Continuous protein separations in a magnetically stabilized fluidized bed using nonmagnetic supports

Continuous protein separations were performed using a magnetically stabilized fluidized bed (MSFB) and a commercially available affinity adsorption resin that contained no magnetically susceptible material. These nonmagnetic materials can be stabilized at relatively low fields (<75 G requiring <30 W) if sufficient magnetically susceptible particles are also present in the stabilized bed. The minimum amount of magnetic particles necessary to stabilize the bed is as low as 20% by volume and is a function of various parameters including the size and density of both particles, the magnetic field strength, and the fluidization velocity. Advantages of these beds for performing separations include true continuous, countercurrent liquid-solids contact, mass-transfer efficiencies nearly equal to that of packed beds, and the ability of handle suspended cells or cell debris. A variety of commercially available affinity, ion-exchange, and adsorptive supports can be used in the bed for continuous separations; results are presented for the adsorption and recovery of lysozyme from an aqueous mixture of lysozyme and myoglobin using an affinity resin.     

磁细菌与细菌磁颗粒的特点及应用研究

概述了磁细菌的特点及由磁细菌所产生的细菌磁颗粒的晶体成分、形态特征、磁颗粒膜的特点以及细菌磁颗粒在信息贮存、磁性细胞制备、基因研究、生物活性物质载体、免疫检测以及在污水处理、矿物分选等方面的应用研究。     

Cell tracking velocimetry as a tool for defining saturation binding of magnetically conjugated antibodies.

BACKGROUND: Continuous flow immunomagnetic separation is an attractive alternative to current batch mode immunomagnetic separation methods because it is capable of high sorting speeds at mild cell conditions, and grants the operator better control of separation process. The control of the separation is dependent on knowledge of the amount of magnetic label attached to the cell (magnetic labeling intensity), however. Determination of the magnetic labeling is accomplished by measuring cell magnetophoretic mobility using a newly developed technique of Cell Tracking Velocimetry (CTV). METHODS: Flow cytometry was used to define the antibody binding characteristics of a fluorescently tagged primary antibody. Subsequently, CTV was used to measure antibody-binding characteristics of a magnetically tagged secondary antibody. RESULTS: The results of this study show that CTV is capable of providing valuable information concerning the cell labeling by magnetically tagged antibodies. It was demonstrated that the magnetically conjugated antibody binding curve exhibits the same exponential increase to saturation characteristics as that seen with the fluorescently tagged antibody. Further, it was shown that the intensity of the secondary magnetic labeling is directly proportional to the intensity of the primary fluorescent label. CONCLUSIONS: CTV is an accurate tool for evaluation of magnetically conjugated antibodies. The ability to determine the intensity of magnetic labeling is necessary for the development of continuous flow immunomagnetic separations based on cell magnetophoresis.     

Magnetic techniques for the isolation and purification of proteins and peptides

Isolation and separation of specific molecules is used in almost all areas of biosciences and biotechnology. Diverse procedures can be used to achieve this goal. Recently, increased attention has been paid to the development and application of magnetic separation techniques, which employ small magnetic particles. The purpose of this review paper is to summarize various methodologies, strategies and materials which can be used for the isolation and purification of target proteins and peptides with the help of magnetic field. An extensive list of realised purification procedures documents the efficiency of magnetic separation techniques.     

Magnetic aqueous two-phase separation in preparative applications.

Magnetic aqueous two-phase separation is a new technique to speed up the separation of aqueous two-phase systems (Anal. Biochem. 1987, 167, 331-339). It is based on the addition of magnetically susceptible material (e.g. 1-micron iron oxide particles) which induces rapid phase separation when a mixed system is placed in a magnetic field. The technique has been applied to a number of two-phase systems. The time for phase separation was decreased by a factor of 5-240,000, with the largest improvement for systems containing high concentrations of protein and for systems with viscous or nearly isopycnic phases. An apparatus for preparative multistage extraction with magnetic separation was constructed and tested on glycolytic enzymes present in a yeast extract using a dextran/Cibacron blue-polyethylene glycol system. The presence of iron oxide particles did not adversely affect the extracted enzymes. An electromagnet-based apparatus for continuous phase separation on a larger scale was also designed. A phase system containing crude dextran and unpurified cell homogenate was effectively processed. The apparatus also allowed effective separation when the phase containing iron oxide particles was only a small fraction (4%) of the total phase system.     

Tat peptide-derivatized magnetic nanoparticles allow in vivo tracking and recovery of progenitor cells

The ability to track the distribution and differentiation of progenitor and stem cells by high-resolution in vivo imaging techniques would have significant clinical and research implications. We have developed a cell labeling approach using short HIV-Tat peptides to derivatize superparamagnetic nanoparticles. The particles are efficiently internalized into hematopoietic and neural progenitor cells in quantities up to 10-30 pg of superparamagnetic iron per cell. Iron incorporation did not affect cell viability, differentiation, or proliferation of CD34+ cells. Following intravenous injection into immunodeficient mice, 4% of magnetically CD34+ cells homed to bone marrow per gram of tissue, and single cells could be detected by magnetic resonance (MR) imaging in tissue samples. In addition, magnetically labeled cells that had homed to bone marrow could be recovered by magnetic separation columns. Localization and retrieval of cell populations in vivo enable detailed analysis of specific stem cell and organ interactions critical for advancing the therapeutic use of stem cells.     

High-efficiency intracellular magnetic labeling with novel superparamagnetic-Tat peptide conjugates

A biocompatible, dextran coated superparamagnetic iron oxide particle was derivatized with a peptide sequence from the HIV-tat protein to improve intracellular magnetic labeling of different target cells. The conjugate had a mean particle size of 41 nm and contained an average of 6.7 tat peptides. Derivatized particles were internalized into lymphocytes over 100-fold more efficiently than nonmodified particles, resulting in up to 12.7 x 10(6) particles/cell. Internalized particles localized in cytoplasm and nuclear compartments as demonstrated by fluorescence microscopy and immunohistochemistry. Labeled cells were highly magnetic, were detectable by NMR imaging, and could be retained on magnetic separation columns. The described method has potential applications for in vivo tracking of magnetically labeled cells by MR imaging and for recovering intracellularly labeled cells from organs.     

Magnetic separations in biotechnology

Magnetic separations are probably one of the most versatile separation processes in biotechnology as they are able to purify cells, viruses, proteins and nucleic acids directly from crude samples. The fast and gentle process in combination with its easy scale-up and automation provide unique advantages over other separation techniques. In the midst of this process are the magnetic adsorbents tailored for the envisioned target and whose complex synthesis spans over multiple fields of science. In this context, this article reviews both the synthesis and tailoring of magnetic adsorbents for bioseparations as well as their ultimate application.     

Agglomeration behaviour of magnetic microparticles during separation and recycling processes in mRNA purification

Purification of mRNA with oligo(dT)‐functionalized magnetic particles involves a series of magnetic separations for buffer exchange and washing. Magnetic particles interact and agglomerate with each other when a magnetic field is applied, which can result in a decreased total surface area and thus a decreased yield of mRNA. In addition, agglomeration may also be caused by mRNA loading on the magnetic particles. Therefore, it is of interest how the individual steps of magnetic separation and subsequent redispersion in the buffers used affect the particle size distribution. The lysis/binding buffer is the most important buffer for the separation of mRNA from the multicomponent suspension of cell lysate. Therefore, monodisperse magnetic particles loaded with mRNA were dispersed in the lysis/binding buffer and in the reference system deionized water, and the particle size distributions were measured. A concentration‐dependent agglomeration tendency was observed in deionized water. In contrast, no significant agglomeration was detected in the lysis/binding buffer. With regard to magnetic particle recycling, the influence of different storage and drying processes on particle size distribution was investigated. Agglomeration occurred in all process alternatives. For de‐agglomeration, ultrasonic treatment was examined. It represents a suitable method for reproducible restoration of the original particle size distribution.     

Cell separation by expanded bed adsorption: use of ion exchange chromatography for the separation of <Emphasis Type="Italic">E. coli</Emphasis> and <Emphasis Type="Italic">S. cerevisiae</Emphasis>

In a wide variety of biotechnological and medical applications it is necessary to separate different cell populations from one another. A promising approach to cell separations is demonstrated to be the adoption of chromatographic techniques conducted in expanded beds. The high voidage between the adsorbent beads in an expanded bed allows for the efficient capture of particulate entities such as cells together with washing and subsequent elution without entrapment and loss. In addition, the combination of a gentle hydrodynamic environment, a high surface area and low mixing within the expanded bed make this technique highly favourable. A model system for the separation of two types of microbial cells using STREAMLINE DEAE adsorbent in expanded bed procedures has been investigated. The use of a less selective ligand such as an ion exchange group, which is often characterised by gentle elution procedures, has been investigated as an alternative to affinity ligands whose strong binding characteristics can result in harsh elution procedures with consequent loss of yield and cell viability. Expanded bed experiments have demonstrated selective and high capacity capture of cells from feedstocks containing either a single type of cell or as a mixture of cells of Saccharomyces cerevisiae and Eschericia coli. The capture, washing and elution phases of the separation have been studied with respect to capacity, selectivity and yield of released cells. In these procedures, separation of cell types is achieved by the presence of multiple equilibrium stages within the expanded bed. The results show the potential for carrying out cell separations in expanded beds as an alternative to immunomagnetic cell separations. The combination of these recently developed technologies promises to be a powerful, but economic technique for cell separations involving simple equipment that can readily be scaled up.     

Purification of recombinant enhanced green fluorescent protein expressed in Escherichia coli with new immobilized metal ion affinity magnetic absorbents

A new immobilized metal ion affinity (IMA) adsorbent containing superparamagnetic nanoparticles and coated with hydrophilic resins are proposed here to improve the purification of His-tagged proteins. The magnetic chelating resin was prepared by radical polymerization of magnetite (Fe3O4), styrene, divinyl benzene (DVB) and glycidyl methacrylate-iminodiacetic acid (GMA-IDA) in ethanol/water medium. IDA is immobilized on magnetite as a ligand and pre-charged Cu2+, Zn2+ and Ni2+ as metal ions. To identify the GMA-IDA magnetic particles easily, we named these particles MPGI. The MPGI adsorbent was used to test their suitability for the direct recovery of an intracellular, polyhistidine-tagged protein, enhanced green fluorescent protein [EGFP-(His)(6)], from Escherichia coli lysates in a single step. Parameters influencing the purification efficiencies such as pH, ionic strength and imidazole concentration were optimized to achieve improved separation. The optimal selectively was observed in binding buffer (0.2M NaCl, 0.02M imidazole), washing buffer (0.4M NaCl, 0.03 M imidazole) and elution buffer (0.50M imidazole). The Cu2+-charged MPGI adsorbent had the highest yield and purification factor at 70.4% and 12.3, respectively. The calculated isotherm parameters (Q(m)=53.5 mg/g, K(d)=5.84 mg/mL and Q(m)/K(d)=9.2 mL/g) indicated that the MPGI adsorbent could be used as a suitable adsorbent for EGFP from an aqueous solution.     

Protein separations using colloidal magnetic nanoparticles

Phospholipid-coated colloidal magnetic nanoparticles with mean magnetite core size of 8 nm are shown to be effective ion exchange media for the recovery and separation of proteins from protein mixtures. These particles have high adsorptive capacities (up to 1200 mg protein/mL adsorbent, an order of magnitude larger than the best commercially available adsorbents) and exhibit none of the diffusional resistances offered by conventional porous ion exchange media. Protein-laden particles are readily recovered from the feed solution using high-gradient magnetic filtration.     

Magnetic separation techniques: their application to medicine

Summary Whilst separation techniques relying on gravitational forces have become relatively sophisticated in their application to biology the same is not true for magnetic separation procedures. The use of the latter has been limited to the few cells which contain paramagnetic iron. However with the development of several different types of magnetic particles and selective delivery system (e.g. monoclonal antibodies) the use of magnetic separation techniques is growing rapidly. This review describes the different types of particles currently available, the magnetic separation technique applied to the different magnetic compounds and illustrates major uses to which magnetic separation procedures are currently applied in the area of biology and medicine.Abbreviations WBC White blood cells - RBC Red blood cells - Met-Hb Methemoglobin - SRBC Sheep red blood cells - Ig Immunoglobulin - FACS Fluorescent activated cell sorter     

Magnetic chitosan composite particles: Evaluation of thorium and uranyl ion adsorption from aqueous solutions

Magnetic chitosan composite particles with 40 μm average size and 24 emu/g saturation magnetization obtained by an in situ procedure were evaluated as a new low-cost adsorbent for radioactive wastewater decontamination. Sorbent characterization by SEM, EDX, FTIR and magnetization measurements proved that the target ions were bound and their surface distribution was uniform. The 18 emu/g magnetization of the metal loaded particles was high enough to ensure their easy magnetic field separation and recovery. The parameters influencing the sorption process were optimized with respect to sorbent mass, target ion concentration and contact time. The material under study had superior adsorption capacity both for uranyl (666.67 mg/g) and thorium (312.50 mg/g) ions when compared to other low-cost adsorbents reported in literature. The adsorption process is spontaneous and endothermic. The material may be regenerated and re-used.     

Separation methodology to improve proteome coverage depth

So-called ‘in-depth proteomics’ and its applied separation methodology to improve the proteome coverage depth has become an important issue in mass spectrometric-based proteomics and system-wide cell biology studies. Employing a bottom-up approach and a variety of separation techniques, it allows for identification of proteins with low copy numbers and enables researchers to correlate the number of expressed genes in a cell with the proteome. Here we describe recent advances in this field with emphasis on peptide and protein separation technologies. The discussion is focused both on single injection analyses employing long reversed phase liquid chromatography separations of peptides (‘single shot proteomics’) and on the combination of orthogonal protein and peptide separation methods to achieve maximum protein coverage. Owing to these improvements, in-depth proteomics has now fully entered the field and is being implemented in an increasing number of laboratories.     

Strategy for selection of methods for separation of bioparticles from particle mixtures

The desired product of bioprocesses is often produced in particulate form, either as an inclusion body (IB) or as a crystal. Particle harvesting is then a crucial and attractive form of product recovery. Because the liquid phase often contains other bioparticles, such as cell debris, whole cells, particulate biocatalysts or particulate by-products, the recovery of product particles is a complex process. In most cases, the particulate product is purified using selective solubilization or extraction. However, if selective particle recovery is possible, the already high purity of the particles makes this downstream process more favorable. This work gives an overview of typical bioparticle mixtures that are encountered in industrial biotechnology and the various driving forces that may be used for particle-particle separation, such as the centrifugal force, the magnetic force, the electric force, and forces related to interfaces. By coupling these driving forces to the resisting forces, the limitations of using these driving forces with respect to particle size are calculated. It shows that centrifugation is not a general solution for particle-particle separation in biotechnology because the particle sizes of product and contaminating particles are often very small, thus, causing their settling velocities to be too low for efficient separation by centrifugation. Examples of such separation problems are the recovery of IBs or virus-like particles (VLPs) from (microbial) cell debris. In these cases, separation processes that use electrical forces or fluid-fluid interfaces show to have a large potential for particle-particle separation. These methods are not yet commonly applied for large-scale particle-particle separation in biotechnology and more research is required on the separation techniques and on particle characterization to facilitate successful application of these methods in industry.     

Magnetic field design for selecting and aligning immunomagnetic labeled cells

BACKGROUND: Recently we introduced the CellTracks cell analysis system, in which samples are prepared based on a combination of immunomagnetic selection, separation, and alignment of cells along ferromagnetic lines. Here we describe the underlying magnetic principles and considerations made in the magnetic field design to achieve the best possible cell selection and alignment of magnetically labeled cells. Materials and Methods Computer simulations, in combination with experimental data, were used to optimize the design of the magnets and Ni lines to obtain the optimal magnetic configuration. RESULTS: A homogeneous cell distribution on the upper surface of the sample chamber was obtained with a magnet where the pole faces were tilted towards each other. The spatial distribution of magnetically aligned objects in between the Ni lines was dependent on the ratio of the diameter of the aligned object and the line spacing, which was tested with magnetically and fluorescently labeled 6 microm polystyrene beads. The best result was obtained when the line spacing was equal to or smaller than the diameter of the aligned object. CONCLUSIONS: The magnetic gradient of the designed permanent magnet extracts magnetically labeled cells from any cell suspension to a desired plane, providing a homogeneous cell distribution. In addition, it magnetizes ferro-magnetic Ni lines in this plane whose additional local gradient adds to the gradient of the permanent magnet. The resultant gradient aligns the magnetically labeled cells first brought to this plane. This combination makes it possible, in a single step, to extract and align cells on a surface from any cell suspension.     

Conceptual design of a cellular filter to remove trace viral contaminants in blood.

Various process alternatives and designs of using a filter containing cellular adsorbents to remove trace viral contaminants from blood and other protein solutions have been studied. Sterilization charts have been developed that can be used to estimate the filter size required to achieve a desired sterilization criterion. A parametric study was carried out to identify various process parameters that may affect this physical trace removal process. It has been demonstrated that the adsorption rate constant is a critical parameter in the design of an efficient cellular filter for viral contaminant removal. This constant is characteristic of the virus-cell system under consideration and is shown to be particularly sensitive to the cell surface receptor density, adsorbent diameter, and fluid flow rate. Higher log titer reduction in virus concentrations can be achieved with low flow rates and no recycle. Preliminary analyses indicate the feasibility of using a magnetically stabilized fluidized filter (MSFF) reactor design for effective virus removal from these complex solutions.     

One‐step magnetic modification of yeast cells by microwave‐synthesized iron oxide microparticles

Baker's yeast (Saccharomyces cerevisiae) cells were magnetically modified with magnetic iron oxide particles prepared by microwave irradiation of iron(II) sulfate at high pH. The modification procedure was very simple and fast. Both non‐cross‐linked and glutaraldehyde cross‐linked magnetic cells enabled efficient sucrose conversion into glucose and fructose, due to the presence of active intracellular invertase. The prepared magnetic whole‐cell biocatalyst was stable; almost the same catalytic activity was observed after 1‐month storage at 4°C. Simple magnetic separation and stability of the developed biocatalyst enabled its reusability without significant loss of enzyme activity.

Significance and Impact of the Study

Magnetic whole yeast cell biocatalyst containing intracellular invertase in its natural environment has been prepared. Magnetic properties enable its easy separation from reaction mixture. Magnetically modified Saccharomyces cerevisiae cells have been used for invert sugar production, hydrolysing sucrose into glucose and fructose. The described magnetization procedure employing microwave‐synthesized iron oxide microparticles is a low‐cost and easy‐to‐perform alternative to already existing magnetization techniques.     

Comparing recovering efficiency of immunomagnetic separation and centrifugation of mycobacteria in metalworking fluids

The accurate detection and enumeration of Mycobacterium immunogenum in metalworking fluids (MWFs) is imperative from an occupational health and industrial fluids management perspective. We report here a comparison of immunomagnetic separation (IMS) coupled to flow-cytometric enumeration, with traditional centrifugation techniques for mycobacteria in a semisynthetic MWF. This immunolabeling involves the coating of laboratory-synthesized nanometer-scale magnetic particles with protein A, to conjugate a primary antibody (Ab), specific to Mycobacterium spp. By using magnetic separation and flow-cytometric quantification, this approach enabled much higher recovery efficiency and fluorescent light intensities in comparison to the widely applied centrifugation technique. This IMS technique increased the cell recovery efficiency by one order of magnitude, and improved the fluorescence intensity of the secondary Ab conjugate by 2-fold, as compared with traditional techniques. By employing nanometer-scale magnetic particles, IMS was found to be compatible with flow cytometry (FCM), thereby increasing cell detection and enumeration speed by up to two orders of magnitude over microscopic techniques. Moreover, the use of primary Ab conjugated magnetic nanoparticles showed better correlation between epifluorescent microscopy counts and FCM analysis than that achieved using traditional centrifugation techniques. The results strongly support the applicability of the flow-cytometric IMS for microbial detection in complex matrices.