MnP. The results presented here help elucidate the impact of designing a metal-binding site on both the local and global structure of the enzyme, and provide a structural basis for engineering the next generation of MnCcP that mimics MnP more closely.     

The role of Glu39 in MnII binding and oxidation by manganese peroxidase from Phanerochaete chrysoporium

Manganese peroxidase (MnP) is a heme-containing enzyme produced by white-rot fungi and is part of the extracellular lignin degrading system in these organisms. MnP is unique among Mn binding enzymes in its ability to bind and oxidize Mn(II) and efficiently release Mn(III). Initial site-directed mutagenesis studies identified the residues E35, E39, and D179 as the Mn binding ligands. However, an E39D variant was recently reported to display wild-type Mn binding and rate of oxidation, calling into question the role of E39 as an Mn ligand. To investigate this hypothesis, we performed computer modeling studies which indicated metal-ligand bond distances in the E39D variant and in an E35D--E39D--D179E triple variant which might allow Mn binding and oxidation. To test the model, we reconstructed the E35D and E39D variants used in the previous study, as well as an E39A single variant and the E35D--E39D--D179E triple variant of MnP isozyme 1 from Phanerochaete chrysosporium. We find that all of the variant proteins are impaired for Mn(II) binding (K(m) increases 20--30-fold) and Mn(II) oxidation (k(cat) decreases 50--400-fold) in both the steady state and the transient state. In particular, mutation of the E39 residue in MnP decreases both Mn binding and oxidation. The catalytic efficiency of the E39A variants decreased approximately 10(4)-fold, while that of the E39D variant decreased approximately 10(3)-fold. Contrary to initial modeling results, the triple variant performed only as well as any of the single Mn ligand variants. Interestingly, the catalytic efficiency of the triple variant decreased only 10(4)-fold, which is approximately 10(2)-fold better than that reported for the E35Q--D179N double variant. These combined studies indicate that precise geometry of the Mn ligands within the Mn binding site of MnP is essential for the efficient binding, oxidation, and release of Mn by this enzyme. The results clearly indicate that E39 is a Mn ligand and that mutation of this ligand decreases both Mn binding and the rate of Mn oxidation.     

Preparation and catalytic performance of surfactant-manganese peroxidase-Mn(II) ternary complex in organic media

A novel preparation method for surfactant-MnP-Mn(II) ternary complex utilizing water-in-oil emulsions has been developed. The surfactant-MnP complex was spectroscopically characterized, strongly suggesting that the heme environment of the surfactant-MnP complex in benzene is identical to that of native MnP in the aqueous buffer. o-Phenylenediamine oxidation catalyzed by the surfactant-MnP-Mn(II) ternary complex was performed in benzene. The ternary complex efficiently catalyzed the oxidation, and the complex was catalytically stable. Kinetic experiments revealed that the reaction mechanism was as follows: MnP is oxidized by H(2)O(2) and the oxidized intermediate catalyzes the oxidation of Mn(II) to Mn(III) and the latter, after complexed with malonate, readily oxidizes o-PDA inside the complex. Thus, the organic substrate o-PDA, but not Mn(III), shuttled between the surfactant-MnP-Mn(II) ternary complex and organic solvent.     

Mn(II) oxidation is the principal function of the extracellular Mn-peroxidase from Phanerochaete chrysosporium

The manganese peroxidase (MnP), from the lignin-degrading fungus Phanerochaete chrysosporium, an H2O2-dependent heme enzyme, oxidizes a variety of organic compounds but only in the presence of Mn(II). The homogeneous enzyme rapidly oxidizes Mn(II) to Mn(III) with a pH optimum of 5.0; the latter was detected by the characteristic spectrum of its lactate complex. In the presence of H2O2 the enzyme oxidizes Mn(II) significantly faster than it oxidizes all other substrates. Addition of 1 M equivalent of H2O2 to the native enzyme in 20 mM Na-succinate, pH 4.5, yields MnP compound II, characterized by a Soret maximum at 416 nm. Subsequent addition of 1 M equivalent of Mn(II) to the compound II form of the enzyme results in its rapid reduction to the native Fe3+ species. Mn(III)-lactate oxidizes all of the compounds which are oxidized by the enzymatic system. The relative rates of oxidation of various substrates by the enzymatic and chemical systems are similar. In addition, when separated from the polymeric dye Poly B by a semipermeable membrane, the enzyme in the presence of Mn(II)-lactate and H2O2 oxidizes the substrate. All of these results indicate that the enzyme oxidizes Mn(II) to Mn(III) and that the Mn(III) complexed to lactate or other alpha-hydroxy acids acts as an obligatory oxidation intermediate in the oxidation of various dyes and lignin model compounds. In the absence of exogenous H2O2, the Mn-peroxidase oxidized NADH to NAD+, generating H2O2 in the process. The H2O2 generated by the oxidation of NADH could be utilized by the enzyme to oxidize a variety of other substrates.     

pH Dependence of the Efficiency of Binding of Iron Cations to the Donor Side of Photosystem II

Light-induced interaction of Fe(II) cations with the donor side of Mn-depleted photosystem II (PS II(–Mn)) results in the binding of iron cations and blocking of the high-affinity (HA_Z) Mn-binding site. The pH dependence of the blocking was measured using the diphenylcarbazide/2,6-dichlorophenolindophenol test. The curve of the pH dependence is bell-shaped with pK ₁ = 5.8 and pK ₂ = 8.0. The pH dependence of the O₂-evolution mediated by PS II membranes is also bellshaped (pK ₂ = 7.6). The pH dependence of the process of electron donation from exogenous donors in PS II(–Mn) was studied to determine the location of the alkaline pH sensitive site of the electron transport chain. The data of the study showed that the decrease in the iron cation binding efficiency at pH > 7.0 during blocking was determined by the donor side of the PS II(–Mn). Mössbauer spectroscopy revealed that incubation of PS II(–Mn) membranes in a buffer solution containing ⁵⁷Fe(II) + ⁵⁷Fe(III) was accompanied by binding only Fe(III) cations. The pH dependence of the nonspecific Fe(III) cation binding is also described by the same bell-shaped curve with pK ₂ = 8.1. The treatment of the PS II(–Mn) membranes with the histidine modifier diethylpyrocarbonate resulted in an increase in the iron binding strength at alkaline pH. It is suggested that blocking efficiency at alkaline pH is determined by competition between OH^– and histidine ligand for Fe(III). Because the high-affinity Mn-binding site contains no histidine residue, this fact can be regarded as evidence that histidine is located at another (other than high-affinity) Fe(III) binding site. In other words, this means that the blockage of the high-affinity Mn-binding site is determined by at least two iron cations. We assume that inactivation of oxygen-evolving complex and inhibition of photoactivation in the alkaline pH region are also determined by competition between OH^– and a histidine residue involved in coordination of manganese cation outside the high-affinity site.     

Characterization of reactions catalyzed by manganese peroxidase from Phanerochaete chrysosporium

Manganese peroxidase (MnP) is one of two extracellular peroxidases believed to be involved in lignin biodegradation by the white-rot basidiomycete Phanerochaete chrysosporium. The enzyme oxidizes Mn(II) to Mn(III), which accumulates in the presence of Mn(III) stabilizing ligands. The Mn(III) complex in turn can oxidize a variety of organic substrates. The stoichiometry of Mn(III) complex formed per hydrogen peroxide consumed approaches 2:1 as enzyme concentration increases at a fixed concentration of peroxide or as peroxide concentration decreases at a fixed enzyme concentration. Reduced stoichiometry below 2:1 is shown to be due to Mn(III) complex decomposition by hydrogen peroxide. Reaction of Mn(III) with peroxide is catalyzed by Cu(II), which explains an apparent inhibition of MnP by Cu(II). The net decomposition of hydrogen peroxide to form molecular oxygen also appears to be the only observable reaction in buffers that do not serve as Mn(III) stabilizing ligands. The nonproductive decomposition of both Mn(III) and peroxide is an important finding with implications for proposed in vitro uses of the enzyme and for its role in lignin degradation. Steady-state kinetics of Mn(III) tartrate and Mn(III) malate formation by the enzyme are also described in this paper, with results largely corroborating earlier findings by others. Based on a comparison of pH effects on the kinetics of enzymatic Mn(III) tartrate and Mn(III) malate formation, it appears that pH effects are not due to ionizations of the Mn(III) complexing ligand.     

Purification and characterization of Mn-peroxidase from Musa paradisiaca (banana) stem juice

Mn-peroxidase (MnP), a biotechnologically important enzyme was purified for the first time from a plant source Musa paradisiaca (banana) stem, which is an agro-waste easily available after harvest of banana fruits. MnP was earlier purified only from the fungal sources. The enzyme was purified from stem juice by ultrafiltration and anion-exchange column chromatography on diethylamino ethylcellulose with 8-fold purification and purification yield of 65%. The enzyme gave a single protein band in SDS-PAGE corresponding to molecular mass 43 kDa. The Native-PAGE of the enzyme also gave a single protein band, confirming the purity of the enzyme. The UV/VIS spectrum of the purified enzyme differed from the other heme peroxidases, as the Soret band was shifted towards lower wavelength and the enzyme had an intense absorption band around 250 nm. The K(m) values using MnSO4 and H2O2 as the substrates of the purified enzyme were 21.0 and 9.5 microM, respectively. The calculated k(cat) value of the purified enzyme using Mn(II) as the substrate in 50 mM lactate buffer (pH 4.5) at 25 degrees C was 6.7s(-1), giving a k(cat)/K(m) value of 0.32 microM(-1)s(-1). The k(cat) value for the MnP-catalyzed reaction was found to be dependent of the Mn(III) chelator molecules malonate, lactate and oxalate, indicating that the enzyme oxidized chelated Mn(II) to Mn(III). The pH and temperature optima of the enzyme were 4.5 and 25 degrees C, respectively. The enzyme in combination with H2O2 liberated bromine and iodine in presence of KBr and KI respectively. All these enzymatic characteristics were similar to those of fungal MnP. The enzyme has the potential as a green brominating and iodinating agent in combination with KBr/KI and H2O2.     

Engineering of a manganese-binding site in lignin peroxidase isozyme H8 from Phanerochaete chrysosporium

A Mn(2+)-binding site was created in the recombinant lignin peroxidase isozyme H8 from Phanerochaete chrysosporium. In fungal Mn peroxidase, the Mn-binding site is composed of Glu35, Glu39, and Asp179. We generated a similar site in lignin peroxidase by generating an anionic binding site. We generated three mutations: Asn182Asp, Asp183Lys, and Ala36Glu. Its activity, veratryl alcohol, and Mn(2+) oxidation were compared to those of native recombinant enzyme and to fungal Mn peroxidase isozyme H4, respectively. The mutated enzyme was able to oxidize Mn(2+) and still retain its ability to oxidize veratryl alcohol. Steady-state results indicate that the enzyme's ability to oxidize veratryl alcohol was lowered slightly. The K(m) for Mn(2+) was determined to be 1.57 mM and the k(cat) = 5.45 s(-1). These results indicate that the mutated lignin peroxidase is less effective in Mn(2+) oxidation that the wild type fungal enzyme. The pH optima of veratryl alcohol and Mn oxidation were altered by the mutation. They are one unit of pH value higher than those of recombinant H8 and wild type fungal Mn peroxidase isozyme H4.     

Metal binding to Saccharomyces cerevisiae ferrochelatase

Ferrochelatase is the terminal enzyme in the heme biosynthetic pathway. It catalyzes the insertion of ferrous iron into protoporphyrin IX to produce protoheme IX. The crystal structures of ferrochelatase from Saccharomyces cerevisiae in free form, in complex with Co(II), a substrate metal ion, and in complex with two inhibitors, Cd(II) and Hg(I), are presented in this work. The enzyme is a homodimer, with clear asymmetry between the monomers with regard to the porphyrin binding cleft and the mode of metal binding. The Co(II) and Cd(II) complexes reveal the metal binding site which consists of the invariant amino acids H235, E314, and S275 and solvent molecules. The shortest distance to the metal reveals that amino acid H235 is the primary metal binding residue. A second site with bound Cd(II) was found close to the surface of the molecule, approximately 14 A from H235, with E97, H317, and E326 participating in metal coordination. It is suggested that this site corresponds to the magnesium binding site in Bacillus subtilis ferrochelatase. The latter site is also located at the surface of the molecule and thought to be involved in initial metal binding and regulation.     

Burst kinetics and redox transformations of the active site manganese ion in oxalate oxidase: implications for the catalytic mechanism

Oxalate oxidase (EC 1.2.3.4) catalyzes the oxidative cleavage of oxalate to carbon dioxide and hydrogen peroxide. In this study, unusual nonstoichiometric burst kinetics of the steady state reaction were observed and analyzed in detail, revealing that a reversible inactivation process occurs during turnover, associated with a slow isomerization of the substrate complex. We have investigated the underlying molecular mechanism of this kinetic behavior by preparing recombinant barley oxalate oxidase in three distinct oxidation states (Mn(II), Mn(III), and Mn(IV)) and producing a nonglycosylated variant for detailed biochemical and spectroscopic characterization. Surprisingly, the fully reduced Mn(II) form, which represents the majority of the as-isolated native enzyme, lacks oxalate oxidase activity, but the activity is restored by oxidation of the metal center to either Mn(III) or Mn(IV) forms. All three oxidation states appear to interconvert under turnover conditions, and the steady state activity of the enzyme is determined by a balance between activation and inactivation processes. In O(2)-saturated buffer, a turnover-based redox modification of the enzyme forms a novel superoxidized mononuclear Mn(IV) biological complex. An oxalate activation role for the catalytic metal ion is proposed based on these results.     

Characterization of recombinant barley oxalate oxidase expressed by Pichia pastoris

Oxalate oxidase catalyzes the oxidation of oxalate to carbon dioxide and hydrogen peroxide, making it useful for clinical analysis of oxalate in biological fluids. An artificial gene for barley oxalate oxidase has been used to produce functional recombinant enzyme in a Pichia pastoris heterologous expression system, yielding 250 mg of purified oxalate oxidase from 5 L of fermentation medium. The recombinant oxalate oxidase was expressed as a soluble, hexameric 140 kDa glycoprotein containing 0.2 g-atom Mn/monomer with a specific activity of 10 U/mg, similar to the properties reported for enzyme isolated from barley. No superoxide dismutase activity was detected in the recombinant oxalate oxidase. EPR spectra indicate that the majority of the manganese in the protein is present as Mn(II), and are consistent with the six-coordinate metal center reported in the recent X-ray crystal structure for barley oxalate oxidase. The EPR spectra change when bulky anions such as iodide bind, indicating conversion to a five-coordinate complex. Addition of oxalate perturbs the EPR spectrum of the Mn(II) sites, providing the first characterization of the substrate complex. The optical absorption spectrum of the concentrated protein contains features associated with a minor six-coordinate Mn(III) species, which disappears on addition of oxalate. EPR spin-trapping experiments indicate that carboxylate free radicals (CO2*-) are transiently produced by the enzyme in the presence of oxalate, most likely during reduction of the Mn(III) sites. These features are incorporated into a turnover mechanism for oxalate oxidase.     

Kinetic and thermodynamic characterization of the functional properties of a hybrid versatile peroxidase using isothermal titration calorimetry: Insight into manganese peroxidase activation and lignin peroxidase inhibition

Isothermal titration calorimetry (ITC) was developed for measuring lignin peroxidase (LiP) and manganese peroxidase (MnP) activities of versatile peroxidase (VP) from Bjerkandera adusta. Developing an ITC approach provided an alternative to colorimetric methods that enabled reaction kinetics to be accurately determined. Although VP from Bjerkandera adjusta is a hybrid enzyme, specific conditions of [Mn+2] and pH were defined that limited activity to either LiP or MnP activities, or enabled both to be active simultaneously. MnP activity was found to be more efficient than LiP activity, with activity increasing with increasing concentrations of Mn+2. These properties of MnP were explained by a second metal binding site involved in homotropic substrate (Mn+2) activation. The activation of MnP was also accompanied by a decrease in both activation energy and substrate (Mn) affinity, reflecting a flexible enzyme structure. In contrast to MnP activity, LiP activity was inhibited by high dye (substrate) concentrations arising from uncompetitive substrate inhibition caused by substrate binding to a site distinct from the catalytic site. Our study provides a new level of understanding about the mechanism of substrate regulation of catalysis in VP from B. adjusta, providing insight into a class of enzyme, hybrid class II peroxidases, for which little experimental data is available.     

Implication of manganese (III), oxalate, and oxygen in the degradation of nitroaromatic compounds by manganese peroxidase (MnP)

The fungal ligninolytic enzyme manganese peroxidase (MnP) is known to function by oxidizing Mn(II) to Mn(III), a powerful oxidant. In this work, an abiotic system consisting of Mn(III) in oxalate buffer under aerobic conditions (Mn(III)/oxalate/O2 system) was shown to be capable of extensively transforming 2-amino-4,6-dinitrotoluene (2A46DNT)--one of the main reduction products of 2,4,6-trinitrotoluene (TNT). No significant transformation occurred in the presence of other organic acids or under anaerobic conditions. The Mn(III)/oxalate/O2 system was also able to transform other nitroaromatic compounds such as 2-nitrotoluene, 4-nitrotoluene, 2,4-dinitrotoluene, TNT - the latter to a lesser extent -, and their reduction derivatives. The Mn(III)/oxalate/O2 system mineralized 14C-U-ring labeled 2A46DNT slightly, while no significant mineralization of 14C-U-ring labeled TNT was observed. Unidentified 14C-transformation products were highly polar. Electron spin resonance experiments performed on the Mn(III)/oxalate/O2 system revealed the generation of formyl free radicals (*COO-). The oxygen requirement for the transformation of nitroaromatic compounds suggests the involvement of superoxide free radicals (O2-*). produced through autoxidation of *COO- by molecular oxygen. The implication of such a Mn(III)/oxalate/O2 system in the MnP-catalyzed degradation of nitroaromatic pollutants by white-rot fungi is further discussed.     

Arginine 177 is involved in Mn(II) binding by manganese peroxidase.

Site-directed mutations R177A and R177K in the gene encoding manganese peroxidase isozyme 1 (mnp1) from Phanerochaete chrysosporium were generated. The mutant enzymes were expressed in P. chrysosporium during primary metabolic growth under the control of the glyceraldehyde-3-phosphate dehydrogenase gene promoter, purified to homogeneity, and characterized by spectroscopic and kinetic methods. The UV-vis spectra of the ferric and oxidized states and resonance Raman spectra of the ferric state were similar to those of the wild-type enzyme, indicating that the heme environment was not significantly affected by the mutations at Arg177. Apparent K(m) values for Mn(II) were approximately 20-fold greater for the R177A and R177K MnPs than for wild-type MnP. However, the apparent K(m) values for the substrates, H(2)O(2) and ferrocyanide, and the k(cat) values for Mn(II) and ferrocyanide oxidation were similar to those of the wild-type enzyme. The second-order rate constants for compound I (MnPI) reduction of the mutant MnPs by Mn(II) were approximately 10-fold lower than for wild-type MnP. In addition, the K(D) values calculated from the first-order plots of MnP compound II (MnPII) reduction by Mn(II) for the mutant enzymes were approximately 22-fold greater than for wild-type MnP. In contrast, the first-order rate constants for MnPII reduction by Mn(II) were similar for the mutant and wild-type MnPs. Furthermore, second-order rate constants for the wild-type and mutant enzymes for MnPI formation, for MnPI reduction by bromide, and for MnPI and MnPII reduction by ferrocyanide were not significantly changed. These results indicate that both the R177A and R177K mutations specifically affect the binding of Mn, whereas the rate of electron transfer from Mn(II) to the oxidized heme apparently is not affected.     

Metal-directed affinity labeling of zinc(II), cobalt(II) and cadmium(II) horse liver alcohol dehydrogenases

The active site metal in horse liver alcohol dehydrogenase has been studied by metal-directed affinity labeling of the native zinc(II) enzyme and that substituted with cobalt(II) or cadmium(II). Reversible binding of bromoimidazolyl propionic acid to the cobalt enzyme blueshifts the visible absorption band originating from the catalytic cobalt atom at 655 to 630 nm. Binding of imidazole to the cobalt(II) enzyme redshifts the 655 nm band to 667 nm. Addition of bromoimidazolyl propionic acid blueshifts this 667 nm band back to 630 nm. This proves direct binding of the label to the active site metal in competition with imidazole. The affinity of the label for the reversible binding site in the three enzymes follows the order Zn ? Cd ? Co. After reversible complex formation, bromoimidazolyl propionic acid alkylates cysteine-46, one of the protein ligands to the active site metal. The nucleophilic reactivity of this metal-mercaptide bond in each reversible complex follows the order Co ? Zn ? Cd.     

The carboxyl modifier 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide (EDC) inhibits half of the high-affinity Mn-binding site in photosystem II membrane fragments

The diphenylcarbazide(DPC)/Mn2+ assay [Hsu, B.-D., Lee, J.-Y., & Pan, R.-L. (1987) Biochim. Biophys. Acta 890, 89-96] was used to assess the amount of the high-affinity Mn-binding site in manganese-depleted photosystem II (PS II) membrane fragments from spinach and Scenedesmus obliquus. The assay mechanism at high DPC concentration was shown to involve noncompetitive inhibition of only half of the control level of DPC donation to PS II by micromolar concentrations of Mn at pH 6.5 (i.e., one of two DPC donation sites is inhibited). At low DPC concentration both DPC and Mn2+ donate to PS II additively. Treatment with the carboxyl amino acid modifier 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide (EDC) inhibited half of the high-affinity Mn-binding site in spinach and Scenedesmus WT PS II membranes and all of the available site in Scenedesmus LF-1 mutant PS II membranes. A similar EDC concentration dependence was observed in all cases. Addition of 2 mM MnCl2 to the 10 mM EDC modification buffer provided complete protection for the Mn-binding site from modification. This protection was specific for Mn2+; six other divalent cations were ineffective. We conclude that EDC modifies that half of the high-affinity Mn-binding site that is insensitive to the histidine modifier diethyl pyrocarbonate (DEPC) [Seibert, M., Tamura, N., & Inoue, Y. (1989) Biochim. Biophys. Acta 974, 185-191] and directly affects ligands that bind Mn. The effects of EDC and DEPC that influence the high-affinity site are mutually exclusive and are specific to the lumenal side of the PS II membrane. Removal of the two more loosely bound of the four functional Mn from PS II membranes uncovers that part of the high-affinity site associated with carboxyl but not histidyl residues. We suggest that carboxyl residues on reaction center proteins are associated with half of the high-affinity Mn-binding site in PS II and are involved along with histidine residues in binding Mn functional in the O2-evolving process.     

Magnetic resonance and kinetic studies of pyruvate, phosphate dikinase. Interaction of oxalate with the phosphorylated form of the enzyme.

Pyruvate, orthophosphate dikinase (EC 2.7.9.1) carries out its catalytic function in three successive partial reactions, the final step being the reaction of pyruvate with a stable phosphoenzyme intermediate to give phosphoenolpyruvate and free enzyme (Evans, H.J., and Wood, H. G. (1968), Proc. Natl. Acad. Sci. U.S.A. 61, 1448). Interactions of oxalate, a structural analog of enolpyruvate, with the phosphorylated form of the enzyme have been investigated by kinetic inhibition measurements and by magnetic resonance studies of manganous ion complexes with the enzyme. Oxalate inhibits the reaction catalyzed by pyruvate, phosphate dikinase, and the inhibition is linearly competitive with respect to pyruvate. The inhibitor constant for oxalate of 25 mu-M is fourfold lower than the Michaelis constant for pyruvate. The enhancement in the longitudinal relaxation rate of water protons (PRR) which occurs upon binding of Mn(II) to the enzyme has been used to monitor binding of oxalate to Mn(II)-enzyme complexes. PRR titrations indicate that the dissociation constant of oxalate from the Mn(II) complex of the free form of the enzyme is an order of magnitude weaker than the kinetically determined Ki. On the other hand, titrations of solutions which contain the phosphorylated form of the enzyme reveal a much stronger binding of oxalate. Moreover, the strength of oxalate binding to the phosphorylated enzyme is a function both of the species and of the concentration of monovalent cations in the solution. In the presence of Tl+, which has the most favorable activator constant for the final partial reaction, the dissociation constant for oxalate from its complex with the phosphorylated enzyme is less than 1 mu-M. Electron paramagnetic resonance (EPR) spectra for the enzyme-bound Mn(II) are sensitive to structural perturbations which occur upon binding of substrates or of oxalate to the enzyme. The EPR spectrum for the Mn(II)-phosphoenzyme-oxalate species is distinguished from spectra for other complexes of the enzyme by unusually narrow line widths and consequent resolution of fine structure from electronic quadrupole splitting. The narrow lines in the EPR spectrum are indicative of a rigid, pseudocrystalline environment for the bound Mn(II). The magnitude and frequency dependence of the PRR for the Mn(II)-phosphoenzyme-oxalate complex indicate that if any water molecules are bound to the Mn(II), their exchange with the bulk water is severely retarded. The kinetic and magnetic resonance studies support the hypothesis that oxalate mimics the reactive intermediate, enolpyruvate, in a complex with the phosphorylated enzyme which may resemble the structure of the transition state of the final partial reaction.     

Structure of the cytochrome b6f complex: quinone analogue inhibitors as ligands of heme cn

A native structure of the cytochrome b(6)f complex with improved resolution was obtained from crystals of the complex grown in the presence of divalent cadmium. Two Cd(2+) binding sites with different occupancy were determined: (i) a higher affinity site, Cd1, which bridges His143 of cytochrome f and the acidic residue, Glu75, of cyt b(6); in addition, Cd1 is coordinated by 1-2 H(2)O or 1-2 Cl(-); (ii) a second site, Cd2, of lower affinity for which three identified ligands are Asp58 (subunit IV), Glu3 (PetG subunit) and Glu4 (PetM subunit). Binding sites of quinone analogue inhibitors were sought to map the pathway of transfer of the lipophilic quinone across the b(6)f complex and to define the function of the novel heme c(n). Two sites were found for the chromone ring of the tridecyl-stigmatellin (TDS) quinone analogue inhibitor, one near the p-side [2Fe-2S] cluster. A second TDS site was found on the n-side of the complex facing the quinone exchange cavity as an axial ligand of heme c(n). A similar binding site proximal to heme c(n) was found for the n-side inhibitor, NQNO. Binding of these inhibitors required their addition to the complex before lipid used to facilitate crystallization. The similar binding of NQNO and TDS as axial ligands to heme c(n) implies that this heme utilizes plastoquinone as a natural ligand, thus defining an electron transfer complex consisting of hemes b(n), c(n), and PQ, and the pathway of n-side reduction of the PQ pool. The NQNO binding site explains several effects associated with its inhibitory action: the negative shift in heme c(n) midpoint potential, the increased amplitude of light-induced heme b(n) reduction, and an altered EPR spectrum attributed to interaction between hemes c(n) and b(n). A decreased extent of heme c(n) reduction by reduced ferredoxin in the presence of NQNO allows observation of the heme c(n) Soret band in a chemical difference spectrum.