The protein–protein interactions required for assembly of the Tn3 resolution synapse

The site-specific recombinase Tn3 resolvase initiates DNA strand exchange when two res recombination sites and six resolvase dimers interact to form a synapse. The detailed architecture of this intricate recombination machine remains unclear. We have clarified which of the potential dimer–dimer interactions are required for synapsis and recombination, using a novel complementation strategy that exploits a previously uncharacterized resolvase from Bartonella bacilliformis (“Bart”). Tn3 and Bart resolvases recognize different DNA motifs, via diverged C-terminal domains (CTDs). They also differ substantially at N-terminal domain (NTD) surfaces involved in dimerization and synapse assembly. We designed NTD-CTD hybrid proteins, and hybrid res sites containing both Tn3 and Bart dimer binding sites. Using these components in in vivo assays, we demonstrate that productive synapsis requires a specific “R” interface involving resolvase NTDs at all three dimer-binding sites in res. Synapses containing mixtures of wild-type Tn3 and Bart resolvase NTD dimers are recombination-defective, but activity can be restored by replacing patches of Tn3 resolvase R interface residues with Bart residues, or vice versa. We conclude that the Tn3/Bart family synapse is assembled exclusively by R interactions between resolvase dimers, except for the one special dimer–dimer interaction required for catalysis.     

The catalytic residues of Tn3 resolvase

To characterize the residues that participate in the catalysis of DNA cleavage and rejoining by the site-specific recombinase Tn3 resolvase, we mutated conserved polar or charged residues in the catalytic domain of an activated resolvase variant. We analysed the effects of mutations at 14 residues on proficiency in binding to the recombination site (‘site I’), formation of a synaptic complex between two site Is, DNA cleavage and recombination. Mutations of Y6, R8, S10, D36, R68 and R71 resulted in greatly reduced cleavage and recombination activity, suggesting crucial roles of these six residues in catalysis, whereas mutations of the other residues had less dramatic effects. No mutations strongly inhibited binding of resolvase to site I, but several caused conspicuous changes in the yield or stability of the synapse of two site Is observed by non-denaturing gel electrophoresis. The involvement of some residues in both synapsis and catalysis suggests that they contribute to a regulatory mechanism, in which engagement of catalytic residues with the substrate is coupled to correct assembly of the synapse.     

Nicked-site substrates for a serine recombinase reveal enzyme–DNA communications and an essential tethering role of covalent enzyme–DNA linkages

To analyse the mechanism and kinetics of DNA strand cleavages catalysed by the serine recombinase Tn3 resolvase, we made modified recombination sites with a single-strand nick in one of the two DNA strands. Resolvase acting on these sites cleaves the intact strand very rapidly, giving an abnormal half-site product which accumulates. We propose that these reactions mimic second-strand cleavage of an unmodified site. Cleavage occurs in a synapse of two sites, held together by a resolvase tetramer; cleavage at one site stimulates cleavage at the partner site. After cleavage of a nicked-site substrate, the half-site that is not covalently linked to a resolvase subunit dissociates rapidly from the synapse, destabilizing the entire complex. The covalent resolvase–DNA linkages in the natural reaction intermediate thus perform an essential DNA-tethering function. Chemical modifications of a nicked-site substrate at the positions of the scissile phosphodiesters result in abolition or inhibition of resolvase-mediated cleavage and effects on resolvase binding and synapsis, providing insight into the serine recombinase catalytic mechanism and how resolvase interacts with the substrate DNA.     

Sequences in attB that affect the ability of phiC31 integrase to synapse and to activate DNA cleavage

Phage integrases are required for recombination of the phage genome with the host chromosome either to establish or exit from the lysogenic state. ϕC31 integrase is a member of the serine recombinase family of site-specific recombinases. In the absence of any accessory factors integrase is unidirectional, catalysing the integration reaction between the phage and host attachment sites, attP × attB to generate the hybrid sites, attL and attR. The basis for this directionality is due to selective synapsis of attP and attB sites. Here we show that mutations in attB can block the integration reaction at different stages. Mutations at positions distal to the crossover site inhibit recombination by destabilizing the synapse with attP without significantly affecting DNA-binding affinity. These data are consistent with the proposal that integrase adopts a specific conformation on binding to attB that permits synapsis with attP. Other attB mutants with changes close to the crossover site are able to form a stable synapse but cleavage of the substrates is prevented. These mutants indicate that there is a post-synaptic DNA recognition event that results in activation of DNA cleavage.     

Activating mutations of Tn3 resolvase marking interfaces important in recombination catalysis and its regulation

Catalysis of DNA recombination by Tn3 resolvase is conditional on prior formation of a synapse, comprising 12 resolvase subunits and two recombination sites (res). Each res binds a resolvase dimer at site I, where strand exchange takes place, and additional dimers at two adjacent 'accessory' binding sites II and III. 'Hyperactive' resolvase mutants, that catalyse strand exchange at site I without accessory sites, were selected in E. coli. Some single mutants can resolve a res x site I plasmid (that is, with one res and one site I), but two or more activating mutations are necessary for efficient resolution of a site I x site I plasmid. Site I x site I resolution by hyperactive mutants can be further stimulated by mutations at the crystallographic 2-3' interface that abolish activity of wild-type resolvase. Activating mutations may allow regulatory mechanisms of the wild-type system to be bypassed, by stabilizing or destabilizing interfaces within and between subunits in the synapse. The positions and characteristics of the mutations support a mechanism for strand exchange by serine recombinases in which the DNA is on the outside of a recombinase tetramer, and the tertiary/quaternary structure of the tetramer is reconfigured.     

A model for the gamma delta resolvase synaptic complex

The serine recombinase gamma delta resolvase performs site-specific recombination in an elaborate synaptic complex containing 12 resolvase subunits and two 114-base pair res sites. Here we present an alternative structural model for the synaptic complex. Resolvase subunits in the complex contact their neighbors in equivalent ways, using three principal interactions, one of which is a newly proposed synaptic interaction. Evidence in support of this interaction is provided by mutations at the interface that either enable resolvase to synapse two copies of site I or inhibit synapsis of complete res sites. In our model, the two crossover sites are far apart, separated by the resolvase catalytic domains bound to them. Thus, recombination would require a substantial rearrangement of resolvase subunits or domains.     

Mutants of Tn3 resolvase which do not require accessory binding sites for recombination activity

Tn3 resolvase promotes site-specific recombination between two res sites, each of which has three resolvase dimer-binding sites. Catalysis of DNA-strand cleavage and rejoining occurs at binding site I, but binding sites II and III are required for recombination. We used an in vivo screen to detect resolvase mutants that were active on res sites with binding sites II and III deleted (that is, only site I remaining). Mutations of amino acids Asp102 (D102) or Met103 (M103) were sufficient to permit catalysis of recombination between site I and a full res, but not between two copies of site I. A double mutant resolvase, with a D102Y mutation and an additional activating mutation at Glu124 (E124Q), recombined substrates containing only two copies of site I, in vivo and in vitro. In these novel site Ixsite I reactions, product topology is no longer restricted to the normal simple catenane, indicating synapsis by random collision. Furthermore, the mutants have lost the normal specificity for directly repeated sites and supercoiled substrates; that is, they promote recombination between pairs of res sites in linear molecules, or in inverted repeat in a supercoiled molecule, or in separate molecules.     

Inhibitor analysis of synapsis by resolvase

Previously, we isolated several inhibitors that block the site-specific recombination reaction mediated by the Tn3-encoded resolvase protein. One class of inhibitors blocks resolvase binding to the recombination (res) sitc, and a second class inhibits synapse formation between resolvase and two directly repeated res sites. In this report, we identify an inhibitor, A20832, that does not inhibit resolvase binding to res, as measured by filter binding, or synapse formation. Inhibition of resolvase-promoted site-specific recombination by A20832 occurs postsynaptically at strand cleavage. DNase I analysis in the presence of A20832 indicates that only site I of res is bound by resolvase.     

Synapsis and DNA cleavage in phiC31 integrase-mediated site-specific recombination

The Streptomyces phage C31 encodes an integrase belonging to the serine recombinase family of site-specific recombinases. The well studied serine recombinases, the resolvase/invertases, bring two recombination sites together in a synapse, and then catalyse a concerted four-strand staggered break in the DNA substrates whilst forming transient covalent attachments with the recessed 5′ ends. Rotation of one pair of half sites by 180° relative to the other pair occurs, to form the recombinant configuration followed by ligation of the DNA backbone. Here we address the nature of the recombination intermediates formed by C31 integrase when acting on its substrates attP and attB. We have identified intermediates containing integrase covalently attached to cleaved DNA substrates, attB or attP, by analysis of complexes in gels and after treatment of these complexes with proteinases. Using a catalytically inactive integrase mutant, S12A, the synaptic complexes containing integrase, attP and attB were identified. Furthermore, we have shown that attB mutants containing insertions or deletions are blocked in recombination at the stage of strand cleavage. Thus, there is a strict spacing requirement within attB, possibly for correct positioning of the catalytic serine relative to the scissile phosphate in the active site. Finally, using integrase S12A we confirmed the inability of attL and attR or other combinations of sites to form a stable synapse, indicating that the directionality of integrative recombination is determined at synapsis.     

DNA binding and synapsis by the large C-terminal domain of ϕC31 integrase

The integrase (Int) from phage ϕC31 acts on the phage and host-attachment sites, attP and attB, to form an integrated prophage flanked by attL and attR. Excision (attL × attR recombination) is prevented, in the absence of accessory factors, by a putative coiled-coil motif in the C-terminal domain (CTD). Int has a serine recombinase N-terminal domain, required for synapsis of recombination substrates and catalysis. We show here that the coiled-coil motif mediates protein–protein interactions between CTDs, but only when bound to DNA. Although the histidine-tagged CTD (hCTD) was monomeric in solution, hCTD bound cooperatively to three of the recombination substrates (attB, attL and attR). Furthermore, when provided with attP and attB, hCTD brought these substrates together in a synaptic complex. Substitutions in the coiled-coil motif that greatly reduce Int integration activity, L460P and Y475H, prevented CTD–CTD interactions and led to defective DNA binding and no detectable DNA synapsis. A substitution, E449K, in full length Int confers the ability to perform excision in addition to integration as it has gained the ability to synapse attL × attR. hCTD^E449K was similar to hCTD in DNA binding but unable to form the CTD synapse suggesting that the CTD synapse is not essential but could be part of the mechanism that controls directionality.     

Analysis of inhibitors of the site-specific recombination reaction mediated by Tn3 resolvase

The Tn3-encoded resolvase protein promotes a site-specific recombination reaction between two directly repeated copies of the recombination site res. Several inhibitors that block this event in vitro have been isolated. In this study four of these inhibitors were tested on various steps in the recombination reaction. Two inhibitors. A9387 and A1062, inhibit resolvase binding to the res site. Further, DNase I footprinting revealed that at certain concentrations of A9387 and A1062, resolvase was preferentially bound to site I of res, the site containing the recombinational crossover point. The two other inhibitors, A20812 and A21960, do not affect resolvase binding and bending of the DNA but inhibit synapse formation between resolvase and two directly repeated res sites.     

Use of a transposon-encoded site-specific resolution system for construction of large and defined deletion mutations in bacterial chromosome

A class II transposon, Tn1722, encodes a site-specific resolution system, in which the resolvase (TnpR) efficiently catalyzes intramolecular recombination between the two directly oriented copies of the resolution site (res), leading to precise excision of the intervening DNA region. This property was exploited to develop the general strategies to introduce the large and defined deletion mutations into the bacterial chromosome. The Tn1722 res site was inserted into the plasmid carrying a cloned chromosomal fragment, and the resulting plasmid was integrated into a Tn1722-containing target chromosome by single crossover-mediated homologous recombination. The plasmid integrant carrying the two copies of the res site in the same orientation could efficiently excise the chromosomal region locating between the two res sites by means of the site-specific resolution system. Such site-specific deletion could be also detected by appropriate integration of the res–tnpR-containing plasmid into the chromosome in which another copy of the res site had been inserted through allelic exchange. This latter strategy was further modified to isolate the deletion mutations that were free of the resistance markers used for introduction of the res site and the res–tnpR block into the target chromosome. The deletion systems were applied to analyze the 103-kb pvd region of Pseudomonas aeruginosa PAO carrying most of the pyoverdin biosynthetic genes. Successful isolation of the mutation lacking more than a 100-kb fragment in the pvd region indicated that this region did not carry any essential genes.     

DNA communications by Type III restriction endonucleases--confirmation of 1D translocation over 3D looping

DNA cleavage by Type III restriction enzymes is governed strictly by the relative arrangement of recognition sites on a DNA substrate—endonuclease activity is usually only triggered by sequences in head-to-head orientation. Tens to thousands of base pairs can separate these sites. Long distance communication over such distances could occur by either one-dimensional (1D) DNA translocation or 3D DNA looping. To distinguish between these alternatives, we analysed the activity of EcoPI and EcoP15I on DNA catenanes in which the recognition sites were either on the same or separate rings. While substrates with a pair of sites located on the same ring were cleaved efficiently, catenanes with sites on separate rings were not cleaved. These results exclude a simple 3D DNA-looping activity. To characterize the interactions further, EcoPI was incubated with plasmids carrying two recognition sites interspersed with two 21res sites for site-specific recombination by Tn21 resolvase; inhibition of recombination would indicate the formation of stable DNA loops. No inhibition was observed, even under conditions where EcoPI translocation could also occur.     

Switching the polarity of a bacteriophage integration system

During lysogenic growth many temperate bacteriophage genomes are integrated into the host's chromosome and efficient integration and excision are therefore an essential part of the phage life cycle. The Streptomyces phage phiC31 encodes an integrase related to the resolvase/invertases and is evolutionarily and mechanistically distinct from the integrase of phage lambda. We show that during phiC31 integration the polarity of the recombination sites, attB and attP, is dependent on the sequences of the two base pairs (bp) where crossover occurs. A loss or switch in polarity of the recombination sites can occur by mutation of this dinucleotide, leading to incorrectly joined products. The properties of the mutant sites implies that phiC31 integrase interacts symmetrically with the substrates, which during synapsis can align apparently freely in either of two alternative forms that lead to correct or incorrect joining of products. Analysis of the topologies of the reaction products provided evidence that integrase can synapse and activate strand exchange even when recombinant products cannot form due to mismatches at the crossover site. The topologies of the recombination products are complex and indicative of multiple pathways to product formation. The efficiency of integration of a phiC31 derivative, KC859, into an attB site with switched polarity was assayed in vivo and shown to be no different from integration into a wild-type attB. Thus neither the host nor KC859 express a factor that influences the alignment of the recombination sites at synapsis.     

Identification of key structural determinants of the IntI1 integron integrase that influence attC x attI1 recombination efficiency

The integron platform codes for an integrase (IntI) from the tyrosine family of recombinases that mediates recombination between a proximal double-strand recombination site, attI and a single-strand target recombination site, attC. The attI site is only recognized by its cognate integrase, while the various tested attCs sites are recombined by several different IntI integrases. We have developed a genetic system to enrich and select mutants of IntI1 that provide a higher yield of recombination in order to identify key protein structural elements important for attC × attI1 recombination. We isolated mutants with higher activity on wild type and mutant attC sites. Interestingly, three out of four characterized IntI1 mutants selected on different substrates are mutants of the conserved aspartic acid in position 161. The IntI1 model we made based on the VchIntIA 3D structure suggests that substitution at this position, which plays a central role in multimer assembly, can increase or decrease the stability of the complex and accordingly influence the rate of attI × attC recombination versus attC × attC. These results suggest that there is a balance between the specificity of the protein and the protein/protein interactions in the recombination synapse.     

Symmetric DNA sites are functionally asymmetric within Flp and Cre site-specific DNA recombination synapses

Flp and Cre-mediated recombination on symmetrized FRT and loxP sites, respectively, in circular plasmid substrates yield both DNA inversion and deletion. However, upon sequestering three negative supercoils outside the recombination complex using the resII-resIII synapse formed by Tn3 resolvase and the LER synapse formed by phage Mu transposase in the case of Flp and Cre, respectively, the reactions are channeled towards inversion at the expense of deletion. The inversion product is a trefoil, its unique topology being conferred by the external resolvase or LER synapse. Thus, Flp and Cre assign their symmetrized substrates a strictly antiparallel orientation with respect to strand cleavage and exchange. These conclusions are supported by the product profiles from tethered parallel and antiparallel native FRT sites in dilution and competition assays. Furthermore, the observed recombination bias favoring deletion over inversion in a nicked circular substrate containing two symmetrized FRT sites is consistent with the predictions from Monte Carlo simulations based on antiparallel synapsis of the DNA partners.     

Attachment site recognition and regulation of directionality by the serine integrases

Serine integrases catalyze the integration of bacteriophage DNA into a host genome by site-specific recombination between ‘attachment sites’ in the phage (attP) and the host (attB). The reaction is highly directional; the reverse excision reaction between the product attL and attR sites does not occur in the absence of a phage-encoded factor, nor does recombination occur between other pairings of attachment sites. A mechanistic understanding of how these enzymes achieve site-selectivity and directionality has been limited by a lack of structural models. Here, we report the structure of the C-terminal domains of a serine integrase bound to an attP DNA half-site. The structure leads directly to models for understanding how the integrase-bound attP and attB sites differ, why these enzymes preferentially form attP × attB synaptic complexes to initiate recombination, and how attL × attR recombination is prevented. In these models, different domain organizations on attP vs. attB half-sites allow attachment-site specific interactions to form between integrase subunits via an unusual protruding coiled-coil motif. These interactions are used to preferentially synapse integrase-bound attP and attB and inhibit synapsis of integrase-bound attL and attR. The results provide a structural framework for understanding, testing and engineering serine integrase function.     

Protein Engineering of Epoxide Hydrolase from Agrobacterium radiobacter AD1 for Enhanced Activity and Enantioselective Production of (R)-1-Phenylethane-1,2-Diol

DNA shuffling and saturation mutagenesis of positions F108, L190, I219, D235, and C248 were used to generate variants of the epoxide hydrolase of Agrobacterium radiobacter AD1 (EchA) with enhanced enantioselectivity and activity for styrene oxide and enhanced activity for 1,2-epoxyhexane and epoxypropane. EchA variant I219F has more than fivefold-enhanced enantioselectivity toward racemic styrene oxide, with the enantiomeric ratio value (E value) for the production of (R)-1-phenylethane-1,2-diol increased from 17 for the wild-type enzyme to 91, as well as twofold-improved activity for the production of (R)-1-phenylethane-1,2-diol (1.96 ± 0.09 versus 1.04 ± 0.07 μmol/min/mg for wild-type EchA). Computer modeling indicated that this mutation significantly alters (R)-styrene oxide binding in the active site. Another three variants from EchA active-site engineering, F108L/C248I, I219L/C248I, and F108L/I219L/C248I, also exhibited improved enantioselectivity toward racemic styrene oxide in favor of production of the corresponding diol in the (R) configuration (twofold enhancement in their E values). Variant F108L/I219L/C248I also demonstrated 10-fold- and 2-fold-increased activity on 5 mM epoxypropane (24 ± 2 versus 2.4 ± 0.3 μmol/min/mg for the wild-type enzyme) and 5 mM 1,2-epoxyhexane (5.2 ± 0.5 versus 2.6 ± 0.0 μmol/min/mg for the wild-type enzyme). Both variants L190F (isolated from a DNA shuffling library) and L190Y (created from subsequent saturation mutagenesis) showed significantly enhanced activity for racemic styrene oxide hydrolysis, with 4.8-fold (8.6 ± 0.3 versus 1.8 ± 0.2 μmol/min/mg for the wild-type enzyme) and 2.7-fold (4.8 ± 0.8 versus 1.8 ± 0.2 μmol/min/mg for the wild-type enzyme) improvements, respectively. L190Y also hydrolyzed 1,2-epoxyhexane 2.5 times faster than the wild-type enzyme.