两种树脂固相合成机体保护肽的比较

目的:比较Wang树脂和二氯三苯甲基树脂(以下简称二氯树脂)在固相合成机体保护肽中的表现,为工业化生产提供理论依据。方法:通用的Fmoc固相合成法制备机体保护肽,通过比色法对两种树脂与氨基酸的偶联率进行比较,用质谱(MALDI-TOFMS)对粗肽进行鉴定分析,用反相高效液相色谱(RP-HPLC)进行粗肽的分析和纯化。结果:显示以二氯树脂作载体,第一个氨基酸的连接率,以及机体保护肽的纯度和产率都要明显高于Wang树脂。结论:二氯树脂作载体合成机体保护肽更适合大规模工业化生产的要求。     

Successful synthesis of a glial-specific blood–brain barrier shuttle peptide following a fragment condensation approach on a solid-phase resin

Successful manual synthesis of the TD2.2 peptide acting as a blood–brain barrier shuttle was achieved. TD2.2 was successfully synthesised by sequential condensation of four protected peptide fragments on solid-phase settings, after several unsuccessful attempts using the stepwise approach. These fragments were chosen to minimise the number of demanding amino acids (in terms of coupling, Fmoc removal) in each fragment that are expected to hamper the overall synthetic process. Thus, the hydrophobic amino acids as well as Arg(Pbf) were strategically spread over multiple fragments rather than having them congested in one fragment. This study shows how a peptide that shows big challenges in the synthesis using the common stepwise elongation methodology can be synthesised with an acceptable purity. It also emphasises that choosing the right fragment with certain amino acid constituents is key for a successful synthesis. It is worth highlighting that lower amounts of reagents were required to synthesise the final peptide with an identical purity to that obtained by the automatic synthesiser.     

Development of the efficient preparation method for thermoresponsive elastin-like peptides using liquid-phase synthesis combined with fragment condensation strategy

Elastin-like peptides (ELPs) are synthetic peptides that mimic the characteristic hydrophobic amino acid repeat sequences of elastin and exhibit temperature-dependent reversible self-assembly properties. ELPs are expected to be used as temperature-responsive biomolecular materials across diverse industrial and research fields, and there is a requirement for a straightforward method to mass-produce them. Previously, we demonstrated that phenylalanine-containing ELP analogs, namely, (FPGVG)_n, can undergo coacervation with short chains (n = 5). The Fmoc solid-phase peptide synthesis method is one strategy used to synthesize these short ELPs. However, owing to its low reaction efficiency, an efficient method for preparing ELPs is required. In this study, efficient preparation of ELPs was investigated using a liquid-phase synthesis method with a hydrophobic benzyl alcohol support (HBA-tag). Because HBA-tags are highly hydrophobic, they can be easily precipitated by the addition of poor solvents and recovered by filtration. This property allows the method to combine the advantages of the simplicity of solid-phase methods and the high reaction efficiency of liquid-phase methods. By utilizing liquid-phase fragment condensation with HBA-tags, short ELPs were successfully obtained in high yield and purity. Finally, the temperature-dependent response of the ELPs generated through fragment condensation was assessed using turbidity measurements, which revealed a reversible phase transition. Consequently, the ELPs exhibited a reversible phase transition, indicating successful synthesis of ELPs via fragment preparation with tags. These findings provide evidence of the potential for mass production of ELPs using this approach.     

Solid-phase fragment condensation for synthesis of peptides from the immunodominant sequence of β<Subscript>1</Subscript>-adrenoreceptor

The P26 peptide corresponding to the 197–222 sequence of the second extracellular loop of the β₁-adrenoreceptor (β₁-AR) was synthesized by solid-phase fragment condensation on the Wang polymer. Pentapeptide fragments were prepared on the 2-chlorotrityl resin. The racemization degree of the C-terminal alanine residue of the pentapeptide was experimentally evaluated for the synthetic H-Glu-Ser-Asp-Glu-Ala-Arg-OH hexapeptide β₁-АR-(202–207) which was prepared by the 5 + 1 fragment condensation with the use of various condensing agents. A content of the diastereoisomeric peptide in the products of the fragment condensation was determined by HPLC on a reversed phase. The D-alanine-containing hexapeptide was specially synthesized and used for a comparison. The minimum racemization degree of the C-terminal alanine residue was observed if complex F was applied to the synthesis of the hexapeptide.     

Synthesis of serum thymic factor (FTS) and two analogs

Serum thymic factor (FTS) and [Gln¹]-FTS were synthesized by fragment condensation using the azide procedure. [d-Ala⁶]-FTS was prepared by stepwise amino acid condensation in combination with fragment condensation on solid-phase resin. Synthetic FTS and [Gln¹]-FTS both enhanced the delayed-type hypersensitivity (DTH) level to sheep red blood cells (SRBC) in mice at a dose of 0.1 ng/mouse per day, while a dose of 1.0 ng/mouse per day of [d-Ala⁶]-FTS was needed for the enhancement reaction.     

New allyl ester linker and solid-phase block synthesis of the serglycin core region

The prototype glycopeptidyl fragments of serglycin, a proteoglycan with the characteristic peptide sequence of repeating L-seryl-L-glycine, were synthesized by a convergent method involving block condensation on a solid support. In order to facilitate detachment of the protected glycopeptides from the resin, a new allyl ester type of linker, which is cleavable by Pd(O)-catalysis, was designed and used in combination with the commercial acid-labile Sieber amide resin for the solid-phase synthesis. Glycopeptide blocks consisting of [O-(2,3,4-tri-O-acetyl-D-xylosyl)-L-seryl-L-glycine]n (n = 1 - 8) were produced in good yields. Block condensation in a solution was also successful to synthesize up to the hexadecapeptide (n = 8).     

New Allyl Ester Linker and Solid-phase Block Synthesis of the Serglycin Core Region

The prototype glycopeptidyl fragments of serglycin, a proteoglycan with the characteristic peptide sequence of repeating L-seryl-L-glycine, were synthesized by a convergent method involving block condensation on a solid support. In order to facilitate detachment of the protected glycopeptides from the resin, a new allyl ester type of linker, which is cleavable by Pd(0)-catalysis, was designed and used in combination with the commercial acid-labile Sieber amide resin for the solid-phase synthesis. Glycopeptide blocks consisting of [O-(2,3,4-tri-O-acetyl-D-xylosyl)-L-seryl-L-glycine]n (n=1-8) were produced in good yields. Block condensation in a solution was also successful to synthesize up to the hexadecapeptide (n=8).     

Regio-reactive resin: a platform for orthogonal loading using the polymer backbone and cross-linker.

A new support for solid-phase combinatorial organic synthesis has been developed, which we term a regio-reactive resin (R(3)-resin). The resin is based on a unique hydroxyl-functionalized cross-linker readily synthesized in two steps starting from 4-hydroxybenzaldehyde. The cross-linker's ease of synthesis and high purity enables the preparation of gel-type resins with regio-reactive orthogonal loading sites. The resin's swelling properties were investigated, and its potential utility was demonstrated via orthogonal reactivity of the pendant and cross-linker sites.     

A convergent liquid-phase synthesis of salmon calcitonin.

Salmon calcitonin (sCT) was prepared in good yield and high purity by the condensation of Nalpha-Boc-cyclic decapeptide, Boc-C1SNLSTC7VLG-OH (1,7-disulfide), with protected docosapeptide (Psc)LSQE(OPse)LHK(Psc)LQTYPRTNTGSGTP-NH2 x 3TFA, followed by deprotection of Boc with trifluoroacetic acid and Psc/Pse with piperidine. The 2-(phenylsulfonyl)ethoxycarbonyl (Psc) and 2-(phenylsulfonyl)ethyl (Pse) protecting groups were recently developed. The two peptides were built up by stepwise and fragment condensation using appropriate Nalpha-Boc-amino acids and subsequent deprotection in solution. The synthetic sCT exhibited hypocalcemic potency of more than 4000 IU/mg in rats.     

人脑利钠肽的Fmoc固相合成

探讨生物活性肽人脑利钠肽(BNP)的固相合成工艺,并为工业化合成提供理论依据.本文以二氯三甲基树脂(以下简称为二氯树脂)为载体,采用9-芴甲氧羰基(Fmoc)保护的氨基酸,以1-氧-3-双二甲胺羰基苯骈三氮唑四氟化硼盐(TBTU)/1-羟基苯并三氮唑(HOBT)/二异丙基乙胺(DIEA)缩合,以碘作为环化试剂,用切割试剂将BNP粗品从树脂上切割下来.通过MALDI-MS质谱仪检测,所合成环肽的分子量与理论分子量一致,使用RP-HPLC液相色谱仪对合成的环肽进行纯化,得到的BNP纯度达到97%以上.本合成工艺具有快捷、简便、高效的特点,适合于大批量的生产目的肽.     

Investigations on peptide synthesis with polymeric supports: synthesis and characterization of the deamido-calcitonin-M-(19-32)-tetradecapeptide by use of the soluble support polyethyleneglycol and coupling of the products to the insoluble polystyryl-benzhydrylamine resin (author's transl)]

The synthesis of the deamido-calcitonin-M-(19-32)-tetradecapeptide Boc-Phe-His-Thr(Bzl)-Phe-Pro-Gln-Thr(Bzl)-Ala-Ile-Gly-Val-Gly-Ala-Pro-OH (I) by the use of the soluble polymeric support polyethyleneglycol is described. For product characterization the following compounds were prepared:H-Phe-His-Thr(Bzl)-Phe-Pro-Gln-Thr(Bzl)-Ala-Ile-Gly-Val-Gly-Ala-Pro-OH and H-Phe-His-Thr-Phe-Pro-Gln-Thr-Ala-Ile-Gly-Ala-Pro-OH. The analyses of these products by ion exchange chromatography indicates that the correct tetradecapeptide sequence was synthesized to more than 90%. Despite high yields in the coupling reactions, crude I was inhomogenous due to partial cleavage to O-benzyl ether bonds. In order to use I for the total synthesis of calcitonin M, it was coupled to the insoluble polystyryl-benzhydrylamine resin. 0.08 mmol of peptide was coupled per g of resin. Treatment of this peptide resin with hydrogen fluoride yielded H-Phe-His-Thr-Phe-Gln-Thr-Ala-Ile-Gly-Val-Gly-Ala-Pro-NH2.     

A simple oxazolidine linker for solid-phase synthesis of peptide aldehydes

A very simple and cheap linker has been used for solid-phase synthesis of peptide aldehydes. Protected amino acid aldehydes are immobilized on 2-Cl(trt) resin as oxazolidine formation via diethanolamine. After classical Fmoc SPPS, treatment of the resin with AcOH/DCM/H(2)O (8:1:1) affords peptide aldehydes in high yield and purity.     

Acanthoscurrin fragment 101-132: total synthesis at 60 degrees C of a novel difficult sequence

Glycine-rich proteins (GRPs) serve a variety of biological functions. Acanthoscurrin is an antimicrobial GRP isolated from hemocytes of the Brazilian spider Acanthoscurria gomesiana. Aiming to contribute to the knowledge of the secondary structure and stepwise solid-phase synthesis of GRPs' glycine-rich domains, we attempted to prepare G(101)GGLGGGRGGGYG(113)GGGGYGGGYG(123) GGY(126)GGGKYK(132)-NH(2), acanthoscurrin C-terminal amidated fragment. Although a theoretical prediction did not indicate high aggregation potential for this peptide, repetitive incomplete aminoacylations were observed after incorporating Tyr(126) to the growing peptide-MBHA resin (Boc chemistry) at 60 degrees C. The problem was not solved by varying the coupling reagents or solvents, adding chaotropic salts to the reaction media or changing the resin/chemistry (Rink amide resin/Fmoc chemistry). Some improvement was made when CLEAR amide resin (Fmoc chemistry) was used, as it allowed for obtaining fragment G(113)-K(132). NIR-FT-Raman spectra collected for samples of the growing peptide-MBHA, -Rink amide resin and -CLEAR amide resin revealed the presence of beta-sheet structures. Only the combination of CLEAR-amide resin, 60 degrees C, Fmoc-(Fmoc-Hmb)Gly-OH and LiCl (the last two used alternately) was able to inhibit the phenomenon, as proven by NIR-FT-Raman analysis of the growing peptide-resin, allowing the total synthesis of desired fragment Gly(101)-K(132). In summary, this work describes a new difficult sequence, contributes to understanding stepwise solid-phase synthesis of this type of peptide and shows that, at least while protected and linked to a resin, this GRP's glycine-rich motif presents an early tendency to assume beta-sheet structures.     

Synthesis of a [Glu5, Ala12, Ala18, Ala21]sheep insulin-A-chain by fragment condensation on a polymer support (author's transl)]

The synthesis of a [Glu5, Ala12, Ala18,-Ala21]sheep insulin-A-chain by condensation of 5 fragments on a polymer support is described. The 5 fragments Boc-Gly-Ile-Val-Glu(gammaOBut)-Glu(gammaOBut) (V), Boc-Cys(SiPr) (IV), Boc--Cys(SiPr)-Ala-Gly-Val (III), Boc-Cys(SiPr)-Ala-Leu-Tyr-Gln-Leu (II) and Boc-Glu(gammaOBut)-Ala--Tyr(Bzl)-Cys(SiPr)-N2H3 (I) were synthesized by conventional methods and coupled with dicyclohexylcarbodiimide/1-hydroxybenzotriazol (II, III, IV, V) and by the azide method (I) with coupling yields of 60-98% on an Ala-polymer. The failure sequence peptides were separated by ion exchange chromatography on DEAE-Sephadex and by chromatography on Biogel P4. The A-chain was obtained in 9% yield, which, after combinations with natural B-chain, gave insulin activities comparable to that obtained with natural A-chain. These results demonstrate that fragment condensation by the solid-phase method together with simple techniques for purification can be used for the synthesis of longer peptides.     

两种树脂对固相法合成丙型肝炎疫苗多肽的影响

本实验采用固相法合成丙型肝炎疫苗多肽,比较Wang树脂和二氯三苯甲基树脂（以下简称二氯树脂）作为载体时的连接率以及目标肽的产率和纯度。通过质谱鉴定分析所得目标多肽的分子量,用茚三酮法对两种树脂与氨基酸的连接率进行比较,用反相高效液相色谱（RP-HPLC）进行粗肽的分析和纯化。结果显示以二氯树脂作载体,第一个氨基酸的连接率,以及目标肽的纯度和产率都要明显高于Wang树脂,因此二氯树脂作载体合成丙型肝炎疫苗多肽更适合大规模工业化生产的要求。     

Problem of aspartimide formation in Fmoc-based solid-phase peptide synthesis using Dmab group to protect side chain of aspartic acid.

The sequence-dependent, acid- or base-catalysed aspartimide formation is one of the most serious side reactions in solid-phase synthesis of peptides containing aspartic acid. In the present work, we investigated the susceptibility of 4-(N-[1-(4,4-dimethyl-2,6-dioxocyclohexylidene)-3-methylbutyl]amino)benzyl (Dmab), an aspartic acid beta-carboxy side-chain protecting group, for aspartimide formation. As a model, 15-amino acid-residue galanin fragment analogue containing the Asp-Ala motif was used during Fmoc-based solid-phase synthesis. Our study showed a strong tendency of Dmab-protected peptide to form aspartimide with unusual high efficiency. Furthermore, to investigate the susceptibility of Asp-Ala motif for aspartimide formation during the synthesis using Asp(ODmab), a 5-amino acid-residue galanin fragment LGPDA, different types of resin linkers, variety of Fmoc-deprotection conditions and coupling methods were applied.     

Polyethyleneglycol graft copoly (styrene-1,4-butanediol dimethacrylate) resin for gel-phase peptide synthesis

Summary Synthesis and characterization of a flexible crosslinked polystyrene grafted polyethyleneglycol (PEG) resin which allows for efficient synthesis of aggregating peptides in high yield and purity has been described. The resin showed rigidity, mechanical and chemical stability, and improved swelling and solvation characteristics essential for the successful synthesis of peptides. To demonstrate the usefulness of the new resin in polypeptide synthesis, a 4-(hydroxymethyl)phenoxyacetic acid (HMPA) handle was anchored to the free terminus of PEG and a typical hydrophobic peptide, Alzheimer’s β-amyloid plaque protein (33–42) fragment, was synthesized using Fmoc/tBu tactics. The new resin was compared with commercially available 1 mol% divinylbenzene (DVB)-crosslinked Tentagel resin under identical conditions. HPLC profiles and LC/MS analyses of the crude products revealed the high synthetic efficiency of the newly developed support. Efficiency of the resin was further illustrated by the gel-phase synthesis of a 15-residue peptide, (28–42) fragment of β-amyloid protein.     

Syntheses, characterization and application of cross-linked polystyrene-ethyleneglycol acrylate resin (CLPSER) as a novel polymer support for polypeptide syntheses.

Cross-linked polystyrene-ethyleneglycol acrylate resin (CLPSER) was developed for the solid-phase synthesis of peptide by introducing a cross-linker, O,O'-bis(2-acrylamidopropyl)polyethylene glycol(1900) (Acr(2)PEG), into polystyrene. The cross-linker was prepared by treating acryloyl chloride with O,O'-bis(2-aminopropyl) polyethylene glycol(1900) [(NH(2))(2)PEG] in the presence of diisopropylethylamine. The copolymer was prepared either by bulk or inverse suspension copolymerization of Acr(2)PEG(1900) and styrene using sorbitan monolaurate as the suspension stabilizer, and a mixture of ammonium peroxodisulfate and benzoyl peroxide as the radical initiators. The resin was characterized using gel-phase (13)C NMR, infrared (KBr) spectroscopic techniques and the morphological features of the resin were investigated using scanning electron microscopy photographs. CLPSER showed excellent swelling in a broad range of solvents and was found to be chemically inert to various reagents and solvents used in solid-phase peptide synthesis. To demonstrate the usefulness of the new resin in polypeptide synthesis, the support was derivatized with an 'internal reference' amino acid (norleucine) and a handle 4-(4-hydroxymethyl-3-methoxy)butyric acid. The new resin was compared with commercial supports such as Merrifield and Sheppard resins by synthesizing an acyl carrier protein (65-74) fragment under the same experimental conditions. HPLC profiles revealed the high efficiency of the newly developed support. Resin capability in peptide synthesis was further demonstrated by the solid phase synthesis of a 25-residue peptide from the E2/NS1 region hepatitis C viral polyprotein.     

Improving the performance of an acid-labile 4-hydroxymethyl phenoxyacetic acid (HMP) linker on resin and SynPhase grafted solid-supports.

A replacement of the acetic acid moiety by valeric acid within the 4-hydroxymethylphenoxyacetic acid (HMP) linker (Sheppard RC, Williams BJ. Acid-labile resin linkage agents for use in solid phase peptide synthesis. Int. J. Peptide Protein Res. 1982; 20: 451-454) significantly improved its performance in terms of loading capacity, yield and purity of the final products. The results indicated the spacer-linker combination and type of solid supports are important factors for solid-phase synthesis.     

Comparison of the stepwise and convergent approaches in the solid-phase synthesis of rat Tyr0-atriopeptin II

Tyr⁰-Atriopeptin II was synthesized on a 2-chlorotrityl resin by both the stepwise and the convergent approach. For both methods an Fmoc/tBu(Trt)-based protection scheme was used. The convergent methodology utilizes the sequential condensation of four protected peptide fragments. These were chosen so that after every condensation reaction, the amino-terminal region of the newly formed resin-bound peptide did not contain a -turn. This designed convergent synthesis gave the target peptide in much higher yield and purity than the conventional step-by-step synthesis.