Development of mechanistically based model for simulating soluble microbial products generation in an aerated/non-aerated SBR

Soluble microbial products (SMPs) are considered as the main organic components in wastewater treatment plant effluent from biological wastewater treatment systems. To investigate and explore SMP metabolism pathway for further treatment and control, two innovative mechanistically based activated sludge models were developed by extension of activated sludge model no.3 (ASM3). One was the model by combining SMP formation and degradation (ASM3-SMP model) processes with ASM3, and the other by combining both SMP and simultaneous substrate storage and growth (SSSG) mechanisms with ASM3 (SSSG-ASM3-SMP model). The detailed schematic modification and process supplements were introduced for comprehensively understanding all the mechanisms involved in the activated sludge process. The evaluations of these two models were demonstrated by a laboratory-scale sequencing batch reactor (SBR) operated under aerated/non-aerated conditions. The simulated and measured results indicated that SMP comprised about 83% of total soluble chemical oxygen demand (SCOD) in which biomass-associated products (BAPs) were predominant compared with utilization-associated products (UAPs). It also elucidated that there should be a minimum SMP value as the reactive time increases continuously and this conclusion could be used to optimize effluent SCOD in activated sludge processes. The comparative results among ASM3, ASM3-SMP and SSSG-ASM3-SMP models and the experimental measurements (SCOD, ammonia and nitrate nitrogen) showed clearly the best agreement with SSSG-ASM3-SMP simulation values (R = 0.993), strongly suggesting that both SMP formation and degradation and SSSG mechanisms are necessary in biologically activated sludge modeling for municipal wastewater treatment.     

Studies on nitrification of aniline with acclimated activated sludge

Aniline, a toxic, organic pollutant, occurs in a number of industrial effluents. Apart from carbonaceous oxygen demand, aniline imposes a nitrogenous oxygen demand, due to its nitrogen content, in excess of that required for cell growth. Incomplete biodegradation will result in ammonia production; this also exerts toxicity. Hence, nitrification of aniline should be ensured in the biological treatment before discharge into receiving streams. Aniline, however, is reported to inhibit the nitrification process. Aniline degradation was studied in laboratory continuous activated sludge with an acclimated culture developed in synthetic feed to determine the extent of complete biological degradation. Aniline-N (even at 400 mg/L aniline concentration)could be converted to nitrate-N with ammonium-N and nitrite-N formed as intermediates at a detention time of 24 h. The nitrification, however, was suppressed by aniline. The degradation of aniline to ammonia releases the suppression and the nitrification proceeds rapidly.     

The influence of fundamental design parameters on ciliates community structure in Irish activated sludge systems

The protozoan community in eleven activated sludge wastewater treatment plants (WWTPs) in the greater Dublin area has been investigated and correlated with key physio-chemical operational and effluent quality parameters. The plants represented various designs, including conventional and biological nutrient removal (BNR) systems. The aim of the study was to identify differences in ciliate community due to key design parameters including anoxic/anaerobic stages and to identify suitable bioindicator species for performance evaluation. BNR systems supported significantly different protozoan communities compared to conventional systems. Total protozoan abundance was reduced in plants with incorporated anoxic and anaerobic stages, whereas species diversity was either unaffected or increased. Plagiocampa rouxi and Holophrya discolor were tolerant to anoxic/anaerobic conditions and associated with high denitrification. Apart from process design, influent wastewater characteristics affect protozoan community structure. Aspidisca cicada was associated with low dissolved oxygen and low nitrate concentrations, while Trochilia minuta was indicative of good nitrifying conditions and good sludge settleability. Trithigmostoma cucullulus was sensitive to ammonia and phosphate and could be useful as an indicator of high effluent quality. The association rating assessment procedure of Curds and Cockburn failed to predict final effluent biological oxygen demand (BOD₅) indicating the method might not be applicable to treatment systems of different designs.     

Experimental investigation of the external nitrification biological nutrient removal activated sludge (ENBNRAS) system

A systematic lab-scale experimental investigation is reported for the external nitrification (EN) biological nutrient removal (BNR) activated sludge (ENBNRAS) system, which is a combined fixed and suspended medium system. The ENBNRAS system was proposed to intensify the treatment capacity of BNR-activated sludge (BNRAS) systems by addressing two difficulties often encountered in practice: (a) the long sludge age for nitrification requirement; and (b) sludge bulking. In the ENBNRAS system, nitrification is transferred from the aerobic reactor in the suspended medium activated sludge system to a fixed medium nitrification system. Thus, the sludge age of the suspended medium activated sludge system can be reduced from 20 to 25 days to 8 to 10 days, resulting in a decrease in reactor volume per ML wastewater treated of about 30%. Furthermore, the aerobic mass fraction can also be reduced from 50% to 60% to <30% and concommitantly the anoxic mass fraction can be increased from 25% to 35% to >55% (if the anaerobic mass fraction is 15%), and thus complete denitrification in the anoxic reactors becomes possible. Research indicates that both the short sludge age and complete denitrification could ameliorate anoxic aerobic (AA) or low food/microorganism (F/M) ratio filamentous bulking, and hence reduce the surface area of secondary settling tanks or increase the treatment capacity of existing systems. The lab-scale experimental investigations indicate that the ENBNRAS system can obtain: (i) very good chemical oxygen demand (COD) removal, even with an aerobic mass fraction as low as 20%; (ii) high nitrogen removal, even for a wastewater with a high total kjeldahl nitrogen (TKN)/COD ratio, up to 0.14; (iii) adequate settling sludge (diluted sludge volume index [DSVI] <100 mL/g); and (iv) a significant reduction in oxygen demand.     

Effect of cation binding agents on sludge solubilization potential of bacteria

The aim of the present study is to increase sludge solubilization potential of bacteria by the addition of cation binding agents. During the study, three strains of bacteria B1, B2 and B3 were isolated from waste activated sludge acclimatized to a thermophilic condition (55°C). Using these strains the mixed liquor suspended solids degradation was 67, 59, and 33% and the chemical oxygen demand solubilization enhancement was 71, 62, and 36% compared with the control. Cation binding agents such as citric acid, ethylenediaminetetraacetate and sodium tripolyphosphate were added to enhance the sludge solubilization further. Among these, citric acid along with B1 was more effective in solubilization with the mixed liquor suspended solids degradation of 110% and the chemical oxygen demand solubilization enhancement of 115%. 16s rRNA technique was used to identify the bacterial species B1 and it was found to be Bacillus licheniformis. It was also observed that mixed liquor suspended solids reduced rapidly when more soluble chemical oxygen demand was released, thereby increasing sludge solubilization.     

The performance and microbial communities of biodegradation-electron transfer with sulfur metabolism integrated process for flue gas desulfurization wastewater treatment

The biodegradation-electron transfer with sulfur metabolism integrated (BESI®) process was used for the treatment of real flue gas desulfurization wastewater. The BESI® process consists of an anaerobic activated sludge reactor, an anoxic activated sludge reactor, and an aerobic bio-film reactor. The performance of the integrated process was evaluated by the removal efficiencies of organics and nitrogen pollutants. The sulfate in the wastewater was used as an abundant sulfur source to drive the integrated process. The removal efficiencies of chemical oxygen demand, total organic carbon, ammonia nitrogen, and total nitrogen of the integrated process were 87.99, 87.04, 30.77, and 45.17%, respectively. High-throughput 454-pyrosequencing was applied for the analysis of microbial communities in the integrated process. From the anaerobic activated sludge (Sample 1), anoxic activated sludge (Sample 2), and aerobic bio-film (Sample 3), totals of 1701, 1181, and 857 operational taxonomic units were obtained, respectively. The sulfur cycle was associated with the removal of organics and nitrogen pollutants. The sulfate-reducing bacteria participated in the organics removal in the anaerobic reactor, and the sulfide oxidation was related with the denitrification in the anoxic reactor. A complete nitrogen degradation chain was built in the integrated process. Through the degradation chain, the nitrogenous organic pollutants, ammonia nitrogen, and nitrate could be removed. The participant functional bacteria were also detected by pyrosequencing.     

Enhanced biological treatment of saline wastewater by using halophilic bacteria

Biological treatment of saline wastewater by conventional activated sludge culture usually results in low removal of chemical oxygen demand (COD) because of plasmolysis of the organisms at high salt concentrations. Since salt removal operations by physicochemical processes before biological treatment are costly, a salt-tolerant organism (Halobacter halobium) was used for effective biological treatment of saline wastewater in this study. Halobacter halobium was used in activated sludge culture for COD removal from saline wastewater (1–5% salt) by fed-batch operation of an aeration tank. Inclusion of Halobacter halobium into activated sludge culture improved the rate and extent of COD removals especially with salt above 2% (w/v).     

Model-based analysis on growth of activated sludge in a sequencing batch reactor

A mathematical model is developed to describe the growth of multiple microbial species such as heterotrophs and autotrophs in activated sludge system. Performance of a lab-scale sequencing batch reactor involving storage process is used to evaluate the model. Results show that the model is appropriate for predicting the fate of major model components, i.e., chemical oxygen demand, storage polymers (X _STO), volatile suspended solid (VSS), ammonia, and oxygen uptake rate (OUR). The influence of sludge retention time (SRT) on reactor performance is analyzed by model simulation. The biomass components require different time periods from one to four times of SRT to reach steady state. At an SRT of 20 days, the active bacteria (autotrophs and heterotrophs) constitute about 57% of the VSS; the remaining biomass is not active. The model established demonstrates its capacity of simulating the reactor performance and getting insight in autotrophic and heterotrophic growth in complex activated sludge systems.     

Effect of dissolved oxygen concentration on sludge settleability

This laboratory study presents a detailed evaluation of the effects of dissolved oxygen concentration and accumulation of storage polymers on sludge settleability in activated sludge systems with an aerobic selector. The oxygen and substrate availability regime were simulated in laboratory sequencing batch reactor systems. The experiments showed that low dissolved oxygen concentration (1.1 mg O₂ l^–1) had a strong negative effect on sludge settleability, leading to the proliferation of filamentous bacteria (Thiothrix spp., Type 021N and Type 1851). This negative effect was stronger at high chemical oxygen demand loading rate. This indicates that a compartmentalised (plug flow) aerobic contact tank, designed at short hydraulic residence time to guarantee a strong substrate gradient, with low dissolved oxygen concentration, might be worse for sludge settleability than an "overdesigned" completely mixed contact tank. Contrary to the general hypothesis, the maximum specific acetate uptake rate, poly--hydroxybutyrate production rate, and resistance to short starvation periods are similar in both poor- and well-settling sludge. The results of this study support our previous hypothesis on the importance of substrate gradients for the development of filamentous structures in biological flocs, from soluble organic substrate gradients to dissolved oxygen gradients in sludge flocs.     

An efficient approach to automate the manual trial and error calibration of activated sludge models

An efficient approach is introduced to help automate the rather tedious manual trial and error way of model calibration currently used in activated sludge modeling practice. To this end, we have evaluated a Monte Carlo based calibration approach consisting of four steps: (i) parameter subset selection, (ii) defining parameter space, (iii) parameter sampling for Monte Carlo simulations and (iv) selecting the best Monte Carlo simulation thereby providing the calibrated parameter values. The approach was evaluated on a formerly calibrated full-scale ASM2d model for a domestic plant (located in The Netherlands), using in total 3 months of dynamic oxygen, ammonia and nitrate sensor data. The Monte Carlo calibrated model was validated successfully using ammonia, oxygen and nitrate data collected at high measurement frequency. Statistical analysis of the residuals using mean absolute error (MAE), root mean square error (RMSE) and Janus coefficient showed that the calibrated model was able to provide statistically accurate and valid predictions for ammonium, oxygen and nitrate. This shows that this pragmatic approach can perform the task of model calibration and therefore be used in practice to save the valuable time of modelers spent on this step of activated sludge modeling. The high computational demand is a downside of this approach but this can be overcome by using distributed computing. Overall we expect that the use of such systems analysis tools in the application of activated sludge models will improve the quality of model predictions and their use in decision making.     

New concept of contaminant removal from swine wastewater by a biological treatment process

Pollution from concentrated animal feeding operations (CAFOs) are the most serious pollution source in China now, and swine wastewater contains high concentrations of nutrients such as chemical oxygen demand (COD), biochemical oxygen demand 5 (BOD5), ammonium, and emergent contaminants related to public health. Biological processes are the most popular treatment methods for COD and ammonium removal. Considering the low operation cost, easy maintenance and high removal rate of contaminants in recent years, nitrogen removal via nitrite and real-time control processes using oxidation-reduction potential (ORP) and/or pH as parameters to control the aerobic and anaerobic cycles of a system has received much attention for animal wastewater treatment. During the biological treatment process, the emergent contaminants such as estrogen, antibiotics, and disinfec-tion reagents have been the focus of research recently, and degradation bacteria and resistance bacteria have also been extracted from activated sludge. The microbial analysis technique is also advancement in the field of biodegrada-tion bacteria and resistance bacteria. All of these advance-ments in research serve to improve wastewater treatment and decrease environmental hazards, especially for using manure as a fertilizer source for crop production.     

Behavior of 2,4-dichlorophenoxyacetic acid degradation and nitrogen conversion by an activated sludge

Summary Degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) was examined together with nitrogen conversion by using an activated sludge acclimated to artificial sewage containing 2,4-D and urea-N, which were the sole carbon and nitrogen sources, respevtively. Ammonification of urea and nitrification of ammonia proceeded concurrently with 2,4-D degradation by the acclimated activated sludge.     

Application of struvite precipitation as a pretreatment in treating swine wastewater

In this study, the effect of the pretreatment of NH₄-N by struvite precipitation on biological nitrogen removal was investigated in treating swine wastewater. Evaluation was mainly focused on nitrification which occurred in the activated sludge system after struvite precipitation. Laboratory experiments were performed at four different hydraulic retention times (HRT), i.e., 48, 32, 24 and 16 h. Results of the long-term operation of systems showed that the struvite precipitation used as the pretreatment of raw swine wastewater enhanced the nitrification performance in activated sludge system by reducing the applied loading rates of NH₄-N and TCOD in all operating conditions. The reduction of the applied NH₄-N loading rate kept the levels of free ammonia (FA) concentration in biological reactors low and it prevented nitrite accumulation. In addition, the struvite precipitation elicited the biological denitrification reaction and PO₄-P removal by increasing the ratios of carbon-to-nitrogen and carbon-to-phosphorus of wastewater after struvite precipitation. The struvite precipitation also enhanced the biological TCOD removal performance by reducing the toxic effect of FA. Triplicate INT-dehydrogenase tests clearly showed that FA inhibited the degradation of organic matter in activated sludge system. Finally, the struvite precipitation contributed to high TCOD, T-N and PO₄-P removals of 83, 90, and 97% by facilitating biological reaction at a short HRT of 16 h.     

Modeling of activated sludge wastewater treatment processes

The performance of an activated sludge wastewater treatment process consisting of an aeration tank and a secondary settler has been studied. A tanks-in-series model with backflow was used for mathematical modeling of the activated sludge wastewater treatment process. Non-linear algebraic equations obtained from the material balances of MLSS (mixed liquor suspended solids or activated sludge), BOD (biological oxygen demand) and DO (dissolved oxygen) for the aeration tank and the settler and from the behavior of the settler were solved simultaneously using the modified Newton-Raphson technique. The concentration profiles of MLSS, BOD and DO in the aeration tank were obtained. The simulation results were examined from the viewpoints of mixing in the aeration tank and flow in the secondary settling tank. The relationships between the overall performance of the activated sludge process and the operating and design parameters such as hydraulic residence time, influent BOD, recycle ratio and waste sludge ratio were obtained.     

The investigation of effect of organic carbon sources addition in anaerobic–aerobic (low dissolved oxygen) sequencing batch reactor for nutrients removal from wastewaters

The effect of addition of organic carbon sources (acetic acid and waste activated sludge alkaline fermentation liquid) on anaerobic–aerobic (low dissolved oxygen, 0.15–0.45 mg/L) biological municipal wastewater treatment was investigated. The results showed that carbon source addition affected not only the transformations of polyhydroxyalkanoates (PHA), glycogen, nitrogen and phosphorus, but the net removal of nitrogen and phosphorus. The removal efficiencies of TN and TP were, respectively, 61% and 61% without organic carbon source addition, 81% and 95% with acetic acid addition, and 83% and 97% with waste activated sludge alkaline fermentation liquid addition. It seems that the alkaline fermentation liquid of waste biosolids generated in biological wastewater treatment plant can be used to replace acetic acid as an additional carbon source to improve the anaerobic–aerobic (low dissolved oxygen) municipal wastewater nutrients removal although its use was observed to cause a slight increase of effluent BOD and COD concentrations.     

New concept of contaminant removal from swine wastewater by a biological treatment process

Pollution from concentrated animal feeding operations (CAFOs) are the most serious pollution source in China now, and swine wastewater contains high concentrations of nutrients such as chemical oxygen demand (COD), biochemical oxygen demand 5 (BOD₅), ammonium, and emergent contaminants related to public health. Biological processes are the most popular treatment methods for COD and ammonium removal. Considering the low operation cost, easy maintenance and high removal rate of contaminants in recent years, nitrogen removal via nitrite and real-time control processes using oxidation-reduction potential (ORP) and/or pH as parameters to control the aerobic and anaerobic cycles of a system has received much attention for animal wastewater treatment. During the biological treatment process, the emergent contaminants such as estrogen, antibiotics, and disinfection reagents have been the focus of research recently, and degradation bacteria and resistance bacteria have also been extracted from activated sludge. The microbial analysis technique is also advancement in the field of biodegradation bacteria and resistance bacteria. All of these advancements in research serve to improve wastewater treatment and decrease environmental hazards, especially for using manure as a fertilizer source for crop production.     

Simultaneous degradation of atrazine and phenol by Pseudomonas sp. strain ADP: effects of toxicity and adaptation

The strain Pseudomonas sp. strain ADP is able to degrade atrazine as a sole nitrogen source and therefore needs a single source for both carbon and energy for growth. In addition to the typical C source for Pseudomonas, Na(2)-succinate, the strain can also grow with phenol as a carbon source. Phenol is oxidized to catechol by a multicomponent phenol hydroxylase. Catechol is degraded via the ortho pathway using catechol 1,2-dioxygenase. It was possible to stimulate the strain in order to degrade very high concentrations of phenol (1,000 mg/liter) and atrazine (150 mg/liter) simultaneously. With cyanuric acid, the major intermediate of atrazine degradation, as an N source, both the growth rate and the phenol degradation rate were similar to those measured with ammonia as an N source. With atrazine as an N source, the growth rate and the phenol degradation rate were reduced to approximately 35% of those obtained for cyanuric acid. This presents clear evidence that although the first three enzymes of the atrazine degradation pathway are constitutively present, either these enzymes or the uptake of atrazine is the bottleneck that diminishes the growth rate of Pseudomonas sp. strain ADP with atrazine as an N source. Whereas atrazine and cyanuric acid showed no significant toxic effect on the cells, phenol reduces growth and activates or induces typical membrane-adaptive responses known for the genus Pseudomonas. Therefore Pseudomonas sp. strain ADP is an ideal bacterium for the investigation of the regulatory interactions among several catabolic genes and stress response mechanisms during the simultaneous degradation of toxic phenolic compounds and a xenobiotic N source such as atrazine.     

Influence of 2,4-dinitrophenol on the characteristics of activated sludge in batch reactors

The response of activated sludge characteristics to the presence of 2,4-dinitrophenol (dNP) in batch cultures was investigated in this study. The sludge yield slightly decreased with an increase in dNP concentration. At 10 mg l(-1), or lower, dNP significantly reduced sludge yield and relative specific growth rates (mu/mu0), but didn't substantially affect its relative specific chemical oxygen demand removal rate (q/q0). Presence of dNP at 1-20 mg l(-1) increased the specific oxygen uptake rate of activated sludge, and slightly changed its hydrophobicity. An analysis on inhibition indicated that the reduction in sludge yield in the presence of dNP was mainly attributed to the significant decreased sludge growth, rather than the reduced substrate degradation.     

Experimental optimization of a step aeration waste treatment process

Evolutionary operation (EVOP) was used to experimentally investigate the optimum steady state operating conditions for a step aeration activated sludge waste treatment process. A laboratory scale two tank step aeration activated sludge unit with fixed total volume, total influent flow rate, recycle flow rate, and sludge wasting rate was employed. The volume ratio and flow rate ratio which minimized effluent chemical oxygen demand were determined. The results indicate that EVOP is a useful technique for improving the performance of biological processes.     

Vitamin addition: an option for sustainable activated sludge process effluent quality

The process performance and metabolic rates of samples of activated sludge dosed with vitamin supplements have been compared. After initial screening, four vitamins and two metals as single supplements and in pairs, were dosed continuously into the mixed liquor of an activated sludge simulation. Toxicity, oxygen demand removal, respiration rates and suspended solids were measured to monitor the effect on process efficiency. It was confirmed experimentally that an industrial wastewater stream did not contain a sufficient supply of micronutrients for efficient biological treatment. This was concluded from the observation that control sludge batches (receiving no supplements) averaged chemical oxygen demand removal efficiency of 58%. Dosing micronutrients into the mixed liquor produced removal efficiencies of up to 69%. Some of the supplements increased the respiration rate of the sludge while some decreased it, indicating a range of stimulatory and inhibitory effects. Complex interactions between micronutrients that were dosed simultaneously were evident. Several positive effects led to the conclusion that micronutrients have the potential to optimise process performance of activated sludge plants treating industrial wastewater. The addition of phosphorus/niacin and molybdenum/lactoflavin removed wastewater components that were toxic to nitrifiers as indicated through toxicity testing, thus protecting downstream nitrification/denitrification treatment processes. Journal of Industrial Microbiology & Biotechnology (2000) 24, 267–274. Received 24 August 1999/ Accepted in revised form 06 January 2000