Positive Charges of Translocating Polypeptide Chain Retrieve an Upstream Marginal Hydrophobic Segment from the Endoplasmic Reticulum Lumen to the Translocon

Positively charged amino acid residues are well recognized topology determinants of membrane proteins. They contribute to the stop-translocation of a polypeptide translocating through the translocon and to determine the orientation of signal sequences penetrating the membrane. Here we analyzed the function of these positively charged residues during stop-translocation in vitro. Surprisingly, the positive charges facilitated membrane spanning of a marginally hydrophobic segment, even when separated from the hydrophobic segment by 70 residues. In this case, the hydrophobic segment was exposed to the lumen, and then the downstream positive charges triggered the segment to slide back into the membrane. The marginally hydrophobic segment spanned the membrane, but maintained access to the water environment. The positive charges not only fix the hydrophobic segment in the membrane at its flanking position, but also have a much more dynamic action than previously realized.     

Function of positive charges following signal-anchor sequences during translocation of the N-terminal domain

In topogenesis of membrane proteins on the endoplasmic reticulum, the orientation of the hydrophobic transmembrane (TM) segment is influenced by the charge of the flanking amino acid residues. We assessed the function of the positive charges downstream of the hydrophobic segment using synaptotagmin II. The positive charges were systematically replaced with non-charged residues. Although the original TM segment translocated the N terminus, the topology was inverted, depending on the mutations. Orientation was affected in mutants in which 6 Lys were shifted downstream, even when the 6 Lys were 25 residues from the hydrophobic segment. The Lys was functionally replaced by Arg, but not by Asp or Glu. The timing of action during polypeptide elongation indicated that the Lys functions at the ribosome exit sites. We suggest that the commitment of the TM segment to a particular orientation is influenced by far downstream parts of the polypeptide chain and that the positive charges are decoded after exiting the ribosome.     

Insertion of a signal peptide-derived hydrophobic segment into the mature domain of OmpC, an outer membrane protein, does not interfere with the export of the following polypeptide chain across the cytoplasmic membrane of E. coli

The effects of a hydrophobic peptide segment inserted into the amino-terminal region of the mature domain of OmpC, an outer membrane protein, on its translocation across the cytoplasmic membrane was studied. Both the intact OmpC and central domain-deleted OmpC were examined. The hydrophobic segment was derived from the signal peptide of OmpF. Secretory translocation across the cytoplasmic membrane was examined by means of proteinase K treatment. Four monoclonal antibodies that recognize different regions of OmpC were used to characterize proteinase K-resistant fragments. Insertion of the hydrophobic segment did not appreciably prevent the translocation of these proteins across the cytoplasmic membrane, larger parts of them being found as mature forms, which were mostly localized outside the cytoplasmic membrane. Circumstantial evidence supports the view, on the other hand, that the inserted hydrophobic domain was retained in the cytoplasmic membrane. It is concluded, therefore, that the hydrophobic segment, although it is not exported across the cytoplasmic membrane, does not prevent the secretion of the following polypeptide chain. The secretion was dependent on the amino-terminal signal peptide. Insertion of positive charges immediately after the hydrophobic segment resulted in suppression of the translocation. Based on these results possible mechanisms by which the secretion of the polypeptide chain after the hydrophobic segment are discussed.     

Pleiotropic effects of membrane cholesterol upon translocation of protein across the endoplasmic reticulum membrane

Various proteins are translocated through and inserted into the endoplasmic reticulum membrane via translocon channels. The hydrophobic segments of signal sequences initiate translocation, and those on translocating polypeptides interrupt translocation to be inserted into the membrane. Positive charges suppress translocation to regulate the orientation of the signal sequences. Here, we investigated the effect of membrane cholesterol on the translocational behavior of nascent chains in a cell-free system. We found that the three distinct translocation processes were sensitive to membrane cholesterol. Cholesterol inhibited the initiation of translocation by the signal sequence, and the extent of inhibition depended on the signal sequence. Even when initiation was not inhibited, cholesterol impeded the movement of the positively charged residues of the translocating polypeptide chain. In surprising contrast, cholesterol enhanced the translocation of hydrophobic sequences through the translocon. On the basis of these findings, we propose that membrane cholesterol greatly affects partitioning of hydrophobic segments into the membrane and impedes the movement of positive charges.     

Signals for the incorporation and orientation of cytochrome P450 in the endoplasmic reticulum membrane

Cytochrome P450b is an integral membrane protein of the rat hepatocyte endoplasmic reticulum (ER) which is cotranslationally inserted into the membrane but remains largely exposed on its cytoplasmic surface. The extreme hydrophobicity of the amino-terminal portion of P450b suggests that it not only serves to initiate the cotranslational insertion of the nascent polypeptide but that it also halts translocation of downstream portions into the lumen of the ER and anchors the mature protein in the membrane. In an in vitro system, we studied the cotranslational insertion into ER membranes of the normal P450b polypeptide and of various deletion variants and chimeric proteins that contain portion of P450b linked to segments of pregrowth hormone or bovine opsin. The results directly established that the amino-terminal 20 residues of P450b function as a combined insertion-halt-transfer signal. Evidence was also obtained that suggests that during the early stages of insertion, this signal enters the membrane in a loop configuration since, when the amino-terminal hydrophobic segment was placed immediately before a signal peptide cleavage site, cleavage by the luminally located signal peptidase took place. After entering the membrane, the P450b signal, however, appeared to be capable of reorienting within the membrane since a bovine opsin peptide segment linked to the amino terminus of the signal became translocated into the microsomal lumen. It was also found that, in addition to the amino-terminal combined insertion-halt-transfer signal, only one other segment within the P450b polypeptide, located between residues 167 and 185, could serve as a halt-transfer signal and membrane-anchoring domain. This segment was shown to prevent translocation of downstream sequences when the amino-terminal combined signal was replaced by the conventional cleavable insertion signal of a secretory protein.     

Structural requirements for interruption of protein translocation across rough endoplasmic reticulum membrane

Co-translational translocation of proteins across the membrane of rough endoplasmic reticulum (ER) is interrupted by particular amino acid sequences, which are functionally termed "stop-transfer sequence." We analyzed the structural requirements for the interruption of the peptide translocation. By the manipulation of the cDNA of interleukin 2 (IL2), which passes through ER membrane co-translationally, the middle portion of the IL2 molecule was replaced with systematically altered hydrophobic segments, leucine, alanine, or leucine/alanine mixed clusters. Furthermore, charged amino acid residues were introduced just downstream of the hydrophobic segments. These modified IL2 peptides were synthesized with wheat germ cell-free system in the presence of rough microsomes and the topology of the peptides in the microsomes was assessed by post-translational digestion with proteinase K. We obtained the following results. (i) Each modified protein was processed to the mature form but the extent of stop-translocation varied widely. The ratio of the stopped to the translocated products increased as the length and hydrophobicity of the inserted segment increased. (ii) Shorter hydrophobic segments than naturally occurring native transmembrane segment promoted stop-translocation. (iii) Proteins with hydrophobic segments followed by positive charges were more efficiently stop-translocated than those having negative charges. (iv) If the hydrophobicity of the segment was sufficiently high, the positive charges after the segment were not essential for stop-translocation. We also suggest that the stop-transfer process includes protein-protein interaction between the hydrophobic segment and translocation channel.     

Protein folding and translocation across the endoplasmic reticulum membrane

Proteins destined for secretion are translocated across or inserted into the endoplasmic reticulum membrane whereupon they fold and assemble to their native state before their subsequent transport to the Golgi apparatus. Proteins that fail to fold correctly are translocated back across the endoplasmic reticulum membrane to the cytosol where they become substrates for the cytosolic degradative machinery. Central to translocation is a protein pore in the membrane called the translocon that allows passage of proteins in and out of the endoplasmic reticulum. It is clear that the conformation of the polypeptide chain influences the translocation process and that there is a temporal relationship between modification of the chain, translocation and folding. This review will consider when and how the polypeptide chain folds, and how this might influence translocation into and out of the ER; and discuss how protein folding might affect post-translational modification of the polypeptide chain following translocation into the ER lumen.     

Biogenesis and transmembrane topology of the CHIP28 water channel at the endoplasmic reticulum

CHIP28 is a 28-kD hydrophobic integral membrane protein that functions as a water channel in erythrocytes and renal tubule epithelial cell membranes. We examined the transmembrane topology of CHIP28 in the ER by engineering a reporter of translocation (derived from bovine prolactin) into nine sequential sites in the CHIP28 coding region. The resulting chimeras were expressed in Xenopus oocytes, and the topology of the reporter with respect to the ER membrane was determined by protease sensitivity. We found that although hydropathy analysis predicted up to seven potential transmembrane regions, CHIP28 spanned the membrane only four times. Two putative transmembrane helices, residues 52-68 and 143-157, reside on the lumenal and cytosolic surfaces of the ER membrane, respectively. Topology derived from these chimeric proteins was supported by cell-free translation of five truncated CHIP28 cDNAs, by N-linked glycosylation at an engineered consensus site in native CHIP28 (residue His69), and by epitope tagging of the CHIP28 amino terminus. Defined protein chimeras were used to identify internal sequences that direct events of CHIP28 topogenesis. A signal sequence located within the first 52 residues initiated nascent chain translocation into the ER lumen. A stop transfer sequence located in the hydrophobic region from residues 90-120 terminated ongoing translocation. A second internal signal sequence, residues 155-186, reinitiated translocation of a COOH-terminal domain (residues 186-210) into the ER lumen. Integration of the nascent chain into the ER membrane occurred after synthesis of 107 residues and required the presence of two membrane-spanning regions. From this data, we propose a structural model for CHIP28 at the ER membrane in which four membrane- spanning alpha-helices form a central aqueous channel through the lipid bilayer and create a pathway for water transport.     

Protein folding and translocation across the endoplasmic reticulum membrane (Review)

Proteins destined for secretion are translocated across or inserted into the endoplasmic reticulum membrane whereupon they fold and assemble to their native state before their subsequent transport to the Golgi apparatus. Proteins that fail to fold correctly are translocated back across the endoplasmic reticulum membrane to the cytosol where they become substrates for the cytosolic degradative machinery. Central to translocation is a protein pore in the membrane called the translocon that allows passage of proteins in and out of the endoplasmic reticulum. It is clear that the conformation of the polypeptide chain influences the translocation process and that there is a temporal relationship between modification of the chain, translocation and folding. This review will consider when and how the polypeptide chain folds, and how this might influence translocation into and out of the ER; and discuss how protein folding might affect post-translational modification of the polypeptide chain following translocation into the ER lumen.     

Membrane protein topology of oleosin is constrained by its long hydrophobic domain.

Oleosin proteins from Arabidopsis assume a unique endoplasmic reticulum (ER) topology with a membrane-integrated hydrophobic (H) domain of 72 residues, flanked by two cytosolic hydrophilic domains. We have investigated the targeting and topological determinants present within the oleosin polypeptide sequence using ER-derived canine pancreatic microsomes. Our data indicate that oleosins are integrated into membranes by a cotranslational, translocon-mediated pathway. This is supported by the identification of two independent functional signal sequences in the H domain, and by demonstrating the involvement of the SRP receptor in membrane targeting. Oleosin topology was manipulated by the addition of an N-terminal cleavable signal sequence, resulting in translocation of the N terminus to the microsomal lumen. Surprisingly, the C terminus failed to translocate. Inhibition of C-terminal translocation was not dependent on either the sequence of hydrophobic segments in the H domain, the central proline knot motif or charges flanking the H domain. Therefore, the topological constraint results from the length and/or the hydrophobicity of the H domain, implying a general case that long hydrophobic spans are unable to translocate their C terminus to the ER lumen.     

NHE6 protein possesses a signal peptide destined for endoplasmic reticulum membrane and localizes in secretory organelles of the cell

The NHE6 protein is a unique Na(+)/H(+) exchanger isoform believed to localize in mitochondria. It possesses a hydrophilic N-terminal portion that is rich in positively charged residues and many hydrophobic segments. In the present study, signal sequences in the NHE6 molecule were examined for organelle localization and membrane topogenesis. When the full-length protein was expressed in COS7 cells, it localized in the endoplasmic reticulum and on the cell surface. Furthermore, the protein was fully N-glycosylated. When green fluorescent protein was fused after the second (H2) or third (H3) hydrophobic segment, the fusion proteins were targeted to the endoplasmic reticulum (ER) membrane. The localization pattern was the same as that of fusion proteins in which green fluorescent protein was fused after H2 of NHE1. In an in vitro system, H1 behaved as a signal peptide that directs the translocation of the following polypeptide chain and is then processed off. The next hydrophobic segment (H2) halted translocation and eventually became a transmembrane segment. The N-terminal hydrophobic segment (H1) of NHE1 also behaved as a signal peptide. Cell fractionation studies using antibodies against the 15 C-terminal residues indicated that NHE6 protein localized in the microsomal membranes of rat liver cells. All of the NHE6 molecules in liver tissue possess an endoglycosidase H-resistant sugar chain. These findings indicate that NHE6 protein is targeted to the ER membrane via the N-terminal signal peptide and is sorted to organelle membranes derived from the ER membrane.     

Sensing charges of the Ciona intestinalis voltage-sensing phosphatase

Voltage control over enzymatic activity in voltage-sensitive phosphatases (VSPs) is conferred by a voltage-sensing domain (VSD) located in the N terminus. These VSDs are constituted by four putative transmembrane segments (S1 to S4) resembling those found in voltage-gated ion channels. The putative fourth segment (S4) of the VSD contains positive residues that likely function as voltage-sensing elements. To study in detail how these residues sense the plasma membrane potential, we have focused on five arginines in the S4 segment of the Ciona intestinalis VSP (Ci-VSP). After implementing a histidine scan, here we show that four arginine-to-histidine mutants, namely R223H to R232H, mediate voltage-dependent proton translocation across the membrane, indicating that these residues transit through the hydrophobic core of Ci-VSP as a function of the membrane potential. These observations indicate that the charges carried by these residues are sensing charges. Furthermore, our results also show that the electrical field in VSPs is focused in a narrow hydrophobic region that separates the extracellular and intracellular space and constitutes the energy barrier for charge crossing.     

Charged residues are major determinants of the transmembrane orientation of a signal-anchor sequence

Uncleaved signal-anchor sequences of membrane proteins inserted into the endoplasmic reticulum initiate the translocation of either the amino-terminal or the carboxyl-terminal polypeptide segment across the bilayer. Which topology is acquired is not determined by the apolar segment of the signal but rather by the hydrophilic sequences flanking it. To study the role of charged residues in determining the membrane topology, the insertion of mutants of the asialoglycoprotein receptor H1, a single-spanning protein with a cytoplasmic amino terminus, was analyzed in transfected COS-7 cells. When the charged amino acids flanking the hydrophobic signal were mutated to residues of opposite charge, half the polypeptides inserted with the inverted orientation. When, in addition, the amino-terminal domain of the mutant protein was truncated, approximately 90% of the polypeptides acquired the inverted topology. The transmembrane orientation appears to be primarily determined by the charges flanking the signal sequence but is modulated by the domains to be translocated.     

The requirement of a positive charge at the amino terminus can be compensated for by a longer central hydrophobic stretch in the functioning of signal peptides.

A variety of model presecretory proteins, proOmpF-Lpps, possessing different numbers of lysine residues (0, 2, and 4) as positively charged amino acid residues and different numbers of leucine residues (7, 8, and 9) as hydrophobic amino acid residues in their signal peptides were constructed. The effect of positive charges on the in vitro translocation efficiency markedly differed with the number of leucine residues. Positive charges were strongly required for translocation when the hydrophobic region comprised 7 or 8 leucine residues, whereas the translocation of proOmpF-Lpps possessing 9 leucine residues took place efficiently even in the absence of positive charges and the introduction of positive charges did not significantly enhance the translocation efficiency. The translocation of all the proOmpF-Lpps, including one possessing no positive charge, was ATP-, protonmotive force-, and SecA-dependent and accompanied by signal peptide cleavage, indicating that they are translocated via the usual secretory pathway. It is likely that the requirement of positive charges can be compensated for by a longer hydrophobic stretch in the functioning of the signal peptide.     

Two translocating hydrophilic segments of a nascent chain span the ER membrane during multispanning protein topogenesis

During protein integration into the endoplasmic reticulum, the N-terminal domain preceding the type I signal-anchor sequence is translocated through a translocon. By fusing a streptavidin-binding peptide tag to the N terminus, we created integration intermediates of multispanning membrane proteins. In a cell-free system, N-terminal domain (N-domain) translocation was arrested by streptavidin and resumed by biotin. Even when N-domain translocation was arrested, the second hydrophobic segment mediated translocation of the downstream hydrophilic segment. In one of the defined intermediates, two hydrophilic segments and two hydrophobic segments formed a transmembrane disposition in a productive state. Both of the translocating hydrophilic segments were crosslinked with a translocon subunit, Sec61α. We conclude that two translocating hydrophilic segment in a single membrane protein can span the membrane during multispanning topogenesis flanking the translocon. Furthermore, even after six successive hydrophobic segments entered the translocon, N-domain translocation could be induced to restart from an arrested state. These observations indicate the remarkably flexible nature of the translocon.     

Introduction of basic amino acid residues after the signal peptide inhibits protein translocation across the cytoplasmic membrane of Escherichia coli. Relation to the orientation of membrane proteins

The introduction of positive charges at the amino terminus of the mature domain of secretory proteins resulted in strong inhibition of their translocation across the cytoplasmic membrane of Escherichia coli, both in vitro and in vivo. The model secretory proteins used were OmpF-Lpp chimeric proteins possessing a cleavable or uncleavable signal peptide, beta-lactamase (Bla) and Bla-Lpp chimeric proteins. It is suggested that positively charged residues preceding the hydrophobic domain of the signal peptide have a positive effect, and ones following the hydrophobic domain, a negative effect on the translocation. These findings are discussed in relation to the orientation of membrane proteins, of which positive charges are predominant on the cytoplasmic surface.     

Molecular dissection of the NH2-terminal signal/anchor sequence of rat dipeptidyl peptidase IV

Dipeptidyl peptidase IV (DPPIV) is a membrane glycoprotein with a type II orientation in the plasma membrane. As shown in a cell-free translation system, the amino-terminal 34 amino acids of rat DPPIV are involved in translocating nascent polypeptide across the membrane of microsomes and in anchoring the translocated polypeptide in the microsomal membrane. The amino-terminal sequence performing this dual function is composed of: a central hydrophobic core of 22 amino acid residues; 6 amino-terminal residues preceding the hydrophobic core (MKTPWK); and 6 residues following the hydrophobic core. The six residues preceding the hydrophobic core are exposed on the outside (cytoplasmic side) of the microsomal membrane. Site-directed mutagenesis studies show that deletion of this cytoplasmic domain, excluding the amino-terminal initiating methionine, does not affect translocation of nascent DPPIV polypeptide, but does affect significantly anchoring of the translocated polypeptide in the microsomal membrane. In contrast, changing the two cytoplasmic Lys to Glu residues or shortening of the hydrophobic core from 22 to 15 residues or converting the last 11e of the shortened hydrophobic core into Ala affects neither translocation across nor anchoring of the DPPIV polypeptide in the microsomal membrane. These and other structural features of the DPPIV amino-terminal signal-anchor sequences are discussed along with other types of sequences for their role in targeting nascent polypeptides to the RER.     

The topogenic contribution of uncharged amino acids on signal sequence orientation in the endoplasmic reticulum

Signal sequences for insertion of proteins into the endoplasmic reticulum induce translocation of either the C- or the N-terminal sequence across the membrane. The end that is translocated is primarily determined by the flanking charges and the hydrophobic domain of the signal. To characterize the hydrophobic contribution to topogenesis, we have challenged the translocation machinery in vivo in transfected COS cells with model proteins differing exclusively in the apolar segment of the signal. Homo-oligomers of hydrophobic amino acids as different in size and shape as Val(19), Trp(19), and Tyr(22) generated functional signal sequences with similar topologies in the membrane. The longer a homo-oligomeric sequence of a given residue, the more N-terminal translocation was obtained. To determine the topogenic contribution of all uncharged amino acids in the context of a hydrophobic signal sequence, two residues in a generic oligoleucine signal were exchanged for all uncharged amino acids. The resulting scale resembles a hydrophobicity scale with the more hydrophobic residues promoting N-terminal translocation. In addition, the helix breakers glycine and proline showed a position-dependent effect, which raises the possibility of a conformational contribution to topogenesis.     

Foreign transmembrane peptides replacing the internal signal sequence of transferrin receptor allow its translocation and membrane binding

Each subunit of the human transferrin receptor (TR) dimer is inserted into the ER membrane as a transmembrane polypeptide having its N-terminus in the cytoplasm. The transmembrane segment of the molecule serves both as a signal for chain translocation and as a membrane anchor. To study which structural features of this segment are required for its dual function, we have essentially replaced the transmembrane peptide with the C-terminal membrane-spanning segment of two proteins having a separate N-terminal translocation signal and with an artificial uncharged peptide. In each case the mutant TR molecules are efficiently translocated in vitro. In contrast, substitution of the transmembrane peptide of TR with a hydrophilic peptide results in no detectable translocation activity of the mutant TR. This suggests that the hydrophobic character of the transmembrane peptide of TR, rather than its actual amino acid sequence, is important for chain translocation and membrane binding.     

Stop-transfer efficiency of marginally hydrophobic segments depends on the length of the carboxy-terminal tail

Hydrophobic stop-transfer sequences generally serve to halt the translocation of polypeptide chains across the endoplasmic reticulum membrane and become integrated as transmembrane α-helices. Using engineered glycosylation sites as topology reporters, we show that the length of the nascent chain between a hydrophobic segment and the carboxy terminus of the protein can affect stop-transfer efficiency. We also show that glycosylation sites located close to a protein's C terminus are modified in two distinct kinetic phases, one fast and one slow. Our findings suggest that membrane integration of a hydrophobic segment is not simply a question of thermodynamic equilibrium, but can be influenced by details of the translocation mechanism.