Nano-mechanical Compliance of Müller Cells Investigated by Atomic Force Microscopy

It has been known that a single Müller cell displays a large variation in the cytoskeletal compositions along its cell body, suggesting different mechanical properties in different segments. Müller cells are thought to be involved in many retinal diseases such as retinoschisis, which can be facilitated by a mechanical stress. Thus, mapping of mechanical properties on localized nano-domains of Müller cells could provide essential information for understanding their structural functions in the retina and roles in their pathological progresses. Using Atomic Force Microscopy (AFM) - based bio-nano-mechanics, we have investigated the local variations of the mechanical properties of Müller cells in vitro. We have a particular interest in identifying elastic moduli in regions closer to three distinctive segments of the cells - process, endfoot, and soma. Using the modified spherical AFM probes, we were able to accurately determine mechanical properties, i.e., elastic moduli from the obtained force-distance curves. We found that the regions closer to soma were mechanically more compliant than regions closer to endfoot and process of Müller cells. We found that this lateral heterogeneity of the mechanical compliance within a single Müller cell is consistent with reports from other cell types. The local variation in mechanical compliances along a single Müller cell may support their diverse mechanical functions in the retina such as a soft mechanical embedding, mechanosensing, and neurotrophic functions for neurons.     

Imaging and measuring the rituximab-induced changes of mechanical properties in B-lymphoma cells using atomic force microscopy

The topography and mechanical properties of single B-lymphoma cells have been investigated by atomic force microscopy (AFM). With the assistance of microfabricated patterned pillars, the surface topography and ultrastructure of single living B-lymphoma cell were visualized by AFM. The apoptosis of B-lymphoma cells induced by rituximab alone was observed by acridine orange/ethidium bromide (AO/EB) double fluorescent staining. The rituximab-induced changes of mechanical properties in B-lymphoma cells were measured dynamically and the results showed that B-lymphoma cells became dramatically softer after incubation with rituximab. These results can improve our understanding of rituximab’effect and will facilitate the further investigation of the underlying mechanisms.     

Quasi-linear viscoelastic properties of costal cartilage using atomic force microscopy

Costal cartilage (CC) is one of the load-bearing tissues of the rib cage. Literature on material characterisation of the CC is limited. Atomic force microscopy (AFM) has been extremely successful in characterising the elastic properties of soft biomaterials such as articular cartilage and hydrogels, which are often the material of choice for cartilage models. But AFM data on CC are absent in the literature. In this study, AFM indentations using spherical beaded tips were performed on human CC to isolate the mechanical properties. A novel method was developed for modelling the relaxation indentation experiments based on Fung's quasi-linear viscoelasticity and a continuous relaxation spectrum. This particular model has been popular for uniaxial compression test data analysis. Using the model, the mean Young's modulus of CC was found to be about 2.17, 4.11 and 5.49 MPa for three specimens. A large variation of modulus was observed over the tissue. Also, the modulus values decreased with distance from the costochondral junction.     

Structure of human chromosomes studied by atomic force microscopy

In this work human chromosomes have been treated with RNase and pepsin to remove the layer of cellular material that covers the standard preparations on glass slides. This allows characterization of the topography of chromosomes at nanometer scale in air and in physiological solution by atomic force microscopy. Imaging of the dehydrated structure in air indicates radial arrangement of chromatin loops as the last level of DNA packing. However, imaging in liquid reveals a last level of organization consisting of a hierarchy of bands and coils. Additionally force curves between the tip and the chromosome in liquid are consistent with radial chromatin loops. These results and previous electron microscopy studies are analyzed, and a model is proposed for the chromosome structure in which radial loops and helical coils coexist.     

Indentation with atomic force microscope,Saccharomyces cerevisiae cell gains elasticity under ethanol stress

During bioethanol fermentation process, Saccharomyces cerevisiae cell membrane is the first target to be attacked by the accumulated ethanol. In such a prominent position, S. cerevisiae cell membrane could reversely provide protection through changing fluidity or elasticity secondary to remodeled membrane components or structure during the fermentation process. However, there is yet to be a direct observation of the real effect of the membrane compositional change. In this study, atomic force microscope-based strategy was performed to determine Young's modulus of S. cerevisiae to directly clarify ethanol stress-associated changes and roles of S. cerevisiae cell membrane fluidity and elasticity. Cell survival rate decreased while the cell swelling rate and membrane permeability increased as ethanol concentration increased from 0% to 20% v/v. Young's modulus decreased continuously from 3.76 MPa to 1.53 MPa while ethanol stress increased from 0% to 20% v/v, indicating that ethanol stress induced the S. cerevisiae membrane fluidity and elasticity changes. Combined with the fact that membrane composition varies under ethanol stress, to some extent, this could be considered as a forced defensive act to the ethanol stress by S. cerevisiae cells. On the other hand, the ethanol stress induced loosening of cell membrane also caused S. cerevisiae cell to proactively remodel membrane to make cell membrane more agreeable to the increase of environmental threat. Increased ethanol stress made S. cerevisiae cell membrane more fluidized and elastic, and eventually further facilitated yeast cell’s survival.     

Deformability and adhesive force of artificial platelets measured by atomic force microscopy

Platelet glycoprotein GPIaIIa is an adhesive protein that recognizes collagen. We have investigated polymerized albumin particles conjugated with recombinant GPIaIIa (rGPIaIIa-poly Alb) for their platelet-like function. To evaluate the feasibility of these particles to achieve the hemostatic process, we measured the deformability (Young’s modulus and spring constant) and the adhesive force of the particles using atomic force microscopy, which can measure the mechanical properties of individual cells. Our results showed that the Young’s modulus of these particles was 2.3-fold larger than that of natural platelets and 12-fold larger than that of human red blood cells. The Young’s modulus of the particles may have been determined by the properties of the polymerized albumin particle, although the glycoprotein of the platelet surface also contributed to the higher modulus. Our results also showed that the adhesive force of the rGPIaIIa-poly Alb with the collagen ligand was 52% of that of natural platelets. These two mechanical properties (deformability and adhesive force) of cells or particles, such as rGPIaIIa-poly Alb, are important specifications for the optimum design of platelet substitutes.     

原子力显微镜在细胞弹性研究中的应用

细胞表面的力学性质会随着细胞所处环境的不同而发生改变,它的变化间接反映出胞内复杂的生理过程。原子力显微镜（atomic force microscope,AFM）能以高的灵敏度和分辨率检测活体细胞,通过利用赫兹模型分析力曲线可以获得细胞的弹性信息。本文简介了原子力显微镜的工作原理与工作模式,着重介绍利用AFM力曲线检测细胞弹性的方法及其在细胞运动、细胞骨架、细胞黏附、细胞病理等方面的应用成果,表明AFM已经成为细胞弹性研究中十分重要的显微技术。     

In situ atomic force microscopy of partially demineralized human dentin collagen fibrils

Dentin collagen fibrils were studied in situ by atomic force microscopy (AFM). New data on size distribution and the axial repeat distance of hydrated and dehydrated collagen type I fibrils are presented. Polished dentin disks from third molars were partially demineralized with citric acid, leaving proteins and the collagen matrix. At this stage collagen fibrils were not resolved by AFM, but after exposure to NaOCl(aq) for 100-240 s, and presumably due to the removal of noncollagenous proteins, individual collagen fibrils and the fibril network of dentin connected to the mineralized substrate were revealed. High-aspect-ratio silicon tips in tapping mode were used to image the soft fibril network. Hydrated fibrils showed three distinct groups of diameters: 100, 91, and 83 nm and a narrow distribution of the axial repeat distance at 67 nm. Dehydration resulted in a broad distribution of the fibril diameters between 75 and 105 nm and a division of the axial repeat distance into three groups at 67, 62, and 57 nm. Subfibrillar features (4 nm) were observed on hydrated and dehydrated fibrils. The gap depth between the thick and thin repeating segments of the fibrils varied from 3 to 7 nm. Phase mode revealed mineral particles on the transition from the gap to the overlap zone of the fibrils. This method appears to be a powerful tool for the analysis of fibrillar collagen structures in calcified tissues and may aid in understanding the differences in collagen affected by chemical treatments or by diseases.     

Detection of coccoid forms of Sulfitobacter mediterraneus using atomic force microscopy

The adhesion of the marine alpha-Proteobacteria Sulfitobacter pontiacus, Sulfitobacter mediterraneus, Sulfitobacter brevis, and Staleya guttiformis to a poly(tert-butyl methacrylate) (PtBMA) polymeric surface generates unusual cell morphological peculiarities following attachment. While the type strains S. pontiacus and S. brevis failed to attach to PtBMA, the vegetative cells of type strain S. mediterraneus underwent morphological conversion into coccoid forms during the attachment over an incubation period of 24-72 h. Type strain St. guttiformis cells formed a multilayered biofilm on the PtBMA surface, presumably facilitated by bacterial production of extracellular polysaccharides. The attachment behavior and fine structure of these coccoid forms have been described using atomic force microscopy. The impact of polymeric surfaces of defined hydrophobicity on the formation of coccoid bodies is discussed.     

Imaging microtubules and kinesin decorated microtubules using tapping mode atomic force microscopy in fluids

The atomic force microscope has been used to investigate microtubules and kinesin decorated microtubules in aqueous solution adsorbed onto a solid substrate. The netto negatively charged microtubules did not adsorb to negatively charged solid surfaces but to glass covalently coated with the highly positively charged silane trimethoxysilylpropyldiethylenetriamine (DETA) or a lipid bilayer of 1,2-dipalmitoyl-3-dimethylammoniumpropane. Using electron beam deposited tips for microtubules adsorbed on DETA, single protofilaments could be observed showing that the resolution is up to 5 nm. Under conditions where the silane coated surfaces are hydrophobic, microtubules opened, presumably at the seam, whose stability is lower than that of the bonds between the other protofilaments. This led to a “sheet” with a width of about 100 nm firmly attached to the surface. Microtubules decorated with a stoichiometric low amount of kinesin molecules in the presence of the non-hydrolyzable ATP-analog 5′-adenylylimidodiphosphate could also be adsorbed onto silane-coated glass. Imaging was very stable and the molecules did not show any scan-induced deformation even after hundreds of scans with a scan frequency of 100 Hz. Received: 23 February 1999 / Revised version: 19 July 1999 / Accepted: 17 August 1999     

Nanoscale analysis of supported lipid bilayers using atomic force microscopy

During the past 15 years, atomic force microscopy (AFM) has opened new opportunities for imaging supported lipid bilayers (SLBs) on the nanoscale. AFM offers a means to visualize the nanoscale structure of SLBs in physiological conditions. A unique feature of AFM is its ability to monitor dynamic events, like bilayer alteration, remodelling or digestion, upon incubation with various external agents such as drugs, detergents, proteins, peptides, nanoparticles, and solvents. Here, we survey recent progress made in the area.     

Surface elastic modulus of barnacle adhesive and release characteristics from silicone surfaces

The properties of barnacle adhesive on silicone surfaces were studied by AFM indentation, imaging, and other tests and compared to the barnacle shear adhesion strength. A multilayered structure of barnacle adhesive plaque is proposed based on layered modulus regions measured by AFM indentation. The fracture of barnacles from PDMS surfaces was found to include both interfacial and cohesive failure of barnacle adhesive plaque, as determined by protein staining of the substratum after forced barnacle release from the substrate. Data for freshly released barnacles showed that there was a strong correlation between the mean Young's modulus of the outermost (softest) adhesive layer (E< 0.3 MPa) and the shear strength of adhesion, but no correlation for other higher modulus regions. Linear, quadratic, and Griffith's failure criterion (based on rough estimate of crack length) regressions were used in the fit, and showed significance.     

High-speed atomic force microscopy: Imaging and force spectroscopy

Atomic force microscopy (AFM) is the type of scanning probe microscopy that is probably best adapted for imaging biological samples in physiological conditions with submolecular lateral and vertical resolution. In addition, AFM is a method of choice to study the mechanical unfolding of proteins or for cellular force spectroscopy. In spite of 28 years of successful use in biological sciences, AFM is far from enjoying the same popularity as electron and fluorescence microscopy. The advent of high-speed atomic force microscopy (HS-AFM), about 10 years ago, has provided unprecedented insights into the dynamics of membrane proteins and molecular machines from the single-molecule to the cellular level. HS-AFM imaging at nanometer-resolution and sub-second frame rate may open novel research fields depicting dynamic events at the single bio-molecule level. As such, HS-AFM is complementary to other structural and cellular biology techniques, and hopefully will gain acceptance from researchers from various fields. In this review we describe some of the most recent reports of dynamic bio-molecular imaging by HS-AFM, as well as the advent of high-speed force spectroscopy (HS-FS) for single protein unfolding.     

Size distribution measurement of vesicles by atomic force microscopy

Vesicles have been utilized as nanoscale vehicles for reagents including potential drug delivery systems. When used to deliver drugs, vesicle size and the size distribution are important factors in the determination of the dosage, cell specificity, and rate of clearance from the body. Current size measurement techniques for vesicles are electron microscopy and dynamic light scattering, but their results are not equal. Therefore atomic force microscopy was attempted as another size measurement technique. After adsorption of the vesicles from a low-concentration solution of vesicles on mica substrate, each vesicle is generally found as a flattened structure. The diameters of vesicles in these solutions and their distribution have been successfully estimated from the surface area of the flattened structure of each vesicle. At higher concentrations, we have found a monolayer crammed with dome-shaped vesicles on the substrate. The diameters of vesicles in these solutions have also been successfully estimated from the surface area of the dome-shaped structure of each vesicle. Diameters of vesicles in solution estimated from two different vesicle concentrations are not close to those reported by electron microscope studies but are close to those reported by dynamic light scattering studies.     

Nanostructure and force spectroscopy analysis of human peripheral blood CD4+ T cells using atomic force microscopy

To date, nanoscale imaging of the morphological changes and adhesion force of CD4⁺ T cells during in vitro activation remains largely unreported. In this study, we used atomic force microscopy (AFM) to study the morphological changes and specific binding forces in resting and activated human peripheral blood CD4⁺ T cells. The AFM images revealed that the volume of activated CD4⁺ T cells increased and the ultrastructure of these cells also became complex. Using a functionalized AFM tip, the strength of the specific binding force of the CD4 antigen-antibody interaction was found to be approximately three times that of the unspecific force. The adhesion forces were not randomly distributed over the surface of a single activated CD4⁺ T cell, indicated that the CD4 molecules concentrated into nanodomains. The magnitude of the adhesion force of the CD4 antigen-antibody interaction did not change markedly with the activation time. Multiple bonds involved in the CD4 antigen-antibody interaction were measured at different activation times. These results suggest that the adhesion force involved in the CD4 antigen-antibody interaction is highly selective and of high affinity.     

Investigations into the polymorphism of rat tail tendon fibrils using atomic force microscopy

Collagen type I displays a typical banding periodicity of 67 nm when visualized by atomic force or transmission electron microscopy imaging. We have investigated collagen fibers extracted from rat tail tendons using atomic force microscopy, under different ionic and pH conditions. The majority of the fibers reproduce the typical wavy structure with 67 nm spacing and a height difference between the peak and the grooves of at least 5 nm. However, we were also able to individuate two other banding patterns with 23+/-2 nm and 210+/-15 nm periodicities. The small pattern showed height differences of about 2 nm, whereas the large pattern seems to be a superposition of the 67 nm periodicity showing height differences of about 20 nm. Furthermore, we could show that at pH values of 3 and below the fibril structure gets dissolved whereas high concentrations of NaCl and CaCl(2) could prevent this effect.     

Ultrastable atomic force microscopy: Improved force and positional stability

Atomic force microscopy (AFM) is an exciting technique for biophysical studies of single molecules, but its usefulness is limited by instrumental drift. We dramatically reduced positional drift by adding two lasers to track and thereby actively stabilize the tip and the surface. These lasers also enabled label-free optical images that were spatially aligned to the tip position. Finally, sub-pN force stability over 100 s was achieved by removing the gold coating from soft cantilevers. These enhancements to AFM instrumentation can immediately benefit research in biophysics and nanoscience.     

基于原子力显微镜测量内耳螺旋器的弹性特征

应用原子力显微镜分析内耳螺旋器(Corti器)不同部位的弹性特征。采用豚鼠内耳基底膜底回新鲜标本,用原子力显微镜在液相接触式测量,获得不同部位力曲线。经计算,对应Corti器相当于Hensen细胞、外毛细胞、柱细胞、内毛细胞、内指细胞、盖膜的部位及基底膜底面局部,其杨氏模量均值分别为46±1.7、59±0.9、250±31、140±2.8、430±29.9、210±7.2和230±8.8 kPa。结果表明,基底膜径向排列的组织结构不同,杨氏模量存在明显差异,在整块基底膜标本上测量Corti器各结构的杨氏模量能更准确地反映它们在生理状态下的弹性特征。