Hydrogels as extracellular matrix mimics for 3D cell culture

Methods for culturing mammalian cells ex vivo are increasingly needed to study cell and tissue physiology and to grow replacement tissue for regenerative medicine. Two‐dimensional culture has been the paradigm for typical in vitro cell culture; however, it has been demonstrated that cells behave more natively when cultured in three‐dimensional environments. Permissive, synthetic hydrogels and promoting, natural hydrogels have become popular as three‐dimensional cell culture platforms; yet, both of these systems possess limitations. In this perspective, we discuss the use of both synthetic and natural hydrogels as scaffolds for three‐dimensional cell culture as well as synthetic hydrogels that incorporate sophisticated biochemical and mechanical cues as mimics of the native extracellular matrix. Ultimately, advances in synthetic–biologic hydrogel hybrids are needed to provide robust platforms for investigating cell physiology and fabricating tissue outside of the organism. Biotechnol. Bioeng. 2009;103: 655–663. © 2009 Wiley Periodicals, Inc.     

Transmural flow bioreactor for vascular tissue engineering

Nutrient transport limitation remains a fundamental issue for in vitro culture of engineered tissues. In this study, perfusion bioreactor configurations were investigated to provide uniform delivery of oxygen to media equivalents (MEs) being developed as the basis for tissue‐engineered arteries. Bioreactor configurations were developed to evaluate oxygen delivery associated with complete transmural flow (through the wall of the ME), complete axial flow (through the lumen), and a combination of these flows. In addition, transport models of the different flow configurations were analyzed to determine the most uniform oxygen profile throughout the tissue, incorporating direct measurements of tissue hydraulic conductivity, cellular O₂ consumption kinetics, and cell density along with ME physical dimensions. Model results indicate that dissolved oxygen (DO) uniformity is improved when a combination of transmural and axial flow is implemented; however, detrimental effects could occur due to lumenal pressure exceeding the burst pressure or damaging interstitial shear stress imparted by excessive transmural flow rates or decreasing hydraulic conductivity due to ME compaction. The model was verified by comparing predicted with measured outlet DO concentrations. Based on these results, the combination of a controlled transmural flow coupled with axial flow presents an attractive means to increase the transport of nutrients to cells within the cultured tissue to improve growth (increased cell and extracellular matrix concentrations) as well as uniformity. Biotechnol. Bioeng. 2009; 104: 1197–1206. © 2009 Wiley Periodicals, Inc.     

Surface‐directed assembly of cell‐laden microgels

Cell‐laden microscale hydrogels (microgels) can be used as tissue building blocks and assembled to create 3D tissue constructs with well‐defined microarchitecture. In this article, we present a bottom‐up approach to achieve microgel assembly on a patterned surface. Driven by surface tension, the hydrophilic microgels can be assembled into well‐defined shapes on a glass surface patterned with hydrophobic and hydrophilic regions. We found that the cuboidic microgels (～100–200 µm in width) could self‐assemble into defined shapes with high fidelity to the surface patterns. The microgel assembly process was improved by increasing the hydrophilicity of the microgels and reducing the surface tension of the surrounding solution. The assembled microgels were stabilized by a secondary crosslinking step. Assembled microgels containing cells stained with different dyes were fabricated to demonstrate the application of this approach for engineering microscale tissue constructs containing multiple cell types. This bottom‐up approach enables rapid fabrication of cell‐laden microgel assemblies with pre‐defined geometrical and biological features, which is easily scalable and can be potentially used in microscale tissue engineering applications. Biotechnol. Bioeng. 2010; 105: 655–662. © 2009 Wiley Periodicals, Inc.     

Effects of puromycin and cycloheximide on properties of cells from Xenopus laevis early embryos

The effects have been studied of puromycin and cycloheximide on the reaggregation of ectoderm cells dissociated from Xenopus laevis blastulae. Puromycin or cycloheximide can inhibit reaggregation, suggesting that cell reassociation is dependent upon protein synthesis. If the cells are allowed a 3 h 'recovery' period in culture medium following dissociation, before being exposed to either puromycin or cycloheximide, higher concentrations of the inhibitors are required to prevent cell aggregation, suggesting that significant synthesis of the proteins required for reaggregation occurs in the 3 h immediately following dissociation. Lower concentrations of puromycin permit cell reaggregation but reduce the normal formation of cilia. The effects have also been observed of puromycin on the scanning electron microscopical appearance of Xenopus blastula ectoderm cells cultured singly in vitro. Puromycin reduces the normal formation of pseudopodia, suggesting that puromycin might inhibit reaggregation partly by inhibiting cell movement. Puromycin also produces some elongated cells, possibly by inhibition of cytokinesis.     

Inhibition of the integrin signal constitutes a mouse iPS cell niche

Stem cells are regulated by their surrounding microenvironments, called niche, such as cell–cell interaction and extracellular matrix. Classically, feeder cells as a niche have been used in the culture of iPS cells from both the mouse and the human. However, the regulation mechanism of stem cells by feeder cells as a niche still have been partially unclear. In this study, we used three murine iPS cell lines, iPS‐MEF‐Ng‐20D‐17, iPS‐MEF‐Ng‐178B‐5 and iPS‐MEF‐Fb/Ng‐440A‐3, which were generated by different reprogramming methods. In general, these cell lines commonly need the feeder cells as a niche to culture. Recently, the effect of substrate stiffness is known in stem cell study. First, we focused on the mechanical properties of feeder cells, and then we speculated that feeder‐less culture might be made possible by using molecules in place of the mechanical properties of the niche. Finally, we found that the combination of disintegrin (echistatin) and 2i (GSK3 inhibitor and MEK inhibitor) is a sufficient condition for three murine iPS culture. This novel method of mimicking the murine iPS cell niche may be useful to understand signaling pathways to maintain the pluripotency of stem cells.     

Creation of arrays of cell aggregates in defined patterns for developmental biology studies using dielectrophoresis

It is shown that dielectrophoresis—the movement of particles in non‐uniform electric fields—can be used to create engineered skin with artificial placodes of different sizes and shapes, in different spatial patterns. Modeling of the electric field distribution and image analysis of the cell aggregates produced showed that the aggregation is highly predictable. The cells in the aggregates remain viable, and reorganization and compaction of the cells in the aggregates occurs when the artificial skin is subsequently cultured. The system developed could be of considerable use for the in vitro study of developmental processes where local variations in cell density and direct cell–cell contacts are important. Biotechnol. Bioeng. 2010;105: 945–954. © 2009 Wiley Periodicals, Inc.     

Rapid optimization of protein freeze‐drying formulations using ultra scale‐down and factorial design of experiment in microplates

Retaining biopharmaceutical proteins in a stable form is critical to their safety and efficacy, and is a major factor for optimizing the final product. Freeze‐dried formulations offer one route for improved stability. Currently the optimization of formulations for freeze‐drying is an empirical process that requires many time‐consuming experiments and also uses large quantities of product material. Here we describe a generic framework for the rapid identification and optimization of formulation excipients to prevent loss of protein activity during a lyophilization process. Using factorial design of experiment (DOE) methods combined with lyophilization in microplates a range of optimum formulations were rapidly identified that stabilized lactose dehydrogenase (derived from Lactobacillus leichmanii) during freeze‐drying. The procedure outlined herein involves two rounds of factorially designed experiments—an initial screen to identify key excipients and potential interactions followed by a central composite face designed optimization experiment. Polyethylene glycol (PEG) and lactose were shown to have significant effects on maintaining protein stability at the screening stage and optimization resulted in an accurate model that was used to plot a window of operation. The variation of freezing temperatures and rates of sublimation that occur across a microplate during freeze‐drying have been characterized also. The optimum formulation was then freeze‐dried in stoppered vials to verify that the microscale data was relevant to the effects observed at larger pilot scales. This work provides a generic approach to biopharmaceutical formulation screening where possible excipients can be screened for single and interactive effects thereby increasing throughput while reducing costs in terms of time and materials. Biotechnol. Bioeng. 2009; 104: 957–964. © 2009 Wiley Periodicals, Inc.     

Patterning of diverse mammalian cell types in serum free medium with photoablation

Integration of living cells with novel microdevices requires the development of innovative technologies for manipulating cells. Chemical surface patterning has been proven as an effective method to control the attachment and growth of diverse cell populations. Patterning polyelectrolyte multilayers through the combination of layer‐by‐layer self‐assembly technique and photolithography offer a simple, versatile, and silicon compatible approach that overcomes chemical surface patterning limitations, such as short‐term stability and low‐protein adsorption resistance. In this study, direct photolithographic patterning of two types of multilayers, PAA (poly acrylic acid)/PAAm (poly acryl amide) and PAA/PAH (poly allyl amine hydrochloride), were developed to pattern mammalian neuronal, skeletal, and cardiac muscle cells. For all studied cell types, PAA/PAAm multilayers behaved as a cytophobic surface, completely preventing cell attachment. In contrast, PAA/PAH multilayers have shown a cell‐selective behavior, promoting the attachment and growth of neuronal cells (embryonic rat hippocampal and NG108‐15 cells) to a greater extent, while providing little attachment for neonatal rat cardiac and skeletal muscle cells (C2C12 cell line). PAA/PAAm multilayer cellular patterns have also shown a remarkable protein adsorption resistance. Protein adsorption protocols commonly used for surface treatment in cell culture did not compromise the cell attachment inhibiting feature of the PAA/PAAm multilayer patterns. The combination of polyelectrolyte multilayer patterns with different adsorbed proteins could expand the applicability of this technology to cell types that require specific proteins either on the surface or in the medium for attachment or differentiation, and could not be patterned using the traditional methods. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Novel method for fabrication of skeletal muscle construct from the C2C12 myoblast cell line using serum‐free medium AIM‐V

We have fabricated muscle tissue from murine myoblast cell line C2C12 by modifying the previously reported method. Fabrication of skeletal muscle tissue has been performed in many ways including the use of a biodegradable scaffold, a collagen gel‐embedded culture, or cell sheet tissue engineering, but the extent of tension generation remains low. Recently, a new skeletal muscle tissue engineering technique involving self‐dissociation of a cell sheet from a laminin‐coated polydimethylsiloxane surface was reported which mostly involved a primary cell culture or co‐culture of C2C12 and 10T1/2 cells. In this study, we succeeded in fabricating muscle tissue using C2C12 cells alone by enhancing cell–cell attachment by the use of serum‐free medium AIM‐V. C2C12 cells were seeded on to a laminin‐coated PDMS surface in a 35 mm culture dish with two silk sutures of 5 mm in length each pinned at two places 18 mm apart. Then, cells were allowed to differentiate in AIM‐V, and the cells started to dissociate in a sheet‐like manner after 5–8 days of differentiation. The cells remained attached to the silk sutures, and tissue having a cylindrical morphology was fabricated. After the cylindrical morphology had been obtained, the medium was changed to DMEM supplemented with 2% horse serum, followed by culture for an additional 5–8 days for maturation. Tissue fabricated using this method was excitable with electric pulse stimulation and the generated active tension was approximately 1.4× greater than that reported previously for a co‐culture of C2C12 and 10T1/2 cells. Immuno‐fluorescence study revealed the presence of a sarcomere structure within the fabricated tissue, and Western blotting confirmed the expression of muscle specific‐proteins. The increased active tension generation compared to that with the previously reported method is probably attributable to the increased proportion of myogenic cells in the tissue. Myooid fabricated from mono‐culture of C2C12 will be useful in the muscle study, especially in the area where gene modification is needed. Biotechnol. Bioeng. 2009;103: 1034–1041. © 2009 Wiley Periodicals, Inc.     

Spheroids from adipose‐derived stem cells exhibit an miRNA profile of highly undifferentiated cells

Two‐dimensional (2D) cell cultures have been extensively used to investigate stem cell biology, but new insights show that the 2D model may not properly represent the potential of the tissue of origin. Conversely, three‐dimensional cultures exhibit protein expression patterns and intercellular junctions that are more representative of their in vivo condition. Multiclonal cells that grow in suspension are defined as “spheroids,” and we have previously demonstrated that spheroids from adipose‐derived stem cells (S‐ASCs) displayed enhanced regenerative capability. With the current study, we further characterized S‐ASCs to further understand the molecular mechanisms underlying their stemness properties. Recent studies have shown that microRNAs (miRNAs) are involved in many cellular mechanisms, including stemness maintenance and proliferation, and adipose stem cell differentiation. Most studies have been conducted to identify a specific miRNA profile on adherent adipose stem cells, although little is still known about S‐ASCs. In this study, we investigate for the first time the miRNA expression pattern in S‐ASCs compared to that of ASCs, demonstrating that cell lines cultured in suspension show a typical miRNA expression profile that is closer to the one reported in induced pluripotent stem cells. Moreover, we have analyzed miRNAs that are specifically involved in two distinct moments of each differentiation, namely early and late stages of osteogenic, adipogenic, and chondrogenic lineages during long‐term in vitro culture. The data reported in the current study suggest that S‐ASCs have superior stemness features than the ASCs and they represent the true upstream stem cell fraction present in adipose tissue, relegating their adherent counterparts.     

The bifunctional SDF‐1‐AnxA5 fusion protein protects cardiac function after myocardial infarction

Stromal cell‐derived factor‐1 (SDF‐1) is a well‐characterized cytokine that protects heart from ischaemic injury. However, the beneficial effects of native SDF‐1, in terms of promoting myocardial repair, are limited by its low concentration in the ischaemic myocardium. Annexin V (AnxA5) can precisely detect dead cells in vivo. As massive cardiomyocytes die after MI, we hypothesize that AnxA5 can be used as an anchor to carry SDF‐1 to the ischaemic myocardium. In this study, we constructed a fusion protein consisting of SDF‐1 and AnxA5 domains. The receptor competition assay revealed that SDF‐1‐AnxA5 had high binding affinity to SDF‐1 receptor CXCR4. The treatment of SDF‐1‐AnxA5 could significantly promote phosphorylation of AKT and ERK and induce chemotactic response, angiogenesis and cell survival in vitro. The binding membrane assay and immunofluorescence revealed that AnxA5 domain had the ability to specifically recognize and bind to cells injured by hypoxia. Furthermore, SDF‐1‐AnxA5 administered via peripheral vein could accumulate at the infarcted myocardium in vivo. The treatment with SDF‐1‐AnxA5 attenuated cell apoptosis, enhanced angiogenesis, reduced infarcted size and improved cardiac function after mouse myocardial infarction. Our results suggest that the bifunctional SDF‐1‐AnxA5 can specifically bind to dead cells. The systemic administration of bifunctional SDF‐1‐AnxA5 effectively provides cardioprotection after myocardial infarction.     

The effect of continuous culture on the growth and structure of tissue‐engineered cartilage

The use of bioreactors for cartilage tissue engineering has become increasingly important as traditional batch‐fed culture is not optimal for in vitro tissue growth. Most tissue engineering bioreactors rely on convection as the primary means to provide mass transfer; however, convective transport can also impart potentially unwanted and/or uncontrollable mechanical stimuli to the cells resident in the construct. The reliance on diffusive transport may not necessarily be ineffectual as previous studies have observed improved cartilaginous tissue growth when the constructs were cultured in elevated volumes of media. In this study, to approximate an infinite reservoir of media, we investigated the effect of continuous culture on cartilaginous tissue growth in vitro. Isolated bovine articular chondrocytes were seeded in high density, 3D culture on Millicell? filters. After two weeks of preculture, the constructs were cultivated with or without continuous media flow (5–10 μL/min) for a period of one week. Tissue engineered cartilage constructs grown under continuous media flow significantly accumulated more collagen and proteoglycans (increased by 50–70%). These changes were similar in magnitude to the reported effect of through‐thickness perfusion without the need for large volumetric flow rates (5–10μL/min as opposed to 240–800 μL/min). Additionally, tissues grown in the reactor displayed some evidence of the stratified morphology of native cartilage as well as containing stores of intracellular glycogen. Future studies will investigate the effect of long‐term continuous culture in terms of extracellular matrix accumulation and subsequent changes in mechanical function. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Feline herpesvirus‐1 down‐regulates MHC class I expression in an homologous cell system

Cytotoxic T lymphocytes (CTLs) are an essential component of the immune defense against many virus infections. CTLs recognize viral peptides in the context of the major histocompatibility complex (MHC) class I molecules on the surface of infected cells. Many viruses have evolved mechanisms to interfere with MHC class I expression as a means of evading the host immune response. In the present research we have studied the effect of in vitro Feline Herpesvirus 1 (FeHV‐1) infection on MHC class I expression. The results of this study demonstrate that FeHV‐1 down regulates surface expression of MHC class I molecules on infected cells, presumably to evade cytotoxic T‐cell recognition and, perhaps, attenuate induction of immunity. Sensitivity to UV irradiation and insensitivity to a viral DNA synthesis inhibitor, like phosphonacetic acid, revealed that immediate early or early viral gene(s) are responsible. Use of the protein translation inhibitor cycloheximide confirmed that an early gene is primarily responsible. J. Cell. Biochem. 106: 179–185, 2009. © 2008 Wiley‐Liss, Inc.     

解离的小鼠牙胚上皮细胞在重聚发育过程仍维持牙齿发育基因的表达

为了解牙胚细胞解离重聚过程的细胞形态和分子机制,将小鼠帽状期牙胚解离细胞重聚,移植到小鼠肾囊膜下培养,组织切片,HE染色,观察再生牙齿的形态发生过程,并用原位杂交的方法进一步检测了与牙上皮发育密切相关的基因在再生牙上皮中的表达情况。结果发现,解离重聚的牙胚细胞在牙齿器官的再生过程重现了正常牙齿的形态发生过程;解离的牙上皮细胞在重聚和再生过程中保持Fgf8、Noggin和Shh等牙上皮发育基因表达。以上结果表明,即便是被解离形成分散状态的牙上皮细胞,在与牙胚间充质细胞重新聚合后,仍保持牙向分化的潜能。该结果为理解牙齿再生的机理提供新的实验数据,对利用干细胞进行牙齿再生的研究有重要的提示意义。     

Mechanistic study of saikosaponin‐d (Ssd) on suppression of murine T lymphocyte activation

Saikosaponin‐d (Ssd) is a triterpene saponin derived from the medicinal plant, Bupleurum falcatum L. (Umbelliferae). Previous findings showed that Ssd exhibits a variety of pharmacological and immunomodulatory activities including anti‐inflammatory, anti‐bacterial, anti‐viral and anti‐cancer effects. In the current study we have investigated the effects of Ssd on activated mouse T lymphocytes through the NF‐κB, NF‐AT and AP‐1 signaling pathways, cytokine secretion, and IL‐2 receptor expression. The results demonstrated that Ssd not only suppressed OKT3/CD28‐costimulated human T cell proliferation, it also inhibited PMA, PMA/Ionomycin and Con A‐induced mouse T cell activation in vitro. The inhibitory effect of Ssd on PMA‐induced T cell activation was associated with down‐regulation of NF‐κB signaling through suppression of IKK and Akt activities. In addition, Ssd suppressed both DNA binding activity and the nuclear translocation of NF‐AT and activator protein 1 (AP‐1) of the PMA/Ionomycin‐stimulated T cells. The cell surface markers like IL‐2 receptor (CD25) were also down‐regulated together with decreased production of pro‐inflammatory cytokines of IL‐6, TNF‐α and IFN‐γ. These results indicate that the NF‐κB, NF‐AT and AP‐1 (c‐Fos) signaling pathways are involved in the T cell inhibition evoked by Ssd, so it can be a potential candidate for further study in treating T cell‐mediated autoimmune conditions. J. Cell. Biochem. 107: 303–315, 2009. © 2009 Wiley‐Liss, Inc.     

Verification of a new biocompatible single‐use film formulation with optimized additive content for multiple bioprocess applications

Single‐use bioprocessing bags and bioreactors gained significant importance in the industry as they offer a number of advantages over traditional stainless steel solutions. However, there is continued concern that the plastic materials might release potentially toxic substances negatively impacting cell growth and product titers, or even compromise drug safety when using single‐use bags for intermediate or drug substance storage. In this study, we have focused on the in vitro detection of potentially cytotoxic leachables originating from the recently developed new polyethylene (PE) multilayer film called S80. This new film was developed to guarantee biocompatibility for multiple bioprocess applications, for example, storage of process fluids, mixing, and cell culture bioreactors. For this purpose, we examined a protein‐free cell culture medium that had been used to extract leachables from freshly gamma‐irradiated sample bags in a standardized cell culture assay. We investigated sample bags from films generated to establish the operating ranges of the film extrusion process. Further, we studied sample bags of different age after gamma‐irradiation and finally, we performed extended media extraction trials at cold room conditions using sample bags. In contrast to a nonoptimized film formulation, our data demonstrate no cytotoxic effect of the S80 polymer film formulation under any of the investigated conditions. The S80 film formulation is based on an optimized PE polymer composition and additive package. Full traceability alongside specifications and controls of all critical raw materials, and process controls of the manufacturing process, that is, film extrusion and gamma‐irradiation, have been established to ensure lot‐to‐lot consistency. © 2014 The Authors. Published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 30:1171–1176, 2014     

Targeted gene delivery to CD117‐expressing cells in vivo with lentiviral vectors co‐displaying stem cell factor and a fusogenic molecule

The development of a lentiviral system to deliver genes to specific cell types could improve the safety and the efficacy of gene delivery. Previously, we have developed an efficient method to target lentivectors to specific cells via an antibody–antigen interaction in vitro and in vivo. We report herein a targeted lentivector that harnesses the natural ligand–receptor recognition mechanism for targeted modification of c‐KIT receptor‐expressing cells. For targeting, we incorporate membrane‐bound human stem cell factor (hSCF), and for fusion, a Sindbis virus‐derived fusogenic molecule (FM) onto the lentiviral surface. These engineered vectors can recognize cells expressing surface CD117, resulting in efficient targeted transduction of cells in an SCF‐receptor dependent manner in vitro, and in vivo in xenografted mouse models. This study expands the ability of targeting lentivectors beyond antibody targets to include cell‐specific surface receptors. Development of a high titer lentivector to receptor‐specific cells is an attractive approach to restrict gene expression and could potentially ensure therapeutic effects in the desired cells while limiting side effects caused by gene expression in non‐target cells. Biotechnol. Bioeng. 2009; 104: 206–215 © 2009 Wiley Periodicals, Inc.     

Aggregated P19 mouse embryonal carcinoma cells as a simple in vitro model to study the molecular regulations of mesoderm formation and axial elongation morphogenesis

Because of their capacity to give rise to various types of cells in vitro, embryonic stem and embryonal carcinoma (EC) cells have been used as convenient models to study the mechanisms of cell differentiation in mammalian embryos. In this study, we explored the mouse P19 EC cell line as an effective tool to investigate the factors that may play essential roles in mesoderm formation and axial elongation morphogenesis. We first demonstrated that aggregated P19 cells not only exhibited gene expression patterns characteristic of mesoderm formation but also displayed elongation morphogenesis with a distinct anterior–posterior body axis as in the embryo. We then showed by RNA interference that these processes were controlled by various regulators of Wnt signaling pathways, namely β‐catenin, Wnt3, Wnt3a, and Wnt5a, in a manner similar to normal embryo development. We further showed by inhibitor treatments that the axial elongation morphogenesis was dependent on the activity of Rho‐associated kinase. Because of the convenience of these experimental manipulations, we propose that P19 cells can be used as a simple and efficient screening tool to assess the potential functions of specific molecules in mesoderm formation and axial elongation morphogenesis. genesis 47:93–106, 2009. © 2008 Wiley‐Liss, Inc.