Collagenolytic serine-carboxyl proteinase from Alicyclobacillus sendaiensis strain NTAP-1: purification,characterization, gene cloning,and heterologous expression

Enzymatic degradation of collagen produces peptides, the collagen peptides, which show a variety of bioactivities of industrial interest. Alicyclobacillus sendaiensis strain NTAP-1, a slightly thermophilic, acidophilic bacterium, extracellularly produces a novel thermostable collagenolytic activity, which exhibits its optimum at the acidic region (pH 3.9) and is potentially applicable to the efficient production of such peptides. Here, we describe the purification to homogeneity, characterization, gene cloning, and heterologous expression of this enzyme, which we call ScpA. Purified ScpA is a monomeric, pepstatin-insensitive carboxyl proteinase with a molecular mass of 37 kDa which exhibited the highest reactivity toward collagen (type I, from a bovine Achilles tendon) among the macromolecular substrates examined. On the basis of the sequences of the peptides obtained by digestion of collagen with ScpA, the following synthetic peptides were designed as substrates for ScpA and kinetically analyzed: Phe-Gly-Pro-Ala*Gly-Pro-Ile-Gly (k(cat), 5.41 s(-1); K(m), 32 micro M) and Met-Gly-Pro-Arg*Gly-Phe-Pro-Gly-Ser (k(cat), 351 s(-1); K(m), 214 micro M), where the asterisks denote the scissile bonds. The cloned scpA gene encoded a protein of 553 amino acids with a calculated molecular mass of 57,167 Da. Heterologous expression of the scpA gene in the Escherichia coli cells yielded a mature 37-kDa species after a two-step proteolytic cleavage of the precursor protein. Sequencing of the scpA gene revealed that ScpA was a collagenolytic member of the serine-carboxyl proteinase family (the S53 family according to the MEROPS database), which is a recently identified proteinase family on the basis of crystallography results. Unexpectedly, ScpA was highly similar to a member of this family, kumamolysin, whose specificity toward macromolecular substrates has not been defined.     

The new fluorogenic substrates of neutrophil proteinase 3 optimized in prime site region

Previously selected by the combinatorial chemistry approach, potent fluorogenic substrate of proteinase 3 was used as the starting structure to design new substrates. The general formula of the synthesized peptides is as follows: ABZ-Tyr-Tyr-Abu-ANB-X-NH₂, where ANB (5-amino-2-nitrobenzoic acid) served as a chromophore and an acceptor of fluorescence, ABZ (aminobenzoic acid) is a donor of fluorescence in these fluorescence resonance energy transfer (FRET) peptides, and X is a proteinogenic amino acid (except Cys). The introduced modifications influenced substrate activity of the synthesized peptides. The highest value of specificity constant for proteinase 3 was obtained for the single peptide with Gln in the discussed position (k_cat/K_M = 275,000 M⁻¹ s⁻¹), which was nearly twice as active as the reference compound (lacking a substituent in the X position). In addition, more efficient energy transfer was observed, due mainly to the bathochromic effect for the introduced modification. This approach opens a new possibility to design potent and highly specific substrates of proteinase 3 and other proteinases optimized in the prime site region.     

Rational design of a SHP-2 targeted,fluorogenic peptide substrate

Protein tyrosine phosphatase (PTP) targeted, peptide based chemical probes are valuable tools for studying this important family of enzymes, despite the inherent difficulty of developing peptides targeted towards an individual PTP. Here, we have taken a rational approach to designing a SHP-2 targeted, fluorogenic peptide substrate based on information about the potential biological substrates of SHP-2. The fluorogenic, phosphotyrosine mimetic phosphocoumaryl aminopropionic acid (pCAP) provides a facile readout for monitoring PTP activity. By optimizing the amino acids surrounding the pCAP residue, we obtained a substrate with the sequence Ac-DDPI-pCAP-DVLD-NH₂ and optimized kinetic parameters (k_cat = 0.059 ± 0.008 s⁻¹, K_m = 220 ± 50 µM, k_cat/K_m of 270 M⁻¹s⁻¹). In comparison, the phosphorylated coumarin moiety alone is an exceedingly poor substrate for SHP-2, with a k_cat value of 0.0038 ± 0.0003 s⁻¹, a K_m value of 1100 ± 100 µM and a k_cat/K_m of 3 M⁻¹s⁻¹. Furthermore, this optimized peptide has selectivity for SHP-2 over HePTP, MEG1 and PTPµ. The data presented here demonstrate that PTP-targeted peptide substrates can be obtained by optimizing the sequence of a pCAP containing peptide.     

scpA, a new salicylate hydroxylase gene localized in salicylate/caprolactam degradation plasmids

Both caprolactams and salicylate biodegradation by Pseudomonas salicylate/caprolactam degraders are controlled by large conjugative plasmids (SAL/CAP). Some of these plasmids have been assigned to the P-7 incompatibility group. The new salicylate 1-hydroxylase gene (scpA) has been detected in SAL/CAP plasmids and partially sequenced. The scpA gene was equally related to the closest homolog genes nahG (NAH7), salA (P. reinekei MT1), and nahU (pND6-1); however, the identity rate did not exceed 72–74%. The synthesis of salicylate 1-hydroxylase ScpA was not induced by salicylate. This enzyme had wide substrate specificity and exhibited the highest specific activity toward 4-methylsalicylate and nonsubstituted salicylate substrates. Furthermore, conjugative pseudomonads’ plasmids of salicylate degradation without the classical nah2 operon, which harbors only salicylate 1-hydroxylase gene nahU have been described for the first time.     

OptZyme: Computational Enzyme Redesign Using Transition State Analogues

OptZyme is a new computational procedure for designing improved enzymatic activity (i.e., k_cat or k_cat/K_M) with a novel substrate. The key concept is to use transition state analogue compounds, which are known for many reactions, as proxies for the typically unknown transition state structures. Mutations that minimize the interaction energy of the enzyme with its transition state analogue, rather than with its substrate, are identified that lower the transition state formation energy barrier. Using Escherichia coli β-glucuronidase as a benchmark system, we confirm that K_M correlates (R² = 0.960) with the computed interaction energy between the enzyme and the para-nitrophenyl- β, D-glucuronide substrate, k_cat/K_M correlates (R² = 0.864) with the interaction energy of the transition state analogue, 1,5-glucarolactone, and k_cat correlates (R² = 0.854) with a weighted combination of interaction energies with the substrate and transition state analogue. OptZyme is subsequently used to identify mutants with improved K_M, k_cat, and k_cat/K_M for a new substrate, para-nitrophenyl- β, D-galactoside. Differences between the three libraries reveal structural differences that underpin improving K_M, k_cat, or k_cat/K_M. Mutants predicted to enhance the activity for para-nitrophenyl- β, D-galactoside directly or indirectly create hydrogen bonds with the altered sugar ring conformation or its substituents, namely H162S, L361G, W549R, and N550S.     

Purification and characterization of a collagenolytic serine proteinase from the skeletal muscle of red sea bream (Pagrus major)

A collagenolytic serine proteinase (CSP) was purified from red sea bream (Pagrus major) skeletal muscle to homogeneity by ammonium sulfate fractionation and chromatographies including DEAE-Sephacel, Phenyl Sepharose and Hydroxyapatite. The molecular mass of CSP was approximately 85 kDa as estimated by SDS–PAGE and gel filtration. Optimum temperature and pH of CSP were 40 °C and 8.0, respectively. CSP was specifically inhibited by serine proteinase inhibitors, while inhibitors to other type proteinases did not show much inhibitory effects. The K_m and k_cat values of CSP for Boc-Leu-Lys-Arg-MCA were 3.58 µM and 0.13 s^? 1 at 37 °C, respectively. Furthermore, CSP hydrolyzed gelatin and native type I collagen effectively though its degradation on myosin heavy chain (MHC) was not significant, suggesting its involvement in the texture tenderization of fish muscle during the post-mortem stage.     

Unique Plasmids Generated via pUC Replicon Mutagenesis in an Error-Prone Thermophile Derived from Geobacillus kaustophilus HTA426

The plasmid pGKE75-cat_A138T, which comprises pUC18 and the cat_A138T gene encoding thermostable chloramphenicol acetyltransferase with an A138T amino acid replacement (CAT_A138T), serves as an Escherichia coli-Geobacillus kaustophilus shuttle plasmid that confers moderate chloramphenicol resistance on G. kaustophilus HTA426. The present study examined the thermoadaptation-directed mutagenesis of pGKE75-cat_A138T in an error-prone thermophile, generating the mutant plasmid pGKE75^αβ-cat_A138T responsible for substantial chloramphenicol resistance at 65°C. pGKE75^αβ-cat_A138T contained no mutation in the cat_A138T gene but had two mutations in the pUC replicon, even though the replicon has no apparent role in G. kaustophilus. Biochemical characterization suggested that the efficient chloramphenicol resistance conferred by pGKE75^αβ-cat_A138T is attributable to increases in intracellular CAT_A138T and acetyl-coenzyme A following a decrease in incomplete forms of pGKE75^αβ-cat_A138T. The decrease in incomplete plasmids may be due to optimization of plasmid replication by RNA species transcribed from the mutant pUC replicon, which were actually produced in G. kaustophilus. It is noteworthy that G. kaustophilus was transformed with pGKE75^αβ-cat_A138T using chloramphenicol selection at 60°C. In addition, a pUC18 derivative with the two mutations propagated in E. coli at a high copy number independently of the culture temperature and high plasmid stability. Since these properties have not been observed in known plasmids, the outcomes extend the genetic toolboxes for G. kaustophilus and E. coli.     

A new kumamolisin-like protease from Alicyclobacillus acidocaldarius: an enzyme active under extreme acidic conditions

A new serine-carboxyl proteinase, called kumamolisin-ac, was purified from the thermoacidophilic bacterium Alicyclobacillus acidocaldarius. The enzyme is a monomeric protein of 45?kDa, active over a wide temperature range (5.0–70°C) and extremely acidic pHs (1.0–4.0), showing maximal proteolytic activity at pH?2.0 and 60°C. Interestingly, kumamolisin-ac displayed a significant proteolytic activity even at 5°C, thus suggesting a sort of cold-adaptation for this enzyme. The protease was remarkably stable at high temperatures (t_1/2 at 80°C, 10?h, pH?2.0) and over a broad range of pH (2.0–7.0). Substrate analysis indicated that kumamolisin-ac was active on a variety of macromolecular substrates, such as haemoglobin, hide powder azure, and azocoll. In particular, a high specific activity was detected towards collagen. The corresponding gene was cloned, expressed and the recombinant protease, was found to be homologous to proteases of the ‘S53’ family. From the high identity with kumamolisin and kumamolisin-As, known as collagenolytic proteases, kumamolisin-ac can be considered as the third collagenolytic affiliate within the ‘S53’ family. Cleavage specificity investigation of kumamolisin-ac revealed a unique primary cleavage site in bovine insulin B-chain, whereas a broad specificity was detected using bovine α-globin as substrate. Thus, kumamolisin-ac could represent an attractive candidate for industrial-scale biopeptide production under thermoacidophilic conditions.     

Isolation and divalent-metal activation of a β-xylosidase,RUM630-BX

The gene encoding RUM630-BX, a β-xylosidase/arabinofuranosidase, was identified from activity-based screening of a cow rumen metagenomic library. The recombinant enzyme is activated as much as 14-fold (k_cat) by divalent metals Mg²⁺, Mn²⁺ and Co²⁺ but not by Ca²⁺, Ni²⁺, and Zn²⁺. Activation of RUM630-BX by Mg²⁺ (t_0.5 144 s) is slowed two-fold by prior incubation with substrate, consistent with the X-ray structure of closely related xylosidase RS223-BX that shows the divalent-metal activator is at the back of the active-site pocket so that bound substrate could block its entrance. The enzyme is considerably more active on natural substrates than artificial substrates, with activity (k_cat/K_m) of 299 s⁻¹ mM⁻¹ on xylotetraose being the highest reported.     

Design of selective substrates of proteinase 3 using combinatorial chemistry methods

In this study, chemical synthesis of the selective chromogenic/fluorogenic substrates for proteinase 3 is described. The substrates’ sequence was obtained using combinatorial chemistry methods. Deconvolution of the tripeptide library against proteinase 3 with general formula ABZ-X₃-X₂-X₁-ANB-NH₂ yielded the active sequence. Selected peptide was further modified on its C terminus to investigate the impact of chromophore moiety modification on enzyme-substrate interaction. To determine specificity, activity of selected substrates was characterized against proteinase 3 and neutrophil elastase. Finally, the peptide ABZ-Tyr-Tyr-Abu-ANB-NH₂ displayed the highest value of specificity constant (k_cat/K_M = 189 × 10³ M⁻¹ s⁻¹) for proteinase 3. To the best of our knowledge, this is the first short peptide that undergoes selective proteolysis by proteinase 3 and displays no significant hydrolysis in the presence of human neutrophil elastase and cathepsin G.     

A New Group of Aromatic Prenyltransferases in Fungi,Catalyzing a 2,7-Dihydroxynaphthalene 3-Dimethylallyl-transferase Reaction

Five fungal genomes from the Ascomycota (sac fungi) were found to contain a gene with sequence similarity to a recently discovered small group of bacterial prenyltransferases that catalyze the C-prenylation of aromatic substrates in secondary metabolism. The genes from Aspergillus terreus NIH2624, Botryotinia fuckeliana B05.10 and Sclerotinia sclerotiorum 1980 were expressed in Escherichia coli, and the resulting His₈-tagged proteins were purified and investigated biochemically. Their substrate specificity was found to be different from that of any other prenyltransferase investigated previously. Using 2,7-dihydroxynaphthalene (2,7-DHN) and dimethylallyl diphosphate as substrates, they catalyzed a regiospecific Friedel-Crafts alkylation of 2,7-DHN at position 3. Using the enzyme of A. terreus, the K_m values for 2,7-DHN and dimethylallyl diphosphate were determined as 324 ± 25 μm and 325 ± 35 μm, respectively, and k_cat as 0.026 ± 0.001 s⁻¹. A significantly lower level of prenylation activity was found using dihydrophenazine-1-carboxylic acid as aromatic substrate, and only traces of products were detected with aspulvinone E, flaviolin, or 4-hydroxybenzoic acid. No product was formed with l-tryptophan, l-tyrosine, or 4-hydroxyphenylpyruvate. The genes for these fungal prenyltransferases are not located within recognizable secondary metabolic gene clusters. Their physiological function is yet unknown.     

Substrate specificity and kinetic framework of a DNAzyme with an expanded chemical repertoire: a putative RNaseA mimic that catalyzes RNA hydrolysis independent of a divalent metal cation

This work addresses the binding, cleavage and dissociation rates for the substrate and products of a synthetic RNaseA mimic that was combinatorially selected using chemically modified nucleoside triphosphates. This trans-cleaving DNAzyme, 9₂₅-11t, catalyzes sequence-specific ribophosphodiester hydrolysis in the total absence of a divalent metal cation, and in low ionic strength at pH 7.5 and in the presence of EDTA. It is the first such sequence capable of multiple turnover. 9₂₅-11t consists of 31 bases, 18 of which form a catalytic domain containing 4 imidazole and 6 allylamino modified nucleotides. This sequence cleaves the 15 nt long substrate, S1, at one embedded ribocytosine at the eighth position to give a 5′-product terminating in a 2′,3′-phosphodiester and a 3′-product terminating in a 5′-OH. Under single turnover conditions at 24°C, 9₂₅-11t displays a maximum first-order rate constant, k_cat, of 0.037 min⁻¹ and a catalytic efficiency, k_cat/K_m, of 5.3 × 10⁵ M⁻¹ min⁻¹. The measured value of k_cat under catalyst excess conditions agrees with the value of k_cat observed for steady-state multiple turnover, implying that slow product release is not rate limiting with respect to multiple turnover. The substrate specificity of 9₂₅-11t was gauged in terms of k_cat values for substrate sequence variants. Base substitutions on the scissile ribose and at the two bases immediately downstream decrease k_cat values by a factor of 4 to 250, indicating that 9₂₅-11t displays significant sequence specificity despite the lack of an apparent Watson–Crick base-pairing scheme for recognition.     

Human Cytochrome P450 21A2, the Major Steroid 21-Hydroxylase: STRUCTURE OF THE ENZYME·PROGESTERONE SUBSTRATE COMPLEX AND RATE-LIMITING C–H BOND CLEAVAGE*

Cytochrome P450 (P450) 21A2 is the major steroid 21-hydroxylase, and deficiency of this enzyme is involved in ∼95% of cases of human congenital adrenal hyperplasia, a disorder of adrenal steroidogenesis. A structure of the bovine enzyme that we published previously (Zhao, B., Lei, L., Kagawa, N., Sundaramoorthy, M., Banerjee, S., Nagy, L. D., Guengerich, F. P., and Waterman, M. R. (2012) Three-dimensional structure of steroid 21-hydroxylase (cytochrome P450 21A2) with two substrates reveals locations of disease-associated variants. J. Biol. Chem. 287, 10613–10622), containing two molecules of the substrate 17α-hydroxyprogesterone, has been used as a template for understanding genetic deficiencies. We have now obtained a crystal structure of human P450 21A2 in complex with progesterone, a substrate in adrenal 21-hydroxylation. Substrate binding and release were fast for human P450 21A2 with both substrates, and pre-steady-state kinetics showed a partial burst but only with progesterone as substrate and not 17α-hydroxyprogesterone. High intermolecular non-competitive kinetic deuterium isotope effects on both k_cat and k_cat/K_m, from 5 to 11, were observed with both substrates, indicative of rate-limiting C–H bond cleavage and suggesting that the juxtaposition of the C21 carbon in the active site is critical for efficient oxidation. The estimated rate of binding of the substrate progesterone (k_on 2.4 × 10⁷ m⁻¹ s⁻¹) is only ∼2-fold greater than the catalytic efficiency (k_cat/K_m = 1.3 × 10⁷ m⁻¹ s⁻¹) with this substrate, suggesting that the rate of substrate binding may also be partially rate-limiting. The structure of the human P450 21A2-substrate complex provides direct insight into mechanistic effects of genetic variants.     

Purification and Characterization of a Keratinolytic Serine Proteinase from Streptomyces albidoflavus

Streptomyces strain K_1-02, which was identified as a strain of Streptomyces albidoflavus, secreted at least six extracellular proteases when it was cultured on feather meal-based medium. The major keratinolytic serine proteinase was purified to homogeneity by a two-step procedure. This enzyme had a molecular weight of 18,000 and was optimally active at pH values ranging from 6 to 9.5 and at temperatures ranging from 40 to 70°C. Its sensitivity to protease inhibitors, its specificity on synthetic substrates, and its remarkably high level of NH₂-terminal sequence homology with Streptomyces griseus protease B (SGPB) showed that the new enzyme, designated SAKase, was homologous to SGPB. We tested the activity of SAKase with soluble and fibrous substrates (elastin, keratin, and type I collagen) and found that it was very specific for keratinous substrates compared to SGPB and proteinase K.     

Miltpain, a cysteine proteinase, from milt of Pacific cod (Gadus macrocephalus): purification and characterization

Miltpain (EC.3.4.22.-) is a cysteine proteinase that preferentially hydrolyzes basic proteins, previously found in the milt of chum salmon. Here we report a similar cysteine proteinase in the milt of the marine Pacific cod. The enzyme was isolated and purified 6900-fold and with an estimated mass of 63 kDa by gel filtration chromatography and 72 kDa by SDS/PAGE. Cod miltpain has an optimum pH of 6.0 for Z-Arg-Arg-MCA hydrolysis, and K_m of 11.5 μM and k_cat of 19.0 s⁻¹ with Z-Arg-Arg-MCA. It requires a thiol-inducing reagent for activation and is inhibited by E-64, iodoacetamide, CA-074, PCMB, NEM, TLCK, TPCK, ZPCK and o-phenanthroline. This proteinase strongly hydrolyzes basic proteins such as salmine, clupeine and histone, and exhibits unique substrate specificity toward paired basic residues such as Lys-Arg, Arg-Arg on the substrates of P2-P1. The isoelectric point is 5.2 by isoelectric focusing. N-Terminal sequencing gave a sequence of <EVPVEVVRXYVTSAPEK. The cysteine proteinase from Pacific cod very closely matches the previously reported miltpain from chum salmon.     

Synthesis and characterization of novel fluorogenic substrates of coagulation factor XIII-A

Further development of our recently published Glu(pNA)-containing peptides (Anal. Biochem. 428 (2012) 73–80) provided new fluorogenic substrates for the activated blood coagulation factor XIII. A first series was designed by incorporation of Glu(AMC) at the penultimate position from the N terminus. For the best derivative H-Tyr-Glu(AMC)-Val-Lys-Val-Ile-NH₂, a moderate k_cat/K_m value of 34 s⁻¹ M⁻¹ was determined, which is more than 100-fold reduced compared with the previously reported Glu(pNA) substrates. Furthermore, two fluorescence resonance energy transfer (FRET) substrates were prepared by incorporation of an N-methyl-anthraniloyl fluorophore and a 2,4-dinitrophenyl quencher. Both substrates were excellently cleaved by FXIII-A₂^∗, which is generated from its zymogen by activation of thrombin in the presence of calcium ions. In the absence and presence of H-Gly-ethyl ester, k_cat/K_m values of 8010 and 8660 s⁻¹ M⁻¹, respectively, were found for the conversion of H-Lys(N(Me)Abz)-Glu(NH-(CH₂)₄-NH-Dnp)-Val-Lys-Val-Ile-Gly-NH₂ (substrate 8). These values are more than 200-fold improved compared with the Glu(AMC) substrates. Substrate 8 is suitable for the measurement of FXIII-A₂^∗ activities in plasma samples as well as for in vitro measurements. Furthermore, it was used for the determination of the inhibitory potency of a newly synthesized chloromethyl ketone derivative, Cbz-Phe-Glu(CMK)-Val-Lys-Val-Ile-Gly-NH₂, which was found to be a potent irreversible inhibitor of FXIII-A₂^∗.     

Purification and Characterization of an X-Prolyl-Dipeptidyl Peptidase from Lactobacillus sakei

An X-prolyl-dipeptidyl peptidase has been purified from Lactobacillus sakei by ammonium sulfate fractionation and five chromatographic steps, which included hydrophobic interaction, anion-exchange chromatography, and gel filtration chromatography. This procedure resulted in a recovery yield of 7% and an increase in specificity of 737-fold. The enzyme appeared to be a dimer with a subunit molecular mass of approximately 88 kDa. Optimal activity was shown at pH 7.5 and 55°C. The enzyme was inhibited by serine proteinase inhibitors and several divalent cations (Cu²⁺, Hg²⁺, and Zn²⁺). The enzyme almost exclusively hydrolyzed X-Pro from the N terminus of each peptide as well as fluorescent and colorimetric substrates; it also hydrolyzed X-Ala at the N terminus, albeit at lower rates. K_m s for Gly-Pro- and Lys-Ala-7-amido-4-methylcoumarin were 29 and 88 μM, respectively; those for Gly-Pro- and Ala-Pro-p-nitroanilide were 192 and 50 μM, respectively. Among peptides, β-casomorphin 1-3 was hydrolyzed at the highest rates, while the relative hydrolysis of the other tested peptides was only 1 to 12%. The potential role of the purified enzyme in the proteolytic pathway by catalyzing the hydrolysis of peptide bonds involving proline is discussed.     

Characterization of the 2',3' cyclic phosphodiesterase activities of Clostridium thermocellum polynucleotide kinase-phosphatase and bacteriophage lambda phosphatase

Clostridium thermocellum polynucleotide kinase-phosphatase (CthPnkp) catalyzes 5′ and 3′ end-healing reactions that prepare broken RNA termini for sealing by RNA ligase. The central phosphatase domain of CthPnkp belongs to the dinuclear metallophosphoesterase superfamily exemplified by bacteriophage λ phosphatase (λ-Pase). CthPnkp is a Ni²⁺/Mn²⁺-dependent phosphodiesterase-monoesterase, active on nucleotide and non-nucleotide substrates, that can be transformed toward narrower metal and substrate specificities via mutations of the active site. Here we characterize the Mn²⁺-dependent 2′,3′ cyclic nucleotide phosphodiesterase activity of CthPnkp, the reaction most relevant to RNA repair pathways. We find that CthPnkp prefers a 2′,3′ cyclic phosphate to a 3′,5′ cyclic phosphate. A single H189D mutation imposes strict specificity for a 2′,3′ cyclic phosphate, which is cleaved to form a single 2′-NMP product. Analysis of the cyclic phosphodiesterase activities of mutated CthPnkp enzymes illuminates the active site and the structural features that affect substrate affinity and k_cat. We also characterize a previously unrecognized phosphodiesterase activity of λ-Pase, which catalyzes hydrolysis of bis-p-nitrophenyl phosphate. λ-Pase also has cyclic phosphodiesterase activity with nucleoside 2′,3′ cyclic phosphates, which it hydrolyzes to yield a mixture of 2′-NMP and 3′-NMP products. We discuss our results in light of available structural and functional data for other phosphodiesterase members of the binuclear metallophosphoesterase family and draw inferences about how differences in active site composition influence catalytic repertoire.     

A Chlorogenic Acid Esterase with a Unique Substrate Specificity from Ustilago maydis

An extracellular chlorogenic acid esterase from Ustilago maydis (UmChlE) was purified to homogeneity by using three separation steps, including anion-exchange chromatography on a Q Sepharose FF column, preparative isoelectric focusing (IEF), and, finally, a combination of affinity chromatography and hydrophobic interaction chromatography on polyamide. SDS-PAGE analysis suggested a monomeric protein of ∼71 kDa. The purified enzyme showed maximal activity at pH 7.5 and at 37°C and was active over a wide pH range (3.5 to 9.5). Previously described chlorogenic acid esterases exhibited a comparable affinity for chlorogenic acid, but the enzyme from Ustilago was also active on typical feruloyl esterase substrates. Kinetic constants for chlorogenic acid, methyl p-coumarate, methyl caffeate, and methyl ferulate were as follows: K_m values of 19.6 μM, 64.1 μM, 72.5 μM, and 101.8 μM, respectively, and k_cat/K_m values of 25.83 mM⁻¹ s⁻¹, 7.63 mM⁻¹ s⁻¹, 3.83 mM⁻¹ s⁻¹ and 3.75 mM⁻¹ s⁻¹, respectively. UmChlE released ferulic, p-coumaric, and caffeic acids from natural substrates such as destarched wheat bran (DSWB) and coffee pulp (CP), confirming activity on complex plant biomass. The full-length gene encoding UmChlE consisted of 1,758 bp, corresponding to a protein of 585 amino acids, and was functionally produced in Pichia pastoris GS115. Sequence alignments with annotated chlorogenic acid and feruloyl esterases underlined the uniqueness of this enzyme.     

Gene Cloning, Purification, and Characterization of a Phosphodiesterase from Delftia acidovorans

A novel phosphodiesterase (PdeA) was purified from Delftia acidovorans, the gene encoding the enzyme was cloned and expressed in Escherichia coli, and the recombinant enzyme was purified to apparent homogeneity and characterized. PdeA is an 85-kDa trimer that exhibits maximal activity at 65°C and pH 10 even though it was isolated from a mesophilic bacterium. Although PdeA exhibited both mono- and diesterase activity, it was most active on the phosphodiester bis(p-nitrophenyl)phosphate with a K_m of 2.9 ± 0.1 mM and a k_cat of 879 ± 73 min⁻¹. The enzyme showed sequence similarity to cyclic AMP (cAMP) phosphodiesterase and cyclic nucleotide phosphodiesterases and exhibited activity on cAMP in vivo when the gene was expressed in E. coli. The IS1071 transposon insertion sequence was found downstream of pdeA.