Production of tetramethylpyrazine by batch culture of <Emphasis Type="Italic">Bacillus subtilis</Emphasis> with optimal pH control strategy

The effects of initial culture pH ranging from 5.0 to 7.5 on biomass content, precursor 3-hydroxy-2-butanone (HB) accumulation, and 2,3,5,6-tetramethylpyrazine (TTMP) formation by Bacillus subtilis CCTCC M 208157 were investigated in shake flask fermentation. Weak acidic conditions were found to favor cell growth and precursor HB accumulation, while TTMP could be synthesized more efficiently in conditions with initial pH towards neutrality. Batch bioprocess of TTMP fermentation by Bacillus subtilis CCTCC M 208157 at various controlled pH values ranging from 5.5 to 7.0 was then examined in 7.5-l fermentor. The results suggested that optimum pH for cell growth and precursor HB accumulation was 5.5 with maximum cell growth rate (Q _x) and precursor HB accumulation rate (Q _HB) of 0.833 g l⁻¹ h⁻¹ and 1.118 g l⁻¹ h⁻¹, respectively, while optimum pH for TTMP formation was 7.0 with maximum TTMP formation rate (Q _TTMP) of 0.095 g l⁻¹ h⁻¹. A pH-shifted strategy was accordingly developed to improve TTMP production in bioreactor fermentation by shifting the culture pH from 5.5 to 7.0 after 48 h of cultivation. By applying the strategy, final TTMP concentration of 7.43 g l⁻¹ was obtained, being 22.2% greater than that of constant-pH fermentation.     

A feeding strategy for tetramethylpyrazine production by Bacillus subtilis based on the stimulating effect of ammonium phosphate

To examine the effects of ammonium salts on tetramethylpyrazine (TTMP) production by Bacillus subtilis CCTCC M 208157, different ammonium salts were tested, and diammonium phosphate (DAP) was found to have a predominant effect on stimulating TTMP synthesis. The DAP requirements for TTMP production were then investigated, experimental results showed that higher concentrations of DAP favored TTMP production, while both the ammonium and phosphate ions exhibited inhibitory effects on the cell growth and precursor 3-hydroxy-2-butanone accumulation. Based on the results above, a DAP feeding strategy was developed and verified in further experiments. By applying the proposed fed-batch strategy, the maximum TTMP concentrations reached 7.46 and 7.34 g/l in flask and fermenter experiments, increased by 55.1 and 29.0% compared to that of the batch TTMP fermentation, respectively. To our knowledge, these results, i.e., TTMP yields in flask or fermenter fermentations, were new records on TTMP fermentation by B. subtilis.     

Regulating the molar fraction of 4-hydroxybutyrate in Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by biological fermentation and enzymatic degradation

The regulation of 4-hydroxybutyrate (4HB) molar fraction in the poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] of a local isolate Cupriavidus sp. USMAA1020 was attempted by employing a feeding strategy through fed-batch fermentation in 100-L fermenter. The growth of Cupriavidus sp. USMAA1020 was enhanced by frequently feeding carbon and nitrogen at a ratio of 5 (C/N 5) using a DO-stat with cascade mode at 20% (v/v) dissolved oxygen (DO). The feeding of C/N 5 and the use of the DO-stat mode were able to regulate the 4HB composition from 0–67 mol% by sequential feeding of γ-butyrolactone and supplementing oleic acid. A high 4HB molar fraction of 67 mol% with a PHA concentration of 5.2 g/L was successfully obtained by employing this feeding strategy. Notably, enzymatic degradation carried out enhanced the 4HB composition of the copolymer synthesized. PHB depolymerase enzyme from Acidovorax sp. was used to degrade this P(3HB-co-70-mol%4HB) copolymer and the 4HB composition could be increased up to 83 mol%. The degradation process was observed by monitoring the time-dependent change in the weight loss of copolymer films. The percentage of weight loss of solvent-cast film increased proportionally up to 19% within 3 h, whereas salt-leached films showed 90% of weight loss within 3 h of incubation and were completely degraded by 4 h. The molecular weight (M _n ) of the films treated with enzyme demonstrated a slight decrease. SEM observation exhibited a rough surface morphology of the copolymer degraded with depolymerase enzyme.     

Bacillus sp. mutant for improved biodegradation of Congo red: Random mutagenesis approach

This study presents the improved biodegradation of Congo red, a toxic azo dye, using mutant Bacillus sp. obtained by random mutagenesis of wild Bacillus sp. using UV and ethidium bromide. The mutants obtained were screened based on their decolorization performance and best mutants were selected for further studies. Better decolorization was observed in the initial Congo red concentration range 100–1000 mg/l for wild species whereas mutant strain was found to offer better decolorization up to 3000 mg/l. Mutant strain offered 12–30% reduction in time required for the complete decolorization by wild strain. The optimum pH and temperature were found to be 7.0 and 37 °C, respectively. Two efficient strains such as Bacillus sp. ACT 1 and Bacillus sp. ACT 2 were isolated from the various mutants obtained. Bacillus sp. ACT 2 showed improved enzymatic production and Bacillus sp. ACT 1 showed improved growth compared to wild strain. The enzyme responsible for the degradation was found to be azoreductase by SDS–PAGE and about 53% increased production of enzyme was achieved with mutant species. The experimental data were modeled using growth and substrate inhibition models.     

Microbial production of 4-hydroxybutyrate,poly-4-hydroxybutyrate,and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by recombinant microorganisms

4-Hydroxybutyrate (4HB) was produced by Aeromonas hydrophila 4AK4, Escherichia coli S17-1, or Pseudomonas putida KT2442 harboring 1,3-propanediol dehydrogenase gene dhaT and aldehyde dehydrogenase gene aldD from P. putida KT2442 which are capable of transforming 1,4-butanediol (1,4-BD) to 4HB. 4HB containing fermentation broth was used for production of homopolymer poly-4-hydroxybutyrate [P(4HB)] and copolymers poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-4HB)]. Recombinant A. hydrophila 4AK4 harboring plasmid pZL-dhaT-aldD containing dhaT and aldD was the most effective 4HB producer, achieving approximately 4 g/l 4HB from 10 g/l 1,4-BD after 48 h of incubation. The strain produced over 10 g/l 4HB from 20 g/l 1,4-BD after 52 h of cultivation in a 6-L fermenter. Recombinant E. coli S17-1 grown on 4HB containing fermentation broth was found to accumulate 83 wt.% of intracellular P(4HB) in shake flask study. Recombinant Ralstonia eutropha H16 grew to over 6 g/l cell dry weight containing 49 wt.% P(3HB-13%4HB) after 72 h.     

Production of poly-3-hydroxybutyrate by Bacillus sp. JMa5 cultivated in molasses media

A strain of Bacillus sp. coded JMa5 was isolated from molasses contaminated soil. The strain was able to grow at a temperature as high as 45°C and in 250 g/l molasses although the optimal growth temperature was 35–37°C. Cell density reached 30 g/l 8 h after inoculation in a batch culture with an initial concentration of 210 g/l molasses. Under fed-batch conditions, the cells grew to a dry weight of 70 g/l after 30 h of fermentation. The strain accumulated 25–35%, (w/w) polyhydroxybutyrate (PHB) during fermentation. PHB accumulation was a growth-associated process. Factors that normally promote PHB production include high ratios of carbon to nitrogen, and carbon to phosphorus in growth media. Low dissolved oxygen supply resulted in sporulation, which reduced PHB contents and dry weights of the cells. It seems that sporulation induced by reduced supply of nutrients is the reason that PHB content is generally low in the Bacillus strain.     

Heterologous expression of <Emphasis Type="Italic">Cupriavidus</Emphasis> sp. USMAA2-4 PHA synthase gene in PHB<Superscript>−</Superscript>4 mutant for the production of poly(3-hydroxybutyrate) and its copolymers

Ecological deterioration and human health concerns arising from the usage of non-biodegradable plastics have prompted mankind to search for greener alternatives which are biodegradable, biocompatible and easily produced from renewable sources. Polyhydroxyalkanoates (PHA), among other biopolymers, are emerging as a viable replacement for fossil fuel-based synthetic plastics. A PHA-producing strain, identified as Cupriavidus sp. (designated Cupriavidus sp. USMAA2-4) was isolated from a soil sample from western peninsular Malaysia. Heterologous expression of the PHA synthase gene (phaC _USMAA2-4) in mutant C. necator PHB⁻4 complemented its PHA-producing ability. More than 60 wt% of P(3HB) was synthesized from various plant oils. The highest P(3HB) production of 2.38 g/l at 68 wt% was attained when crude palm kernel oil was fed as the sole carbon source. The 3HV molar fraction in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] was significantly affected by the type of the precursor used and their respective feeding time. The 3HV molar fraction ranged from 4 to 31 mol% when sodium propionate/valerate was fed at different cultivation times. In addition, with the supplementation of 4HB-monomer precursors, approximately 67 wt% P(3HB-co-4HB) with 4–5 mol% of 4-hydroxybutyrate monomer was synthesized, regardless of the precursor feeding time used. Variation in the molar fraction of the second monomer along with its biodegradability and biocompatibility characteristics promotes the potential of these copolymers as replacements for traditional commodity plastics.     

Production of cyclodextrin glucanotransferase from an alkalophilic <Emphasis Type="Italic">Bacillus</Emphasis> sp. by pH-stat fed-batch fermentation

Batch and fed-batch fermentation processes were employed to culture an alkalophilic Bacillus sp. for the production of cyclodextrin glucanotransferase (CGTase). CGTase production was repressed by glucose and induced by soluble starch. By fed-batch fermentation, a CGTase activity up to 56 unit ml⁻¹ with 65 g dry cells l⁻¹ were achieved. The CGTase activity and cell density were increased 360 and 510%, respectively, from those values achieved with batch fermentation.     

Production of copolymer poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) through a one-step cultivation process

A one-step cultivation process for the production of biodegradable polymer poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] by Cupriavidus sp. USMAA2-4 was carried out using various carbon sources. It was found that Cupriavidus sp. USMAA2-4 could produce approximately 44 wt.% copolymer of P(3HB-co-4HB) with 27 mol% 4HB composition when the combination of oleic acid and 1,4-butanediol are used as carbon sources in 60 h cultivation. The manipulation of carbon-to-nitrogen ratio (C/N) resulted in the increase of dry cell weight, PHA content as well as 4HB composition. A new strategy of introducing oleic acid and 1,4-butanediol together and separately at different concentration demonstrated different yield in PHA content ranging from 47 to 58 wt.%. The molecular weight obtained was 234 kDa (by adding 1,4-butanediol and oleic acid together) and 212 kDa (by adding 1,4-butanediol separately). The copolymer of P(3HB-co-4HB) produced by Cupriavidus sp. USMAA2-4 was detected statistically as a random copolymer when analysed by nuclear magnetic resonance (NMR) spectroscopy.     

Oily sludge degradation by bacteria from Ankleshwar, India

Three bacterial strains, Bacillus sp. SV9, Acinetobacter sp. SV4 and Pseudomonas sp., SV17 from contaminated soil in Ankleshwar, India were tested for their ability to degrade the complex mixture of petroleum hydrocarbons (such as alkanes, aromatics, resins and asphaltenes), sediments, heavy metals and water known as oily sludge. Gravimetric analysis showed that Bacillus sp. SV9 degraded approx. 59% of the oily sludge in 5 days at 30 °C whereas Acinetobacter sp. SV4 and Pseudomonas sp. SV17 degraded 37% and 35%. Capillary gas chromatographic analysis revealed that after 5 days the Bacillus strain was able to degrade oily sludge components of chain length C₁₂–C₃₀ and aromatics more effectively than the other two strains. Maximum drop in surface tension (from 70 to 28.4 mN/m) was accompanied by maximum biosurfactant production (6.7 g l⁻¹) in Bacillus sp. SV9 after 72 h, these results collectively indicating that this bacterial strain has considerable potential for bioremediation of oily sludge.     

Metabolic engineering of Bacillus sp. for diacetyl production

Diacetyl, a highly valuable product that is extensively used as an ingredient of food, tobacco, and daily chemicals such as perfumes, can be produced from the nonenzymatic oxidative decarboxylation of α-acetolactate during bacterial fermentation and converted to acetoin and 2,3-butanediol by 2,3-butanediol dehydrogenase. In the present study, Bacillus sp. DL01, which gives high acetoin production, was metabolically engineered to improve diacetyl production. After the deletion of α-acetolactate decarboxylase (ALDC)-encoding gene (alsD) by homologous recombination, the engineered strain, named Bacillus sp. DL01-ΔalsD, lost ALDC activity and produced 1.53 g/L diacetyl without acetoin and 2,3-butanediol accumulation. The channeling of carbon flux into diacetyl biosynthetic pathway was amplified by an overexpressed α-acetolactate synthase (ALS)-encoding gene (alsS) in Bacillus sp. DL01-ΔalsD-alsS, which produced 4.02 g/L α-acetolactate and 1.94 g/L diacetyl, and the conversion from α-acetolactate to diacetyl was increased by 1-fold after 20 mM Fe³⁺ was added to the fermentation medium. A titer of 8.69 g/L diacetyl, the highest reported diacetyl production, was achieved by fed-batch fermentation in optimal conditions using the metabolically engineered strain of Bacillus sp. DL01-ΔalsD-alsS. These results are of great importance as a new method for the efficient production of diacetyl by food-safe bacteria.     

Exploring the application of biostimulation strategy for bacteria in the bioremediation of industrial effluent

The purpose of this study was to isolate and characterise toxic element-resistant bacteria from acid mine drainage water and to apply them in the bioremediation of industrial effluent, as well as to identify optimal effluent:nutrient concentration for onsite biostimulation strategy. Wastewater samples were collected from acid mine drainage and industry. Inductively coupled plasma optical emission spectroscopy (ICP-OES) was employed for elemental composition analysis. Isolated bacterial strains were characterised using molecular methods. Bioremediation assays were employed to determine the extent of bacterial tolerance and removal of toxic elements using a biostimulation strategy employing minimal salt medium (MSM) at varied concentrations and positive and negative controls of only MSM and industrial effluent, respectively. Two bacterial strains demonstrated resistance to toxic elements, Bacillus sp. MGI101 and Lysinibacillus sp. MGI102 both isolated from the AMD sites. However, no observable growth of toxic metal-resistant bacteria was obtained from the industrial effluents. Bacterial strains MGI101 and MGI102 demonstrated high resistance to target toxic elements during the screening and tolerance assays. Remarkably, Bacillus sp. MGI101 demonstrated greater ability to remove toxic elements including arsenic, chromium, zinc, copper and aluminium in undiluted solutions of the industrial effluent, with its highest removal capacity observed at > 60% for arsenic and aluminium. Both Bacillus sp.MGI101 and Lysinibacillus sp. MGI102 demonstrated varied abilities for the removal of toxic elements from dilution concentration of effluent mixed with MSM. However, the optimal dilution ratio observed in this experiment was 5:15 (effluent:MSM). Overall results demonstrated that isolated bacterial strains have the potential to be employed in bioremediation programmes of acid mine drainages and multi-element contaminated water.

     

Enhanced production of l‐lactic acid by Lactobacillus thermophilus SRZ50 mutant generated by high‐linear energy transfer heavy ion mutagenesis

The aim of this study was to improve l ‐lactic acid production of Lactobacillus thermophilus SRZ50. For this purpose, high efficient heavy‐ion mutagenesis technique was performed using SRZ50 as the original strain. To enhance the screening efficiency for high yield l ‐lactic acid producers, a scale‐down from shake flask to microtiter plate was developed. The results showed that 24‐well U‐bottom MTPs could well alternate shake flasks for L. thermophilus cultivation as a scale‐down tool due to its a very good comparability to the shake flasks. Based on this microtiter plate screening method, two high l ‐lactic acid productivity mutants, A59 and A69, were successfully screened out, which presented, respectively, 15.8 and 16.2% higher productivities than that of the original strain. Based on fed‐batch fermentation, the A69 mutant can accumulate 114.2 g/L l ‐lactic acid at 96 h. Hence, the proposed traditional microbial breeding method with efficient high‐throughput screening assay was proved to be an appropriate strategy to obtain lactic acid‐overproducing strain.     

Isolation and characterization of a new <Emphasis Type="Italic">Bacillus</Emphasis> sp. 50-3 with highly alkaline keratinase activity from <Emphasis Type="Italic">Calotes versicolor</Emphasis> faeces

A new native feather-degrading bacterium has been isolated from the faeces of the agamid lizard Calotes versicolor, collected from the Beijing Zoo in China. The isolate, which has been identified as Bacillus sp. 50-3 based on morphological and biochemical and 16S rDNA tests, was shown to degrade native feather completely at 37°C and pH 7.0 within 36 h when using chicken feathers as the sole carbon and nitrogen source. Bacillus sp. 50-3 presented optimum growth at 37°C and pH 7.0 in feather meal medium. Under these conditions, the maximum keratinase activity (680 ± 25 U/ml) was also achieved. The keratinase of Bacillus sp. 50-3 was active over a broad range of pH values and temperatures toward azokeratin, and presented an optimum pH and temperature of 10.0 and 60°C, respectively. Furthermore, it was relatively heat-and alkali-stable. Inhibitor studies showed that it seemed to belong to the serine-metalloprotease type. Therefore, the enzyme from Bacillus sp. 50-3 is a novel, high alkaline keratinase, suggesting its potential use in biotechnological processes.     

Isolation and characterization of four novel Gram-positive bacteria associated with the rhizosphere of two endemorelict plants capable of degrading a broad range of aromatic substrates

Four new Gram-positive, phenol-degrading strains were isolated from the rhizospheres of endemorelict plants Ramonda serbica and Ramonda nathaliae known to exude high amounts of phenolics in the soil. Isolates were designated Bacillus sp. PS1, Bacillus sp. PS11, Streptomyces sp. PS12, and Streptomyces sp. PN1 based on 16S rDNA sequence and biochemical analysis. In addition to their ability to tolerate and utilize high amounts of phenol of either up to 800 or up to 1,400 mg l⁻¹ without apparent inhibition in growth, all four strains were also able to degrade a broad range of aromatic substrates including benzene, toluene, ethylbenzene, xylenes, styrene, halogenated benzenes, and naphthalene. Isolates were able to grow in pure culture and in defined mixed culture on phenol and on the mixture of BTEX (benzene, toluene, ethylbenzene, and xylenes) compounds as a sole source of carbon and energy. Pure culture of Bacillus sp. PS11 yielded 1.5-fold higher biomass amounts in comparison to mixed culture, under all conditions. Strains successfully degraded phenol in the soil model system (2 g kg⁻¹) within 6 days. Activities of phenol hydroxylase, catechol 1,2-dioxygenase, and catechol 2,3-dioxygenase were detected and analyzed from the crude cell extract of the isolates. While all four strains use ortho degradation pathway, enzyme indicative of meta degradation pathway (catechol 2,3-dioxygenase) was also detected in Bacillus sp. PS11 and Streptomyces sp. PN1. Phenol degradation activities were induced 2 h after supplementation by phenol, but not by catechol. Catechol slightly inhibited activity of catechol 2,3-dioxygenase in strains PS11 and PN1.     

Extraction,purification and characterization of an antioxidant from marine waste using protease and chitinase cocktail

Marine waste is a highly renewable resource for the recovery of several value added metabolites with prospective industrial applications. This study describes the production of enzymes on marine waste and their subsequent use for the extraction of antioxidants from marine waste. Microbispora sp. and Bacillus sp. were grown on colloidal chitin and marine waste for the production of chitinase and protease. Microbispora sp. could produce 10.2 U ml⁻¹ chitinase, whereas Bacillus sp. could produce 38 U ml⁻¹ chitinase and 3.39 U ml⁻¹ protease. The production of antioxidants was optimized using statistical designs and 6.6 units of 35 kDa chitinase from Microbispora sp., 16 units of 25 kDa chitinase from Bacillus sp., 2.3 units of protease, 1.5% marine waste and 36 h incubation gave maximum antioxidant activity. Nearly 5.0 mg of compound with antioxidant activity could be recovered per gram of marine waste. This compound was purified by HPLC and characterized by TLC, FT-IR and proton-NMR as N,N′-diacetylchitobiose. It exhibited 53% superoxide radical scavenging activity, 57% hydroxyl radical scavenging activity and 28% lipid peroxidation inhibition activity. Scale up of the extraction of antioxidant from marine waste and its pharmacological studies can extend its use in medicine.     

Production of cyclodextrin glucanotransferase from alkalophilic Bacillus sp. TS1-1: Optimization of carbon and nitrogen concentration in the feed medium using central composite design

Optimisation of nutrient feeding was developed to overcome the limitation in batch fermentation and to increase the CGTase production from Bacillus sp. TS1-1 in fed batch fermentation. Optimisation of the C/N ratio in the feed stream was conducted in a 5 l fermenter, where feeding was initiated at constant rate of 0.02 h⁻¹. In our initial screening process, the addition of nitrogen source boosted the growth of the microbes, but on the other hand reduced the CGTase production. The amount of tapioca starch and yeast extract was optimised in order to obtain a sufficient growth and thus, increased the CGTase production. Results were analysed using three-dimensional response surface plot, and the optimised values of carbon and nitrogen concentration of 3.30% (w/v) and 0.13% (w/v) were obtained, respectively. CGTase activity increased up to 80.12 U/ml, which is 13.94% higher as compared to batch fermentation (70.32 U/ml). This also led to 14.54% increment of CGTase production in fed batch culture as compared to the production before the optimisation. The CGTase activity obtained was close to the predicted value, which is 78.05 U/ml.     

Production of poly(3-hydroxybutyrate) from whey by fed-batch culture of recombinant Escherichia coli in a pilot-scale fermenter

Production of poly(3-hydroxybutyrate) [P(3HB)] from wheyby fed-batch culture of recombinant Escherichia coli CGSC 4401 harboring a plasmid containing the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes was examined in a 30 l fermenter supplying air only. With lactose below 2 g l^–1, cells grew to 12 g dry cell l^–1 with 9% (w/w) P(3HB) content. Accumulation of P(3HB) could be triggered by increasing lactose to 20 g l^–1. By employing this strategy, 51 g dry cell l^–1 was obtained with a 70% (w/w) P(3HB) content after 26 h. The productivity was 1.35 g P(3HB) l^–1 h^–1. The same fermentation strategy was used in a 300 l fermenter, and 30 g dry cell l^–1 with 67% (w/w) P(3HB) content was obtained in 20 h.     

Production and characterization of PHB from two novel strains of Bacillus spp. isolated from soil and activated sludge

The present study reports two bacteria, designated 87I and 112A, which were isolated from soil and activated sludge samples from Hyderabad, India, and that are capable of producing poly-3-hydroxybutyrate (PHB). Based on phenotypical features and genotypic investigations, these microorganisms were identified as Bacillus spp. Their optimal growth occurred between 28°C and 30°C and pH 7. Bacillus sp. 87I yielded a maximum of 70.04% dry cell weight (DCW) PHB in medium containing glucose as carbon source, followed by 55.5% DCW PHB in lactose-containing medium, whereas Bacillus sp. 112A produced a maximum of 67.73% PHB from glucose, 58.5% PHB from sucrose, followed by 50.5% PHB from starch as carbon substrates. The viscosity average molecular mass (M _v) of the polymers from Bacillus sp. 87I was 513 kDa and from Bacillus sp. 112A was 521 kDa. All the properties of the biopolymers produced by the two strains 87I and 112A were characterized.     

Microbiology of the fermentation ofTelfaria seeds for ogiri production

Summary Ogiri was prepared from seeds of fluted pumpkin in the traditional way. Microorganisms associated with the fermentation were identified asBacillus sp.,Staphylococcus aureus,Pseudomonas sp. andLactobacillus sp. The temperature increased to 40°C during the fermentation, while the pH first increased to 7.8 then dropped to 6.0 by the end of fermentation. The characteristic taste and strong aroma of the ogiri is attributed to the proteolytic and lipolytic activities of the isolates.

---

Microbiologie de la fermentation des graines de Telefaria pour la production d'ogiri

Résumé On a préparé l'ogiri à partir de graines de potiron à cannelures à la manière traditionnelle. Les microorganismes associés à la fermentation ont été identifiés commeBacillus sp.,Staphylococcus aureus, Pseudomonas sp. etLactobacillus sp. La température monte à 40°C pendant la fermentation, tandis que le pH augmente d'abord à 7.8 pour décroître ensuite à 6.0 à la fin de la fermentation. Le goût caractéristique et l'arôme fort de l'ogiri sont attribuables aux activités protéolytiques et lipolytiques des isolats.