Nonlinear dynamics of drift structures in a magnetized dissipative plasma

A study is made of the nonlinear dynamics of solitary vortex structures in an inhomogeneous magnetized dissipative plasma. A nonlinear transport equation for long-wavelength drift wave structures is derived with allowance for the nonuniformity of the plasma density and temperature equilibria, as well as the magnetic and collisional viscosity of the medium and its friction. The dynamic equation describes two types of nonlinearity: scalar (due to the temperature inhomogeneity) and vector (due to the convectively polarized motion of the particles of the medium). The equation is fourth order in the spatial derivatives, in contrast to the second-order Hasegawa-Mima equations. An analytic steady solution to the nonlinear equation is obtained that describes a new type of solitary dipole vortex. The nonlinear dynamic equation is integrated numerically. A new algorithm and a new finite difference scheme for solving the equation are proposed, and it is proved that the solution so obtained is unique. The equation is used to investigate how the initially steady dipole vortex constructed here behaves unsteadily under the action of the factors just mentioned. Numerical simulations revealed that the role of the vector nonlinearity is twofold: it helps the dispersion or the scalar nonlinearity (depending on their magnitude) to ensure the mutual equilibrium and, thereby, promote self-organization of the vortical structures. It is shown that dispersion breaks the initial dipole vortex into a set of tightly packed, smaller scale, less intense monopole vortices-alternating cyclones and anticyclones. When the dispersion of the evolving initial dipole vortex is weak, the scalar nonlinearity symmetrically breaks a cyclone-anticyclone pair into a cyclone and an anticyclone, which are independent of one another and have essentially the same intensity, shape, and size. The stronger the dispersion, the more anisotropic the process whereby the structures break: the anticyclone is more intense and localized, while the cyclone is less intense and has a larger size. In the course of further evolution, the cyclone persists for a relatively longer time, while the anticyclone breaks into small-scale vortices and dissipation hastens this process. It is found that the relaxation of the vortex by viscous dissipation differs in character from that by the frictional force. The time scale on which the vortex is damped depends strongly on its typical size: larger scale vortices are longer lived structures. It is shown that, as the instability develops, the initial vortex is amplified and the lifetime of the dipole pair components-cyclone and anticyclone-becomes longer. As time elapses, small-scale noise is generated in the system, and the spatial structure of the perturbation potential becomes irregular. The pattern of interaction of solitary vortex structures among themselves and with the medium shows that they can take part in strong drift turbulence and anomalous transport of heat and matter in an inhomogeneous magnetized plasma.     

Experimental study of electron vortex structures in an electrostatic plasma lens

Results are presented from experimental studies of electron vortex bunches in a cold ion-beam plasma consisting of strongly magnetized electrons and a beam of almost free positive ions. The existence of electron vortex bunches was detected from local minima of the electric potential on surfaces perpendicular to the magnetic field lines. It is found that the vortices have the form of magnetic-field-aligned filaments, in which electrons rotate with a velocity significantly exceeding both the velocity of the vortex as a whole and the electron velocity in the ambient plasma. It is shown that, in a sufficiently strong magnetic field, the accumulation of electrons in the vortices terminates when the condition for the longitudinal confinement of electrons by the electric field fails to hold.     

Separation of the heavy and light ion components in a plasma flow propagating in a curvilinear magnetic field

The propagation of a metal plasma jet in a transport system with a curvilinear magnetic field was studied experimentally. The jet was generated by a pulsed vacuum arc discharge with a composite (W + Fe) cathode. Spatial separation of ions of the cathode material was observed at the exit from the system. The ions of the lighter element (Fe) were concentrated in the inner part of the cathode plasma jet deflected by the magnetic field. The jet is also found to be deflected along the binormal to the magnetic field lines due to plasma drift in the crossed magnetic and electric fields. The degree of mass separation of elements is shown to increase with increasing jet deflection along the binormal. The maximum value of the mass separation efficiency reaches 45, the effective value being 7.7.     

Electrostatic electron vortex structure in a plasma in an external magnetic field

A previously developed method for describing vortex structures is used to construct electrostatic vortices in a plasma in an external magnetic field. An equation for the radial electric field that gives rise to azimuthal electron drift in crossed electric (E _r ) and magnetic (B _z ) fields is derived without allowance for the magnetic field of the electron currents. Two types of the resulting electrostatic vortex structures with a positive and a negative electric potential at the axis are analyzed. The results obtained are compared with experimental data on vortex structures.     

Shear-layer detection in poststenotic flow by spectrum analysis of Doppler signals

Spectrum analysis of the Doppler signals was performed 0.5 tube diameters downstream from an axisymmetric constriction with an area reduction of 80 percent in steady flow at a jet Reynolds number of 2840. Both pulsed and continuous wave (CW) Doppler spectra showed significant reverse flow components in the separated flow. The pulsed Doppler spectra exhibited sudden changes when the sample volume crossed the shear layer between the center jet and the separated flow. A power spectrum equation was theoretically derived from continuity of flow to define the Doppler shift frequency for the shear layer velocity. The CW Doppler spectrum showed a minimum spectrum density at a frequency which equalled the shear layer Doppler shift frequency derived from the equation. The pulsed spectra exhibited the sudden changes at the same frequency as well.     

Vortex Formation with a Snapping Shrimp Claw

Snapping shrimp use one oversized claw to generate a cavitating high speed water jet for hunting, defence and communication. This work is an experimental investigation about the jet generation. Snapping shrimp (Alpheus-bellulus) were investigated by using an enlarged transparent model reproducing the closure of the snapper claw. Flow inside the model was studied using both High-Speed Particle Image Velocimetry (HS-PIV) and flow visualization. During claw closure a channel-like cavity was formed between the plunger and the socket featuring a nozzle-type contour at the orifice. Closing the mechanism led to the formation of a leading vortex ring with a dimensionless formation number of approximate ΔT*≈4. This indicates that the claw might work at maximum efficiency, i.e. maximum vortex strength was achieved by a minimum of fluid volume ejected. The subsequent vortex cavitation with the formation of an axial reentrant jet is a reasonable explanation for the large penetration depth of the water jet. That snapping shrimp can reach with their claw-induced flow. Within such a cavitation process, an axial reentrant jet is generated in the hollow cylindrical core of the cavitated vortex that pushes the front further downstream and whose length can exceed the initial jet penetration depth by several times.     

Specific Features of the Longitudinal Distribution of Plasma Parameters in the Initial Segment of a Supersonic Jet Formed by a Pulsed Capillary Discharge

Plasma Physics Reports - The paper presents the results of spectroscopic studies of the initial segment of a supersonic plasma jet formed by a pulsed discharge in a capillary made of...     

Specific features of the radial distributions of plasma parameters in the initial segment of a supersonic jet generated by a pulsed capillary discharge

Results are presented from spectroscopic studies of the initial segment of a supersonic plasma jet generated by a pulsed capillary discharge with an ablative carbon-containing polymer wall. Specific features of the spatial distributions of the electron density and intensities of spectral components caused, in particular, by the high electron temperature in the central zone, much exceeding the normal temperature, as well as by the high nonisobaricity of the initial segment of the supersonic jet, are revealed. Measurements of the radiative properties of the hot jet core (the intensity and profile of the H_α and H_β Balmer lines and the relative intensities of C II lines) with high temporal (1–50 μs) and spatial (30–50 μm) resolutions made it possible to determine general features of the pressure and temperature distributions near the central shock. The presence of molecular components exhibiting their emission properties at the periphery of the plasma jet allowed the authors to estimate the parameters of the plasma in the jet region where “detached” shock waves form.     

Dynamics of a vortex filament in a stratified medium

The behavior of a vortex filament in a perfectly conducting stratified medium is analyzed. It is shown that the equation describing oscillations of a straight filament is linear, but becomes substantially non-linear with increasing inclination angle. Effects related to the finite radius of the vortex core are considered, and dispersion relations for linear oscillations of a vortex column are derived.     

Diagnostics of jet structures formed in the plasma corona during the irradiation of porous targets by intense laser pulses

Jet structures formed during laser irradiation of porous targets with an average density of ?? = 1?30 mg/cm³ were studied experimentally by using the diagnostic complex of the Mishen facility. To study complicated plasma structures, the experimental data were processed using specially elaborated mathematical methods. The probability of the emergence of jet plasma structures in plane open-pore triacetate cellulose targets was studied as a function of the parameter ??d, where ?? is the average mass density and d is the target thickness. Analysis of the experimental results and their comparison with the existing data on the jet structures formed during laser irradiation of solid-density targets allowed the authors to reveal the characteristic features and mechanisms of the development of large-scale plasma jets.     

Development of an atmospheric plasma jet device for versatile treatment of electron microscope sample grids

Atmospheric-pressure plasmas have been widely applied for surface modification and biomedical treatment because of their ability to generate highly reactive radicals and charged particles. In negative-stain electron microscopy (Neg-EM) and cryogenic electron microscopy (cryo-EM), plasmas have been used to generate hydrophilic surfaces and eliminate surface contaminants to embed specimens onto grids. In addition, plasma treatment is a prerequisite for negative-stain and Quantifoil grids, whose surfaces are coated with hydrophobic amorphous carbon. Although the conventional glow discharge system has been used successfully in this purpose, there has been no further effort to take an advantage from the recent progress in the plasma field. Here, we developed a nonthermal atmospheric plasma jet system as an alternative tool for treatment of surfaces. The low-temperature plasma is a nonequilibrium system that has been widely used in biomedical area. Unlike conventional glow discharge systems, the plasma jet system successfully cleans and introduces hydrophilicity on the grid surface in the ambient environment without a vacuum. Therefore, we anticipate that the plasma jet system will have numerous benefits, such as convenience and versatility, as well as having potential applications in surface modification for both negative-stain and cryo-EM grid treatment.     

Application of atmospheric pressure nonthermal plasma for the in vitro eradication of bacterial biofilms

The use of atmospheric pressure nonthermal plasma represents an interesting and novel approach for the decontamination of surfaces colonized with microbial biofilms that exhibit enhanced tolerance to antimicrobial challenge. In this study, the influence of an atmospheric pressure nonthermal plasma jet, operated in a helium and oxygen gas mixture under ambient pressure, was evaluated against biofilms of Bacillus cereus, Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa. Within < 4 min of plasma exposure, complete eradication of the two gram-positive bacterial biofilms was achieved. Although gram-negative biofilms required longer treatment time, their complete eradication was still possible with 10 min of exposure. Whilst this study provides useful proof of concept data on the use of atmospheric pressure plasmas for the eradication of bacterial biofilms in vitro, it also demonstrates the critical need for improved understanding of the mechanisms and kinetics related to such a potentially significant approach.     

The role of optimal vortex formation in biological fluid transport

Animal phyla that require macro-scale fluid transport for functioning have repeatedly and often independently converged on the use of jet flows. During flow initiation these jets form fluid vortex rings, which facilitate mass transfer by stationary pumps (e.g. cardiac chambers) and momentum transfer by mobile systems (e.g. jet-propelled swimmers). Previous research has shown that vortex rings generated in the laboratory can be optimized for efficiency or thrust, based on the jet length-to-diameter ratio (L/D), with peak performance occurring at 3.5相似文献   

A formulation for calculating the translational velocity of a vortex ring or pair

Cephalopods, among other marine animals, use jet propulsion for swimming. A simple actuator is designed to loosely mimic pulsatile jet formation in squid and jellyfish. The actuator is comprised of a cavity with an oscillating diaphragm and an exit orifice. Periodic oscillation of the diaphragm results in the formation of an array of vortex rings and eventually could generate a periodic pulsatile jet. A general formulation for calculating the velocity of a steadily translating vortical structure in two-dimensional and axi-symmetric shear flows is presented. This technique is based on taking the variational derivative of an energetic function at its critical point. This technique is general, applicable to vortices in liquid and gas media, with no limitation on the relative size of the vortex core. The technique is then implemented to estimate the translational velocity of a vortex ring in a Helmholtz vortex ring generator.     

Changes in Odour Intermittency Influence the Success and Search Behaviour During Orientation in the Crayfish (Orconectes Rusticus)

Aquatic organisms may use different mechanisms to locate an odour source, including odour-gated rheotaxis and chemotaxis. However, the effects of spatial and temporal information contained within odour signals in guiding orientation are under debate. In nature, turbulence and plume meandering give rise to signal intermittency, which organisms must overcome to locate an odour source successfully. In this study, crayfish were presented with odour plumes formed by a continuously released jet or a pulsed jet ranging from 0.5 to 3 Hz. Crayfish oriented significantly differently in pulsed odour plumes differed significantly from than in a continuously released jet plume. In a continuous odour plumes, crayfish walked faster, had more accurate heading and turning angles, and stopped less often. The results suggest that crayfish are able to orient in a pulsed odour plumes, but that the spatial and temporal complexity of a continuous released odour plume allowed them to be more successful to find the odour source.     

Swimming dynamics and propulsive efficiency of squids throughout ontogeny

Squids encounter vastly different flow regimes throughout ontogeny as they undergo critical morphological changes to their two locomotive systems: the fins and jet. Squid hatchlings (paralarvae) operate at low and intermediate Reynolds numbers (Re) and typically have rounded bodies, small fins, and relatively large funnel apertures, whereas juveniles and adults operate at higher Re and generally have more streamlined bodies, larger fins, and relatively small funnel apertures. These morphological changes and varying flow conditions affect swimming performance in squids. To determine how swimming dynamics and propulsive efficiency change throughout ontogeny, digital particle image velocimetry (DPIV) and kinematic data were collected from an ontogenetic range of long-finned squid Doryteuthis pealeii and brief squid Lolliguncula brevis swimming in a holding chamber or water tunnel (Re = 20-20 000). Jet and fin wake bulk properties were quantified, and propulsive efficiency was computed based on measurements of impulse and excess kinetic energy in the wakes. Paralarvae relied predominantly on a vertically directed, high frequency, low velocity jet as they bobbed up and down in the water column. Although some spherical vortex rings were observed, most paralarval jets consisted of an elongated vortical region of variable length with no clear pinch-off of a vortex ring from the trailing tail component. Compared with paralarvae, juvenile and adult squid exhibited a more diverse range of swimming strategies, involving greater overall locomotive fin reliance and multiple fin and jet wake modes with better defined vortex rings. Despite greater locomotive flexibility, jet propulsive efficiency of juveniles/adults was significantly lower than that of paralarvae, even when juvenile/adults employed their highest efficiency jet mode involving the production of periodic isolated vortex rings with each jet pulse. When the fins were considered together with the jet for several juvenile/adult swimming sequences, overall propulsive efficiency increased, suggesting that fin contributions are important and should not be overlooked in analyses of the swimming performance of squids. The fins produced significant thrust and consistently had higher propulsive efficiency than did the jet. One particularly important area of future study is the determination of coordinated jet/fin wake modes that have the greatest impact on propulsive efficiency. Although such research would be technically challenging, requiring new, powerful, 3D approaches, it is necessary for a more comprehensive assessment of propulsive efficiency of the squid dual-mode locomotive system.     

The pulsed water jet for selective removal of bone cement during revision arthroplasty]

Conventional tools used in prosthetic revision surgery have a limited range of action within the narrow cement mantle. Water jet cutting technology permits tiny and precisely controlled cuts, and may therefore be an alternative method of bone cement removal. Our study compares the cutting performance on bone cement (PMMA) and bone of a pulsed water jet and a continuous water jet. The aim of the study was to establish whether selective removal of PMMA is possible. 55 bone specimens (bovine femora) and 32 specimens of PMMA were cut with a continuous and a pulsed water jet at different pressures (40 MPa, 60 MPa) and pulse frequencies (0Hz, 50Hz, 250Hz). To ensure comparability of the results, the depths of cut were related to the hydraulic power of that part of the jet actually impinging on the material. While for PMMA the power-related depth of cut increased significantly with the pulse frequency, this did not apply to bone. The cuts produced in bone were sharp-edged. Since PMMA is more brittle than bone, the water jet caused cracks that enlarged further until particles of bone broke away. Although selective removal of PMMA without doing damage to the bone was not possible at the investigated settings of the jet parameters, the results do show that a pulsed water jet can cut bone cement much more effectively than bone. This is an important advantage over conventional non-selective tools for the removal of bone cement.     

Vortex dust structures in the track plasma of a proton beam

Results are presented from experimental and theoretical investigations of the behavior of dust grains in a track plasma produced by a beam of accelerated protons. The dynamic ordered dust structures in a proton-beam-produced plasma are obtained for the first time. The processes leading to the formation of such structures are simulated numerically. The experimentally obtained dynamic vortex dust structures in a track plasma of a proton beam are explained theoretically, and the theoretical model developed to describe such a plasma is verified experimentally. Numerical investigations carried out by the method of Brownian dynamics made it possible to qualitatively explain the characteristic features of the formation of vortex dust structures.     

Computational analysis of confined jet flow and mass transport in a blind tube.

A computational analysis of confined nonimpinging jet flow in a blind tube is performed as an initial investigation of the underlying fluid and mass transport mechanics of tracheal gas insufflation. A two-dimensional axisymmetric model of a laminar steady jet flow into a concentric blind-end tube is put forth and the governing continuity, momentum, and convection-diffusion equations are solved with a finite element code. The effects of the jet diameter based Reynolds number (Re(j)), the ratio of the jet-to-outer tube diameters (epsilon), and the Schmidt number (Sc) are evaluated with the determined velocity and contaminant concentration fields. The normalized penetration depth of the jet is found to increase linearly with increasing Re(j) for epsilon = O(0.1). For a given epsilon, a ring vortex that develops is observed to be displaced downstream and radially outward from the jet tip for increasing Re(j). The axial shear stress profile along the inside wall of the outer tube possesses regions of fixed shear stress in addition to a local minimum and maximum in the vicinity of the jet tip. Corresponding regions of axial shear stress gradients exist between the fixed shear stress regions and the local extrema. Contaminant concentration gradients develop across the ring vortex indicating the inward diffusion of contaminant into the jet flow. For fixed epsilon and Sc and Re(j) approximately 900, normalized contaminant flow rate is observed to be approximately twice that of simple diffusion. This model predicts modest net axial contaminant transport enhancement due to convection-diffusion interaction in the region of the ring vortex.     

Self-consistent model of a pulsed air discharge excited by surface waves

A complete self-consistent electrodynamic model of a pulsed gas discharge excited by surface waves is developed. The model allows one to calculate both the initial phase of the discharge front propagation and the parameters of the produced plasma. The spatiotemporal evolution of the electromagnetic field and plasma parameters at the discharge front is investigated for the first time. It is shown that discharge propagation is mainly governed by a breakdown wave in an inhomogeneous electric field at the leading edge of the ionization front. It is found that the effect of the electric field enhancement in the plasma resonance region significantly affects the velocity of the breakdown wave. The results of calculations agree well with experimental data.