Factor XI homodimer structure is essential for normal proteolytic activation by factor XIIa, thrombin, and factor XIa

Coagulation factor XI (FXI) is a covalent homodimer consisting of two identical subunits of 80 kDa linked by a disulfide bond formed by Cys-321 within the Apple 4 domain of each subunit. Because FXI(C321S) is a noncovalent dimer, residues within the interface between the two subunits must mediate its homodimeric structure. The crystal structure of FXI demonstrates formation of salt bridges between Lys-331 of one subunit and Glu-287 of the other subunit and hydrophobic interactions at the interface of the Apple 4 domains involving Ile-290, Leu-284, and Tyr-329. FXI(C321S), FXI(C321S,K331A), FXI(C321S,E287A), FXI(C321S,I290A), FXI(C321S,Y329A), FXI(C321S,L284A), FXI(C321S,K331R), and FXI(C321S,H343A) were expressed in HEK293 cells and characterized using size exclusion chromatography, analytical ultracentrifugation, electron microscopy, and functional assays. Whereas FXI(C321S) and FXI(C321S,H343A) existed in monomer/dimer equilibrium (K(d) approximately 40 nm), all other mutants were predominantly monomers with impaired dimer formation by analytical ultracentrifugation (K(d)=3-38 microm). When converted to the active enzyme, FXIa, all the monomeric mutants activated FIX similarly to wild-type dimeric FXIa. In contrast, these monomeric mutants could not be activated efficiently by FXIIa, thrombin, or autoactivation in the presence of dextran sulfate. We conclude that salt bridges formed between Lys-331 of one subunit and Glu-287 of the other together with hydrophobic interactions at the interface, involving residues Ile-290, Leu-284, and Tyr-329, are essential for homodimer formation. The dimeric structure of FXI is essential for normal proteolytic activation of FXI by FXIIa, thrombin, or FXIa either in solution or on an anionic surface but not for FIX activation by FXIa in solution.     

Noncovalent interactions of the Apple 4 domain that mediate coagulation factor XI homodimerization

The Apple 4 (A4) domain of human plasma factor XI (FXI) was used to investigate the process of FXI noncovalent dimer formation. Recombinant 6-histidine-tagged A4 domain proteins were prepared utilizing a bacterial expression system. Purification was accomplished under denaturing conditions, followed by a refolding protocol to facilitate correct disulfide bond formation. Analysis of the A4 domain (C321S mutant) by size exclusion chromatography indicated the presence of a slowly equilibrating reversible monomer-dimer equilibrium. The elution profiles reveal highly symmetrical peaks for both dimeric and monomeric species with elution times that were highly reproducible for varying amounts of both the dimeric and monomeric species. The monomer-dimer equilibrium was found to be dependent upon changes in both pH and salt concentration. Under conditions approximating physiologic salt concentration and pH (20 mm HEPES, 100 mm NaCl, and 1 mm EDTA, pH 7.4), it was determined that the monomer-dimer equilibrium was characterized by a dissociation constant (K(D)) value of 229 +/- 26 nm with a calculated Delta G value of 9.1 kcal/mol. This report identifies electrostatic contributions and the presence of a hydrophobic component that mediate interactions at the A4 domain interface. The rate of dissociation for the recombinant A4 domain C321S mutant was examined by monitoring the increase in 4,4'-dianilino-1,1'-binaphthyl-5,5'-disulfonic acid dipotassium salt fluorescence under dissociating conditions, giving a value for a dissociation rate constant (k(off)) of 4.3 x 10(-3) s(-1).     

Tandem dimerization of the human p53 tetramerization domain stabilizes a primary dimer intermediate and dramatically enhances its oligomeric stability

Tetramerization of the human p53 tumor suppressor protein is required for its biological functions. However, cellular levels of p53 indicate that it exists predominantly in a monomeric state. Since the oligomerization of p53 involves the rate-limiting formation of a primary dimer intermediate, we engineered a covalently linked pair of human p53 tetramerization (p53tet) domains to generate a tandem dimer (p53tetTD) that minimizes the energetic requirements for forming the primary dimer. We demonstrate that p53tetTD self-assembles into an oligomeric structure equivalent to the wild-type p53tet tetramer and exhibits dramatically enhanced oligomeric stability. Specifically, the p53tetTD dimer exhibits an unfolding/dissociation equilibrium constant of 26 fM at 37 degrees C, or a million-fold increase in stability relative to the wild-type p53tet tetramer, and resists subunit exchange with monomeric p53tet. In addition, whereas the wild-type p53tet tetramer undergoes coupled (i.e. two-state) dissociation/unfolding to unfolded monomers, the p53tetTD dimer denatures via an intermediate that is detectable by differential scanning calorimetry but not CD spectroscopy, consistent with a folded p53tetTD monomer that is equivalent to the p53tet primary dimer. Given its oligomeric stability and resistance against hetero-oligomerization, dimerization of p53 constructs incorporating the tetramerization domain may yield functional constructs that may resist exchange with wild-type or mutant forms of p53.     

Mapping the folding free energy surface for metal-free human Cu,Zn superoxide dismutase

Mutations at many different sites in the gene encoding human Cu,Zn superoxide dismutase (SOD) are known to be causative agents in amyotrophic lateral sclerosis (ALS). One explanation for the molecular basis of this pathology is the aggregation of marginally soluble, partially structured states whose populations are enhanced in the protein variants. As a benchmark for testing this hypothesis, the equilibrium and kinetic properties of the reversible folding reaction of a metal-free variant of SOD were investigated. Reversibility was achieved by replacing the two non-essential cysteine residues with non-oxidizable analogs, C6A/C111S, to produce apo-AS-SOD. The metal-free pseudo-wild-type protein is folded and dimeric in the absence of chemical denaturants, and its equilibrium folding behavior is well described by an apparent two-state mechanism involving the unfolded monomer and the native dimer. The apparent free energy of folding in the absence of denaturant and at standard state is -20.37(+/- 1.04) kcal (mol dimer)(-1). A global analysis of circular dichroism kinetic traces for both unfolding and refolding reactions, combined with results from small angle X-ray scattering and time-resolved fluorescence anisotropy measurements, supports a sequential mechanism involving the unfolded monomer, a folded monomeric intermediate, and the native dimer. The rate-limiting monomer folding reaction is followed by a near diffusion-limited self-association reaction to form the native dimer. The relative population of the folded monomeric intermediate is predicted not to exceed 0.5% at micromolar concentrations of protein under equilibrium and both strongly unfolding and refolding conditions for metal-free pseudo-wild-type SOD.     

Reversible unfolding of dimeric phosphofructokinase-2 from Escherichia coli reveals a dominant role of inter-subunit contacts for stability

Escherichia coli phosphofructokinase-2 (Pfk-2) is a homodimer whose subunits consist of a large domain and an additional β-sheet that provides the interfacial contacts between the subunits, creating a β-barrel flattened-like structure with the adjacent subunit’s β-sheet. To determine how the structural organization of Pfk-2 determines its stability, the reversible unfolding of the enzyme was characterized under equilibrium conditions by enzymatic activity, circular dichroism, fluorescence and hydrodynamic measurements. Pfk-2 undergoes a cooperative unfolding/dissociation process with the accumulation of an expanded and unstructured monomeric intermediate with a marginal stability and a large solvent accessibility with respect to the native dimer.     

pH effects on the stability and dimerization of procaspase-3

pH-dependent conformational changes are known to occur in dimeric procaspase-3, and they have been shown to affect the rate of automaturation. We studied the equilibrium unfolding of procaspase-3(C163S) as a function of pH (between pH 8.5 and pH 4) in order to examine these changes in the context of folding and stability. The data show that the procaspase dimer undergoes a pH-dependent dissociation below pH 5, so that the protein is mostly monomeric at pH 4. Consistent with this, the dimer unfolds via a four-state process between pH 8.5 and pH 4.75, in which the native dimer isomerizes to a dimeric intermediate, and the dimeric intermediate dissociates to a monomer, which then unfolds. In contrast, a small protein concentration dependence was observed by circular dichroism, but not by fluorescence emission, at pH 4.5 and pH 4.2. There was no protein-concentration dependence to the data collected at pH 4. Overall, the results are consistent with the redistribution of the population of native dimer (N(2)) to dimeric intermediate (I(2)) to monomeric intermediate (I), as the pH is lowered so that at pH 4, the "native" ensemble resembles the monomeric intermediate (I) observed during unfolding at higher pH. An emerging picture of the monomeric procaspase is discussed. Procaspase-3 is most stable at pH approximately 7 (24-26 kcal/mol), and while the stability decreased with pH, it was observed that dimerization contributes the majority (>70%) of the conformational free energy.     

Unfolding and refolding of dimeric creatine kinase equilibrium and kinetic studies.

Equilibrium and kinetic studies of the guanidine hydrochloride induced unfolding-refolding of dimeric cytoplasmic creatine kinase have been monitored by intrinsic fluorescence, far ultraviolet circular dichroism, and 1-anilinonaphthalene-8-sulfonate binding. The GuHCl induced equilibrium-unfolding curve shows two transitions, indicating the presence of at least one stable equilibrium intermediate in GuHCl solutions of moderate concentrations. This intermediate is an inactive monomer with all of the thiol groups exposed. The thermodynamic parameters obtained by analysis using a three-state model indicate that this intermediate is similar in energy to the fully unfolded state. There is a burst phase in the refolding kinetics due to formation of an intermediate within the dead time of mixing (15 ms) in the stopped-flow apparatus. Further refolding to the native state after the burst phase follows biphasic kinetics. The properties of the burst phase and equilibrium intermediates were studied and compared. The results indicate that these intermediates are similar in some respects, but different in others. Both are characterized by pronounced secondary structure, compact globularity, exposed hydrophobic surface area, and the absence of rigid side-chain packing, resembling the "molten globule" state. However, the burst phase intermediate shows more secondary structure, more exposed hydrophobic surface area, and more flexible side-chain packing than the equilibrium intermediate. Following the burst phase, there is a fast phase corresponding to folding of the monomer to a compact conformation. This is followed by rapid assembly to form the dimer. Neither of the equilibrium unfolding transitions are protein concentration dependent. The refolding kinetics are also not concentration dependent. This suggests that association of the subunits is not rate limiting for refolding, and that under equilibrium conditions, dissociation occurs in the region between the two unfolding transitions. Based upon the above results, schemes of unfolding and refolding of creatine kinase are proposed.     

Thermal unfolding of triosephosphate isomerase from Entamoeba histolytica: dimer dissociation leads to extensive unfolding

In mesophiles, triosephosphate isomerase (TIM) is an obligated homodimer. We have previously shown that monomeric folding intermediates are common in the chemical unfolding of TIM, where dissociation provides 75% of the overall conformational stability of the dimer. However, analysis of the crystallographic structure shows that, during unfolding, intermonomeric contacts contribute to only 5% of the overall increase in accessible surface area. In this work several methodologies were used to characterize the thermal dissociation and unfolding of the TIM from Entamoeba histolytica (EhTIM) and a monomeric variant obtained by chemical derivatization (mEhTIM). During EhTIM unfolding, sequential transitions corresponding to dimer dissociation into a compact monomeric intermediate followed by unfolding and further aggregation of the intermediate occurred. In the case of mEhTIM, a single transition, analogous to the second transition of EhTIM, was observed. Calorimetric, spectroscopic, hydrodynamic, and functional evidence shows that dimer dissociation is not restricted to localized interface reorganization. Dissociation represents 55% (DeltaH(Diss) = 146.8 kcal mol(-1)) of the total enthalpy change (DeltaH(Tot) = 266 kcal mol(-1)), indicating that this process is linked to substantial unfolding. We propose that, rather than a rigid body process, subunit assembly is best represented by a fly-casting mechanism. In TIM, catalysis is restricted to the dimer; therefore, the interface can be viewed as the final nucleation motif that directs assembly, folding, and function.     

Factor XIa dimer in the activation of factor IX

Factor XI, unlike other coagulation proteins, is a homodimer of two identical subunits linked by a single disulfide bond formed by Cys321. The present study was undertaken to understand the physiological significance of the dimeric nature of factor XI. We have expressed a mutant FXI/G326C in which the Gly326 residue of factor XI has been mutated to Cys326, reasoning that Cys321 would form an intrachain disulfide bond with Cys326 as in prekallikrein, a plasma protein that exists as a monomer even with 58% amino acid sequence identity and a domain structure very similar to factor XI. No free thiol could be detected in the expressed protein, and it migrated as a monomer on nonreduced SDS-PAGE. In physiological buffer, however, the protein was found to exist in a state of monomer-dimer equilibrium as assessed by gel-filtration chromatography and ultracentrifugation studies (K(d) approximately 36 nM). Functional studies revealed that FXI/G326C was indistinguishable from plasma factor XI in a plasma-clotting assay and in a factor IX activation assay both in the presence and absence of activated platelets even at concentrations at which less than 5% of the mutant exists as dimers. We conclude that, for optimal function in the presence of activated platelets, a preformed dimer of factor XI is not required.     

Denaturational stress induces formation of zinc-deficient monomers of Cu,Zn superoxide dismutase: implications for pathogenesis in amyotrophic lateral sclerosis

Mutations in the Cu,Zn superoxide dismutase (SOD1) cause a subset of amyotrophic lateral sclerosis cases. SOD1 is a homodimer in which each monomer binds one copper atom and one zinc atom. Mutation is believed to increase the conformational flexibility of SOD1, giving rise to a misfolded SOD1 population with novel cytotoxic properties. While SOD1's metal ligands affect its stability greatly, little is known about the role these metals play in the folding, unfolding, and misfolding processes. Here, we present a method by which we were able to measure the rates of metal release during SOD1 unfolding in guanidine hydrochloride. Rates of dimer dissociation, measured by a time-resolved cross-linking assay, and conformational changes in SOD1's β-barrel core, monitored by tryptophan fluorescence intensity, were compared with the rates of copper release and zinc release. Correlations were observed across a range of denaturant concentrations, giving rise to a more detailed model of the SOD1 unfolding process than was previously available. According to this model, the major unfolding pathway involves simultaneous dimer dissociation and zinc release as an early step that is followed by a slow conformational change in the protein's core, which, in turn, is followed by rapid copper release. This model establishes a zinc-deficient, copper-loaded SOD1 monomer as a well-populated SOD1 unfolding intermediate and a species likely to be populated under conditions of denaturational stress. Because the cytotoxicity of zinc-deficient SOD1 has been demonstrated previously, this species is a good candidate for the cytotoxic species in SOD1-associated amyotrophic lateral sclerosis.     

Pyrococcus furiosus ferredoxin is a functional dimer

Pyrococcus furiosus ferredoxin is subject to a monomer/dimer equilibrium as a function of ionic strength. At physiological ionic strength, approximately 0.35 M NaCl, the protein is very predominantly homodimer. The monomeric form exhibits impaired electron transfer on glassy carbon; it also has a decreased S=3/2 over S=1/2 ratio as shown by electron paramagnetic resonance spectroscopy. Even following sterilization at 121 degrees C the dimer is stable in denaturing gel electrophoresis.     

Folding of Escherichia coli DsbC: characterization of a monomeric folding intermediate

The homodimeric protein DsbC is a disulfide isomerase and a chaperone located in the periplasm of Escherichia coli. We have studied the guanidine hydrochloride (GdnHCl)-induced unfolding and refolding of DsbC using mutagenesis, intrinsic fluorescence, circular dichroism spectra, size-exclusion chromatography, and sedimentation velocity analysis. The equilibrium refolding and unfolding of DsbC was thermodynamically reversible. The equilibrium folding profile measured by fluorescence excited at 280 nm exhibited a three-state transition profile with a stable folding intermediate formed at 0-2.0 M GdnHCl followed by a second transition at higher GdnHCl concentrations. Sedimentation velocity data revealed dissociation of the dimer to the monomer over the concentration range of the first transition (0-2.0 M). In contrast, fluorescence emission data for DsbC excited at 295 nm showed a single two-state transition. Fluorescence emission data for the equilibrium unfolding of the monomeric G49R mutant, excited at either 295 or 280 nm, indicated a single two-state transition. Data obtained for the dimeric Y52W mutant indicated a strong protein concentration dependence of the first transition but no dependence of the second transition in equilibrium unfolding. This suggests that the fluorescence of Y52W sensitively reports conformational changes caused by dissociation of the dimer. Thus, the folding of DsbC follows a three-state transition model with a monomeric folding intermediate formed in 0-2.0 M GdnHCl. The folding of DsbC in the presence of DTT indicates an important role for the non-active site disulfide bond in stabilizing the conformation of the molecule. Dimerization ensures the performance of chaperone and isomerase functions of DsbC.     

The crystal structure at 2A resolution of the Ca2+ -binding protein S100P

S100P is a small calcium-binding protein of the S100 EF-hand-containing family of proteins. Elevated levels of its mRNA are reported to be associated with the progression to hormone independence and metastasis of prostate cancer and to be associated with loss of senescence in human breast epithelial cells in vitro. The first structure of human recombinant S100P in calcium-bound form is now reported at 2.0A resolution by X-ray diffraction. A flexible linker connects the two EF-hand motifs. The protein exists as a homodimer formed by non-covalent interactions between large hydrophobic areas on monomeric S100P. Experiments with an optical biosensor to study binding parameters of the S100P monomer interaction showed that the association rate constant was faster in the presence of calcium than in their absence, whereas the dissociation rate constant was independent of calcium. The K(d) values were 64(+/-24)nM and 2.5(+/-0.8) microM in the presence and in the absence of calcium ions, respectively. Dimerization of S100P is demonstrated in vivo using the yeast two-hybrid system. The effect of mutation of specific amino acids suggests that dimerization in vivo can be affected by amino acids on the dimer interface and in the hydrophobic core.     

Unfolding and folding kinetics of amyotrophic lateral sclerosis-associated mutant Cu,Zn superoxide dismutases

More than 110 mutations in dimeric, Cu,Zn superoxide dismutase (SOD) have been linked to the fatal neurodegenerative disease, amyotrophic lateral sclerosis (ALS). In both human patients and mouse model studies, protein misfolding has been implicated in disease pathogenesis. A central step in understanding the misfolding/aggregation mechanism of this protein is the elucidation of the folding pathway of SOD. Here we report a systematic analyses of unfolding and folding kinetics using single- and double-jump experiments as well as measurements as a function of guanidium chloride, protein, and metal concentration for fully metallated (holo) pseudo wild-type and ALS-associated mutant (E100G, G93R, G93A, and metal binding mutants G85R and H46R) SODs. The kinetic mechanism for holo SODs involves native dimer, monomer intermediate, and unfolded monomer, with variable metal dissociation from the monomeric states depending on solution conditions. The effects of the ALS mutations on the kinetics of the holoproteins in guanidium chloride are markedly different from those observed previously for acid-induced unfolding and for the unmetallated (apo) forms of the proteins. The mutations decrease the stability of holo SOD mainly by increasing unfolding rates, which is particularly pronounced for the metal-binding mutants, and have relatively smaller effects on the observed folding kinetics. Mutations also seem to favour increased formation of a Zn-free monomer intermediate, which has been implicated in the formation of toxic aggregates. The results reveal the kinetic basis for the extremely high stability of wild-type holo SOD and the possible consequences of kinetic changes for disease.     

Pressure and denaturants in the unfolding of triosephosphate isomerase: the monomeric intermediates of the enzymes from Saccharomyces cerevisiae and Entamoeba histolytica

Triosephosphate isomerase (TIM) is a dimeric enzyme formed by two identical (beta/alpha)8 barrels. In this work, we compare the unfolding and refolding of the TIMs from Entamoeba histolytica (EhTIM) and baker's yeast (yTIM). A monomeric intermediate was detected in the GdnHCl-induced unfolding of EhTIM. The thermodynamic, spectroscopic, catalytic, and hydrodynamic properties of this intermediate were found to be very similar to those previously described for a monomeric intermediate of yTIM observed in GdnHCl. Monomer unfolding was reversible for both TIMs; however, the dissociation step was reversible in yTIM and irreversible in EhTIM. Monomer unfolding induced by high pressure in the presence of GdnHCl was a reversible process. DeltaGUnf, DeltaVUnf, and P1/2 were obtained for the 0.7-1.2 M GdnHCl range. The linear extrapolation of these thermodynamic parameters to the absence of denaturant showed the same values for both intermediates. The DeltaVUnfH2O values calculated for EhTIM and yTIM monomeric intermediates are the same within experimental error (-57 +/- 10 and -76 +/- 14 mL/mol, respectively). These DeltaVUnf H2O values are smaller than those reported for the unfolding of monomeric proteins of similar size, suggesting that TIM intermediates are only partially hydrated. |DeltaVUnf| increased with denaturant concentration; this behavior is probably related to structural changes in the unfolded state induced by GdnHCl and pressure. From the thermodynamic parameters that were obtained, it is predicted that in the absence of denaturants, pressure would induce monomer unfolding (P1/2 approximately 140 MPa) prior to dimer dissociation (P1/2 approximately 580 MPa). Therefore, dimerization prevents the pressure unfolding of the monomer.     

Dimeric procaspase-3 unfolds via a four-state equilibrium process.

We have examined the folding and assembly of a catalytically inactive mutant of procaspase-3, a homodimeric protein that belongs to the caspase family of proteases. The caspase family, and especially caspase-3, is integral to apoptosis. The equilibrium unfolding data demonstrate a plateau between 3 and 5 M urea, consistent with an apparent three-state unfolding process. However, the midpoint of the second transition as well as the amplitude of the plateau are dependent on the protein concentration. Overall, the data are well described by a four-state equilibrium model in which the native dimer undergoes an isomeration to a dimeric intermediate, and the dimeric intermediate dissociates to a monomeric intermediate, which then unfolds. By fitting the four-state model to the experimental data, we have determined the free energy change for the first step of unfolding to be 8.3 +/- 1.3 kcal/mol. The free energy change for the dissociation of the dimeric folding intermediate to two monomeric intermediates is 10.5 +/- 1 kcal/mol. The third step in the unfolding mechanism represents the complete unfolding of the monomeric intermediate, with a free energy change of 7.0 +/- 0.5 kcal/mol. These results show two important points. First, dimerization of procaspase-3 occurs as a result of the association of two monomeric folding intermediates, demonstrating that procaspase-3 dimerization is a folding event. Second, the stability of the dimer contributes significantly to the conformational free energy of the protein (18.8 of 25.8 kcal/mol).     

Relationship between stability of folding intermediates and amyloid formation for the yeast prion Ure2p: a quantitative analysis of the effects of pH and buffer system

The dimeric yeast protein Ure2 shows prion-like behaviour in vivo and forms amyloid fibrils in vitro. A dimeric intermediate is populated transiently during refolding and is apparently stabilized at lower pH, conditions suggested to favour Ure2 fibril formation. Here we present a quantitative analysis of the effect of pH on the thermodynamic stability of Ure2 in Tris and phosphate buffers over a 100-fold protein concentration range. We find that equilibrium denaturation is best described by a three-state model via a dimeric intermediate, even under conditions where the transition appears two-state by multiple structural probes. The free energy for complete unfolding and dissociation of Ure2 is up to 50 kcal mol(-1). Of this, at least 20 kcal mol(-1) is contributed by inter-subunit interactions. Hence the native dimer and dimeric intermediate are significantly more stable than either of their monomeric counterparts. The previously observed kinetic unfolding intermediate is suggested to represent the dissociated native-like monomer. The native state is stabilized with respect to the dimeric intermediate at higher pH and in Tris buffer, without significantly affecting the dissociation equilibrium. The effects of pH, buffer, protein concentration and temperature on the kinetics of amyloid formation were quantified by monitoring thioflavin T fluorescence. The lag time decreases with increasing protein concentration and fibril formation shows pseudo-first order kinetics, consistent with a nucleated assembly mechanism. In Tris buffer the lag time is increased, suggesting that stabilization of the native state disfavours amyloid nucleation.     

Apple four in human blood coagulation factor XI mediates dimer formation.

Human blood coagulation factor XI is a dimer composed of two identical subunits. Each subunit contains four apple domains as tandem repeats followed by a serine protease region. A disulfide bridge between Cys321 of each fourth apple domain links the subunits together. The role of Cys321 in the dimerization of factor XI was examined by mutagenesis followed by expression of its cDNA in baby hamster kidney cells. The recombinant proteins were then purified from the tissue culture medium and shown to have full biological activity. Normal recombinant factor XI was secreted as a dimer as determined by SDS-PAGE, while recombinant factor XI-Cys321 Ser migrated as a monomer under these conditions. Gel filtration studies, however, revealed that each protein existed as a dimer under native conditions, indicating that the disulfide bond between Cys321 of each factor XI monomer was not necessary for dimer formation. The fourth apple domain (apple4) of factor XI was then introduced into tissue plasminogen activator (tPA) to investigate its role in the dimerization of other polypeptide chains. The fusion protein, containing apple4 (apple4-tPA), formed dimers as detected by SDS-PAGE and gel filtration. Furthermore, dimerization was specific to apple4, while apple3 had no effect on dimerization. These data further indicated that the apple4 domain of factor XI mediates dimerization of the two subunits and the interchain disulfide bond involving Cys321 was not essential for dimer formation.     

Conformational stability of dimeric and monomeric forms of the C-terminal domain of human immunodeficiency virus-1 capsid protein

The unfolding equilibrium of the C-terminal domain of human immunodeficiency virus-1 (HIV-1) capsid protein has been analyzed by circular dichroism and fluorescence spectroscopy. The results for the dimeric, natural domain are consistent with a three-state model (N(2)<-->2I<-->2U). The dimer (N(2)) dissociates and partially unfolds in a coupled cooperative process, into a monomeric intermediate (I) of very low conformational stability. This intermediate, which is the only significantly populated form at low (1 microM) protein concentrations, fully preserves the secondary structure but has lost part of the tertiary (intramonomer) interactions found in the dimer. In a second transition, the intermediate cooperatively unfolds into denatured monomer (U). The latter process is the equivalent of a two-state unfolding transition observed for a monomeric domain in which Trp184 at the dimer interface had been truncated to Ala. A highly conserved, disulfide-bonded cysteine, but not the disulfide bond itself, and three conserved residues within the major homology region of the retroviral capsid are important for the conformational stability of the monomer. All these residues are involved also in the association process, despite being located far away from the dimerization interface. It is proposed that dimerization of the C-terminal domain of the HIV-1 capsid protein involves induced-fit recognition, and the conformational reorganization also improves substantially the low intrinsic stability of each monomeric half.     

Accessing the global minimum conformation of stefin A dimer by annealing under partially denaturing conditions.

Stefin A folds as a monomer under strongly native conditions. We have observed that under partially denaturing conditions in the temperature range from 74 to 93 degrees C it folds into a dimer, while it is monomeric above the melting temperature of 95 degrees C. Below 74 degrees C the dimer is trapped and it does not dissociate. The dimer is a folded and structured protein as judged by CD and NMR, nevertheless it is no more functional as an inhibitor of cysteine proteases. The monomer-dimer transition proceeds at a slow rate and the activation energy of dimerization at 99 kcal/mol is comparable to the unfolding enthalpy. A large and negative dimerization enthalpy of -111(+/- 8) kcal/mol was calculated from the temperature dependence of the dissociation constant. An irreversible pretransition at 10-15 deg. below the global unfolding temperature has been observed previously by DSC and can now be assigned to the monomer-dimer transition. Backbone resonances of all the dimer residues were assigned using 15N isotopically enriched protein. The dimer is symmetric and the chemical shift differences between the monomer and dimer are localized around the tripartite hydrophobic wedge, which otherwise interacts with cysteine proteases. Hydrogen exchange protection factors of the residues affected by dimer formation are higher in the dimer than in the monomer. The monomer to dimer transition is accompanied by a rapid exchange of all of the amide protons which are protected in the dimer, indicating that the transition state is unfolded to a large extent. Our results demonstrate that the native monomeric state of stefin A is actually metastable but is favored by the kinetics of folding. The substantial energy barrier which separates the monomer from the more stable dimer traps each state under native conditions.