Structure and interactions at the viral surface of the envelope protein E1 of Semliki Forest virus

Semliki Forest virus (SFV) is enveloped by a lipid bilayer enclosed within a glycoprotein cage made by glycoproteins E1 and E2. E1 is responsible for inducing membrane fusion, triggered by exposure to the acidic environment of the endosomes. Acidic pH induces E1/E2 dissociation, allowing E1 to interact with the target membrane, and, at the same time, to rearrange into E1 homotrimers that drive the membrane fusion reaction. We previously reported a preliminary Calpha trace of the monomeric E1 glycoprotein ectodomain and its organization on the virus particle. We also reported the 3.3 A structure of the trimeric, fusogenic conformation of E1. Here, we report the crystal structure of monomeric E1 refined to 3 A resolution and describe the amino acids involved in contacts in the virion. These results identify the major determinants for the E1/E2 icosahedral shell formation and open the way to rational mutagenesis approaches to shed light on SFV assembly.     

Locations of carbohydrate sites on alphavirus glycoproteins show that E1 forms an icosahedral scaffold

There are 80 spikes on the surface of Sindbis virus arranged as an icosahedral surface lattice. Each spike consists of three copies of each of the glycoproteins E1 and E2. There are two glycosylation sites on E1 and two on E2. These four sites have been located by removal of the glycosylation recognition motifs using site-specific mutagenesis, followed by cryoelectron microscopy. The positions of these sites have demonstrated that E2 forms the protruding spikes and that E1 must be long and narrow, lying flat on the viral surface, forming an icosahedral scaffold analogous to the arrangement of the E glycoprotein in flaviviruses. This arrangement of E1 leads to both dimeric and trimeric intermolecular contacts, consistent with the observed structural changes that occur on fusion with host cell membranes, suggesting a similar fusion mechanism for alpha- and flaviviruses.     

Molecular organization of a recombinant subviral particle from tick-borne encephalitis virus.

The tick-borne encephalitis (TBE) flavivirus contains two transmembrane proteins, E and M. Coexpression of E and the M precursor (prM) leads to secretion of recombinant subviral particles (RSPs). In the most common form of these RSPs, analyzed at a 19 A resolution by cryo-electron microscopy (cryo-EM), 60 copies of E pack as dimers in a T = 1 icosahedral surface lattice (outer diameter, 315 A). Fitting the high-resolution structure of a soluble E fragment into the RSP density defines interaction sites between E dimers, positions M relative to E, and allows assignment of transmembrane regions of E and M. Lateral interactions among the glycoproteins stabilize this capsidless particle; similar interactions probably contribute to assembly of virions. The structure suggests a picture for trimer association under fusion-inducing conditions.     

Placement of the structural proteins in Sindbis virus

The structure of the lipid-enveloped Sindbis virus has been determined by fitting atomic resolution crystallographic structures of component proteins into an 11-A resolution cryoelectron microscopy map. The virus has T=4 quasisymmetry elements that are accurately maintained between the external glycoproteins, the transmembrane helical region, and the internal nucleocapsid core. The crystal structure of the E1 glycoprotein was fitted into the cryoelectron microscopy density, in part by using the known carbohydrate positions as restraints. A difference map showed that the E2 glycoprotein was shaped similarly to E1, suggesting a possible common evolutionary origin for these two glycoproteins. The structure shows that the E2 glycoprotein would have to move away from the center of the trimeric spike in order to expose enough viral membrane surface to permit fusion with the cellular membrane during the initial stages of host infection. The well-resolved E1-E2 transmembrane regions form alpha-helical coiled coils that were consistent with T=4 symmetry. The known structure of the capsid protein was fitted into the density corresponding to the nucleocapsid, revising the structure published earlier.     

Structural analysis of viral nucleocapsids by subtraction of partial projections

The nucleocapsid of flavivirus particles does not have a recognizable capsid structure when using icosahedral averaging for cryo-electron microscopy structure determinations. The apparent absence of a definitive capsid structure could be due to a lack of synchronization of the symmetry elements of the external glycoprotein layer with those of the core or because the nucleocapsid does not have the same structure within each particle. A technique has been developed to determine the structure of the capsid, and possibly also of the genome, for icosahedral viruses, such as flaviviruses, using cryo-electron microscopy. The method is applicable not only to the analyses of viral cores, but also to the missing structure of multi-component complexes due to symmetry mismatches. The density contributed by external glycoprotein and membrane layers, derived from previously determined three-dimensional icosahedrally averaged reconstructions, was subtracted from the raw images of the virus particles. The resultant difference images were then used for a three-dimensional reconstruction. After appropriate test data sets were constructed and tested, the procedure was applied to examine the nucleocapsids of flaviviruses, which showed that there is no distinct protein density surrounding the genome. Furthermore, there was no evidence of any icosahedral symmetry within the nucleocapsid core.     

Three-dimensional structure of the inner core of rice dwarf virus

Rice dwarf virus (RDV) is a double-shelled icosahedral virus.Using electron cryomicroscopy and computer reconstruction techniques, we have determined a 3.3 nm resolution three-dimensional (3D) structure of the inner shell capsid without the outer shell and viral RNA. The results show that the inner shell is a thin, densely packed, smooth structure, which provides a scaffold for the full virus. A total of 120 copies of the major inner shell capsid protein P3 forms 60 dimers arranged in a T=1 icosahedral lattice. A close examination on the subunit packing of the T=1 inner core P3 with that of the T=13l outer shell P8 indicated that P8 trimers connect with P3 through completely non-equivalent, yet highly specific, intermolecular interactions.     

Three-dimensional structure of the inner core of rice dwarf virus

Rice dwarf virus (RDV) is a double-shelled icosahedral virus. Using electron cryomicro-scopy and computer reconstruction techniques, we have determined a 3.3 nm resolution three-dimensional (3D) structure of the inner shell capsid without the outer shell and viral RNA. The results show that the inner shell is a thin, densely packed, smooth structure, which provides a scaffold for the full virus. A total of 120 copies of the major inner shell capsid protein P3 forms 60 dimers arranged in a T=1 icosahedral lattice. A close examination on the subunit packing of the T=1 inner core P3 with that of the T=13/ outer shell P8 indicated that P8 trimers connect with P3 through completely non-equivalent, yet highly specific, intermolecular interactions.     

The surface conformation of Sindbis virus glycoproteins E1 and E2 at neutral and low pH, as determined by mass spectrometry-based mapping

Sindbis virus contains two membrane glycoproteins, E1 and E2, which are organized into 80 trimers of heterodimers (spikes). These trimers form a precise T=4 icosahedral protein lattice on the surface of the virus. Very little is known about the organization of the E1 and E2 glycoproteins within the spike trimer. To gain a better understanding of how the proteins E1 and E2 are arranged in the virus membrane, we have used the techniques of limited proteolysis and amino acid chemical modification in combination with mass spectrometry. We have determined that at neutral pH the E1 protein regions that are accessible to proteases include domains 1-21 (region encompassing amino acids 1 to 21), 161-176, and 212-220, while the E2 regions that are accessible include domains 31-84, 134-148, 158-186, 231-260, 299-314, and 324-337. When Sindbis virus is exposed to low pH, E2 amino acid domains 99-102 and 262-309 became exposed while other domains became inaccessible. Many new E1 regions became accessible after exposure to low pH, including region 86-91, which is in the putative fusion domain of E1 of Semliki Forest virus (SFV) (M. C. Kielian et al., J. Cell Biol. 134:863-872, 1996). E1 273-287 and region 145-158 were also exposed at low pH. These data support a model for the structure of the alphavirus spike in which the E1 glycoproteins are centrally located as trimers which are surrounded and protected by the E2 glycoprotein. These data improve our understanding of the structure of the virus membrane and have implications for understanding the protein conformational changes which accompany the process of virus-cell membrane fusion.     

Acid-induced movements in the glycoprotein shell of an alphavirus turn the spikes into membrane fusion mode

In the icosahedral (T = 4) Semliki Forest virus, the envelope protomers, i.e. E1-E2 heterodimers, make one-to-one interactions with capsid proteins below the viral lipid bilayer, transverse the membrane and form an external glycoprotein shell with projections. The shell is organized by protomer domains interacting as hexamers and pentamers around shell openings at icosahedral 2- and 5-fold axes, respectively, and the projections by other domains associating as trimers at 3- and quasi 3-fold axes. We show here, using cryo- electron microscopy, that low pH, as occurs in the endosomes during virus uptake, results in the relaxation of protomer interactions around the 2- and the 5-fold axes in the shell, and movement of protomers towards 3- and quasi 3-fold axes in a way that reciprocally relocates their putative E1 and E2 domains. This seemed to be facilitated by a trimerization of transmembrane segments at the same axes. The alterations observed help to explain several key features of the spike-mediated membrane fusion reaction, including shell dissolution, heterodimer dissociation, fusion peptide exposure and E1 homotrimerization.     

The cytoplasmic tail of NSP4, the endoplasmic reticulum-localized non-structural glycoprotein of rotavirus, contains distinct virus binding and coiled coil domains.

The final steps in the assembly of rotavirus occur in the lumen of the endoplasmic reticulum (ER). Targeting of the immature inner capsid particle (ICP) to this compartment is mediated by the cytoplasmic tail of NSP4, a non-structural virus glycoprotein located in the ER membrane. To delineate structural and functional features of NSP4, soluble fragments of the cytoplasmic tail have been expressed and purified. Our analysis combines a functional assay for ICP binding with biochemical and CD spectroscopic studies to examine the secondary and quaternary structure. The ICP-binding domain is located within the C-terminal 20 amino acids of the polypeptide. A second region, distinct from this receptor domain, adopts an alpha-helical coiled coil structure and mediates the oligomerization of the virus binding domains into a homotetramer. The domain organization of the cytoplasmic fragments of NSP4 suggests a novel structure for an icosahedral virus receptor protein in which C-terminal binding sites for immature rotavirus particles are connected to an alpha-helical coiled coil stalk which projects from the ER membrane.     

Disulfide bridge-mediated folding of Sindbis virus glycoproteins.

The Sindbis virus envelope is composed of 80 E1-E2 (envelope glycoprotein) heterotrimers organized into an icosahedral protein lattice with T=4 symmetry. The structural integrity of the envelope protein lattice is maintained by E1-E1 interactions which are stabilized by intramolecular disulfide bonds. Structural domains of the envelope proteins sustain the envelope's icosahedral lattice, while functional domains are responsible for virus attachment and membrane fusion. We have previously shown that within the mature Sindbis virus particle, the structural domains of the envelope proteins are significantly more resistant to the membrane-permeative, sulfhydryl-reducing agent dithiothreitol (DTT) than are the functional domains (R. P. Anthony, A. M. Paredes, and D. T. Brown, Virology 190:330-336, 1992). We have used DTT to probe the accessibility of intramolecular disulfides within PE2 (the precursor to E2) and E1, as these proteins fold and are assembled into the spike heterotrimer. We have determined through pulse-chase analysis that intramolecular disulfide bonds within PE2 are always sensitive to DTT when the glycoproteins are in the endoplasmic reticulum. The reduction of these disulfides results in the disruption of PE2-E1 associations. E1 acquires increased resistance to DTT as it folds through a series of disulfide intermediates (E1alpha, -beta, and -gamma) prior to assuming its native and most compact conformation (E1epsilon). The transition from a DTT-sensitive form into a form which exhibits increased resistance to DTT occurs after E1 has folded into its E1beta conformation and correlates temporally with the dissociation of BiP-E1 complexes and the formation of PE2-E1 heterotrimers. We propose that the disulfide bonds within E1 which stabilize the protein domains required for maintaining the structural integrity of the envelope protein lattice form early within the folding pathway of E1 and become inaccessible to DTT once the heterotrimer has formed.     

The PM2 virion has a novel organization with an internal membrane and pentameric receptor binding spikes

Biological membranes are notoriously resistant to structural analysis. Excellent candidates to tackle this problem in situ are membrane-containing viruses where the membrane is constrained by an icosahedral capsid. Cryo-EM and image reconstruction of bacteriophage PM2 revealed a membrane bilayer following the internal surface of the capsid. The viral genome closely interacts with the inner leaflet. The capsid, at a resolution of 8.4 A, reveals 200 trimeric capsomers with a pseudo T = 21 dextro organization. Pentameric receptor-binding spikes protrude from the surface. It is evident from the structure that the PM2 membrane has at least two important roles in the life cycle. First, it acts as a scaffold to nucleate capsid assembly. Second, after host recognition, it fuses with the host outer membrane to promote genome entry. The structure also sheds light on how the viral supercoiled circular double-stranded DNA genome might be packaged and released.     

Structure and stability of icosahedral particles of a covalent coat protein dimer of bacteriophage MS2

Particles formed by the bacteriophage MS2 coat protein mutants with insertions in their surface loops induce a strong immune response against the inserted epitopes. The covalent dimers created by fusion of two copies of the coat protein gene are more tolerant to various insertions into the surface loops than the single subunits. We determined a 4.7‐Å resolution crystal structure of an icosahedral particle assembled from covalent dimers and compared its stability with wild‐type virions. The structure resembled the wild‐type virion except for the intersubunit linker regions. The covalent dimer orientation was random with respect to both icosahedral twofold and quasi‐twofold symmetry axes. A fraction of the particles was unstable in phosphate buffer because of assembly defects. Our results provide a structural background for design of modified covalent coat protein dimer subunits for use in immunization.     

The Mechanism of Henipavirus Fusion： Examining the Relationships between the Attachment and Fusion Glycoproteins

The henipaviruses, represented by Nipah virus and Hendra virus, are emerging zoonotic viral pathogens responsible for repeated outbreaks associated with high morbidity and mortality in Australia, Southeast Asia, India and Bangladesh. These viruses enter host cells via a class I viral fusion mechanism mediated by their attachment and fusion envelope glycoproteins; efficient membrane fusion requires both these glycoproteins in conjunction with specific virus receptors present on susceptible host cells. The henipavirus attachment glycoprotein interacts with a cellular B class ephrin protein receptor triggering conformational alterations leading to the activation of the viral fusion (F) glycoprotein. The analysis of monoclonal antibody (mAb) reactivity with G has revealed measurable alterations in the antigenic structure of the glycoprotein following its binding interaction with receptor. These observations only appear to occur with full-length native G glycoprotein, which is a tetrameric oligomer, and not with soluble forms of G (sG), which are disulfide-linked dimers. Single amino acid mutations in a heptad repeat-like structure within the stalk domain of G can disrupt its association with F and subsequent membrane fusion promotion activity. Notably, these mutants of G also appear to confer a postreceptor bound conformation implicating the stalk domain as an important element in the G glycoprotein's structure and functional relationship with F. Together, these observations suggest fusion is dependent on a specific interaction between the F and G glycoproteins of the henipaviruses. Further, receptor binding induces measurable changes in the G glycoprotein that appear to be greatest in respect to the interactions between the pairs of dimers comprising its native tetrameric structure. These receptor-induced conformational changes may be associated with the G glycoprotein's promotion of the fusion activity of F.     

Membrane remodeling by the double-barrel scaffolding protein of poxvirus

In contrast to most enveloped viruses, poxviruses produce infectious particles that do not acquire their internal lipid membrane by budding through cellular compartments. Instead, poxvirus immature particles are generated from atypical crescent-shaped precursors whose architecture and composition remain contentious. Here we describe the 2.6 Å crystal structure of vaccinia virus D13, a key structural component of the outer scaffold of viral crescents. D13 folds into two jellyrolls decorated by a head domain of novel fold. It assembles into trimers that are homologous to the double-barrel capsid proteins of adenovirus and lipid-containing icosahedral viruses. We show that, when tethered onto artificial membranes, D13 forms a honeycomb lattice and assembly products structurally similar to the viral crescents and immature particles. The architecture of the D13 honeycomb lattice and the lipid-remodeling abilities of D13 support a model of assembly that exhibits similarities with the giant mimivirus. Overall, these findings establish that the first committed step of poxvirus morphogenesis utilizes an ancestral lipid-remodeling strategy common to icosahedral DNA viruses infecting all kingdoms of life. Furthermore, D13 is the target of rifampicin and its structure will aid the development of poxvirus assembly inhibitors.     

Rotavirus proteins VP7, NS28, and VP4 form oligomeric structures.

Sucrose gradient sedimentation analysis of rotavirus SA11-infected Ma104 cells revealed the presence of oligomers of VP7, the structural glycoprotein, and NS28, the nonstructural glycoprotein. Cross-linking the proteins, either before or after sucrose gradient centrifugation, stabilizes oligomers, which can be analyzed by nonreducing sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) after immunoprecipitation. The major NS28 oligomer was tetrameric, though dimers and higher-order structures were observed as well. VP7 formed predominantly dimers, and again tetramers and higher oligomeric forms were present. Each oligomer of VP7 and NS28 sedimented at the same characteristic rate through the sucrose gradient either in the presence or absence of cross-linking. Monomers could not be cross-linked to form oligomers, demonstrating that cross-linked oligomers were not artifactually derived from monomers. Reversing the cross-linking of immunoprecipitated VP7 on reducing SDS-PAGE resulted in the appearance of only the monomeric form of VP7. Dissociation of the NS28 oligomers resulted in stable dimers as well an monomers. In the faster-sedimenting fractions, a 16S to 20S complex, which contained the rotavirus outer shell proteins VP7 and VP4 cross-linked to NS28, was observed. These complexes were shown not to be associated with any known subviral particle. The association of VP4, NS28, and VP7 may represent sites on the endoplasmic reticulum membrane that participate in the budding of the single-shelled particles into the lumen of the endoplasmic reticulum, where maturation to double-shelled particles occurs.     

Visualization of the target-membrane-inserted fusion protein of Semliki Forest virus by combined electron microscopy and crystallography

Semliki Forest virus enters cells by receptor-mediated endocytosis. The acidic environment of the endosome triggers a membrane fusion reaction that is mediated by the E1 glycoprotein. During fusion, E1 rearranges from an E1/E2 heterodimer to a highly stable, membrane-inserted E1 homotrimer (E1HT). In this study, we analyzed E1HT by a combination of electron cryomicroscopy, electron crystallography of negatively stained 2D crystals, and fitting of the available X-ray structure of the monomeric E1 ectodomain into the resulting 3D reconstruction. The visualized E1HT reveals that the ectodomain has reoriented vertically and inserted the distal tip of domain II into the lipid bilayer. Our data allow the visualization of a viral fusion protein inserted in its target membrane and demonstrate that insertion is a cooperative process, resulting in rings composed of five to six homotrimers.     

Biochemical characterization of nuclear pore complex protein gp210 oligomers.

The membrane-spanning glycoprotein gp210 is a major component of the nuclear pore complex. This nucleoporin contains a large cisternal N-terminal domain, a short C-terminal cytoplasmic tail, and a single transmembrane segment. We show here that dimers of native gp210 can be isolated from cell extracts by immunoprecipitation, and from purified rat liver nuclear envelopes by velocity sedimentation and gel filtration. Cross-linking of proteins in isolated membranes prior to solubilization dramatically increases the proportion of dimers. The dimers are SDS-resistant, as previously observed for some integral membrane proteins of cis-Golgi and plasma membrane proteins, including glycophorin A. Larger oligomers of gp210 can also be obtained by gel filtration and denaturing electrophoresis, but unlike the dimers are dissociated by reduction and heating in the presence of SDS. We propose that gp210 is organized into the pore membrane as a large array of gp210 dimers that may constitute a luminal submembranous protein skeleton.     

Exposure of the HIV-1 broadly neutralizing antibody 10E8 MPER epitope on the membrane surface by gp41 transmembrane domain scaffolds

The 10E8 antibody achieves near-pan neutralization of HIV-1 by targeting the remarkably conserved gp41 membrane-proximal external region (MPER) and the connected transmembrane domain (TMD) of the HIV-1 envelope glycoprotein (Env). Thus, recreating the structure that generates 10E8-like antibodies is a major goal of the rational design of anti-HIV vaccines. Unfortunately, high-resolution information of this segment in the native Env is lacking, limiting our understanding of the behavior of the crucial 10E8 epitope residues.In this report, two sequences, namely, MPER-TMD1 (gp41 residues 671–700) and MPER-TMD2 (gp41 residues 671–709) were compared both experimentally and computationally, to assess the TMD as a potential membrane integral scaffold for the 10E8 epitope. These sequences were selected to represent a minimal (MPER-TMD1) or full-length (MPER-TMD2) TMD membrane anchor according to mutagenesis results reported by Yue et al. (2009) J. Virol. 83, 11,588. Immunochemical assays revealed that MPER-TMD1, but not MPER-TMD2, effectively exposed the MPER C-terminal stretch, harboring the 10E8 epitope on the surface of phospholipid bilayers containing a cholesterol concentration equivalent to that of the viral envelope. Molecular dynamics simulations, using the recently resolved TMD trimer structure combined with the MPER in a cholesterol-enriched model membrane confirmed these results and provided an atomistic mechanism of epitope exposure which revealed that TMD truncation at position A700 combined with N-terminal addition of lysine residues positively impacts epitope exposure. Overall, these results provide crucial insights into the design of effective MPER-TMD derived immunogens.     

Disulfide bonding controls the processing of retroviral envelope glycoproteins.

The mitogenic membrane glycoprotein (gp55) encoded by Friend erythroleukemia virus is inefficiently processed from the rough endoplasmic reticulum (RER) and only 3-5% reaches plasma membranes. Because this processed component (gp55P) contains larger and more complex oligosaccharides, it can be separated from RER gp55. In nonreducing conditions, gp55P is a unique disulfide-bonded dimer, whereas RER gp55 consists of monomers and dimers with diverse intrachain and interchain disulfide bonds. This suggests that gp55 folds heterogeneously and that only one homodimer is competent for export from the RER. Pulse-chase analyses of gp55 components labeled with radioactive amino acids indicated that formation of diverse disulfide-bonded components occurred within minutes of polypeptide synthesis and that malfolded components did not later isomerize to generate dimers competent for export from the RER. Chemical studies suggested that all 12 cysteines of gp55 were oxidized within 5 min after synthesis of the protein. In contrast, the envelope glycoprotein precursor (gPr90) encoded by a replication-competent murine leukemia virus folds more homogeneously, and it is then processed and cleaved to form an extracellular glycoprotein gp70 plus a transmembrane protein p15E. The fully processed glycoprotein contains an unoxidized cysteine sulfhydryl that isomerizes reversibly with a disulfide bond that links gp70 to p15E. Consequently, only a proportion of gp70 and p15E is disulfide-bonded, and dissociation occurs when the environment becomes even slightly reducing. The gp55 glycoprotein appears to be an extreme example of protein malfolding associated with imprecise and irreversible disulfide bonding. We discuss evidence that folding inefficiencies are common for retroviral proteins that have newly evolving pathogenic functions.