A glucose oxidase inmobilized electrode based on modified graphite

Glucose oxidase (E. C. 1.1.3.4) was immobilized on electrochemically modified graphite to obtain an enzyme electrode. The working surface of the electrode was coated with gelatine to prevent desorption of the enzyme. In substrate (glucose) solutions the amperometric signal of the enzyme electrode was due to the electroreduction of H202 generated in the enzyme layer. The linearity of the electrode response was found up to a substrate concentration of 300 microM at a working potential of 0 mV (vs. Ag/AgCl). It was shown that the electrode did not respond to L-ascorbic and uric acid at that working potential. The response time was about 2 min. The enzyme electrode keeps about 50% of its initial activity after a one-week storage at 4 degrees C.     

Study of xanthine oxidase immobilized electrode based on modified graphite

Xanthine oxidase (E. C. 1.2.3.2) was immobilized by adsorption on electrochemically modified graphite plate to obtain an enzyme electrode. The current of the enzyme electrode in substrate (xanthine) solutions was found to be a result of the electrooxidation of H2O2 generated in the enzyme layer. The linearity of the amperometric signal was up to a substrate concentration of 65 microM at 0.6 V (vs. Ag/AgCl). The response time was 2 minutes. The enzyme electrode preserves 80% of its initial activity after a three-week storage in air at room temperature.     

Electrochemical impedance detection of DNA hybridization based on dendrimer modified electrode

Bioactive ultrathin films with the incorporation of amino-terminated G4 PAMAM dendrimers have been prepared via layer-by-layer self-assembly methods on a gold electrode and used for the DNA hybridization analysis. Surface plasmon resonance (SPR), X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy (EIS) are used to characterize the successful construction of the multicomponent film on the gold substrate. The dendrimer-modified surfaces improve the immobilization capacity of the probe DNA greatly, compared to the AET (2-aminoethanethiol) SAM sensor surfaces without dendrimer molecules. DNA hybridization analysis is monitored by EIS. The dendrimer-based electrochemical impedance DNA biosensor shows high sensitivity and selectivity for DNA hybridization assay. The multicomponent films also display a high stability during repeated regeneration and hybridization cycles.     

Electrochemical characterization of Geobacter sulfurreducens cells immobilized on graphite paper electrodes

Bacteria able to transfer electrons to conductive surfaces are of interest as catalysts in microbial fuel cells, as well as in bioprocessing, bioremediation, and corrosion. New procedures for immobilization of Geobacter sulfurreducens on graphite electrodes are described that allow routine, repeatable electrochemical analysis of cell-electrode interactions. Immediately after immobilizing G. sulfurreducens on electrodes, electrical current was obtained without addition of exogenous electron shuttles or electroactive polymers. Voltammetry and impedance analysis of pectin-immobilized bacteria transferring electrons to electrode surfaces could also be performed. Cyclic voltammetry of immobilized cells revealed voltage-dependent catalytic current similar to what is commonly observed with adsorbed enzymes, with catalytic waves centered at -0.15 V (vs. SHE). Electrodes maintained at +0.25 V (vs. SHE) initially produced 0.52 A/m(2) in the presence of acetate as the electron donor. Electrical Impedance Spectroscopy of coatings was also consistent with a catalytic mechanism, controlled by charge transfer rate. When electrodes were maintained at an oxidizing potential for 24 h, electron transfer to electrodes increased to 1.75 A/m(2). These observations of electron transfer by pectin-entrapped G. sulfurreducens appear to reflect native mechanisms used for respiration. The ability of washed G. sulfurreducens cells to immediately produce electrical current was consistent with the external surface of this bacterium possessing a pathway linking oxidative metabolism to extracellular electron transfer. This electrochemical activity of pectin-immobilized bacteria illustrates a strategy for preparation of catalytic electrodes and study of Geobacter under defined conditions.     

Researches on chemically modified electrode. XIX. preparation of iron protoporphyrin film electrode by electrochemical polymerization and its catalysis

Using cyclic voltammetry the electrochemical polymerization of protoporphyrin (PP) and iron protoporphyrin (FePP) was investigated as radical cationic vinyl polymerization. A number of factors, such as electrode potential, temperature, and concentration of monomers in solution, may affect the rate of polymerization. The polymerized porphyrin film on electrode surface was analyzed with electronic scanning microscope, UV-visible spectroscope, and ESCA. The electrochemically polymerized FePP film glassy carbon electrode (poly(FePP)/GC) exhibits very high catalytic activity for dioxygen reduction in aqueous solution to water as a four-electron irreversible process.     

Electrochemical behavior of L-cysteine and its detection at carbon nanotube electrode modified with platinum

The electrochemical behavior of L-cysteine (CySH) on platinum (Pt)/carbon nanotube (CNT) electrode was investigated by cyclic voltammetry. CNTs used in this study were grown directly on graphite disk by chemical vapor deposition. Pt was electrochemically deposited on the activated CNT/graphite electrode by electroreduction of Pt(IV) complex ion on the surface of CNTs. Among graphite, CNT/graphite, and Pt/CNT electrodes, improved electrochemical behavior of CySH oxidation was found with Pt/CNT electrode. On the other hand, a sensitive CySH sensor was developed based on Pt/CNT/graphite electrode. A linear calibration curve can be observed in the range of 0.5 microM-0.1 mM. The detection limit of the Pt/CNT electrode is 0.3 microM (signal/nose=3). Effects of pH, scan rate, and interference of other oxidizable amino acids were also investigated and discussed. Additionally, the reproducibility, stability, and applicability of the Pt/CNT electrode were evaluated.     

Electrochemical oxidation of purine and pyrimidine bases based on the boron-doped nanotubes modified electrode

Based on the excellent physicochemical properties of boron-doped carbon nanotubes (BCNTs), the electrochemical analysis of four free DNA bases at the BCNTs modified glassy carbon (GC) electrode was investigated. Herein, the BCNTs/GC electrode exhibited remarkable electrocatalytic activity towards the oxidation of purine bases (guanine (G), adenine (A)). More significantly, the direct oxidation of pyrimidine bases (thymine (T), cytosine (C)) was realized. It may be due to that BCNTs have the advantages of high electron transfer kinetics, large surface area, prominent antifouling ability and electrode activity. On basis of this, a novel and simple strategy for the determination of G, A, T and C was proposed. The BCNTs/GC electrode showed high sensitivity, wide linear range and capability of detection for the electrochemical determination of G, A, T, and C. On the other hand, the electrochemical oxidation of quaternary mixture of G, A, T, and C at the BCNTs/GC electrode was investigated. It was obtained that the peak separation between G and A, A and T, T and C were large enough for their potential recognition in mixture without any separation or pretreatment. The BCNTs/GC electrode also displayed good stability, reproducibility and excellent anti-interferent ability. Therefore, it can be believed that the BCNTs/GC electrode would provide a potential application for the electrochemical detection of DNA in the field of genetic-disease diagnosis.     

Electrochemical synthesis of gold nanostructure modified electrode and its development in electrochemical DNA biosensor

In this article, gold nanostructure modified electrodes were achieved by a simple one-step electrodeposition method. The morphologies of modified electrodes could be easily controlled by changing the pH of HAuCl₄ solution. The novel nanoflower-like particles with the nanoplates as the building blocks could be interestingly obtained at pH 5.0. The gold nanoflower modified electrodes were then used for the fabrication of electrochemical DNA biosensor. The DNA biosensor fabrication process was characterized by cyclic voltammetry and electrochemical impedance spectroscopy with the use of ferricyanide as an electrochemical redox indicator. The DNA immobilization and hybridization on gold nanoflower modified electrode was studied with the use of [Ru(NH₃)₆]³⁺ as a hybridization indicator. The electrochemical DNA biosensor shows a good selectivity and sensitivity toward the detection of target DNA. A detection limit of 1 pM toward target DNA could be obtained.     

Electrochemical bioreactor with regeneration of NAD+ by rotating graphite disk electrode with PMS adsorbed.

Kinetic constants were compared among p-quinone, 2,6-dichlorophenolindophenol, phenazine methosulfate (PMS), methylene blue, and FAD in the oxidation of NADH. Among those, PMS was selected for its highest rate constant as a mediator for the electrochemical oxidation of NAD. The PMS could be stably immobilized on a graphite electrode surface by adsorption. The PMS adsorbed and that in the solution showed distinctly separated peaks in the cyclic voltammogram. The immobilized PMS functioned as an immobilized mediator to reduce the overpotential in the electrochemical oxidation of NAD so that the electrode could be used as an NAD regenerator. For the construction of an electrochemical bioreactor, a specially designed rotating disk graphite electrode was used. In spite of its extraordinarily large surface area, the behavior of the rotating disc electrode was described well by the Levich law. The NAD oxidation system of the rotating graphite disk electrode with PMS adsorbed was combined with glucose-6-phosphate dehydrogenase reaction, which reduced NAD with the consumption of glucose-6-phosphate. The electrochemical bioreactor system worked well with recycling of NAD at a high current efficiency.     

Electrochemical study of the interaction between cytochrome c and DNA at a modified gold electrode

The direct electron transfer of surface-confined horse heart cytochrome c (Cyt c) was achieved using COOH-terminated alkanethiolate-modified gold electrode. Later DNA was immobilized on the two-layer modified electrode. The quantitative determination of DNA was explored and the interaction between cytochrome c and DNA was studied. The binding site sizes were determined to be 15 bp per Cyt c molecule with double-stranded (ds) DNA and 30 nucleotides binding one Cyt c molecule with single-stranded (ss) DNA. At the dsDNA/Cyt c/MUA/Au electrode, the rate constant of oxidation electron transfer k(s,ox)=1.59x10(-3)cms-1 was obtained, at the ssDNA/Cyt c/MUA/Au electrode, the value was 2.43x10(-3)ms-1 when the scan rate was 1.0V/s. The different electrodes were characterized with electrochemical quartz crystal microbalance and atomic force microscope.     

Reduced graphene oxide/PAMAM-silver nanoparticles nanocomposite modified electrode for direct electrochemistry of glucose oxidase and glucose sensing

Reduced graphene oxide/PAMAM-silver nanoparticles nanocomposite (RGO-PAMAM-Ag) was synthesized by self-assembly of carboxyl-terminated PAMAM dendrimer (PAMAM-G3.5) on graphene oxide (GO) as growing template, and in-situ reduction of both AgNO(3) and GO under microwave irradiation. The RGO-PAMAM-Ag nanocomposite was used as a novel immobilization matrix for glucose oxidase (GOD) and exhibited excellent direct electron transfer properties for GOD with the rate constant (K(s)) of 8.59 s(-1). The fabricated glucose biosensor based on GOD electrode modified with RGO-PAMAM-Ag nanocomposite displayed satisfactory analytical performance including high sensitivity (75.72 μA mM(-1) cm(-2)), low detection limit (4.5 μM), an acceptable linear range from 0.032 mM to 1.89 mM, and also preventing the interference of some interfering species usually coexisting with glucose in human blood at the work potential of -0.25 V. These results indicated that RGO-PAMAM-Ag nanocomposite is a promising candidate material for high-performance glucose biosensors.     

Structural and thermal stability characterization of Escherichia coli D-galactose/D-glucose-binding protein

The effect of temperature and glucose binding on the structure of the galactose/glucose-binding protein from Escherichia coli was investigated by circular dichroism, Fourier transform infrared spectroscopy, and steady-state and time-resolved fluorescence. The data showed that the glucose binding induces a moderate change of the secondary structure content of the protein and increases the protein thermal stability. The infrared spectroscopy data showed that some protein stretches, involved in alpha-helices and beta strand conformations, are particularly sensitive to temperature. The fluorescence studies showed that the intrinsic tryptophanyl fluorescence of the protein is well represented by a three-exponential model and that in the presence of glucose the protein adopts a structure less accessible to the solvent. The new insights on the structural properties of the galactose/glucose-binding protein can contribute to a better understanding of the protein functions and represent fundamental information for the development of biotechnological applications of the protein.     

Electrochemical behaviors of amino acids at multiwall carbon nanotubes and Cu2O modified carbon paste electrode

A carbon paste electrode modified with multiwall carbon nanotubes and copper(I) oxide (MWCNT-Cu₂O CPME) was fabricated, and the electrochemical behaviors of 19 kinds of natural amino acids at this modified electrode were studied. The experimental results showed that the various kinds of amino acids without any derivatization displayed obvious oxidation current responses at the modified electrode. It was also found that the current response values of amino acids were dependent mainly on pH values of buffer solutions. The phenomenon could be explained by the fact that the amino acids suffered complexation or electrocatalytic oxidation processes under different pH values. Six kinds of amino acids (arginine, tryptophan, histidine, threonine, serine, and tyrosine), which performed high-oxidation current responses in alkaline buffers, were selected to be detected simultaneously by capillary zone electrophoresis coupled with amperometric detection (CZE-AD). These amino acids could be perfectly separated within 20 min, and their detection limits were as low as 10⁻⁷ or 10⁻⁸ mol L⁻¹ magnitude (signal/noise ratio = 3). The above results demonstrated that MWCNT-Cu₂O CPME could be successfully employed as an electrochemical sensor for amino acids with some advantages of convenient preparation, high sensitivity, and good repeatability.     

Electrochemical impedimetric immunosensor for insulin like growth factor-1 using specific monoclonal antibody-nanogold modified electrode

An electrochemical impedimetric immunosensor was developed for ultrasensitive determination of insulin-like growth factor-1 (IGF-1) based on immobilization of a specific monoclonal antibody on gold nanoparticles (GNPs) modified gold electrode. Self-assembly of colloidal gold nanoparticles on the gold electrode was conducted through the thiol groups of 1,6-hexanedithiol (HDT) monolayer as a cross linker. The redox reactions of [Fe(CN)(6)](4-)/[Fe(CN)(6)](3-) on the electrode surface was probed for studying the immobilization and determination processes, using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The interaction of antigen with grafted antibody recognition layer was carried out by soaking the modified electrode into antigen solution at 37°C for 3 h. The immunosensor showed linearity over 1.0-180.0 pg mL(-1) and the limit of detection was 0.15 pg mL(-1). The association constant between IGF-1 and immobilized antibody was calculated to be 9.17×10(11) M(-1). The proposed method is a useful tool for screening picogram amounts of IGF-1 in clinical laboratory as a diagnostic test.     

Studies on the electrochemical performance of glucose biosensor based on ferrocene encapsulated ORMOSIL and glucose oxidase modified graphite paste electrode

The electrochemical performance of a new glucose biosensor is reported. The glucose biosensor is developed using glucose oxidase (GOD) and ferrocene encapsulated palladium (Pd)-linked organically modified sol-gel glass (ORMOSIL) material incorporated within graphite paste electrode. The ORMOSIL material incorporated within graphite paste electrode behaves as an excellent electrocatalyst for the oxidation of enzymatically reduced GOD. The electrochemical behavior of new glucose biosensor has been examined by cyclic volammetry and amperometric measurements. The bioelectrocatalysis of ORMOSIL embedded within graphite paste as a function of storage time and varying concentration of ORMOSIL is reported. The initial amperometric response on glucose sensing is recorded to be 145 microA at 15% (w/w) concentration of the ORMOSIL which is decreased to 20 microA at 5% of the same keeping GOD concentration constant. The variation of electrochemical behavior of the ORMOSIL embedded within graphite paste as a function of time has also been studied based on cyclic voltammetry. The voltammograms showing the reversible electrochemistry of ORMOSIL encapsulated ferrocene is changed into a plateau shape as a function of time, however, the electrocatalytic behavior is still retained. The practical usability of new glucose sensor has been compared with earlier developed glucose sensor. The sensitivity, response time and linearity of the new glucose biosensor are found to be excellent over earlier reported glucose biosensor. The amperometric response, calibration curve and practical applications of new glucose sensor are reported.     

Smoothing of the thermal stability of DNA duplexes by using modified nucleosides and chaotropic agents

The effect of alkyltrimethylammonium ions on the thermostability of natural and modified DNA duplexes has been investigated. We have shown that the use of tetramethylammonium ions TMA+along with the chemical modification of duplexes allow the fine adjustment of T m and the possibility of obtaining several duplex systems with varied isostabilizedtemperatures, some of which show greater stability than those of natural DNA. This approach could be very useful for DNA sequencing by hybridization.     

Electrochemical selective determination of ascorbic acid at redox active polymer modified electrode derived from direct blue 71

A simple selective method for determination of ascorbic acid using polymerized direct blue 71 (DB71) is described. Anodic polymerization of the azo dye DB71 on glassy carbon (GC) electrode in 0.1M H(2)SO(4) acidic medium was found to yield thin and stable polymeric films. The poly(DB71) films were electroactive in wide pH range (1-13). A pair of symmetrical redox peaks at a formal redox potential, E('0)=-0.02V vs. Ag/AgCl (pH 7.0) was observed with a Nernstian slope -0.058V, is attributed to a 1:1 proton+electron involving polymer redox reactions at the modified electrode. Scanning electron microscope (SEM), atomic force microscope (AFM) and electrochemical impedance spectroscopy (EIS) measurements were used for surface studies of polymer modified electrode. Poly(DB71) modified GC electrode showed excellent electrocatalytic activity towards ascorbic acid in neutral buffer solution. Using amperometric method, linear range (1x10(-6)-2x10(-3)M), dynamic range (1x10(-6)-0.01M) and detection limit (1x10(-6)M, S/N=3) were estimated for measurement of ascorbic acid in pH 7.0 buffer solution. Major interferences such as dopamine and uric acid are tested at this modified electrode and found that selective detection of ascorbic acid can be achieved. This new method successfully applied for determination of ascorbic acid in commercial tablets with satisfactory results.     

Construction of an amperometric TG biosensor based on AuPPy nanocomposite and poly (indole-5-carboxylic acid) modified Au electrode

A method is described for construction of an amperometric triglyceride (TG) biosensor based on covalent co-immobilization of lipase, glycerol kinase and glycerol-3-phosphate oxidase onto gold polypyrrole nanocomposite decorated poly indole-5-carboxylic acid electrodeposited on the surface of a gold electrode. The enzyme electrode was characterized by transmission electron microscopy, scanning electron microscopy, electrochemical impedance studies, Fourier transform infrared spectroscopy and cyclic voltammetry. Biosensor showed optimum response within 4 s at pH 6.5 and 35 °C, when polarized at +0.1 V against Ag/AgCl. There was a linear relationship between sensor response and triolein concentration in the range 50–700 mg/dl. Biosensor was employed for determination of TG in serum. Detection limit of the biosensor was 20 mg/dl. Biosensor was evaluated with 91–95 % recovery of added triolein in sera and 4.14 and 5.85 % within and between batch coefficients of variation, respectively. There was a good correlation (r = 0.99) between sera TG values by standard method (Enzymic colorimetric) and the present method. The biosensor was unaffected by a number of serum substances at their physiological concentration. Biosensor lost 50 % of its initial activity after its 100 uses over 7 months, when stored at 4 °C.     

An amperometric lactate biosensor based on lactate dehydrogenase immobilized onto graphene oxide nanoparticles‐modified pencil graphite electrode

A novel amperometric lactate biosensor was developed based on immobilization of lactate dehydrogenase onto graphene oxide nanoparticles‐decorated pencil graphite electrode. The enzyme electrode was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy (FTIR), and cyclic voltammetry at different stages of its construction. The biosensor showed optimum response within 5 s at pH 7.3 (0.1 M sodium phosphate buffer) and 35°C, when operated at 0.7 V. The biosensor exhibited excellent sensitivity (detection limit as low as 0.1 μM), fast response time (5 s), and wider linear range (5–50 mM). Analytical recovery of added lactic acid in serum was between 95.81–97.87% and within‐batch and between‐batch coefficients of variation were 5.04 and 5.40%, respectively. There was a good correlation between serum lactate values obtained by standard colorimetric method and the present biosensor (r = 0.99). The biosensor measured lactate levels in sera of apparently healthy subjects and persons suffering from lactate acidosis and other biological materials (milk, curd, yogurt, beer, white wine, and red wine). The enzyme electrode lost 25% of its initial activity after 60 days of its regular uses, when stored dry at 4°C.     

Electrochemical performance of 8-hydroxy-2'-deoxyguanosine and its detection at poly(3-methylthiophene) modified glassy carbon electrode

8-Hydroxy-2'-deoxyguanosine (8-OH-dG) has attracted enormous attention in recent years because it has been acknowledged as a typical biomarker of oxidative DNA damage. In this paper, the electrochemical performance of 8-OH-dG at the poly(3-methylthiophene) (P3MT) modified glassy carbon electrode (GCE) was investigated by cyclic voltammetry (CV) and linear sweep voltammetry (LSV). The conducting polymer P3MT can effectively decrease the oxidation peak potential of 8-OH-dG and greatly enhance its peak current. In 0.1 M pH 7.0 phosphate buffer solution (PBS), the anodic peak currents of cyclic voltammograms are linear with the 8-OH-dG concentration in two intervals, viz. 0.700-35.0 microM and 35.0-70.0 microM, with the correlative coefficients of 0.9992 and 0.9995, respectively. The detection limit of 8-OH-dG can be estimated to be 0.100 microM (S/N=3). This modified electrode can be used to detect the amount of 8-OH-dG in human urine. Furthermore, the effects of scan rate, pH, and interference of uric acid (UA) for the voltammetric behavior and detection of 8-OH-dG are also discussed. This proposed modified electrode also shows excellent reproducibility and stability that makes it an ideal candidate for amperometric detection of 8-OH-dG in flow injection analysis (FIA) and high performance liquid chromatography (HPLC).