HLA-typing analysis following allogeneic bone grafting for sinus lifting

According to the Brazilian Association of Organ Transplants, in 2015, 19,408 bone transplants were performed in Brazil, over 90% by Dental Surgeons. The surgical technique itself has a respectable number of reports regarding its clinical efficacy, as measured by long-term survival of dental implants in grafted areas. Uncertainty remains, however, as to whether fresh frozen grafts from human bone donors remain immunologically innocuous in the body of the host. Six male with no previous medical history of note, including systemic diseases, surgery or blood transfusion were selected. These patients underwent reconstructive procedures (sinus lifting) using fresh frozen human bone from a tissue bank. All patients had venous blood samples collected prior to surgery and 6 months after the procedure. Anti-HLA analysis for the detection of HLA (human leukocyte antigen) antibodies was performed using methods such as the LABScreen PRA Class I and Class II, LABScreen Single Antigen Class I and Class II, Luminex Platform. Reactive individuals to the screening tests (LABScreen PRA) were further investigated to determine the specificity of the antibodies detected (LABScreen Single Antigen) with a cutoff value of median fluorescence intensity ≥500. As a result, it was observed that two patients (33%) were positive in screening tests, one presenting with anti-HLA Class I and II sensitization and the other with anti-HLA class II. The specificity analysis showed that the patients sensitized to HLA class II presented 4 specificities, 3 of which immunologically relevant. In the second individual, 23 specificities were identified, 6 of which immunologically important for HLA class I and 4 specificities for HLA class II, 3 of these were immunologically important. All specificities detected had average fluorescence. These findings are suggestive that sinus-lifting procedures with allogeneic bone can induce immunological sensitization.     

Reconstruction of the edentulous mandible with fresh frozen bone grafts and implants: a 4-year report of a prospective clinical study

Allogen bones from tissue bank are often used in dentistry although the data analyzing the long-term success in mandible are scarce. This study evaluated by computed tomography scans (CTS) the bone resorption around the implants installed on fresh frozen bone (FFB) previously grafted, after 4 years of occlusal rehabilitation. Six subjects were grafted with blocks in posterior mandible using FFB. After 6 months, 27 implants were placed and after further 4 months the prostheses were delivered. Following 4 years of the final rehabilitation procedures, another CTS was done in order to measure the resorption in periimplant bone crest at the proximal implant surfaces. It was observed a 100 % survival rate of the implants after 4 years of the fixture installation. The marginal bone resorption after 48 months was 2.82 ± 1.63 mm and no statistical significant difference was observed along the region where the implants were fixed when compared with the interimplantar space. In addition there was no significant correlation regarding the length of the implant used and the amount of marginal bone resorption. The conclusion is that grafted areas with FFB are suitable to implant installation in the posterior mandible.     

OSFE植骨与不植骨种植修复的临床效果对比研究

目的:比较上颌窦挤压内提升(OSFE)植骨与不植骨种植修复的临床效果。方法:选择上颌后牙区种植修复的35例患者,其剩余牙槽嵴高度(RBH)为4~8 mm,共植入43颗种植体。A组16例患者为植骨组,20个种植位点,牙槽骨可用骨高度平均(5.87±1.19)mm,植入人工骨粉后植入种植体;B组19例患者为不植骨组,23个种植位点,缺牙区牙槽骨可用骨高度平均(5.67±1.10)mm,上颌窦提升后直接植入种植体。6个月后行二期手术完成修复。采用临床检查、X线检查及视觉模拟评分法(visual analogue scale,VAS)进行效果评价。结果:两组病例的牙槽嵴高度差异比较无统计学意义。在平均约36.7个月的随访期内,A组种植体的存留率为100%(20/20),B组中有1枚种植体因咬合力过大及口腔卫生较差脱落,种植体的存留率为95.6%(22/23),两组病例的存留率比较无统计学差异。两组患者的VAS值比较亦相当。所有种植体骨结合良好,种植体周围软组织无炎症,种植义齿咀嚼功能良好。结论:在严格控制适应症、准确掌握种植技巧的前提下,RBH在4~8 mm之间的病例无需额外植入骨代替材料即可取得理想的修复效果,简化了手术的操作,减少了手术的风险和创伤,节省了手术的时间和费用,易被患者接受。     

Effects of cyclical therapy for osteoporosis using an oral regimen of inorganic phosphate and sodium etidronate: a clinical and bone histomorphometric study

Cyclical therapy for osteoporosis has been proposed as a means to induce a coherently structured improvement in bone remodelling dynamics. This pilot study involved 37 osteoporotic patients with symptomatic vertebral compression fractures, treated with an oral protocol designed to activate endogenous bone turnover and selectively depress osteoclastic bone resorption, utilizing inorganic phosphate and sodium etidronate respectively in sequential 3 monthly cycles. Biochemical parameters were recorded during the first cycle, and quantitative bone histomorphometry was obtained from iliac crest biopsies before and after 23.4 ± 8.5 (SEM) months of treatment. In addition, fracture rates (expressed as new vertebral fractures/1000 patient years) were studied by sequential lateral spinal radiographs. Lumbar bone mineral density (BMD) was assessed by sequential dual-beam photon densitometry. The results demonstrated equivocal biochemical evidence of 2 ° hyperparathyroidism during the initial cycle of therapy with inorganic phosphate. However, fracture rates declined significantly from 640/1000 patient years during the first 15 months therapy to 242/1000 patient years during a further 20 months follow-up (P < 0.01). Lumbar BMD increased over baseline by 8.38 ± 2.87% after 12 months treatmen (P < 0.01). Bone histomorphometric analysis disclosed a modest increment in bone volume from 16.0 to 17.4% tissue volume, and a significant increase in eroded surface from 4.2 ± 0.6 to 6.0 ± 0.9% cancellous surface (P < 0.05). However, histomorphometric parameters of bone formation deteriorated. It is concluded that this cyclical protocol resulted in short-term improvement in trabecular bone mass, but there is no evidence at a cellular level that long-term improvements in bone remodelling occurred.     

Evaluation of bone remodeling around single dental implants of different lengths: a mechanobiological numerical simulation and validation using clinical data

Algorithmic models have been proposed to explain adaptive behavior of bone to loading; however, these models have not been applied to explain the biomechanics of short dental implants. Purpose of present study was to simulate bone remodeling around single implants of different lengths using mechanoregulatory tissue differentiation model derived from the Stanford theory, using finite elements analysis (FEA) and to validate the theoretical prediction with the clinical findings of crestal bone loss. Loading cycles were applied on 7-, 10-, or 13-mm-long dental implants to simulate daily mastication and bone remodeling was assessed by changes in the strain energy density of bone after a 3, 6, and 12 months of function. Moreover, clinical findings of marginal bone loss in 45 patients rehabilitated with same implant designs used in the simulation (n = 15) were computed to validate the theoretical results. FEA analysis showed that although the bone density values reduced over time in the cortical bone for all groups, bone remodeling was independent of implant length. Clinical data showed a similar pattern of bone resorption compared with the data generated from mathematical analyses, independent of implant length. The results of this study showed that the mechanoregulatory tissue model could be employed in monitoring the morphological changes in bone that is subjected to biomechanical loads. In addition, the implant length did not influence the bone remodeling around single dental implants during the first year of loading.     

Numerical investigation of bone remodelling around immediately loaded dental implants using sika deer (Cervus nippon) antlers as implant bed

This study combines finite element method and animal studies, aiming to investigate tissue remodelling processes around dental implants inserted into sika deer antler and to develop an alternative animal consuming model for studying bone remodelling around implants. Implants were inserted in the antlers and loaded immediately via a self-developed loading device. After 3, 4, 5 and 6 weeks, implants and surrounding tissue were taken out. Specimens were scanned by μCT scanner and finite element models were generated. Immediate loading and osseointegration conditions were simulated at the implant-tissue interface. A vertical force of 10 N was applied on the implant. During the healing time, density and Young’s modulus of antler tissue around the implant increased significantly. For each time point, the values of displacement, stresses and strains in the osseointegration model were lower than those of the immediate loading model. As the healing time increased, the displacement of implants was reduced. The 3-week immediate loading model (9878 ± 1965 μstrain) illustrated the highest strains in the antler tissue. Antler tissue showed similar biomechanical properties as human bone in investigating the bone remodelling around implants, therefore the use of sika deer antler model is a promising alternative in implant biomechanical studies.     

Three-dimensional numerical simulation of stress induced by different lengths of osseointegrated implants in the anterior maxilla

Lower survival rates were observed for the implant placed in the anterior maxilla. The purpose of this study was to investigate the influence of different implant lengths on the stress distribution around osseointegrated implants under a static loading condition in the anterior maxilla using a three-dimensional finite element analysis. The diameter of 4.0 mm external type implants of different lengths (8.5 mm, 10.0 mm, 11.5 mm, 13.0 mm, 15.0 mm) was used in this study. The anterior maxilla was assumed to be D3 bone quality. All the material was assumed to be homogenous, isotropic and linearly elastic. The implant–bone interface was constructed using a rigid element for simulating the osseointegrated condition. Then, 176 N of static force was applied on the middle of the palatoincisal line angle of the abutment at a 120°angle to the long axis of abutment. The von Mises stress value was measured with an interval of 0.25 mm along the bone–implant interface. Incremental increase in implant length causes a gradual reduction of maximum and average von Mises stress at the labial portion within the implant. In the bone, higher stress was concentrated within cortical bone area and more distributed at the labial cortex, while cancellous bone showed relatively low stress concentration and even distribution. An increase in implant length reduced stress gradients at the cortical peri-implant region. Implant length affects the mechanisms of load transmission to the osseointegrated implant. On the basis of this study the biomechanical stress-based performance of implants placed in the anterior maxilla improves when using longer implants.     

Bone loss in response to long-term glucocorticoid therapy

A number of studies have shown that an excess of glucocorticoids induces osteoporosis, but the mechanism(s) and the time course of the reduction of bone mass remain uncertain. In order to clarify this issue we carried out a longitudinal clinical and histomorphometric study of patients requiring long-term glucocorticoid treatment.In 23 patients (9 men, 10 post- and 4 premenopausal women) biochemical and bone histomorphometric investigations were carried out before and during treatment with 10–25 mg/day of prednisone. Histomorphometric analysis of bone biopsies of the iliac crest showed that the decrease of TBV (up to −27%, P < 0.001) occurs predominantly within the first 5–7 months of treatment; during the subsequent stages, which include observations after 12 months of treatment, only minor changes were observed. Therefore trabecular bone loss can be satisfactorily described by a negative exponential function. None of the other histomorphometric parameters (osteoid surfaces, resorption surfaces, etc.) showed significant changes. However, the histological features of the bone biopsies during steroid therapy, showing a virtual lack of osteoblastic activity, ruled out an increase of bone resorption. Moreover, the dynamic study of the bone formation by double tetracycline labelling showed, in a small subgroup of patients, a decrease of the apposition rates (from 0.763 ± 0.053 to 0.305 ± 0.074 μ/day (mean ± SE) after treatment).No significant changes, at any time during steroid treatment, were observed in serum alkaline phosphatase, 25-hydroxyvitamin D, 24,25-dihydroxyvitamin D, 1,25-dihydroxyvitamin D, parathyroid hormone or urinary calcium excretion. Serum calcium increased significantly within the first 1–2 months of therapy and then it returned to baseline. Urinary hydroxyproline excretion decreased significantly within the first 1–2 months and continued to fall throughout the treatment.Thus, both biochemical and histological findings suggest that long-term glucocorticoid therapy causes a reduction of bone turnover, that the bone loss occurs predominantly within the first 6 months of treatment and that patients with lower bone mass have a lower rate of bone loss.     

Bone ingrowth around porous-coated acetabular implant: a three-dimensional finite element study using mechanoregulatory algorithm

Fixation of uncemented implant is influenced by peri-prosthetic bone ingrowth, which is dependent on the mechanical environment of the implant–bone structure. The objective of the study is to gain an insight into the tissue differentiation around an acetabular component. A mapping framework has been developed to simulate appropriate mechanical environment in the three-dimensional microscale model, implement the mechanoregulatory tissue differentiation algorithm and subsequently assess spatial distribution of bone ingrowth around an acetabular component, quantitatively. The FE model of implanted pelvis subjected to eight static load cases during a normal walking cycle was first solved. Thereafter, a mapping algorithm has been employed to include the variations in implant–bone relative displacement and host bone material properties from the macroscale FE model of implanted pelvis to the microscale FE model of the beaded implant–bone interface. The evolutionary tissue differentiation was observed in each of the 13 microscale models corresponding to 13 acetabular regions. The total implant–bone relative displacements, averaged over each region of the acetabulum, were found to vary between 10 and 60 \(\upmu \hbox {m}\). Both the linear elastic and biphasic poroelastic models predicted similar mechanoregulatory peri-prosthetic tissue differentiation. Considerable variations in bone ingrowth (13–88 %), interdigitation depth (0.2–0.82 mm) and average tissue Young’s modulus (970–3430 MPa) were predicted around the acetabular cup. A progressive increase in the average Young’s modulus, interdigitation depth and decrease in average radial strains of newly formed tissue layer were also observed. This scheme can be extended to investigate tissue differentiation for different surface texture designs on the implants.     

A bone preservation protocol that enables evaluation of osseointegration of implants with micro- and nanotextured surfaces

Development of surface treatments has enabled secure attachment of dental implants in less than 1 month. Consequently, it is necessary to characterize accurately the osseointegration of the implant surface in the region of the bone-implant contact (BIC). We developed a method for sample preparation that preserves both bone and BIC to permit analysis of the contact interface. We prepared eight nanotextured implants and implanted them in rabbit tibias. After healing for 30 days, outcomes were analyzed using both our bone preservation protocol and routine decalcification followed by preparation of histological sections stained by hematoxylin and eosin (H & E). Pull-out tests for implant osseointegration were performed after healing. Non-implanted samples of rabbit mandible were used as a control for assessing organic and mineralized bone characteristics and bone structure. Our bone preservation protocol enabled evaluation of many of the same bone characteristics as histological sections stained with H & E. Our protocol enables analysis of implant samples, implant surfaces and osseointegration without risk of BIC damage.     

Influence of bicortical techniques in internal connection placed in premaxillary area by 3D finite element analysis

The aim of study was to evaluate the stress distribution in implant-supported prostheses and peri-implant bone using internal hexagon (IH) implants in the premaxillary area, varying surgical techniques (conventional, bicortical and bicortical in association with nasal floor elevation), and loading directions (0°, 30° and 60°) by three-dimensional (3D) finite element analysis. Three models were designed with Invesalius, Rhinoceros 3D and Solidworks software. Each model contained a bone block of the premaxillary area including an implant (IH, Ø4 × 10 mm) supporting a metal-ceramic crown. 178 N was applied in different inclinations (0°, 30°, 60°). The results were analyzed by von Mises, maximum principal stress, microstrain and displacement maps including ANOVA statistical test for some situations. Von Mises maps of implant, screws and abutment showed increase of stress concentration as increased loading inclination. Bicortical techniques showed reduction in implant apical area and in the head of fixation screws. Bicortical techniques showed slight increase stress in cortical bone in the maximum principal stress and microstrain maps under 60° loading. No differences in bone tissue regarding surgical techniques were observed. As conclusion, non-axial loads increased stress concentration in all maps. Bicortical techniques showed lower stress for implant and screw; however, there was slightly higher stress on cortical bone only under loads of higher inclinations (60°).     

Quantitation of HLA proteins incorporated by human immunodeficiency virus type 1 and assessment of neutralizing activity of anti-HLA antibodies

Human anti-human leukocyte antigen (HLA) antibodies were assessed for neutralizing activity against human immunodeficiency virus type 1 (HIV-1) carrying HLA alleles with matching specificity. Multiparous women carrying anti-HLA antibodies were identified. Plasma samples from those women were confirmed as having antibodies that specifically bound to HLA proteins expressed on the peripheral blood mononuclear cells (PBMCs) of their husbands. A primary HIV-1 isolate was cultured in the husband's PBMCs so that the virus carried matching HLA alleles. To determine the HIV-1-neutralizing activity of anti-HLA antibodies, the infectivity of the virus for GHOST cells (which express green fluorescent protein after HIV infection) was investigated in the presence of a plasma sample positive for the respective anti-HLA antibody. A neutralization assay was also performed using purified immunoglobulin G (IgG) from two plasma samples, and two plasma samples were investigated in the presence of complement. The prerequisite for anti-HLA antibody-mediated neutralization is incorporation of HLA proteins by HIV-1. Therefore, the extent of incorporation of HLA proteins by the primary HIV-1 isolate was estimated. The ratios of HLA class I protein to HIV-1 capsid (p24) protein cultured in the PBMCs of two healthy individuals were 0.017 and 0.054. These ratios suggested that the HIV-1 strain used in the assay incorporated more HLA proteins than gp160 trimers. Anti-HLA antibody-positive plasma was found to contain antibodies that specifically reacted to HIV-1 carrying cognate HLA alleles. However, incubation of HIV-1 with anti-HLA antibody- positive plasma or purified IgG did not show a reduction in viral infectivity. HIV-1-neutralizing activity was also not detected in the presence of complement. This study shows that HIV-1 primary isolates cultured in PBMCs contain significant amounts of HLA proteins. However, the binding of antibodies to those HLA proteins does not mediate a reduction in viral infectivity.     

Effect of thermodisinfection on mechanic parameters of cancellous bone

Revision surgery of joint replacements is increasing and raises the demand for allograft bone since restoration of bone stock is crucial for longevity of implants. Proceedings of bone grafts influence the biological and mechanic properties differently. This study examines the effect of thermodisinfection on mechanic properties of cancellous bone. Bone cylinders from both femoral heads with length 45 mm were taken from twenty-three 6–8 months-old piglets, thermodisinfected at 82.5 °C according to bone bank guidelines and control remained native. The specimens were stored at ?20 °C immediately and were put into 21 °C Ringer’s solution for 3 h before testing. Shear and pressure modulus were tested since three point bending force was examined until destruction. Statistical analysis was done with non-parametric Wilcoxon, t test and SPSS since p < 0.05 was significant. Shear modulus was significantly reduced by thermodisinfection to 1.02 ± 0.31 GPa from 1.28 ± 0.68 GPa for unprocessed cancellous bone (p = 0.029) since thermodisinfection reduced pressure modulus not significantly from 6.30 ± 4.72 GPa for native specimens to 4.97 ± 2.23 GPa and maximum bending force was 270.03 ± 116.68 N for native and 228.80 ± 70.49 N for thermodisinfected cancellous bone. Shear and pressure modulus were reduced by thermodisinfection around 20 % and maximum bending force was impaired by about 15 % compared with native cancellous bone since only the reduction of shear modulus reached significance. The results suggest that thermodisinfection similarly affects different mechanic properties of cancellous bone and the reduction of mechanic properties should not relevantly impair clinical use of thermodisinfected cancellous bone.     

Using 3D finite element models verified the importance of callus material and microstructure in biomechanics restoration during bone defect repair

Background: There is lack of further observations on the microstructure and material property of callus during bone defect healing and the relationships between callus properties and the mechanical strength. Methods: Femur bone defect model was created in rabbits and harvested CT data to reconstruct finite element models at 1 and 2 months. Three types of assumed finite element models were compared to study the callus properties, which assumed the material elastic property as heterogeneous (R-model), homogenous (H-model) or did not change from 1 to 2 months (U-model). Results: The apparent elastic moduli increased at 2 months (from 355.58 ± 132.67 to 1139.30 ± 967.43 MPa) in R-models. But there was no significant difference in apparent elastic moduli between R-models (355.58 ± 132.67 and 1139.30 ± 967.43 MPa) and H-models (344.79 ± 138.73 and 1001.52 ± 692.12 MPa) in 1 and 2 months. A significant difference of apparent elastic moduli was found between the R-model (1139.30 ± 967.43 MPa) and U-model group (207.15 ± 64.60 MPa) in 2 months. Conclusions: This study showed that the callus structure stability remodeled overtime to achieve a more effective structure, while the material quality of callus tissue is a very important factor for callus strength. At the meantime, this study showed an evidence that the material heterogeneity maybe not as important as it is in bone fracture model.     

Can the modeling for simplification of a dental implant surface affect the accuracy of 3D finite element analysis?

The aim of this study was to assess stress/strain of different implant modeling simplifications by 3D-FEA. Three variation of external hexagon implant (Ø3.75?×?10 mm) supporting one molar crown were simulated: A (no threads); B (slightly threads simplification); C (original design). 200 N (axial) and 100 N (oblique) were applied. Cortical bone was evaluated by maximum principal stress and microstrain qualitatively and quantitatively (ANOVA and Tukey post hoc (p < 0.05)). Higher stress levels (p < 0.05) were observed in model A. Models B and C presented similar stress transmission. It was possible to conclude that slightly simplification should be used for studies evaluating stress transferring for bone tissue.     

The evaluation of chorionic membrane in guided tissue regeneration for periodontal pocket therapy: a clinical and radiographic study

Periodontal regenerative therapy is aimed at reconstruction and to restore the architecture and function of lost or injured tissues. Melcher (J Periodontol 47(5):256–260, 1976) introduced the concept of guided tissue regeneration (GTR) for osseous reconstructive surgery. The aim of the present innovative clinical and radiographic study was to evaluate the effect of chorionic membrane (CM) in GTR in periodontal pocket therapy. Ten patients with moderate to severe periodontitis were selected in the single blind randomized controlled clinical trial. Patients were treated with periodontal pocket therapy along with CM in study sites and the control sites were treated with periodontal pocket therapy alone. The clinical parameters were recorded at baseline and 12 months. The radiographic parameters were recorded at baseline, 6 and 12 months. Clinical parameters included gingival index (GI), plaque index (PI), pocket probing depth (PPD) and relative attachment level (RAL). Digital images were analysed for bone gain (BG) and density. Data were evaluated using t test. Statistical significant differences were found in both sites at 12 months for GI, PI, PPD and RAL. Highly significant reduction was seen in GI 0.40 ± 0.08 (p = 0.0001), PI (0.41 ± 0.18), PPD 2.50 ± 0.53 mm (p = 0.0431) and increased BG 0.86 ± 0.18 (p < 0.0001) were observed in study sites. This shows that CM when used with pocket therapy can have influence on clinical parameters. Radiographic findings from this study demonstrated significant BG and density in sites treated with CM as compared to control sites.     

An improved method and cost effective strategy for soluble expression and purification of human N-myristoyltransferase 1 in E. coli

N-myristoyltransferase (NMT) is an indispensible enzyme, which exists as two isoforms (NMT1 and NMT2) in humans and has proven roles in development of cancerous states. It is thus a target for novel anti-cancer drug design, but understanding of the biochemical and functional differences of these isozymes is not fully deciphered. A soluble expression under the T7 promoter for human NMT1 was achieved in E. coli BL21 (DE3) cells, devoid of any isopropyl β-d-1-thiogalactopyranoside-based induction. The identity of expressed protein was confirmed by matrix-assisted laser desorption ionization mass spectrometry peptide-fingerprint analysis and a two-step purification protocol yielded homogeneous enzyme. The intact mass of the purified protein was verified by electrospray ionization mass spectrometry and found to be in agreement with the theoretical mass (48.141 vs. 48.140 kDa). The fluorescence spectrophotometric analyses of the ligand binding and enzyme activity demonstrated that the recombinant form is functional. The yield of purified protein was ~8–10 mg/L culture (batch to batch variation) with a specific activity value of 18,500 ± 513 U/mg of protein under the experimental conditions used. The final verification of the myristoylation was demonstrated by mass spectrometry analysis of reaction product. The described approach could be readily adapted for production of human NMT1, with high yields of pure enzyme preparations, which should aid in downstream applications involving inhibitor design and structure–function studies of NMT’s.     

Stress distribution in cylindrical and conical implants under rotational micromovement with different boundary conditions and bone properties: 3-D FEA

Factors related to micromovements at bone-implant interface have been studied because they are considered adverse to osseointegration. Simplifications are commonly observed in these FEA evaluations. The aim of this study was to clarify the influence of FEA parameters (boundary conditions and bone properties) on the stress distribution in peri-implant bone tissue when micromovements are simulated in implants with different geometries. Three-dimensional models of an anterior section of the jaw with cylindrical or conical titanium implants (4.1 mm in width and 11 mm in length) were created. Micromovement (50, 150, or 250 μm) was applied to the implant. The FEA parameters studied were linear vs. non-linear analyses, isotropic vs. orthogonal anisotropic bone, friction coefficient (0.3) vs. frictionless bone-implant contact. Data from von Mises, shear, maximum, and minimum principal stresses in the peri-implant bone tissue were compared. Linear analyses presented a relevant increase of the stress values, regardless of the bone properties. Frictionless contact reduced the stress values in non-linear analysis. Isotropic bone presented lower stress than orthogonal anisotropic. Conical implants behave better, in regard to compressive stresses (minimum principal), than cylindrical ones, except for nonlinear analyses when micromovement of 150 and 250 μm were simulated. The stress values raised as the micromovement amplitude increased. Non-linear analysis, presence of frictional contact and orthogonal anisotropic bone, evaluated through maximum and minimum principal stress should be used as FEA parameters for implant-micromovement studies.     

Influence of anisotropic bone properties on the biomechanical behavior of the acetabular cup implant: a multiscale finite element study

Although the biomechanical behavior of the acetabular cup (AC) implant is determinant for the surgical success, it remains difficult to be assessed due to the multiscale and anisotropic nature of bone tissue. The aim of the present study was to investigate the influence of the anisotropic properties of peri-implant trabecular bone tissue on the biomechanical behavior of the AC implant at the macroscopic scale. Thirteen bovine trabecular bone samples were imaged using micro-computed tomography (μCT) with a resolution of 18 μm. The anisotropic biomechanical properties of each sample were determined at the scale of the centimeter based on a dedicated method using asymptotic homogenization. The material properties obtained with this multiscale approach were used as input data in a 3D finite element model to simulate the macroscopic mechanical behavior of the AC implant under different loading conditions. The largest stress and strain magnitudes were found around the equatorial rim and in the polar area of the AC implant. All macroscopic stiffness quantities were significantly correlated (R² > 0.85, p < 6.5 e-6) with BV/TV (bone volume/total volume). Moreover, the maximum value of the von Mises stress field was significantly correlated with BV/TV (R² > 0.61, p < 1.6 e-3) and was always found at the bone-implant interface. However, the mean value of the microscopic stress (at the scale of the trabeculae) decrease as a function of BV/TV for vertical and torsional loading and do not depend on BV/TV for horizontal loading. These results highlight the importance of the anisotropic properties of bone tissue.     

Hydroxyapatite/regenerated silk fibroin scaffold-enhanced osteoinductivity and osteoconductivity of bone marrow-derived mesenchymal stromal cells

A novel hydroxyapatite/regenerated silk fibroin scaffold was prepared and investigated for its potential to enhance both osteoinductivity and osteoconductivity of bone marrow-derived mesenchymal stromal cells in vitro. Approx. 12.4 ± 0.06 % (w/w) hydroxyapatite was deposited onto the scaffold, and cell viability and DNA content were significantly increased (18.5 ± 0.6 and 33 ± 1.2 %, respectively) compared with the hydroxyapatite scaffold after 14 days. Furthermore, alkaline phosphatase activity in the novel scaffold increased 41 ± 2.5 % after 14 days compared with the hydroxyapatite scaffold. The data indicate that this novel hydroxyapatite/regenerated silk fibroin scaffold has a positive effect on osteoinductivity and osteoconductivity, and may be useful for bone tissue engineering.