Precipitation by polycation as capture step in purification of plasmid DNA from a clarified lysate

The demand for highly purified plasmids in gene therapy and plasmid-based vaccines requires large-scale production of pharmaceutical-grade plasmid. Large-scale purification of plasmid DNA from bacterial cell culture normally includes one or several chromatographic steps. Prechromatographic steps include precipitation with solvents, salts, and polymers combined with enzymatic degradation of nucleic acids. No method alone has so far been able to selectively capture plasmid DNA directly from a clarified alkaline lysate. We present a method for selective precipitation of plasmid DNA from a clarified alkaline lysate using polycation poly(N, N'-dimethyldiallylammonium) chloride (PDMDAAC). The specific interaction between the polycation and the plasmid DNA resulted in the formation of a stoichiometric insoluble complex. Efficient removal of contaminants such as RNA, by far the major contaminant in a clarified lysate, and proteins as well as 20-fold plasmid concentration has been obtained with about 80% recovery. The method utilizes a inexpensive, commercially available polymer and thus provides a capture step suitable for large-scale production.     

Polyelectrolyte complexes as a tool for purification of plasmid DNA. Background and development

The demand for highly purified plasmids in gene therapy and plasmid-based vaccines requires large-scale production of pharmaceutical-grade plasmid. Plasmid DNA was selectively precipitated from a clarified alkaline lysate using the polycation poly(N,N'-dimethyldiallylammonium) chloride which formed insoluble polyelectrolyte complex (PEC) with the plasmid DNA. Soluble PECs of DNA with polycations have earlier been used for cell transformation, but now the focus has been on insoluble PECs. Both DNA and RNA form stable PECs with synthetic polycations. However, it was possible to find a range of salt concentration where plasmid DNA was quantitatively precipitated whereas RNA remained in solution. The precipitated plasmid DNA was resolubilised at high salt concentration and the polycation was removed by gel-filtration.     

Conjugal transfer of plasmids and antibiotic resistance among Escherichia coli isolated from animals in a rural area in Sarawak (Malaysia)

Thirty-six strains of Escherichia coli isolated from animals in Bario, a remote area in Sarawak, Malaysia, were examined for presence of plasmid DNA and their susceptibility to nine antimicrobial agents. Of the total 36 isolates, five bovine and six canine isolates were found to contain plasmid DNA ranging in sizes from 2.6 to 70 kilobases. All were susceptible to chloramphenicol, erythromycin, gentamicin, nalidixic acid and neomycin but resistance to ampicillin (47%), erythromycin (19%), streptomycin (25%) and tetracycline (11%) was observed. Resistance was associated with carriage of a 47 kb (SC98), 70 kb, (SC133) and 56 and 4.6 kb (SC119) plasmids which were transmissible to the Escherichia coli K12 recipient. It is concluded that animals form a potential reservoir of R plasmids carrying E. coli in the study area.     

Evidence for the presence of plasmids in four therapeutically important strains of Lactobacillus acidophilus

Four therapeutically important strains of Lactobacillus acidophilus designated as R, 301, 1899 and NCFM were screened for the presence of plasmids. Two lysis methods were used for the isolation of plasmid DNA: an alkaline method and a more gentle technique. It was found that the gentle lysis method yielded better plasmid DNA both quantitatively and qualitatively. All four strains studied apparently possess plasmids. The strains 301 and NCFM possessed one plasmid each, with a size of 4.2 kb, whereas R possessed three plasmids (3.5, 2.4 and 2.1 kb) and 1899 possessed two plasmids (4.1 and 4.2 kb). Restriction analysis revealed that the plasmid DNA from strain R was cleaved by Bam HI but not by Hin d III and Eco RI. The plasmid DNA from the remaining three strains was cleaved by all three restriction enzymes used.     

Degradation of supercoiled plasmid DNA within a capillary device

Supercoiled plasmid DNA is susceptible to fluid stress in large-scale manufacturing processes. A capillary device was used to generate controlled shear conditions and the effects of different stresses on plasmid DNA structure were investigated. Computational fluid dynamics (CFD) analysis was employed to characterize the flow environment in the capillary device and different analytical techniques were used to quantify the DNA breakage. It was found that the degradation of plasmid DNA occurred at the entrance of the capillary and that the shear stress within the capillary did not affect the DNA structure. The degradation rate of plasmids was well correlated with the average elongational strain rate or the pressure drop at the entrance region. The conclusion may also be drawn that laminar shear stress does not play a significant role in plasmid DNA degradation.     

Large-scale purification of plasmid DNA by fast protein liquid chromatography using a Hi-Load Q Sepharose column.

The large-scale purification of plasmid DNA was achieved using fast protein liquid chromatography on a Hi-Load Q Sepharose column. This method allows for the purification of plasmids starting from crude plasmid DNA, prepared by a simple alkaline lysis procedure, to pure DNA in less than 5 h. In contrast to the previously described plasmid purification methods of CsCl gradient centrifugation or high-pressure liquid chromatography, this method does not require the use of any hazardous or expensive chemicals. More than 100 plasmids varying in size from 3 to 15 kb have been purified using this procedure. A Mono Q Sepharose column was initially used to purify plasmids smaller than 8.0 kb; however, a Hi-Load Q Sepharose column proved more effective with plasmids larger than 8 kb. The loading of plasmids larger than 8 kb on the Mono Q column resulted in a high back pressure and the plasmid DNA could not be eluted from the column. Thus, for routine purification we utilize the Hi-Load Q Sepharose column. Plasmids purified by this method had purity, yield, and transfection efficiency in mammalian cells similar to those of plasmids purified by CsCl density gradient centrifugation.     

Purification of plasmids by triplex affinity interaction.

Production of pharmaceutical grade plasmid DNA is an important issue in gene therapy. We developed a method for affinity purification of plasmids by triple helix interaction. This method is based on sequence-specific binding of an oligonucleotide immobilized on a large pore chromatography support to a target sequence on the plasmid. Using design criteria derived from thermodynamic data, we produced a 15mer target sequence which binds strongly to the affinity support under mildly acidic conditions. Plasmid DNA was purified from clarified Escherichia coli lysate by incubation with the affinity beads at pH 5.0 and high NaCl concentration. After extensive washing of the beads, purified plasmid DNA was eluted with alkaline buffer. The purified plasmid showed no RNA or cell DNA contamination in HPLC analysis and total protein concentration was reduced considerably. Due to its mechanical stability and porosity this support can be used in a continuous affinity purification process, which has a high potential for scale up.     

Impact of engineering flow conditions on plasmid DNA yield and purity in chemical cell lysis operations

Chemical lysis of bacterial cells using an alkaline solution containing a detergent may provide an efficient scalable means for selectively removing covalently closed circular plasmid DNA from high-molecular-weight contaminating cellular components including chromosomal DNA. In this article we assess the chemical lysis of E. coli cells by SDS in a NaOH solution and determine the impact of pH environment and shear on the supercoiled plasmid and chromosomal DNA obtained. Experiments using a range of plasmids from 6 kb to 113 kb determined that in an unfavorable alkaline environment, where the NaOH concentration during lysis is greater than 0.15 +/- 0.03 M (pH 12.9 +/- 0.2), irreversible denaturation of the supercoiled plasmid DNA occurs. The extent of denaturation is shown to increase with time of exposure and NaOH concentration. Experiments using stirred vessels show that, depending on NaOH concentration, moderate to high mixing rates are necessary to maximize plasmid yield. While NaOH concentration does not significantly affect chromosomal DNA contamination, a high NaOH concentration is necessary to ensure complete conversion of chromosomal DNA to single-stranded form. In a mechanically agitated lysis reactor the correct mixing strategy must balance the need for sufficient mixing to eliminate potential regions of high NaOH concentrations and the need to avoid excessive breakage of the shear sensitive chromosomal DNA. The effect of shear on chromosomal DNA is examined over a wide range of shear rates (10(1)-10(5) s(-1)) demonstrating that, while increasing shear leads to fragmentation of chromosomal DNA to smaller sizes, it does not lead to significantly increased chromosomal DNA contamination except at very high shear rates (about 10(4)-10(5) s(-1)). The consequences of these effects on the choice of lysis reactor and scale-up are discussed.     

Study of mechanisms of electric field-induced DNA transfection. III. Electric parameters and other conditions for effective transfection.

Electric parameters, osmolality, temperature, and pH of the suspending medium and the growth phase of cells, etc., are known to influence the efficiency of the pulsed electric field (PEF)-induced DNA transfection of cells. PEF-induced transfection of Escherichia coli JM105 by plasmid DNA PUC18, PUC19, PBR322, and PMSG has been used as a model system to establish quantitative relationships between these parameters and transfection efficiency. The main findings are summarized for experiments using unipolar square wave PEF. (a) For a given field strength (up to 6 kV/cm), the transfection efficiency (TE) was linearly dependent on the pulse width (up to 1 ms). (b) When field strength is fixed, Log [TE] correlated with the number of pulses applied. Similarly, when field duration was fixed, Log [TE] correlated with the number of pulses. (c) In the absence of MgCl2, TE showed a maximal value at 50 mM sucrose and was reduced by several fold at lower and higher sucrose concentrations. Cell survival was nearly constant in the range 1-300 mM sucrose. (d) E. coli in the early and mid-exponential growth phases was more susceptible to PEF for DNA transfection than it was in the stationary phase. (e) For a given set of electric parameters, TE was the highest at neutral pH and was greatly reduced at acidic and alkaline pH. (f) Increasing the temperature from 0 to 37 degrees C resulted in the reduction of TE by three orders of magnitude. This could reflect a rapid shrinking of pores at higher temperatures. (g) TE was inversely proportional to the square of the size of the plasmid DNA.(ABSTRACT TRUNCATED AT 250 WORDS)     

Interaction of nucleolar phosphoprotein C23 with cloned segments of rat ribosomal deoxyribonucleic acid

Protein C23, a predominant nucleolar phosphoprotein and a putative nucleolus organizer protein, was analyzed for its general DNA binding characteristics and for its selectivity in binding plasmid DNAs containing cloned fragments of the genes that code for ribosomal RNA (rDNA). By use of nitrocellulose filter disk assays, the protein bound saturably to nuclear DNA with a relatively high affinity. Binding was maximal at low ionic strength (0-0.1 M KCl) with progressively decreasing binding at or above 0.2 M. In competition assays protein C23 showed a marked preference for linear single-stranded vs. double-stranded DNA and little or no affinity for ribosomal RNA. The relative affinities of rDNA sequences for protein C23 were determined with cloned fragments spanning 15.8 kilobases (kb) of DNA starting approximately 3.7 kb upstream from the initiation site for 45S preribosomal RNA to near the 3' end of the sequence coding for 28S RNA. Of the five linearized plasmids tested, only one (pKW1) was an effective competitor for 32P-labeled nuclear DNA. As measured by the concentration of competing DNA required to achieve 50% competition, pKW1 was approximately 20-fold more effective than the second best competitor. The DNA insert in pKW1 is a 3.5-kb sequence which is located in the nontranscribed spacer region less than 0.5 kb upstream from the initiation site for 45S preribosomal RNA. These results suggest that protein C23 has a preference for binding DNA sequences in the nontranscribed spacer of rDNA.     

High Performance DNA Purification using a Novel Ion Exchange Matrix

Ion exchange chromatography has emerged as a reliable alternative to classic CsCl-ethidium bromide gradients for isolating nucleic acids of the highest purity. A plasmid purification method based on a unique anion exchange membrane (IEXM) was developed for the production of superior quality plasmids. This method was simpler and more efficient than conventional bead-based methods. Plasmids were extracted from bacterial cells through alkaline lysis. The crude lysate was clarified by a sequential filtration device that not only removed cell debris but micellar aggregates as well. The clarified lysate was mixed with an extraction solution and loaded into a spin column containing IEXM. Binding, washing, and elution conditions were optimized to achieve efficient isolation of plasmids from the impurities. IEXM had an exceedingly high dynamic binding capacity, excellent selectivity, and a near 100% recovery for plasmids. The binding capacity for pUC19 was 2.93 mg/cm³ of IEXM, which is several times greater than the values for conventional ion exchange beads. The superior selectivity of the method was reflected in the extremely low levels of endotoxin, and thus it is well-suited for critical applications in eukaryotic systems.     

Indigenous plasmids in Pseudomonas syringae pv. tomato: conjugative transfer and role in copper resistance

Twenty strains of Pseudomonas syringae pv. tomato were examined for the presence of plasmid DNA. P. syringae pv. tomato plasmids were grouped into five size classes: class A ranged from 95 to 103 kilobases (kb); class B ranged from 71 to 83 kb; class C ranged from 59 to 67 kb; class D ranged from 37 to 39 kb; and class E was 29 kb. All strains contained at least two plasmids in classes A and B. The conjugative ability of P. syringae pv. tomato plasmids in three strains was demonstrated by mobilization of the nonconjugative plasmid RSF1010 into Pseudomonas syringae pv. syringae recipients. Plasmids from the three conjugative strains were labeled with Tn5. Four conjugative plasmids were identified by their repeated transfer to P. syringae pv. syringae recipients. P. syringae pv. tomato strains varied in sensitivity to copper sulfate (CuSO4): MICs were 0.4 to 0.6 mM for sensitive strains, 1.2 mM for moderately resistant strains, and 1.6 to 2.0 mM for very resistant strains. One very resistant strain, PT23, functioned as a donor of copper resistance. Recipient P. syringae pv. syringae strains PS51 and PS61 were inhibited by 0.1 mM CuSO4, whereas the CuSO4 MICs for transconjugant strains PS51(pPT23A) and PS61(pPT23C) were 1.8 and 2.6 mM, respectively. P. syringae pv. tomato strains PT12.2 and PT17.2 were inhibited by 0.6 mM copper sulfate, but their copper sulfate MICs were 2.6 and 1.8 mM, respectively, when they acquired pPT23C. Therefore, copper resistance in PT23 was controlled by two conjugative plasmids, designated pPT23A (101 kb) and pPT23C (67 kb).     

Genetic determinants of active antibiotic-producing soil streptomycetes.

Plasmids or covalently closed circular (CCC)-DNA molecules are abundant in the genus Streptomyces, and have been suggested to be involved in the genetic control of the production of many antibiotics in these organisms. In this study, 21 active antibiotic-producing Streptomyces isolates were screened for their plasmid content by an alkaline lysis method which revealed the presence of a small plasmid DNA in the positive control Streptomyces lividans ATCC 35287, containing pIJ702 plasmid (5.65 kb in size). However, no low molecular weight plasmids were observed in the tested antibiotic-producing Streptomyces strains suggesting that antibiotic production in these strains is likely chromosomally encoded DNA. Treatment of 2 Streptomyces strains with 10 mM ethidium bromide (EB) resulted in the failure to produce aerial mycelia and antibiotic activity.     

Vector PCR.

A strategy employing PCR technology to facilitate the amplification of DNA segments inserted in plasmid vectors is described. Nine oligonucleotide primers specific for vector sequences bracketing cloning sites in seven commonly used vectors were designed. We used these primers for the amplification of 25 different inserts ranging in size from 0.4-4.8 kb. Vector PCR-generated products used as radiolabeled DNA probes in Southern hybridization compared favorably with conventionally prepared probes. This strategy was successfully applied to single colonies of bacteria containing recombinant plasmids for direct amplification of the plasmids insert from the bacterial lysate. Vector PCR enabled the production of microgram quantities of DNA from limited amounts of starting material without the time-consuming steps required for bacterial culture and purification of plasmid DNA. The amplification reaction is independent of the DNA segment to be amplified, rendering the method universally applicable.     

Process optimisation for anion exchange monolithic chromatography of 4.2 kbp plasmid vaccine (pcDNA3F)

Anion exchange monolithic chromatography is increasingly becoming a prominent tool for plasmid DNA purification but no generic protocol is available to purify all types of plasmid DNA. In this work, we established a simple framework and used it to specifically purify a plasmid DNA model from a clarified alkaline-lysed plasmid-containing cell lysate. The framework involved optimising ligand functionalisation temperature (30–80 °C), mobile phase flow rate (0.1–1.8 mL/min), monolith pore size (done by changing the porogen content in the polymerisation reaction by 50–80%), buffer pH (6–10), ionic strength of binding buffer (0.3–0.7 M) and buffer gradient elution slope (1–10% buffer B/min). We concluded that preferential pcDNA3F adsorption and optimum resolution could be achieved within the tested conditions by loading the clarified cell lysate into 400 nm pore size of monolith in 0.7 M NaCl (pH 6) of binding buffer followed by increasing the NaCl concentration to 1.0 M at 3%B/min.     

Modulation of the DNA scanning activity of the Micrococcus luteus UV endonuclease

Micrococcus luteus UV endonuclease incises DNA at the sites of ultraviolet (UV) light-induced pyrimidine dimers. The mechanism of incision has been previously shown to be a glycosylic bond cleavage at the 5'-pyrimidine of the dimer followed by an apyrimidine endonuclease activity which cleaves the phosphodiester backbone between the pyrimidines. The process by which M. luteus UV endonuclease locates pyrimidine dimers within a population of UV-irradiated plasmids was shown to occur, in vitro, by a processive or "sliding" mechanism on non-target DNA as opposed to a distributive or "random hit" mechanism. Form I plasmid DNA containing 25 dimers per molecule was incubated with M. luteus UV endonuclease in time course reactions. The three topological forms of plasmid DNA generated were analyzed by agarose gel electrophoresis. When the enzyme encounters a pyrimidine dimer, it is significantly more likely to make only the glycosylase cleavage as opposed to making both the glycosylic and phosphodiester bond cleavages. Thus, plasmids are accumulated with many alkaline-labile sites relative to single-stranded breaks. In addition, reactions were performed at both pH 8.0 and pH 6.0, in the absence of NaCl, as well as 25,100, and 250 mM NaCl. The efficiency of the DNA scanning reaction was shown to be dependent on both the ionic strength and pH of the reaction. At low ionic strengths, the reaction was shown to proceed by a processive mechanism and shifted to a distributive mechanism as the ionic strength of the reaction increased. Processivity at pH 8.0 is shown to be more sensitive to increases in ionic strength than reactions performed at pH 6.0.     

Separation of supercoiled from open circular forms of plasmid DNA,and biological activity detection

To establish a cost-effective purification process for the large-scale production of plasmid DNA for gene therapy and DNA vaccination, a single anion-exchange chromatography (AEC) step was employed to purify supercoiled plasmid DNA (sc pDNA) from other isoforms and Escherichia coli impurities present in a clarified lysate. Two different size and conformation plasmids were used as model targets, and showed similar elution behavior in this chromatographic operation, in which sc pDNA was effectively separated from open circle plasmid DNA (oc pDNA) in a salt gradient. The process delivered high-purity pDNA of homogeneity of 95 ± 1.1% and almost undetectable levels of endotoxins, genomic DNA, RNA and protein, at a yield of 65 ± 8%. Furthermore, the transfection efficiency (29 ± 0.4%) was significantly higher than that (20 ± 0.1%) of a pDNA control. The present study confirms the possibility of using a single AEC step to purify sc pDNA from other isoforms and host contaminants present in a clarified E. coli lysate.     

Compaction agent protection of nucleic acids during mechanical lysis

Mechanical lysis is an efficient and widely used method of liberating the contents of microbial cells, but the sensitivity of large nucleic acids to shear damage has prevented the application of mechanical lysis to DNA purification. It is demonstrated that polycationic compaction agents can protect DNA from shear damage and allow chromosomal and plasmid DNA purification by mechanical lysis. In addition to being substantially protected during mechanical lysis, the compacted DNA can be separated with the insoluble cell debris, washed, and selectively resolubilized, yielding a substantially purified DNA product. An additional benefit of this method is that lysate viscosity is greatly reduced, allowing the use of much smaller processing volumes when compared with traditional lysis methods used in nucleic acid purification.     

Quantitation of supercoiled circular content in plasmid DNA solutions using a fluorescence-based method

A method for quantifying the proportion of supercoiled circular (SC) forms in DNA solutions is described. The method (SCFluo) takes advantage of the reversible denaturation property of SC forms and the high specificity of the PicoGreen fluorochrome for double-stranded (ds)DNA. Fluorescence values of forms capable of reversible denaturation after a 5 min heating, 2 min cooling step are normalised to fluorescence values of total dsDNA present in the preparation. For samples with a SC content >20–30%, good regression fits were obtained when values derived from densitometric scanning of an agarose gel and those derived from the SCFluo method were compared. The method represents an attractive alternative to currently established methods because it is simple, rapid and quantitative. During large-scale processing and long-term storage, enzymatic, chemical and shear degradation may substantially decrease the SC content of plasmid DNA preparations. Regulations for pharmaceutical grade products for use in gene therapy and DNA vaccination may require >90% of the plasmid to be in the SC form. In the present study the SC content of 6.9, 13 and 20 kb plasmid preparations that had been subjected to chemical and shear degradation was successfully quantified using the new method.     

Plasmid size can affect the ability of Escherichia coli to produce high-quality plasmids

Large molecular weight plasmids are often used in gene therapy and DNA vaccines. To investigate the effect of plasmid size on the performance of Escherichia coli host strains during plasmid preparation, we employed E. coli JM109 and TOP10 cells to prepare four plasmids ranging from 4.7 to 16.8?kb in size. Each plasmid was extracted from JM109 and TOP10 cells using an alkaline lysis mini-preparation method. However, when commercial kits were used to extract the same plasmids from JM109 cells, the large molecular weight plasmids substantially degraded, compared with their smaller counterparts. No degradation was observed when the four plasmids were extracted from E. coli TOP10 cells using the same commercial kit. We conclude, therefore, that the performance of E. coli in high quality plasmid preparations can be affected by plasmid size.