Mechanism of the interaction of hydrophobically-modified poly-(N-isopropylacrylamides) with liposomes

Interactions of hydrophobically-modified poly-(N-isopropylacrylamides) (HM PNIPAM) with phospholipid liposomes were studied as a function of the lipid type, the lipid bilayer fluidity, and the polymer conformation. Fluorescence experiments monitoring non-radiative energy transfer (NRET), between naphthalene attached to the HM PNIPAM and 1,6-diphenyl-1,3,5-hexatriene (DPH) incorporated into the lipid bilayer, confirmed the direct penetration of hydrophobic anchor groups linked to the polymer into the liposome hydrophobic core. Contraction of the polymer backbone above the lower critical solution temperature (LCST) resulted in a partial withdrawal of the anchor groups from the lipid bilayer. Analysis of polymer/lipid mixtures by centrifugation and quasi-elastic light scattering (QELS) revealed the polymer-induced fission of liposomes in the liquid-crystalline state, resulting in the formation of vesicles 150–230 nm in diameter. The process is reversible and upon transition of the bilayer into the gel state these vesicles are converted into larger aggregates. According to the results of gel-filtration experiments the HM PNIPAM is in dynamic exchange between the liquid-crystalline lipid bilayer and the water solution, while the binding to the bilayer in the gel state is more static in nature. The binding constant for mixture of HM PNIPAM with DMPC liposomes, evaluated from the centrifugation experiments, was found to be 120 M⁻¹.     

Liposomes as carriers of polyfunctional immunogens

Liposomes are promising carriers for construction of the up-to-date chemical vaccinal preparations. The immunogenic and immunomodulating properties of liposomes may be varied by incorporation of the natural or synthetic immunomodulators into the inner water volume or into the lipid bilayer parallel with antigens as well as by introduction of the receptor-specific vector to definite types of immunocompetent cells into liposomes. The pronounced immunobiological properties of the liposomal carrier are shown in studies of liposomes conjugated with haptens or model protein antigens. The application of liposomes as carriers of bacterial antigens induces a delayed catabolism of the antigen and formation of its depot. The immunomodulating properties of antigen-containing liposomes rise after introduction of such immunomodulators as lipid A, muramyldipeptide or interleukin-1 into the liposome composition.     

Functional reconstitution of the integral membrane proteins of influenza virus into phospholipid liposomes

The integral membrane proteins of influenza virus, a hemagglutinin and a neuraminidase, have been incorporated into liposomes composed of either phosphatidylcholine or a mixture of phosphatidylcholine and phosphatidylethanolamine (2:1 w/w) using detergent dialysis. The virus spike glycoproteins for reconstitution were selectively solubilized by using cetyltrimethylammonium bromide to leave a "core particle", which lacked a lipid bilayer but possessed quaternary structure as observed by electron microscopy. The viral spike proteins were combined with exogenous phospholipid in excess sodium cholate followed by exhaustive dialysis for 150 h. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that only the viral glycoproteins were associated with all the complexes formed. The level of sodium cholate remaining after dialysis was shown to be reduced to less than 1 molecule per 80 protein molecules. Viral proteins reconstituted into dimyristoylphosphatidylcholine liposomes were shown to have retained hemagglutination, low-pH-dependent hemolysis, and neuraminidase activities and were associated with a lipid bilayer in two types of complexes with average lipid to protein mole ratios after sucrose density gradient purification of either 590:1 or 970:1. The bilayer vesicles formed were of similar sizes and were shown by negative-stain electron microscopy to be 150-300 nm in diameter with well-defined spikes on their surface. Reconstituted liposomes of dimyristoylphosphatidylcholine were found to be unstable with respect to their trapped volume and therefore were unsuitable for fusion studies, unlike complexes formed with phosphatidylcholine or a mixture of phosphatidylcholine/phosphatidylethanolamine derived from hen eggs.(ABSTRACT TRUNCATED AT 250 WORDS)     

Lipid-alginate interactions render changes in phospholipid bilayer permeability

Lipid vesicles, e.g. liposomes, generally release their contents in a continuous manner. However, when these vesicles are entrapped in Ca-alginate and coated with poly(L-lysine), they release their contents in an unusual fashion, in 'bursts'. Molecular-level studies indicated that lipid-alginate interactions are responsible for changes in the barrier properties of lipid vesicles. Differential scanning calorimetry revealed that exposure of liposomes to alginate resulted in a 4-fold reduction in the phase transition enthalpy, with no change in the melting temperature. Size-exclusion chromatography of liposomes-in-alginate gave an additional liposomal peak with a smaller elution volume. These studies suggested that alginate is inserted into the lipid bilayer of vesicles. Lipid-alginate interactions were highly dependent on phospholipid head group charge and the phase transition temperature of the phospholipid. Based on these interactions, a mechanism to explain the 'burst' from these entrapped liposomes is suggested.     

Properties of a self-assembled phospholipid membrane supported on lipobeads

The overall objective of our work was to make a hydrogel-supported phospholipid bilayer that models a cytoskeleton-supported cell membrane and provides a platform for studying membrane biology. Previously, we demonstrated that a pre-Lipobead, consisting of phospholipids covalently attached to the surface of a hydrogel, could give rise to a Lipobead when incubated with liposomes because the attached phospholipids promote self-assembly of a phospholipid membrane on the pre-Lipobead. We now report the properties of that Lipobead membrane. The lateral diffusion coefficient of fluorescently labeled phosphatidylcholine analogs in the membrane was measured by fluorescence recovery after photobleaching and was found to decrease as the surface anchor density and hydrogel crosslinking density increased. Results from the quenching of phosphatidylcholine analogs suggest that the phospholipid membrane of the Lipobead was composed mostly of a semipermeable lipid bilayer. However, the diffusional barrier properties of the Lipobead membrane were demonstrated by the entrapment of 1.5-3.0 K dextran molecules in the hydrogel core after liposome fusion. This hydrogel-supported bilayer membrane preparation shows promise as a new platform for studying membrane biology and for high throughput drug screening.     

Nanoparticles evading the reticuloendothelial system: Role of the supported bilayer

We have previously shown that the PEGylated LPD (liposome-polycation-DNA) nanoparticles were highly efficient in delivering siRNA to the tumor with low liver uptake. Its mechanism of evading the reticuloendothelial system (RES) is reported here. In LPD, nucleic acids were condensed with protamine into a compact core, which was then coated by two cationic lipid bilayers with the inner bilayer stabilized by charge-charge interaction (also called the supported bilayer). Finally, a detergent-like molecule, polyethylene glycol (PEG)-phospholipid is post-inserted into the lipid bilayer to modify the surface of LPD. The dynamic light scattering (DLS) data showed that LPD had improved stability compared to cationic liposomes after incubation with a high concentration of DSPE-PEG₂₀₀₀, which is known to disrupt the bilayer. LPD prepared with a multivalent cationic lipid, DSGLA, had enhanced stability compared to those containing DOTAP, a monovalent cationic lipid, suggesting that stronger charge-charge interaction in the supported bilayer contributed to a higher stability. Distinct nanoparticle structure was found in the PEGylated LPD by transmission electron microscopy, while the cationic liposomes were transformed into tubular micelles. Size exclusion chromatography data showed that approximately 60% of the total cationic lipids, which were located in the outer bilayer of LPD, were stripped off during the PEGylation; and about 20% of the input DSPE-PEG₂₀₀₀ was incorporated into the inner bilayer with about 10.6 mol% of DSPE-PEG₂₀₀₀ presented on the particle surface. This led to complete charge shielding, low liver sinusoidal uptake, and 32.5% injected dose delivered to the NCI-H460 tumor in a xenograft model.     

Permeability of bilayer phospholipid membranes to superoxide oxygen radicals

Lecithin monolayer liposomes (1000 A in diameter) loaded with cytochrome c were placed into the external solution, in which O2 superoxide radicals were regenerated by the xanthine-xanthine oxidase system. The penetration of superoxide radicals across the liposomal membranes was followed by cytochrome c reduction in the interval volume of the liposomes. The effects of lipid membrane modifiers and temperature on this process were investigated. The results obtained were used for calculation of the permeability coefficients of bilayer lipid membranes for O(2) (P'O(2) = (7.6 +/- 0.3) . 10(-8) cm . s-1) or HO . 2(P'HO(2) = 4.9 x 10(-4) cm . s-1). The effect of the transmembrane electric potential (concentration gradient of H+, valinomycin) on the permeability of liposomal membranes for the superoxide radical was studied. The superoxide radical was down to penetrate across the bilayer lipid membranes in an unloaded state. Using an intramolecular cholesterol-amphotericin B-complex, the superoxide radicals were shown to penetrate across the bilayer lipid membranes, predominantly via the anionic channels.     

Characterization of the surfaces generated by liposome binding to the modified dextran matrix of a surface plasmon resonance sensor chip

The dextran matrix of a surface plasmon resonance (SPR) sensor chip modified with hydrophobic residues (BIAcore sensor chip L1) provides an ideal substrate for liposome adsorption. Liposomes of different lipid compositions are captured on the sensor chips by inserting these residues into the liposome membrane, thereby generating stable lipid surfaces. To gain a more detailed understanding of these surfaces, and to prove whether the liposomes stay on the matrix as single particles or form a continuous lipid layer by liposome fusion, we have investigated these materials, using atomic force microscopy (AFM) and fluorescence microscopy. Force measurements with AFM probes functionalized with bovine serum albumin (BSA) were employed to recognize liposome adsorption. Analysis of the maximal adhesive force and adhesion energy reveals a stronger interaction between BSA and the dextran matrix compared to the lipid-covered surfaces. Images generated using BSA-coated AFM tips indicated a complete and homogeneous coverage of the surface by phospholipid. Single liposomes could not be detected even at lower lipid concentrations, indicating that the liposomes fuse and form a lipid bilayer on the dextran matrix. Experiments with fluorescently labeled liposomes concurred with the AFM studies. Surfaces incubated with liposomes loaded with TRITC-labeled dextran showed no fluorescence, indicating a complete release of the encapsulated dye. In contrast, surfaces incubated with liposomes containing a fluorescently labeled lipid showed fluorescence.     

Reconstitution of the receptor for immunoglobulin E into liposomes. Reincorporation of purified receptors

Mast cells and related cells have on their surface receptors that bind immunoglobulin E (IgE) with high affinity and which, when aggregated, trigger exocytosis. We recently demonstrated that when these receptors are solubilized with mild detergents, their subunits dissociate unless an appropriate lipid:detergent ratio is maintained. The conditions required to maintain the receptors' integrity appeared to parallel those previously determined as necessary to obtain adequate incorporation of unpurified IgE-receptor complexes from detergent extracts into liposomes. We now show that purified IgE-receptor complexes having the full complement of subunits become preferentially inserted into liposomes. If the receptor subunits are chemically cross-linked to each other, at least some of such receptors can be incorporated, even though lipid is omitted during their purification. The findings suggest that the IgE-binding alpha subunit of the receptor is anchored to the bilayer by means of one or both of the other subunits.     

S-layer-supported lipid membranes

Many prokaryotic organisms (archaea and bacteria) are covered by a regularly ordered surface layer (S-layer) as the outermost cell wall component. S-layers are built up of a single protein or glycoprotein species and represent the simplest biological membrane developed during evolution. Pores in S-layers are of regular size and morphology, and functional groups on the protein lattice are aligned in well-defined positions and orientations. Due to the high degree of structural regularity S-layers represent unique systems for studying the structure, morphogenesis, and function of layered supramolecular assemblies. Isolated S-layer subunits of numerous organisms are able to assemble into monomolecular arrays either in suspension, at air/water interfaces, on planar mono- and bilayer lipid films, on liposomes and on solid supports (e.g. silicon wafers). Detailed studies on composite S-layer/lipid structures have been performed with Langmuir films, freestanding bilayer lipid membranes, solid supported lipid membranes, and liposomes. Lipid molecules in planar films and liposomes interact via their head groups with defined domains on the S-layer lattice. Electrostatic interactions are the most prevalent forces. The hydrophobic chains of the lipid monolayers are almost unaffected by the attachment of the S-layer and no impact on the hydrophobic thickness of the membranes has been observed. Upon crystallization of a coherent S-layer lattice on planar and vesicular lipid membranes, an increase in molecular order is observed, which is reflected in a decrease of the membrane tension and an enhanced mobility of probe molecules within an S-layer-supported bilayer. Thus, the terminology 'semifluid membrane' has been introduced for describing S-layer-supported lipid membranes. The most important feature of composite S-layer/lipid membranes is an enhanced stability in comparison to unsupported membranes.     

Which physical and structural factors of liposome carriers control their drug-loading efficiency?

The correlation between structural and physical properties of lipid membrane and its drug-loading efficiency were studied. The properties of bilayer were altered by incorporation of several lipidic modifiers: cholesterol, oleic acid, methyl oleate, and pegylated lipid. By using the molecular probe technique it was demonstrated that the membrane properties, such as micropolarity, microviscosity and free volume were considerably changed by incorporation of the modifiers. The partitioning of two different porphyrins between the bulk aqueous phase and the modified liposomes was studied using the fluorescence methods, and liposome-binding constants were determined. It was found that cholesterol reduced the partitioning of both porphyrins into liposomal bilayer. On the contrary, the incorporation of methyl oleate and pegylated lipid causes a pronounced increase in the value of the binding constants of both porphyrins. It was concluded that the free volume rather than hydrophobicity of bilayer is a governing factor in the solute partitioning into lipid bilayers.     

Structure of planar membrane formed from liposomes

Lipid vesicles with incorporated ion channels from polyene antibiotic amphotericin B were used to investigate structures of planar membranes formed by Shindler's techniques. A planar membrane assembled on the aperture in a lavsan film from two layers generated at the air-aqueous liposome suspension interface is not a simple bilayer but a bimolecular membrane containing numerous partly fused liposomes. A complete fusion of liposomal membranes with the planar bilayer is an unlikely event during membrane formation. A planar bimolecular lipid membrane without incorporated liposomes can be made by a method consisting of three stages: formation of a lipid layer on the air-water interface of a suspension containing liposomes, transfer of this layer along the surface of the solution into a chamber containing a solution without liposomes where a lipid monomolecular layer forms gradually (within about 20 min) at the air-water interface, assembling of the planar bilayer membrane from this monolayer. The knowledge of the planar membrane structure may be useful in experiments on incorporation of membrane proteins into a planar lipid bilayer.     

The mode of action of polyacetylene and thiophene photosensitizers on liposome permeability to glucose

The mode of action of the two photosensitizers 1-phenylhepta-1,3,5-triyne and alpha-terthienyl on membrane permeability was investigated using liposomes entrapped with glucose as a model membrane system. Upon exposure to UV-A light, alpha-terthienyl, and to a much lesser extent phenylheptatriyne, induced leakage of glucose via a photodynamic mechanism in liposomes which had a high degree of unsaturated fatty acid side chains. Enhanced permeability to glucose in these liposomes due to the action of alpha-terthienyl and phenylheptatriyne involved lipid peroxidation, but neither of the two assays used to monitor lipid peroxidation (malondialdehyde and peroxide formation) was directly correlated with the increase in liposome permeability. In liposomes with highly ordered lipid where the fatty acid side chains are saturated, alpha-terthienyl had no effect on glucose permeability. In contrast, phenylheptatriyne was very effective in increasing glucose permeability in these liposomes via a photodynamic mechanism. Addition of lysophosphatidylcholine, which perturbs the order of lipid packing, to these liposomes, completely inhibited the effect of phenylheptatriyne. Conversely, incorporation of cholesterol which increases lipid order, into egg PC liposomes, enhanced the action of phenylheptatriyne. These data suggest that under UV-A irradiation (a) alpha-terthienyl and phenylheptatriyne enhance permeability in liposomes with a high degree of unsaturation involving lipid peroxidation and (b) phenylheptatriyne enhances membrane permeability through some other mechanism when present in a bilayer with a highly ordered lipid environment.     

Interaction of multicomponent anionic liposomes with cationic pyridylphenylene dendrimer: Does the complex behavior depend on the liposome composition?

Dendrimers are individual macromolecular compounds having a great potential for biomedical application. The key step of the cell penetration by dendrimers is the interaction with lipid bilayer. Here, the interaction between cationic pyridylphenylene dendrimer of third generation (D₃⁵⁰⁺) and multicomponent liquid (CL/POPC), solid (CL/DPPC) and cholesterol-containing (CL/POPC/30% Chol) anionic liposomes was investigated by dynamic light scattering, fluorescence spectroscopy, conductometry, calorimetric studies and molecular dynamic (MD) simulations. Microelectrophoresis and MD simulations revealed the interaction is electrostatic and reversible with only part of pyridinium groups of dendrimers involved in binding with liposomes. The ability of dendrimer molecules to migrate between liposomes was discovered by the labeling liposomes with Rhodamine B. The phase state of the lipid membrane and the incorporation of cholesterol into the lipid bilayer were found to not affect the mechanism of the dendrimer - liposome complex formation. Rigid dendrimer adsorption on liposomal surface does not induce the formation of significant defects in the lipid membrane pave the way for possible biological application of pyridylphenylene dendrimers.     

Incorporation of influenza virus M-protein into liposomes.

M-protein from influenza virus vaccine was purified by sodium dodecyl sulfate-gel chromatography and incorporated into liposomes by solubilization with octylglucoside and subsequent dialysis. Liposomes containing M-protein formed a distinct population with a density of 1.22 g/ml on sucrose-gradient centrifugation, regardless of the net charge on the liposomes. Treatment of the liposomes by freeze-fracture followed by electron microscopic examination showed multilamellar structures in those liposomes without M-protein; liposomes containing M-protein were mulberry-like structures which appeared unilamellar. These studies show incorporation of M-protein into the lipid bilayer.     

Ultradeformable lipid vesicles can penetrate the skin and other semi-permeable barriers unfragmented. Evidence from double label CLSM experiments and direct size measurements

The stability of various aggregates in the form of lipid bilayer vesicles was tested by three different methods before and after crossing different semi-permeable barriers. First, polymer membranes with pores significantly smaller than the average aggregate diameter were used as the skin barrier model; dynamic light scattering was employed to monitor vesicle size changes after barrier passage for several lipid mixtures with different bilayer elasticities. This revealed that vesicles must adapt their size and/or shape, dependent on bilayer stability and elasto-mechanics, to overcome an otherwise confining pore. For the mixed lipid aggregates with highly flexible bilayers (Transfersomes®), the change is transient and only involves vesicle shape and volume adaptation. The constancy of ultradeformable vesicle size before and after pores penetration proves this. This is remarkable in light of the very strong aggregate deformation during an enforced barrier passage. Simple phosphatidylcholine vesicles, with less flexible bilayers, lack such capability and stability. Conventional liposomes are therefore fractured during transport through a semi-permeable barrier; as reported by other researchers, liposomes are fragmented to the size of a narrow pore if sufficient pressure is applied across the barrier; otherwise, liposomes clog the pores. The precise outcome depends on trans-barrier flux and/or on relative vesicle vs. pore size. Lipid vesicles applied on the skin behave accordingly. Mixed lipid vesicles penetrate the skin if they are sufficiently deformable. If this is the case, they cross inter-cellular constrictions in the organ without significant composition or size modification. To prove this, we labelled vesicles with two different fluorescent markers and applied the suspension on intact murine skin without occlusion. The confocal laser scanning microscopy (CLSM) of the skin then revealed a practically indistinguishable distribution of both labels in the stratum corneum, corroborating the first assumption. To confirm the second postulate, we compared vesicle size in the starting suspension and in the blood after non-invasive transcutaneous aggregate delivery. Size exclusion chromatograms of sera from the mice that received ultradeformable vesicles on the skin were undistinguishable from the results measured with the original vesicle suspension. Taken together, the results support our previous postulate that ultradeformable vesicles penetrate the skin intact, that is, without permanent disintegration.     

The mode of action of polyacetylene and thiophene photosensitizers on liposome permeability to glucose

The mode of action of the two photosensitizers 1-phenylhepta-1,3,5-triyne and α-terthienyl on membrane permeability was investigated using liposomes entrapped with glucose as a model membrane system. Upon exposure to UV-A light, α-terthienyl, and to a much lesser extent phenylheptatriyne, induced leakage of glucose via a photodynamic mechanism in liposomes which had a high degree of unsaturated fatty acid side chains. Enhanced permeability to glucose in these liposomes due to the action of α-terthienyl and phenylheptatriyne involved lipid peroxidation, but neither of the two assays used to monitor lipid peroxidation (malondialdehyde and peroxide formation) was directly correlated with the increase in liposome permeability. In liposomes with highly ordered lipid where the fatty acid side chains are saturated, α-terthienyl had no effect on glucose permeability. In contrast, phenylheptatriyne was very effective in increasing glucose permeability in these liposomes via a photodynamic mechanism. Addition of lysophosphatidylcholine, which perturbs the order of lipid packing, to these liposomes, completely inhibited the effect of phenylheptatriyne. Conversely, incorporation of cholesterol which increases lipid order, into egg PC liposomes, enhanced the action of phenylheptatriyne. These data suggest that under UV-A irradiation (a) α-terthienyl and phenylheptatriyne enhance permeability in liposomes with a high degree of unsaturation involving lipid peroxidation and (b) phenylheptatriyne enhances membrane permeability through some other mechanism when present in a bilayer with a highly ordered lipid environment.     

Amine spin probe permeability in sonicated liposomes

Summary Permeabilities for an homologous series of amine nitroxide spin probes were measured in liposomes of varying composition by an electron paramagnetic resonance (EPR) method. Results show that the rate-limiting step in permeation is not adsorption/desorption at the aqueous/membrane interface for two probes in phosphatidylcholine/phosphatidic acid liposomes and for one probe in phosphatidylcholine/cholesterol/phosphatidic acid liposomes. Accordingly, we interpret observed selectivity patterns for the entire series of probes in liposomes and red cells in terms of the properties of the bilayer interior.Results are inconsistent with simple applications of either free volume or hydrocarbon sheet models of nonelectrolyte permeation. In the former case, it was found that liposomes do not select against these probes on the basis of molecular volume. In the latter case, probe permeabilities are all much lower than would be predicted for a sheet of bulk hydrocarbon and the polarity of the rate-limiting region is shown to be greater than bulk hydrocarbon. Together with the results of previous studies of spin-labeled solutes in membranes, as well as studies of lipid dynamics in membranes, these latter results suggest that the rate-limiting region in nonelectrolyte permeation is not in the center of the bilayer, but in the relatively ordered acyl chain segments near the glycerol backbone.     

Detection of antibodies neutralizing the endotoxins of gram-negative bacteria using the liposomal potentiometric method

For the first time the study of the indicator system consisting of sensitized liposomes with NaF incorporated as a marker and a fluorine-selective electrode has been made and, as a result, the possibility of the potentiometric determination of the immune lysis of liposomes in the presence of complement and specific antibodies has been demonstrated. The dissolution of the lipid components (Re-chemotype glycolipid and lipid A) in the bilayer matrix obviates the necessity for converting lipid antigens into the water-soluble state in the process of serological tests. As compared with other methods, the liposomal potentiometric method for the determination of Re-chemotype glycolipid and lipid A is highly sensitive (20-40 ng/ml), rapid, technically easy to perform, cheap and does not require large volumes of samples. The disadvantages of this analytical system are the instability of liposomes and the diffusion of fluorine ions from the internal aqueous phase of vesicules. For this reason the immunoassay can be made only within 12 hours after the preparation of sensitized liposomes incorporating the marker.     

Ca<Superscript>2+</Superscript>-Induced Phase Separation in the Membrane of Palmitate-Containing Liposomes and Its Possible Relation to Membrane Permeabilization

A Ca(2+)-induced phase separation of palmitic acid (PA) in the membrane of azolectin unilamellar liposomes has been demonstrated with the fluorescent membrane probe nonyl acridine orange (NAO). It has been shown that NAO, whose fluorescence in liposomal membranes is quenched in a concentration-dependent way, can be used to monitor changes in the volume of lipid phase. The incorporation of PA into NAO-labeled liposomes increased fluorescence corresponding to the expansion of membrane. After subsequent addition of Ca(2+), fluorescence decreased, which indicated separation of PA/Ca(2+) complexes into distinct membrane domains. The Ca(2+)-induced phase separation of PA was further studied in relation to membrane permeabilization caused by Ca(2+) in the PA-containing liposomes. A supposition was made that the mechanism of PA/Ca(2+)-induced membrane permeabilization relates to the initial stage of Ca(2+)-induced phase separation of PA and can be considered as formation of fast-tightening lipid pores due to chemotropic phase transition in the lipid bilayer.