Specific DNA cleavage mediated by the integrase of conjugative transposon Tn916.

The conjugative transposon Tn916 encodes a protein called INT(Tn916) which, based on DNA sequence comparisons, is a member of the integrase family of site-specific recombinases. Integrase proteins such as INT(lambda), FLP, and XERC/D that promote site-specific recombination use characteristic, conserved amino acid residues to catalyze the cleavage and ligation of DNA substrates during recombination. The reaction proceeds by a two-step transesterification reaction requiring the formation of a covalent protein-DNA intermediate. Different requirements for homology between recombining DNA sites during integrase-mediated site-specific recombination and Tn916 transposition suggest that INT(Tn916) may use a reaction mechanism different from that used by other integrase recombinases. We show that purified INT(Tn916) mediates specific cleavage of duplex DNA substrates containing the Tn916 transposon ends and adjacent bacterial sequences. Staggered cleavages occur at both ends of the transposon, resulting in 5' hydroxyl protruding ends containing coupling sequences. These are sequences that are transferred with the transposon from donor to recipient during conjugative transposition. The nature of the cleavage products suggests that a covalent protein-DNA linkage occurs via a residue of INT(Tn916) and the 3'-phosphate group of the DNA. INT(Tn916) alone is capable of executing the strand cleavage step required for recombination during Tn916 transposition, and this reaction probably occurs by a mechanism similar to that of other integrase family site-specific recombinases.     

Tn7 transposition in vitro proceeds through an excised transposon intermediate generated by staggered breaks in DNA.

We have developed a cell-free system in which the bacterial transposon Tn7 inserts at high frequency into its preferred target site in the Escherichia coli chromosome, attTn7; Tn7 transposition in vitro requires ATP and Tn7-encoded proteins. Tn7 transposes via a cut and paste mechanism in which the element is excised from the donor DNA by staggered double-strand breaks and then inserted into attTn7 by the joining of 3' transposon ends to 5' target ends. Neither recombination intermediates nor products are observed in the absence of any protein component or DNA substrate. Thus, we suggest that Tn7 transposition occurs in a nucleoprotein complex containing several proteins and the substrate DNAs and that recognition of attTn7 within this complex provokes strand cleavages at the Tn7 ends.     

Playing second fiddle: second-strand processing and liberation of transposable elements from donor DNA

Retroviruses and many transposons of both prokaryotes and eukaryotes share similar chemical reactions in their transposition. Some elements remain attached to donor DNA during transposition and their translocation results in a fusion between target and donor replicons. However, many elements are separated from their flanking donor DNA prior to their insertion into a target site, which requires processing of both strands at both ends of the element. A variety of strategies have been adopted for cleavage of the second, complementary strand to liberate the transposon.     

Hairpin formation in Tn5 transposition

The initial chemical steps in Tn5 transposition result in blunt end cleavage of the transposon from the donor DNA. We demonstrate that this cleavage occurs via a hairpin intermediate. The first step is a 3' hydrolytic nick by transposase. The free 3'OH then attacks the phosphodiester bond on the opposite strand, forming a hairpin at the transposon end. In addition to forming precise hairpins, Tn5 transposase can form imprecise hairpins. This is the first example of imprecise hairpin formation on transposon end DNA. To undergo strand transfer, the hairpin must to be resolved by a transposase-catalyzed hydrolytic cleavage. We show that both precise and imprecise hairpins are opened by transposase. A transposition mechanism utilizing a hairpin intermediate allows a single transposase active site to cleave both 3' and 5' strands without massive protein/DNA rearrangements.     

Kinetic and structural analysis of a cleaved donor intermediate and a strand transfer intermediate in Tn10 transposition.

Tn10 transposes by a nonreplicative "cut and paste" mechanism. We describe here two protein-DNA complexes that are reaction intermediates in the Tn10 transposition process: a cleaved donor complex whose DNA component consists of transposon sequences cleanly excised from flanking donor DNA, and a strand transfer complex whose DNA component contains transposon termini specifically joined to a target site. The kinetic behavior of the first species suggests that it is an early intermediate in the transposition reaction. These two Tn10 complexes are closely analogous to complexes identified in the pathway for replicative "cointegrate" formation by bacteriophage Mu and thus represent intermediates that may be common to both nonreplicative and replicative transposition. These and other results suggest that the Tn10 and Mu reactions are fundamentally very similar despite their very different biological outcomes. The critical difference between the two reactions is the fate of the DNA strand that is not joined to target DNA.     

Tn 10 transposition in vivo: temporal separation of cleavages at the two transposon ends and roles of terminal basepairs subsequent to interaction of ends.

During Tn10 transposition, the transposon is fully excised from the donor site by double strand cleavages at the two ends of the element prior to integration at a new target site. Results presented here demonstrate that an interaction between the two transposon ends is required for double strand cleavage at either end. Furthermore, despite this essential interaction of ends, subsequent cleavages at the two ends can occur at observably distinct times prior to occurrence of strand transfer at either end. Moreover, the time between cleavages at the two ends is exaggerated by the presence of an appropriate mutation at one end of the element. Biological rationales for this constellation of mechanistic features are suggested. Additional results demonstrate that mutations at the three terminal basepairs of Tn10 confer defects subsequent to interaction of ends, in confirmation of inferences from genetic analysis. More specifically, mutations in bp 1-3 confer strong defects during conversion of the full excision intermediate to a complete strand transfer product; mutations in bp 1 and 2 also confer more subtle defects subsequent to interaction of ends but prior to full excision. Such defects might reflect roles for these basepairs in the chemical steps of transposition per se, the positioning of terminal residues for those chemical steps, and/or the coupling of cleavage(s) to subsequent conformational changes.     

Tn10 transpososome assembly involves a folded intermediate that must be unfolded for target capture and strand transfer

Tn10 transposition, like all transposition reactions examined thus far, involves assembly of a stable protein-DNA transpososome, containing a pair of transposon ends, within which all chemical events occur. We report here that stable Tn10 pre-cleavage transpososomes occur in two conformations: a folded form which contains the DNA-bending factor IHF and an unfolded form which lacks IHF. Functional analysis shows that both forms undergo double strand cleavage at the transposon ends but that only the unfolded form is competent for target capture (and thus for strand transfer to target DNA). Additional studies reveal that formation of any type of stable transpososome, folded or unfolded, requires not only IHF but also non-specific transposase-DNA contacts immediately internal to the IHF-binding site, implying the occurrence of a topo- logically closed loop at the transposon end. Overall, transpososome assembly must proceed via a folded intermediate which, however, must be unfolded in order for intermolecular transposition to occur. These and other results support key features of a recently proposed model for transpososome assembly and morphogenesis.     

Single active site catalysis of the successive phosphoryl transfer steps by DNA transposases: insights from phosphorothioate stereoselectivity

The transposase family of proteins mediate DNA transposition or retroviral DNA integration via multistep phosphoryl transfer reactions. For Tn10 and phage Mu, a single active site of one transposase protomer catalyzes the successive transposition reaction steps. We examined phosphorothioate stereoselectivity at the scissile position for all four reaction steps catalyzed by the Tn10 transposase. The results suggest that the first three steps required for double-strand cutting at the transposon end proceed as a succession of pseudo-reverse reaction steps while the 3' end of the transposon remains bound to the same side of the active site. However, the mode of substrate binding to the active site changes for the cut transposon 3' end to target DNA strand joining. The phosphorothioate stereoselectivity of the corresponding steps of phage Mu transposition and HIV DNA integration matches that of Tn10 reaction, indicating a common mode of substrate-active site interactions for this class of DNA transposition reactions.     

Asymmetric processing of human immunodeficiency virus type 1 cDNA in vivo: implications for functional end coupling during the chemical steps of DNA transposition

Retroviral integration, like all forms of DNA transposition, proceeds through a series of DNA cutting and joining reactions. During transposition, the 3' ends of linear transposon or donor DNA are joined to the 5' phosphates of a double-stranded cut in target DNA. Single-end transposition must be avoided in vivo because such aberrant DNA products would be unstable and the transposon would therefore risk being lost from the cell. To avoid suicidal single-end integration, transposons link the activity of their transposase protein to the combined functionalities of both donor DNA ends. Although previous work suggested that this critical coupling between transposase activity and DNA ends occurred before the initial hydrolysis step of retroviral integration, work in the related Tn10 and V(D)J recombination systems had shown that end coupling regulated transposase activity after the initial hydrolysis step of DNA transposition. Here, we show that integrase efficiently hydrolyzed just the wild-type end of two different single-end mutants of human immunodeficiency virus type 1 in vivo, which, in contrast to previous results, proves that two functional DNA ends are not required to activate integrase's initial hydrolysis activity. Furthermore, despite containing bound protein at their processed DNA ends, these mutant viruses did not efficiently integrate their singly cleaved wild-type end into target DNA in vitro. By comparing our results to those of related DNA recombination systems, we propose the universal model that end coupling regulates transposase activity after the first chemical step of DNA transposition.     

H-NS mediates the dissociation of a refractory protein-DNA complex during Tn10/IS10 transposition

Tn10/IS10 transposition takes place in the context of a protein-DNA complex called a transpososome. During the reaction, the transpososome undergoes several conformational changes. The host proteins IHF and H-NS, which also are global regulators of gene expression, play important roles in directing these architectural changes. IHF binds tightly to only one of two transposon ends within the transpososome, folding this end into a DNA loop structure. Unfolding this DNA loop is necessary for excising the transposon from flanking donor DNA and preventing integration of the transposon into itself. We show here that efficient DNA loop unfolding relies on the continuity of the flanking donor DNA on the side of the transpososome opposite to the folded transposon end. We also show this same donor DNA is a preferred binding site for H-NS, which promotes opening of the IHF-loop, which is required for productive target interactions. This is counter to the usual mode of H-NS action, which is repressive due to its propensity to coat DNA. The interplay between IHF and H-NS likely serves to couple the rate of transposition to the host cell physiology as both of these proteins are integrated into cellular stress response pathways.     

Promiscuous target interactions in the mariner transposon Himar1

We have previously characterized the early intermediates of mariner transposition. Here we characterize the target interactions that occur later in the reaction. We find that, in contrast to the early transposition intermediates, the strand transfer complex is extremely stable and difficult to disassemble. Transposase is tightly bound to the transposon ends constraining rotation of the DNA at the single strand gaps in the target site flanking the element on either side. We also find that although the cleavage step requires Mg2+ or Mn2+ as cofactor, the strand transfer step is also supported by Ca2+, suggesting that the structure of the active site changes between cleavage and insertion. Finally, we show that, in contrast to the bacterial cut and paste transposons, mariner target interactions are promiscuous and can take place either before or after cleavage of the flanking DNA. This is similar to the behavior of the V(D)J system, which is believed to be derived from an ancestral eukaryotic transposon. We discuss the implications of promiscuous target interactions for promoting local transposition and whether this is an adaptation to facilitate the invasion of a genome following horizontal transfer to a new host species.     

IS10/Tn10 transposition efficiently accommodates diverse transposon end configurations.

Transposon Tn10 and its component insertion sequence IS10 move by non-replicative transposition. We have studied the array of reaction intermediates and products in a high efficiency in vitro IS10/Tn10 transposition reaction. Synapsis of two transposon ends, followed by cleavage and strand transfer, can occur very efficiently irrespective of the relative locations and orientations of the two ends. The two participating ends can occur in inverted or direct orientation on the same molecule or, most importantly, on two different molecules. This behavior contrasts sharply with that of Mu, in which transposition is strongly biased in favor of inverted repeat synapsis. Mechanistically, the absence of discrimination amongst various end configurations implies that the architecture within the IS10/Tn10 synaptic complex is relatively simple, i.e. lacking any significant intertwining of component DNA strands. Biologically these observations are important because they suggest that the IS10 insertion sequence module has considerable flexibility in the types of DNA rearrangements that it can promote. Most importantly, it now seems highly probable that a single non-replicative IS10 element can promote DNA rearrangements usually attributed to replicative transposition, i.e. adjacent deletions and cointegrates, by utilizing transposon ends on two sister chromosomes. Other events which probably also contribute to the diversity of IS10/Tn10-promoted rearrangements are discussed.     

The Bacteroides mobilizable transposon Tn4555 integrates by a site-specific recombination mechanism similar to that of the gram-positive bacterial element Tn916.

The Bacteroides mobilizable transposon Tn4555 is a 12.2-kb molecule that encodes resistance to cefoxitin. Conjugal transposition is hypothesized to occur via a circular intermediate and is stimulated by coresident tetracycline resistance elements and low levels of tetracycline. In this work, the ends of the transposon were identified and found to consist of 12-bp imperfect inverted repeats, with an extra base at one end. In the circular form, the ends were separated by a 6-bp "coupling sequence" which was associated with either the left or the right transposon terminus when the transposon was inserted into the chromosome. Tn4555 does not duplicate its target site upon insertion. Using a conjugation-based transposition assay, we showed that the coupling sequence originated from 6 bases of genomic DNA flanking either side of the transposon prior to excision. Tn4555 preferentially transposed into a 589-bp genomic locus containing a 207-bp direct repeat. Integration occurred before or after the repeated sequence, with one integration site between the two repeats. These observations are consistent with a transposition model based on site-specific recombination. In the bacteriophage lambda model for site-specific recombination, the bacteriophage recombines with the Escherichia coli chromosome via a 7-bp "crossover" region. We propose that the coupling sequence of Tn4555 is analogous in function to the crossover region of lambda but that unlike the situation in lambda, recombination occurs between regions of nonhomologous DNA. This ability to recombine into divergent target sites is also a feature of the gram-positive bacterial transposon Tn916.     

Mechanisms of metal ion action in Tn10 transposition

Tn10/IS10 transposition involves assembly of a synaptic complex (or transpososome) in which two transposon ends are paired, followed by four distinct chemical steps at each transposon end. The chemical steps are dependent on the presence of a suitable divalent metal cation (Me(2+)). Transpososome assembly and structure are also affected by Me(2+). To gain further insight into the mechanisms of Me(2+) action in Tn10/IS10 transposition we have investigated the effects of substituting Mn(2+) for Mg(2+), the physiologic Me(2+), in transposition. We have also investigated the significance of an Me(2+)-assisted conformational change in transpososome structure. We show that Mn(2+) has two previously unrecognized effects on the Tn10 donor cleavage reaction. It accelerates the rates of hairpin formation and hairpin resolution without significantly affecting the rate of the first chemical step, first strand nicking. Mn(2+) also relaxes the specificity of first strand nicking. We also show that Me(2+)-assisted transpososome unfolding coincides with a structural transition in the transposon-donor junction that may be necessary for hairpin formation. Possible mechanisms for these observations are considered.     

Structural role of the flanking DNA in mariner transposon excision

During cut-and-paste mariner/Tc1 transposition, transposon DNA is cut precisely at its junction with flanking DNA, ensuring the transposon is neither shortened nor lengthened with each transposition event. Each transposon end is flanked by a TpA dinucleotide: the signature target site duplication of mariner/Tc1 transposition. To establish the role of this sequence in accurate DNA cleavage, we have determined the crystal structure of a pre-second strand cleavage mariner Mos1 transpososome. The structure reveals the route of an intact DNA strand through the transposase active site before second strand cleavage. The crossed architecture of this pre-second strand cleavage paired-end complex supports our proposal that second strand cleavage occurs in trans. The conserved mariner transposase WVPHEL and YSPDL motifs position the strand for accurate DNA cleavage. Base-specific recognition of the flanking DNA by conserved amino acids is revealed, defining a new role for the WVPHEL motif in mariner transposition and providing a molecular explanation for in vitro mutagenesis data. Comparison of the pre-TS cleavage and post-cleavage Mos1 transpososomes with structures of Prototype Foamy Virus intasomes suggests a binding mode for target DNA prior to Mos1 transposon integration.     

A minimal system for Tn7 transposition: the transposon-encoded proteins TnsA and TnsB can execute DNA breakage and joining reactions that generate circularized Tn7 species

In the presence of ATP and Mg(2+), the bacterial transposon Tn7 translocates via a cut and paste mechanism executed by the transposon-encoded proteins TnsA+TnsB+TnsC+TnsD. We report here that in the presence of Mn(2+), TnsA+TnsB alone can execute the DNA breakage and joining reactions of Tn7 recombination. ATP is not essential in this minimal system, revealing that this cofactor is not directly involved in the chemical steps of recombination. In both the TnsAB and TnsABC+D systems, recombination initiates with double-strand breaks at each transposon end that cut Tn7 away from flanking donor DNA. In the minimal system, breakage occurs predominantly at a single transposon end and the subsequent end-joining reactions are intramolecular, with the exposed 3' termini of a broken transposon end joining near the other end of the Tn7 element in the same donor molecule to form circular transposon species. In contrast, in TnsABC+D recombination, breaks occur at both ends of Tn7 and the two ends join to a target site on a different DNA molecule to form an intermolecular simple insertion. This demonstration of the capacity of TnsAB to execute breakage and joining reactions supports the view that these proteins form the Tn7 transposase.     

Inversion of the phosphate chirality at the target site of Mu DNA strand transfer: evidence for a one-step transesterification mechanism.

Central to transposition of phage Mu are two reactions mediated by the MuA protein. First, MuA introduces single-stranded cuts at the ends of the Mu DNA to generate 3' OH termini. In the subsequent strand-transfer step, the MuA-Mu DNA end complex cuts a target DNA and joins the Mu 3' ends to the 5' ends of the target. DNA containing chiral phosphorothioates was used to demonstrate inversion of the chirality during the course of strand transfer. This result strongly supports a one-step transesterification mechanism in which the 3' OH of the cleaved donor DNA is the attacking nucleophile. Furthermore, this donor 3' OH group was essential for target DNA cleavage. In contrast, during lambda integration the phosphate chirality was retained, as expected for a two-step transesterification involving a covalent protein-DNA intermediate.     

Formation, characterization and partial purification of a Tn5 strand transfer complex

DNA transposition reactions typically involve a strand transfer step wherein the transposon ends are covalently joined by the transposase protein to a short target site. There is very little known about the transposase-DNA interactions that direct this process, and thus our overall understanding of the dynamics of DNA transposition reactions is limited. Tn5 presents an attractive system for defining such interactions because it has been possible to solve the structure of at least one Tn5 transposition intermediate: a transpososome formed with pre-cleaved ends. However, insertion specificity in the Tn5 system is low and this has hampered progress in generating target-containing transpososomes that are homogeneous in structure (i.e. where a single target site is engaged) and therefore suitable for biochemical and structural analysis. We have developed a system where the Tn5 transpososome integrates almost exclusively into a single target site within a short DNA fragment. The key to establishing this high degree of insertion specificity was to use a target DNA with tandem repeats of a previously characterized Tn5 insertion hotspot. The target DNA requirements to form this strand transfer complex are evaluated. In addition, we show that target DNAs missing single phosphate groups at specific positions are better substrates for strand transfer complex formation relative to the corresponding unmodified DNA fragments. Moreover, utilization of missing phosphate substrates can increase the degree of target site selection. A method for concentrating and partially purifying the Tn5 strand transfer complex is described.     

Diversity of Tn4001 Transposition Products: the Flanking IS256 Elements Can Form Tandem Dimers and IS Circles

We show that both flanking IS256 elements carried by transposon Tn4001 are capable of generating head-to-tail tandem copies and free circular forms, implying that both are active. Our results suggest that the tandem structures arise from dimeric copies of the donor or vector plasmid present in the population by a mechanism in which an IS256 belonging to one Tn4001 copy attacks an IS256 end carried by the second Tn4001 copy. The resulting structures carry abutted left (inverted left repeat [IRL]) and right (inverted right repeat [IRR]) IS256 ends. Examination of the junction sequence suggested that it may form a relatively good promoter capable of driving transposase synthesis in Escherichia coli. This behavior resembles that of an increasing number of bacterial insertion sequences which generate integrative junctions as part of the transposition cycle. Sequence analysis of the IRL-IRR junctions demonstrated that attack of one end by the other is largely oriented (IRL attacks IRR). Our experiments also defined the functional tips of IS256 as the tips predicted from sequence alignments, confirming that the terminal 4 bp at each end are indeed different. The appearance of these multiple plasmid and transposon forms indicates that care should be exercised when Tn4001 is used in transposition mutagenesis. This is especially true when it is used with naturally transformable hosts, such as Streptococcus pneumoniae, in which reconstitution of the donor plasmid may select for higher-order multimers.     

Transposase promotes double strand breaks and single strand joints at Tn10 termini in vivo

We present evidence that Tn10 transposase promotes double strand breaks and single strand joints at Tn10 termini in vivo. Plasmids containing a shortened Tn10 element and a transposase overproducer fusion give rise, upon transposase induction, to new DNA species. The most prominent class is a circularized transposon molecule whose structure suggests that it arises from double strand breakage at the two transposon ends followed by covalent joining between the 3' and 5' ends of one of the two strands. We have used formation of the circularized transposon as a physical assay for the interaction between transposase and different mutant and wild-type termini. These experiments show that transposase protein interacts preferentially with the genetically most active termini in a way that suppresses productive interaction with weaker termini present on the same substrate molecule.