Immobilization with a single dose of ketamine hydrochloride and a combination of xylazine hydrochloride-ketamine hydrochloride and antagonism by yohimbine hydrochloride in the Japanese monkey (Macaca fuscata)

Forty-nine free-ranging Japanese monkeys (Macaca fuscata) were immobilized with 4.3–15.6 mg/kg (mean±S.D.=10.0±2.5 mg/kg) of ketamine hydrochloride (HCl), and 27 Japanese monkeys kept in enclosures were immobilized with a combination of 0.8–1.4 mg/kg (1.0±0.2 mg/kg) of xylazine HCl and 4.0–7.1 mg/kg (5.0±0.6 mg/kg) of ketamine HCl. In the xylazine HCl-ketamine HCl combination, good myorelaxation was induced. The mean induction times for the single dosage of ketamine HCl and the xylazine HCl-ketamine HCl combination were 2.8±1.5 min and 6.9±4.4 min, respectively. The mean immobilization times with the single dosage of ketamine HCl and the xylazine HCl-ketamine HCl combination were 39.3±16.5 min and 58.8±34.2 min, respectively. A half dose of ketamine HCl in combination with xylazine HCl could also immobilize Japanese monkeys successfully. Administrations of 0.5 mg/kg i.v. and 1.0 mg/kg i.m. of yohimbine HCl as an antagonist to xylazine HCl at 30 min after the induction reduced the immobilization time to 31.4±0.5 min and 49.0±22.1 min, respectively. Yohimbine HCl appears to be an effective antagonist to combination anesthesia by xylazine HCl-ketamine HCl in the Japanese monkey.     

Cyclodextrin glycosyltransferase production by free cells of <Emphasis Type="Italic">Bacillus circulans</Emphasis> DF 9R in batch fermentation and by immobilized cells in a semi-continuous process

Cyclodextrin glycosyltransferase (CGTase) catalyzes starch conversion into cyclic or linear oligosaccharides, important industrial products for the complexation of non-polar substances. In this work, conditions to increase CGTase production from Bacillus circulans strain DF 9R were optimized by two systems. On one hand, free cells were grown in batch fermentation experiments to optimize aeration and pH. The highest activity (1.47 ± 0.21 U ml^?1) was achieved after 48 h of growth, aeration of 1.5 vvm and pH regulated to 7.6. On the other hand, bacterial cells were immobilized on loofa and synthetic sponge, and used for CGTase production in a semi-continuous process. An initial biomass of 30 mg of lyophilized cells and an immobilization time of 24 h with loofa or synthetic sponge were enough to achieve increased production of CGTase: 0.91 ± 0.10 and 0.95 ± 0.11 U ml^?1, respectively. Sponges with immobilized bacteria were reused in 12 successive cycles. Besides, in our conditions, CGTase was not adsorbed onto the supports used for immobilization, which ensured the total recovery of the enzyme from the culture medium. The two CGTase production processes studied showed similar productivity and could be potentially scaled up.     

Comparison of xylazine–ketamine and medetomidine–ketamine anaesthesia in the Iberian ibex (<Emphasis Type="Italic">Capra pyrenaica</Emphasis>)

A comparison was made between two anaesthetic combinations in 35 free-ranging adult Iberian ibexes (Capra pyrenaica), from May to December 2005. Sixteen ibexes (10 males, 6 females) were captured using xylazine–ketamine (3.0 ± 0.4 + 3.0 ± 0.4 mg/kg) and 19 ibexes (12 males, 7 females) with medetomidine–ketamine (0.10 ± 0.02 + 2.1 ± 0.3 mg/kg). Anaesthetic times were evaluated, as well as clinical variables (respiratory and heart rates, rectal temperature, haemoglobin oxygen saturation), haematological and biochemical variables, at the time of induction and after 1 h. The heart rate of ibex immobilized with medetomidine–ketamine was higher than those immobilized with xylazine–ketamine. Stabilization of the heart rate of ibex immobilized with medetomidine–ketamine came earlier than those immobilized with xylazine–ketamine. Rectal temperature decreased and stabilized in both groups, but earlier in the xylazine–ketamine group, and hypoxemia was observed in both groups. The white blood cell count of ibex immobilized with medetomidine–ketamine was lower than those immobilized with xylazine–ketamine throughout anaesthesia, while sodium concentration was higher only after 1 h of anaesthesia. In ibex immobilized with xylazine–ketamine, the neutrophil count, serum creatinine kinase activity and aspartate aminotransferase activity increased after 1 h of immobilization, while triglycerides decreased. Changes found in haematological and biochemical variables suggest no major differences in the different drug combinations used, but clinical findings of this study, as well as hypoxemia, hypothermia and bradycardia, were important records that should be taken into account when performing a safe operation.     

Immobilization of horseradish peroxidase onto Purolite® A109 and its anthraquinone dye biodegradation and detoxification potential

Horseradish peroxidase (HRP) is a highly specific enzyme with great potential for use in the decolorization of synthetic dyes. A comprehensive study of HRP immobilization using various techniques such as adsorption and covalent immobilization on the novel carrier Purolite® A109 with a special focus on enzymatic decolorization and toxicity of artificially colored wastewater. The immobilized preparations with an activity of 156.21 ± 1.41 U g⁻¹ and 85.71 ± 1.62 U g⁻¹ after the HRP adsorption and covalent immobilization, respectively, were obtained. Stability and reusability of the immobilized preparations were also evaluated. A noteworthy decolorization level (~90%) with immobilized HRP was achieved. Phytotoxicity testing using Mung bean seeds and acute toxicity assay with Artemia salina has confirmed the applicability of the obtained immobilized preparation in industrial wastewater plants for the treatment of colored wastewater.     

RESPONSE OF ANTARCTIC FUR SEALS TO IMMOBILIZATION WITH KETAMINE, A KETAMINE-DIAZEPAM OR KETAMINE-XYLAZINE MIXTURE, AND ZOLETIL®

Adult Antarctic fur seals (Arctocephalus gazella) were immobilized with Zoletil^® ( n = 172), ketamine ( n = 30), ketamine mixed with diazepam ( n = 23) and with ketamine mixed with xylazine ( n = 45). Response to all drugs was highly variable. There was a relationship between dose rate and level of immobilization in females given Zoletil^®. Males were slightly more sensitive to Zoletil^® than females but this could have been due to the greater body mass and lower mass-specific metabolic rate of males. The dose required to achieve a level of immobilization declined with greater body mass for Zoletil^® and ketamine but not for ketamine-diatepam. Ketamine and ketamine-sedative mixtures commonly caused mild tremoring and occasionally caused convulsions. Neither reaction was seen with Zoletil^®. Mean doses were, Zoletil^® 1.5 mg/ kg, ketamine 6.9 mg/kg, ketamine-diazepam 6.3 mg/kg ketamine and 6.3 μg/kg diazepam, and ketamine-xylazine 7.3 mg/kg ketamine and 0.62 mg/ kg xylazine. Zoletil^® performs at least as well on Antarctic fur seals as ketamine but it may cause respiratory depression. The dose of ketamine required for Antarctic fur seals was greater than for most other species of seals.     

Growth and phosphorus removal by <Emphasis Type="Italic">Synechococcus elongatus</Emphasis> co-immobilized in alginate beads with <Emphasis Type="Italic">Azospirillum brasilense</Emphasis>

This study examined the co-immobilization of the cyanobacterium Synechococcus elongatus with the plant growth-promoting bacterium Azospirillum brasilense in alginate beads and its potential application for the removal of phosphorus from aquaculture wastewater. Co-immobilization of both microorganisms significantly increased the cell density of S. elongatus (2852.5?×?10⁴ cells mL^?1) compared with that of immobilization of cyanobacteria alone (1325.2?×?10⁴ cells mL^?1). Chlorophyll a content was similar in co-immobilized (11.1?±?3.5 pg cell^?1) and immobilized S. elongatus (14.5?±?4.9 pg cell^?1). Azospirillum brasilense showed continuous growth until day 2, after which its cell concentration declined until the end of the assay. Co-immobilized S. elongatus removed more phosphorus (44.8 %) than immobilized cyanobacteria cells alone (32.0 %). In conclusion, phosphate removal was greater with free cells of S. elongatus but overlapped with the values that were obtained with the treatment of co-immobilization of cells. Our results demonstrate that A. brasilense enhances the growth of S. elongatus and improves its removal of phosphorus when they are co-immobilized in alginate beads compared with only immobilization of cyanobacteria cells alone.     

Effects of adjuvant and conidial concentration on the efficacy of <Emphasis Type="Italic">Beauveria bassiana</Emphasis> for the control of the two spotted spider mite, <Emphasis Type="Italic">Tetranychus urticae</Emphasis>

Greenhouse experiments were conducted on various crops (cucumber, tomato, eggplant, green bean) to ascertain the effects of Break-thru^® (polyether-polymethylsiloxane-copolymer, a silicone surfactant) and an oil emulsion, on Beauveria bassiana (Balsamo) Vuillemin (Bb) applications for the control of the two spotted spider mite, Tetranychus urticae Koch. The objectives were to compare a) the efficacy of Bb control when applied in aqueous Break-thru^® or an oil emulsion; b) the effects of various concentrations of Bb conidia, as affected by each surfactant; and c) the effects of Break-thru^® on the activity of the fungus. Conidia were suspended either in an aqueous Break-thru^® or an emulsifiable formulation at different conidial concentrations (1.05 × 10⁶, 2.1 × 10⁶ and 4.2 × 10⁶ conidia ml^?1) and sprayed onto leaves 2 weeks after artificial pest inoculation. Two sprays were performed, with an interval of one week from one spray to another, and T. urticae population counts (both motile and egg stages) were made on plant leaves 7 days after each spray. Bb conidia in Break-thru^® were more efficacious than conidia in emulsifiable formulation. With the highest rate of conidia (4.2 × 10⁶ conidia ml^?1), mortality of adult mites ranged from 60 ± 4.2 (mean ± SE) to 85.7 ± 4.3% in the Break-thru^® suspension and 39.4 ± 7 to 61.3 ± 6% in the oil emulsion. Leaf damage index was also substantially reduced from 70% in the unsprayed control to 40% by the application of Bb conidia at the highest rate with Break-thru^®. Break-thru^® can be combined with Bb in the integrated management of T. urticae and Isolate R444 is a promising candidate for the control of the pest.     

Immobilization/stabilization of acid urease on Eupergit® supports

The adsorption capacity and immobilization rate of two Eupergit® supports for acid urease was studied by varying the ionic strength and enzyme preparation concentration in the immobilizing solution at pH 7. Eupergit® C250 L yielded a series of derivatives with enzyme loadings (Y_P/B) ranging from 48 to 171 mg of bovine serum albumin equivalent (BSAE) per gram of dry support (ds). Use of drastic postimmobilization conditions at pH 9 for 3–9 days yielded a slight decrease (8–14%) in the initial activity of immobilized enzymes and a limited increase in the stabilization factor (1.1–1.5), as assessed by accelerated aging tests at 65°C. Further storage tests at 4°C in the wet state showed that the activity of several derivatives either stabilized or not was practically constant for as long as 547 days. Both free enzyme and immobilized acid urease derivatives exhibited a kinetic pattern of the Michaelis–Menten type. Using the Eadie–Hofstee diagram, the specific ammonia formation rate constant for free (k_cat) or immobilized (k′_cat) enzyme resulted to be little affected by immobilization (k_cat ≈ k′_cat ≈ 18.86 ± 0.34 IU/mg BSAE), whereas the apparent Michaelis constant for immobilized enzymes exhibited a statistically significant increase at P < 0.05 from the intrinsic value (2.55 ± 0.14 mM) for free enzyme to 5.38 ± 0.87 mM as Y_P/B increased to 171 mg BSAE/g ds. By estimating the observable Thiele modulus (?_obs), the activity of the biocatalyst with the greatest enzyme loading at the lowest urea concentrations tested (0.833 mM) was reduced by a factor of about 2 due to internal diffusional limitations. By operating in the pseudofirst‐order regime with immobilized derivatives at Y_P/B about 126 mg BSAE/g ds, their activity after grinding was no more limited by intraparticle diffusion and approached the value for free enzyme. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Production of cyclodextrin glycosyltransferase by immobilized <Emphasis Type="Italic">Bacillus</Emphasis> sp. on chitosan matrix

The whole-cell immobilization on chitosan matrix was evaluated. Bacillus sp., as producer of CGTase, was grown in solid-state and batch cultivation using three types of starches (cassava, potato and cornstarch). Biomass growth and substrate consumption were assessed by flow cytometry and modified phenol–sulfuric acid assays, respectively. Qualitative analysis of CGTase production was determined by colorless area formation on solid culture containing phenolphthalein. Scanning electron microscopy (SEM) analysis demonstrated that bacterial cells were immobilized on chitosan matrix efficiently. Free cells reached very high numbers during batch culture while immobilized cells maintained initial inoculum concentration. The maximum enzyme activity achieved by free cells was 58.15 U ml^?1 (36 h), 47.50 U ml^?1 (36 h) and 68.36 U ml^?1 (36 h) on cassava, potato and cornstarch, respectively. CGTase activities for immobilized cells were 82.15 U ml^?1 (18 h) on cassava, 79.17 U ml^?1 (12 h) on potato and 55.37 U ml^?1 (in 6 h and max 77.75 U ml^?1 in 36 h) on cornstarch. Application of immobilization technique increased CGTase activity significantly. The immobilized cells produced CGTase with higher activity in a shorter fermentation time comparing to free cells.     

Fibrous polymer-grafted chitosan/clay composite beads as a carrier for immobilization of papain and its usability for mercury elimination

Papain, which is an industrially important enzyme, has been immobilized on fibrous polymer-modified composite beads, namely poly(methacrylic acid)-grafted chitosan/clay. Characterization studies have been done using FTIR and SEM analysis. Operating parameters such as pH and initial concentration of papain have been varied to obtain the finest papain immobilized polymer-modified composite beads. The immobilization capacity of composite beads has been determined as 34.47 ± 1.18 (n = 3) mg/g. The proteolytic activity of immobilized papain was operated using bovine serum albumin (BSA) and maximum velocity (V _max) and Michaelis–Menten constant (K_m) values of the free and immobilized enzymes were determined using Lineweaver–Burk and Eadie–Hofstee equations. Usability of papain immobilized polymer-modified composite beads as adsorbents for the elimination of mercury was investigated. The maximum removal capacity of PIPMC beads has been found to be 4.88 ± 0.21 mg Hg/g when the initial metal concentration and weight of polymer-modified composite beads were 50 mg/L and 0.04 g at pH 7, respectively. Mercury removal performance of the papain immobilized polymer-modified composite beads was investigated in conjunction with Cu (II), Zn (II) and Cd (II) ions. The mercury adsorption capacity of papain immobilized polymer-modified composite beads was a slight reduction from 1.15 to 0.89 mg/g in presence of multiple metal salts.     

Immobilization of <Emphasis Type="BoldItalic">Irpex lacteus</Emphasis> to liquid-core alginate beads and their application to degradation of pollutants

White rot fungi (WRF) are applicable to biodegradation of recalcitrant pollutants. However, excessive biomass growth typical for WRF cultivation can hinder their large scale applications. Therefore, immobilization of Irpex lacteus to liquid-core alginate beads restricting excessive mycelium growth and simultaneously keeping high degradation rate of pollutants was tested. Effective diffusivities of dyes to the beads varied from (2.98 ± 0.69) × 10^?10 to (10.27 ± 2.60) × 10^?10 m²/s. Remazol Brilliant Blue R (RBBR), Reactive Orange 16 (RO16), and Naphthol Blue Black (NBB) were used as model dyes. The immobilized fungus decolorized model dyes when applied both in microwell plates and in fluidized bed reactors. Using the microwell plates, the apparent reaction rate constants ranged from (2.06 ± 0.11) × 10^?2 to (11.06 ± 0.27) × 10^?2 1/h, depending on the dye used and its initial concentration. High initial concentrations negatively affected the dye decolorization rate. No fungal growth outside the beads was observed in fluidized bed reactors and thus no operational problems linked to an excessive biomass growth occurred. When RBBR was decolorized in subsequent batches in the fluidized bed reactor, the apparent reaction rate constant increased from (11.63 ± 0.35) × 10^?2 to (29.26 ± 7.19) × 10^?2 1/h.     

Enhancing isomaltulose production by recombinant Escherichia coli producing sucrose isomerase: culture medium optimization containing agricultural wastes and cell immobilization

Isomaltulose is a structural isomer of sucrose commercially used in food industries. In this work, recombinant Escherichia coli producing sucrose isomerase (SIase) was used to convert sucrose into isomaltulose. To develop an economical industrial medium, untreated cane molasses (10.63 g l^?1), yeast extract (25.93 g l^?1), and corn steep liquor (10.45 g l^?1) were used as main culture compositions for SIase production. The relatively high SIase activity (14.50 ± 0.11 U mg DCW^?1) was obtained by the recombinant cells. To the best of our knowledge, this is the first investigation on SIase production by engineered E. coli using untreated cane molasses. The recombinant E. coli cells expressing the SIase gene were immobilized in calcium alginate gel in order to improve the efficiency of recycling. The immobilization was most effective with 2 % (w/v) sodium alginate and 3 % (w/v) calcium chloride. The optimal initial biomass for immobilization was 20 % (w/v, wet wt.), with a hardening time of 8 h for cell immobilization. The immobilized E. coli cells exhibited good stability for 30 batches with the productivity of 0.45 g isomaltulose g pellet^?1 h^?1. A continuous isomaltulose formation process using a column reactor remained stable for 40 days with 83 ± 2 % isomaltulose yield, which would be beneficial for economical production of isomaltulose.     

Desulfurization with <Emphasis Type="Italic">Thialkalivibrio versutus</Emphasis> immobilized on magnetic nanoparticles modified with 3-aminopropyltriethoxysilane

Objective

Thialkalivibrio versutus D301 cells were immobilized on Fe₃O₄ nanoparticles (NPs) synthesized by an improved chemical coprecipitation method and modified with 3-aminopropyltriethoxysilane (APTES), then the immobilized cells were used in sulfur oxidation.

Results

The prepared Fe₃O₄–APTES NPs had a narrow size distribution (10 ± 2 nm) and were superparamagnetic, with a saturation magnetization of 60.69 emu/g. Immobilized cells had a saturation magnetization of 34.95 emu/g and retained superparamagnetism. The optimum conditions for cell immobilization were obtained at pH 9.5 and 1 M Na⁺. The immobilization capacity of Fe₃O₄–APTES NPs was 7.15 g DCW/g-NPs that was 2.3-fold higher than that of Fe₃O₄ NPs. The desulfurization efficiency of the immobilized cells was close to 100%, having the same sulfur oxidation capacity as free cells. Further, the immobilized cells could be reused at least eight times, retaining more than 85% of their desulfurization efficiency.

Conclusion

Immobilization of cells with the modified magnetic NPs efficiently increased cell controllability, have no effect on their desulfurization activity and could be effectively used in large-scale industrial applications.

     

Chemical immobilization of free-ranging dhole (Cuon alpinus), binturong (Arctictis binturong), and yellow-throated marten (Martes flavigula) in Thailand

No published information exists on the chemical immobilization of free-ranging dholes (Cuon alpinus), binturongs (Arctictis binturong), or yellow-throated martens (Martes flavigula). We chemically immobilized these species in Thailand using a mixture of ketamine hydrochloride with xylazine hydrochloride (KH–XH) and tiletamine hydrochloride with zolazepam hydrochloride (TH–ZH). Mean (±SD) dose of KH–XH was 18.1±5.3 and 0.9±0.1 mg/kg for dholes (n=2), 19.7±4.1 and 1.3±0.4 mg/kg for binturongs (n=8), and 28.7±3.3 and 1.1±0.1 mg/kg for yellow-throated martens (n=5), respectively. Mean dose of TH–ZH was 4.1±0.1 mg/kg for dhole (n=2). Induction time, duration of anesthesia, and recovery time were satisfactory for standard field research procedures including radio-collaring, although the effects on yellow-throated martens and binturongs were more variable. Respiration and muscle rigidity were monitored during sedation with no observed adverse physiological effects. Individuals were released after full recovery and monitored via radio telemetry for 4–23 months with no observed detrimental effects due to chemical immobilization. We conclude that KH–XH and TH–ZH are safe and effective immobilization agents for these carnivores; however, we suggest testing different KH–XH ratios and dosages, and other immobilizing agents for these species.     

Mucor circinelloides whole-cells as a biocatalyst for the production of ethyl esters based on babassu oil

The intracellular lipase production by Mucor circinelloides URM 4182 was investigated through a step-by-step strategy to attain immobilized whole-cells with high lipase activity. Physicochemical parameters, such as carbon and nitrogen sources, inoculum size and aeration, were studied to determine the optimum conditions for both lipase production and immobilization in polyurethane support. Olive oil and soybean peptone were found to be the best carbon and nitrogen sources, respectively, to enhance the intracellular lipase activity. Low inoculum level and poor aeration rate also provided suitable conditions to attain high lipase activity (64.8 ± 0.8 U g^?1). The transesterification activity of the immobilized whole- cells was assayed and optimal reaction conditions for the ethanolysis of babassu oil were determined by experimental design. Statistical analysis showed that M. circinelloides whole-cells were able to produce ethyl esters at all tested conditions, with the highest yield attained (98.1 %) at 35 °C using an 1:6 oil-to-ethanol molar ratio. The biocatalyst operational stability was also assayed in a continuous packed bed reactor (PBR) charged with glutaraldehyde (GA) and Aliquat-treated cells revealing half-life of 43.0 ± 0.5 and 20.0 ± 0.8 days, respectively. These results indicate the potential of immobilized M. circinelloides URM 4182 whole-cells as a low-cost alternative to conventional biocatalysts in the production of ethyl esters from babassu oil.     

Optimization of <Emphasis Type="Italic">Curcuma</Emphasis> Oil/Quinine-Loaded Nanocapsules for Malaria Treatment

Quinine, a treatment used in chloroquine-resistant falciparum malaria, was loaded into poly(?-caprolactone) or Eudragit^® RS100 nanocapsules using Curcuma oil as the oil-based core. Until now, the effect of cationic nanocapsules on malaria has not been reported. A 2⁴ factorial design was adopted using, as independent variables, the concentration of Curcuma oil, presence of quinine, type of polymer, and aqueous surfactant. Diameter, zeta potential, and pH were the responses studied. The formulations were also evaluated for drug content, encapsulation efficiency, photostability, and antimalarial activity against Plasmodium berghei-infected mice. The type of polymer influenced all of the responses studied. Quinine-loaded Eudragit^® RS100 (F13) and PCL nanocapsules (F9), both with polysorbate 80 coating, showed nanometric particle size, positive zeta potential, neutral pH, high drug content, and quinine photoprotection ability; thus, these nanocapsules were selected for in vivo tests. Both formulations showed lower levels of parasitemia from the beginning of the experiment (5.78 ± 3.60 and 4.76 ± 3.46% for F9 and F13, respectively) and highest survival mean time (15.3 ± 2.0 and 14.9 ± 5.6 days for F9 and F13, respectively). F9 and F13 showed significant survival curve compared to saline, thus demonstrating that nanoencapsulation improved bioefficacy of QN and co-encapsulated curcuminoids, regardless of the surface charge.     

Immobilization of <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase B onto Purolite<Superscript>®</Superscript> MN102 and its application in solvent-free and organic media esterification

The aim of this study was to develop simple and efficient method for immobilization of Candida antarctica lipase B onto hydrophobic anion exchange resin Purolite^® MN102 and to apply immobilized catalyst for the enzymatic synthesis of two valuable esters—isoamyl acetate and l-ascorbyl oleate. At optimized conditions (1 M phosphate buffer pH = 7, 7 h at 25 °C, and 18.75 mg of offered proteins g^?1 of support), immobilized lipase with hydrolytic activity of 888.4 p-nitrophenyl butyrate units g^?1 was obtained. Afterwards, preparation was applied for the solvent-free synthesis of isoamyl acetate from triacetin and isoamyl alcohol. At 75 °C, 1 M of isoamyl alcohol, and 6 mg ml^?1 of enzyme 100 % yield was achieved in 6 h, while at prolonged reaction times, complete conversion was enabled even at lower temperatures, lower lipase loadings, and higher substrate concentrations. After 15 consecutive reuses (60 h), activity of catalyst dropped to 50 % of its initial value and total amount of 1.31 mol (170.55 g) of ester with 1 g of biocatalyst was produced. Even higher operational stability of lipase (25 % loss of activity in 200 h) was observed in the synthesis of l-ascorbyl oleate performed in organic solvent (t-butanol). Multiple use of one batch of immobilized biocatalyst in both cases led to a significant process cost reduction and substantial increment of corresponding productivities.     

Tiletamine/zolazepam immobilization of adult post-moult southern elephant seal males

Immobilization and anaesthesia of adult male southern elephant seals (Mirounga leonina) is potentially risky for animals and scientists. A tiletamine/zolazepam injection is considered the most appropriate drug combination for field application in this species. Since appropriate dosages are difficult to assess due to uncertainties in weight estimation, we used photogrammetry-derived weight estimates to ensure precise post hoc calculations of dosages. We report on 15 intramuscular tiletamine/zolazepam immobilizations of post-moult males of the upper weight class at King George Island/Isla 25 de Mayo, in April 2010. Initial injections were made using blowpipe syringes. Mean tiletamine/zolazepam combined dosages of 0.71 mg kg^?1 (SD ± 0.16) ranged between 0.46 and 1.01 mg kg^?1. In four cases, ketamine was added in dosages between 0.96 and 2.61 mg kg^?1. Mean induction period was 23 min (± 15), and the mean duration of the procedures from first injection to release of the animals required 96 min (± 51). Four seals exhibited periods of apnoea, and one case of an extended, repetitive, and potentially critical apnoea (> 25 and 8 min) required intervention in order to successfully re-initiate spontaneous respiration. All procedures resulted in proper immobilizations allowing for the deployment of the satellite tags on the seals’ heads. The fact that even substantial deviations between the initial weight estimates and the photogrammetry-derived weight estimates had no apparent effect on the course of the immobilization underlines the drugs’ wide safety margin in this species.     

Activity of myrosinase from Sinapis alba seeds immobilized into Ca-polygalacturonate as a simplified model of soil-root interface mucigel

Ca-polygalacturonate is a demethoxylated component of pectins which are constitutive of plant root mucigel. In order to define the role of root mucigel in myrosinase immobilization and activity at root level, a myrosinase enzyme which had been isolated from Sinapis alba seeds was immobilized into Ca-polygalacturonate. The activity profile for the immobilized and free enzyme was evaluated using the pH-Stat method as a function of time, temperature, and pH. The Michaelis-Menten kinetic parameters change between the immobilized (V _max ?=?127?±?13 U mg^?1 protein; K _M ?=?6.28?±?0.09?mM) and free (V _max ?=?17?±?1 U mg^?1 protein; K _M ?=?0.96?±?0.01?mM) forms of myrosinase, probably due to conformational changes involving the active site as a consequence of enzyme immobilization. Immobilized enzyme activity evaluated as a function of different substrates gave the highest value with nasturtin, the glucosinolate that is typical of several brassicaceae plant roots containing the glucosinolate-myrosinase defensive system. No feedback regulation mechanism was found in the presence of an excess of enzymatic reaction products (i.e. allyl isothiocyanate or sulphate). The high enzyme immobilization yield into Ca-polygalacturonate and its activity preservation under different conditions suggest that the enzyme released by plants at root level could be entrapped in root mucigel in order to preserve its activity.     

Bioconversion of farnesol and 1,4-dihydroxy-2-naphthoate to menaquinone by an immobilized whole-cell biocatalyst using engineered <Emphasis Type="Italic">Elizabethkingia meningoseptica</Emphasis>

Menaquinone (MK) has important applications in the pharmaceutical and food industries. To increase the production rate (Q_P) of MK-4, we developed a straightforward biotransformation method for MK-4 synthesis directly from its precursors 1,4-dihydroxy-2-naphthoate (DHNA) and farnesol using whole cells of genetically engineered Elizabethkingia meningoseptica. Results showed that MK-4 can be produced directly from farnesol and DHNA using both free and immobilized FM-D198 cells. MK-4 yield peaked at 29.85?±?0.36 mg/L in the organic phase and 24.08?±?0.33 mg/g DCW after 12 h of bioconversion using free cells in a two-phase conversion system. MK-4 yield reached 26.34?±?1.35 mg/L and 17.44?±?1.05 mg/g DCW after 8 h using immobilized cells. Although this yield was lower than that using free cells, immobilized cells can be re-used for MK-4 production via repeated-batch culture. After ten batch cultures, efficient MK-4 production was maintained at a yield of more than 20 mg/L. After optimizing the catalysis system, the MK-4 yield reached 26.91?±?1.27 mg/L using the immobilized cells and had molar conversion rates of 58.56 and 76.90% for DHNA and farnesol, respectively.