Microbial community structure in anaerobic co-digestion of grass silage and cow manure in a laboratory continuously stirred tank reactor

The impacts of feeding ratio and loading rate on the microbial community during co-digestion of grass silage with cow manure in an anaerobic laboratory continuously stirred tank reactor were investigated by 16S rRNA gene-based fingerprints. The microbial community remained stable when the reactor was fed with cow manure alone and with up to 20% of grass silage in feedstock at an organic loading rate (OLR) of 2 kg VS m⁻³ day⁻¹. Large changes in the bacterial community were observed when the loading ratio of grass was increased to 40%, while there was little change in the archaeal community. During the increase in OLR from 2 to 4 kg VS m⁻³ day⁻¹ the bacterial community structure showed few differences, whereas Archaea was undetectable. Sequencing of the major DGGE bands indicated that the phylum Bacteriodetes predominated in the bacterial community. Two unclassified bacteria with high abundance survived throughout the operation of the reactor.     

Air-side ammonia stripping coupled to anaerobic digestion indirectly impacts anaerobic microbiome

Air-side stripping without a prior solid–liquid phase separation step is a feasible and promising process to control ammonia concentration in thermophilic digesters. During the process, part of the anaerobic biomass is exposed to high temperature, high pH and aerobic conditions. However, there are no studies assessing the effects of those harsh conditions on the microbial communities of thermophilic digesters. To fill this knowledge gap, the microbiomes of two thermophilic digesters (55°C), fed with a mixture of pig manure and nitrogen-rich co-substrates, were investigated under different organic loading rates (OLR: 1.1–5.2 g COD l⁻¹ day⁻¹), ammonia concentrations (0.2–1.5 g free ammonia nitrogen l⁻¹) and stripping frequencies (3–5 times per week). The bacterial communities were dominated by Firmicutes and Bacteroidetes phyla, while the predominant methanogens were Methanosarcina sp archaea. Increasing co-substrate fraction, OLR and free ammonia nitrogen (FAN) favoured the presence of genera Ruminiclostridium, Clostridium and Tepidimicrobium and of hydrogenotrophic methanogens, mainly Methanoculleus archaea. The data indicated that the use of air-side stripping did not adversely affect thermophilic microbial communities, but indirectly modulated them by controlling FAN concentrations in the digester. These results demonstrate the viability at microbial community level of air side-stream stripping process as an adequate technology for the ammonia control during anaerobic co-digestion of nitrogen-rich substrates.     

Potential cause of aerobic granular sludge breakdown at high organic loading rates

Aerobic sludge granules are compact, strong microbial aggregates that have excellent settling ability and capability to efficiently treat high-strength and toxic wastewaters. Aerobic granules disintegrate under high organic loading rates (OLR). This study cultivated aerobic granules using acetate as the sole carbon and energy source in three identical sequencing batch reactors operated under OLR of 9–21.3 kg chemical oxygen demand (COD) m⁻³ day⁻¹. The cultivated granules removed 94–96% of fed COD at OLR up to 9–19.5 kg COD m⁻³ day⁻¹, and disintegrated at OLR of 21.3 kg COD m⁻³ day⁻¹. Most tested isolates did not grow in the medium at >3,000 mg COD l⁻¹; additionally, these strains lost capability for auto-aggregation and protein or polysaccharide productivity. This critical COD regime correlates strongly with the OLR range in which granules started disintegrating. Reduced protein quantity secreted by isolates was associated with the noted poor granule integrity under high OLR. This work identified a potential cause of biological nature for aerobic granules breakdown.     

Functionally redundant but dissimilar microbial communities within biogas reactors treating maize silage in co-fermentation with sugar beet silage

Numerous observations indicate a high flexibility of microbial communities in different biogas reactors during anaerobic digestion. Here, we describe the functional redundancy and structural changes of involved microbial communities in four lab-scale continuously stirred tank reactors (CSTRs, 39°C, 12 L volume) supplied with different mixtures of maize silage (MS) and sugar beet silage (SBS) over 80 days. Continuously stirred tank reactors were fed with mixtures of MS and SBS in volatile solid ratios of 1:0 (Continuous Fermenter (CF) 1), 6:1 (CF2), 3:1 (CF3), 1:3 (CF4) with equal organic loading rates (OLR 1.25 kgVS m⁻³ d⁻¹) and showed similar biogas production rates in all reactors. The compositions of bacterial and archaeal communities were analysed by 454 amplicon sequencing approach based on 16S rRNA genes. Both bacterial and archaeal communities shifted with increasing amounts of SBS. Especially pronounced were changes in the archaeal composition towards Methanosarcina with increasing proportion of SBS, while Methanosaeta declined simultaneously. Compositional shifts within the microbial communities did not influence the respective biogas production rates indicating that these communities adapted to environmental conditions induced by different feedstock mixtures. The diverse microbial communities optimized their metabolism in a way that ensured efficient biogas production.     

Laboratory scale examination of the effects of overloading on the anaerobic digestion by glycerol

The anaerobic digestion of pure glycerol, which produces a baseline acetic acid to propionic acid ratio of 0.2, was studied in laboratory scale reactors (3 l working volume) at mesophilic temperature (37 °C) with 3000 mg chemical oxygen demand (COD) l⁻¹d⁻¹. During the experiment tVFA and C2-C6 VFA analysis and daily biogas yield measurement were carried out. Following 10 days of a 15% d⁻¹ increase in the organic loading rate (OLR) of 3.0-10.5 g COD l⁻¹d⁻¹, the concentration of propionic acid increased to 6200-8000 mg l⁻¹. Then the inoculum was divided into three parts feeding with 100% glycerol, 50% glycerol + 50% acetic acid, and 50% glycerol + 50% thick stillage, (presented in % of 2.60 g COD l⁻¹d⁻¹ OLR), respectively. The application of co-substrates reduced the recovery period by 5 days compared to feeding with pure glycerol. When the reactors were loaded with glycerol again (10% OLR raise per day) the previously applied co-substrates had a positive effect on the VFA composition and the biogas yield as well.     

Effect of chitosan on UASB treating POME during a transition from mesophilic to thermophilic conditions

The effects of chitosan addition on treatment of palm oil mill effluent were investigated using two lab-scale upflow anaerobic sludge bed (UASB) reactors: (1) with chitosan addition at the dosage of 2 mg chitosan per g volatile suspended solids on the first day of the operation (R1), (2) without chitosan addition (the control, R2). The reactors were inoculated with mesophilic anaerobic sludge which was acclimatized to a thermophilic condition with a stepwise temperature increase of 5 °C from 37 to 57 °C. The OLR ranged from 2.23 to 9.47 kg COD m⁻³ day⁻¹. The difference in biogas production rate increased from non-significant to 18% different. The effluent volatile suspended solids of R1 was 65 mg l⁻¹ lower than that of R2 on Day 123. 16S rRNA targeted denaturing gradient gel electrophoresis (DGGE) fingerprints of microbial community indicated that some methanogens in the genus Methanosaeta can be detected in R1 but not in R2.     

Ammonia threshold for inhibition of anaerobic digestion of thin stillage and the importance of organic loading rate

Biogas production from nitrogen‐rich feedstock results in release of ammonia (NH₃), causing inhibition of the microbial process. The reported threshold ammonia value for stable biogas production varies greatly between studies, probably because of differences in operating conditions. Moreover, it is often difficult to separate the effect of ammonia inhibition from that of organic loading rate (OLR), as these two factors are often interrelated. This study attempted to distinguish the effects of ammonia and OLR by analysis of two laboratory‐scale biogas reactors operating with thin stillage and subjected to an increase in free ammonia (from 0.30 to 1.1 g L^?1) either by addition of an external nitrogen source (urea) or by increasing the OLR (3.2–6.0 g volatile solids L^?1 d^?1). The results showed that ammonia concentration was detrimental for process performance, with the threshold for stability in both processes identified as being about 1 g NH3‐N L^?1, irrespective of OLR. Analysis of the methanogenic community showed limited differences between the two reactors on order level and a clear increase in the abundance of Methanomicrobiales, particularly Methanoculleus sp., in response to increasing ammonia concentration. Further comprehensive molecular analysis revealed that diverse Methanoculleus species dominated in the reactors at a given ammonia level at different OLR. The acetogenic community was clearly affected by both ammonia concentration and OLR, suggesting that the volatile fatty acid load in relation to the higher OLR was important for the dynamics of this community.     

Two-stage biological treatment of olive mill wastewater with whey as co-substrate

Olive mill wastewater (OMW) is a highly polluting wastewater, caused by a high organic load and phenol content. These characteristics suggest that it may be suitable for aerobic treatment and anaerobic bacterial digestion. Aerobic treatment coupled with anaerobic bacterial digestion may be economically feasible as the methane produced is a valuable energy source while simultaneously purifying the OMW. In an attempt to improve the overall performance of the process, the addition of a co-substrate such as whey to the aerobic treatment pre-treatment of OMW by the yeast Candida tropicalis was studied.The two-stage system operated satisfactorily up to an organic loading rate (OLR) of 3.0 kg COD L⁻¹ day⁻¹ with a biogas production rate of 1.25 L_biogas L_reactor⁻¹ day⁻¹ and a total COD reduction in excess of 93% (62% COD reduction in aerobic pretreatment and 83% COD reduction in anaerobic digestion). Fifty-four percent of the phenol was biodegraded during the aerobic treatment stage, and biogas with between 68% and 75% methane was produced during anaerobic digestion.     

Anaerobic digestion of secondary residuals from an anaerobic bioreactor at a brewery to enhance bioenergy generation

Many beer breweries use high-rate anaerobic digestion (AD) systems to treat their soluble high-strength wastewater. Biogas from these AD systems is used to offset nonrenewable energy utilization in the brewery. With increasing nonrenewable energy costs, interest has mounted to also digest secondary residuals from the high-rate digester effluent, which consists of yeast cells, bacteria, methanogens, and small (hemi)cellulosic particles. Mesophilic (37 °C) and thermophilic (55 °C) lab-scale, low-rate continuously-stirred anaerobic digestion (CSAD) bioreactors were operated for 258 days by feeding secondary residuals at a volatile solids (VS) concentration of ∼40 g l⁻¹. At a hydraulic retention time (HRT) of 15 days and a VS loading rate of 2.7 g VS l⁻¹ day⁻¹, the mesophilic bioreactor showed an average specific volumetric biogas production rate of 0.88 l CH₄ l⁻¹ day⁻¹ and an effluent VS concentration of 22.2 g VS l⁻¹ (43.0% VS removal efficiency) while the thermophilic bioreactor displayed similar performances. The overall methane yield for both systems was 0.21 l CH₄ g⁻¹ VS fed and 0.47–0.48 l CH₄ g⁻¹ VS removed. A primary limitation of thermophilic digestion of this protein-rich waste is the inhibition of methanogens due to higher nondissociated (free) ammonia (NH₃) concentrations under similar total ammonium (NH₄ ⁺) concentrations at equilibrium. Since thermophilic AD did not result in advantageous methane production rates or yields, mesophilic AD was, therefore, superior in treating secondary residuals from high-rate AD effluent. An additional digester to convert secondary residuals to methane may increase the total biogas generation at the brewery by 8% compared to just conventional high-rate digestion of brewery wastewater alone. JIMB-2008: BioEnergy—Special issue.     

Methanogenic population dynamics during semi‐continuous biogas fermentation and acidification by overloading

Aims: This study was to investigate the methanogenic community in a biogas reactor from start‐up to acidification conditions. Furthermore, reliability and accuracy of the applied quantitative real‐time PCR method (Q‐PCR) was briefly evaluated. Methods and Results: A mesophilic (37°C), maize silage fed, continuously stirred tank reactor was surveyed. It was operated semi‐continuously with increasing daily organic loading rates (OLRs) to reach acidification. Gas production and organic acid composition were measured. Methanogenic community structure was determined by 16S rDNA‐based Q‐PCR to estimate the abundance of key methanogenic micro‐organisms. 16S rDNA of hydrogenotrophic Methanobacteriales was most abundant at OLRs of ≥3·7 g dry organic matter (DOM) l^?1 day^?1. By contrast, that of aceticlastic Methanosaetaceae predominated at lower OLRs but disappeared at OLRs of ≥4·1 g DOM l^?1 day^?1. At the same OLR, the propionate concentration increased dramatically indicating the acidification of the digester. Application of internal standards to examine Q‐PCR’s accuracy revealed that the detected amount of 16S rDNA may vary within one log cycle. Conclusions: These results suggest that the absence of Methanosaetaceae might be taken as biological indicator for process’ instability. Inhibitory effects on Q‐PCR analyses could not be determined based on the spiking experiments. Significance and Impact of the Study: In this study, reactors’ microbiology was observed over time using Q‐PCR. Insights into the abundance of different methanogens might be used to improve the performance of biogas reactors.     

Comparative life cycle assessment of autotrophic cultivation of Scenedesmus dimorphus in raceway pond coupled to biodiesel and biogas production

Life cycle assessment (LCA) of indigenous freshwater microalgae, Scenedesmus dimorphus, cultivation in open raceway pond and its conversion to biodiesel and biogas were carried out. The LCA inventory inputs for the biogas scenario was entirely based on primary data obtained from algal cultivation (in pilot scale raceway pond), harvesting, and biogas production; while only the downstream processing involved in biodiesel production namely drying, reaction and purification were based on secondary data. Overall, eight scenarios were modeled for the integrated process involving: algae-based CO₂ capture and downstream processing scenarios for biodiesel and biogas along with impact assessment of nutrient addition and extent of recycling in a life cycle perspective. The LCA results indicated a huge energy deficit and net CO₂ negative in terms of CO₂ capture for both the biodiesel and biogas scenarios, majorly due to lower algal biomass productivity and higher energy requirements for culture mixing. The sensitivity analysis indicated that variability in the biomass productivity has predominant effect on the primary energy demand and global warming potential (GWP, kg CO₂ eq.) followed by specific energy consumption for mixing algal culture. Furthermore, the LCA results indicated that biogas conversion route from microalgae was more energy efficient and sustainable than the biodiesel route. The overall findings of the study suggested that microalgae-mediated CO₂ capture and conversion to biodiesel and biogas production can be energy efficient at higher biomass productivity (> 10 g m⁻² day⁻¹) and via employing energy-efficient systems for culture mixing (< 2 W m⁻³).

     

Pentachlorophenol (PCP) dechlorination in horizontal-flow anaerobic immobilized biomass (HAIB) reactors

This study verifies the potential applicability of horizontal-flow anaerobic immobilized biomass (HAIB) reactors to pentachlorophenol (PCP) dechlorination. Two bench-scale HAIB reactors (R1 and R2) were filled with cubic polyurethane foam matrices containing immobilized anaerobic sludge. The reactors were then continuously fed with synthetic wastewater consisting of PCP, glucose, acetic acid, and formic acid as co-substrates for PCP anaerobic degradation. Before being immobilized in polyurethane foam matrices, the biomass was exposed to wastewater containing PCP in reactors fed at a semi-continuous rate of 2.0 μg PCP g⁻¹ VS. The applied PCP loading rate was increased from 0.05 to 2.59 mg PCP l⁻¹ day⁻¹ for R1, and from 0.06 to 4.15 mg PCP l⁻¹ day⁻¹ for R2. The organic loading rates (OLR) were 1.1 and 1.7 kg COD m⁻³ day⁻¹ at hydraulic retention times (HRT) of 24 h for R1 and 18 h for R2. Under such conditions, chemical oxygen demand (COD) removal efficiencies of up to 98% were achieved in the HAIB reactors. Both reactors exhibited the ability to remove 97% of the loaded PCP. Dichlorophenol (DCP) was the primary chlorophenol detected in the effluent. The adsorption of PCP and metabolites formed during PCP degradation in the packed bed was negligible for PCP removal efficiency.     

Continuous acetonitrile degradation in a packed-bed bioreactor

A 20-l packed-bed reactor filled with foamed glass beads was tested for the treatment of acetonitrile HPLC wastes. Aeration was provided by recirculating a portion of the reactor liquid phase through an aeration tank, where the dissolved oxygen concentration was kept at 6 mg/l. At a feeding rate of 0.77 g acetonitrile l^–1 reactor day^–1, 99% of the acetonitrile was removed; and 86% of the nitrogen present in acetonitrile was released as NH₃, confirming that acetonitrile volatilization was not significant. Increasing the acetonitrile loading resulted in lower removal efficiencies, but a maximum removal capacity of 1.0 g acetonitrile l^–1 reactor day^–1 was achieved at a feeding rate of 1.6 g acetonitrile l^–1 reactor day^–1. The removal capacity of the system was well correlated with the oxygenation capacity, showing that acetonitrile removal was likely to be limited by oxygen supply. Microbial characterization of the biofilm resulted in the isolation of a Comamonas sp. able to mineralize acetonitrile as sole carbon, nitrogen and energy source. This organism was closely related to C. testosteroni (91.2%) and might represent a new species in the Comamonas genus. This study confirms the potential of packed-bed reactors for the treatment of a concentrated mixture of volatile pollutants.     

Microbial communities involved in biogas production from wheat straw as the sole substrate within a two-phase solid-state anaerobic digestion

Microbial communities involved in biogas production from wheat straw as the sole substrate were investigated. Anaerobic digestion was carried out within an up-flow anaerobic solid-state (UASS) reactor connected to an anaerobic filter (AF) by liquor recirculation. Two lab-scale reactor systems were operated simultaneously at 37 °C and 55 °C. The UASS reactors were fed at a fixed organic loading rate of 2.5 g L⁻¹ d⁻¹, based on volatile solids. Molecular genetic analyses of the bacterial and archaeal communities within the UASS reactors (digestate and effluent liquor) and the AFs (biofilm carrier and effluent liquor) were conducted under steady-state conditions. The thermophilic UASS reactor had a considerably higher biogas and methane yield in comparison to the mesophilic UASS, while the mesophilic AF was slightly more productive than the thermophilic AF. When the thermophilic and mesophilic community structures were compared, the thermophilic system was characterized by a higher Firmicutes to Bacteroidetes ratio, as revealed by 16S rRNA gene (rrs) sequence analysis. The composition of the archaeal communities was phase-separated under thermophilic conditions, but rather stage-specific under mesophilic conditions. Family- and order-specific real-time PCR of methanogenic Archaea supported the taxonomic distribution obtained by rrs sequence analysis. The higher anaerobic digestion efficiency of the thermophilic compared to the mesophilic UASS reactor was accompanied by a high abundance of Firmicutes and Methanosarcina sp. in the thermophilic UASS biofilm.     

Change in ammonia-oxidizing microorganisms in enriched nitrifying activated sludge

In this study, sludge was taken from a municipal wastewater treatment plant that contained a nearly equal number of archaeal amoA genes (5.70 × 10⁶ ± 3.30 × 10⁵ copies mg sludge⁻¹) to bacterial amoA genes (8.60 × 10⁶ ± 7.64 × 10⁵ copies mg sludge⁻¹) and enriched in three continuous-flow reactors receiving an inorganic medium containing different ammonium concentrations: 2, 10, and 30 mM NH₄⁺–N (28, 140, and 420 mg N l⁻¹). The abundance and communities of ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) in enriched nitrifying activated sludge (NAS) were monitored at days 60 and 360 of the operation. Early on, between day 0 and day 60 of reactor operation, comparative abundance of AOA amoA genes to AOB amoA genes varied among the reactors depending on the ammonium levels found in the reactors. As compared to the seed sludge, the number of AOA amoA genes was unchanged in the reactor with lower ammonium level (0.06 ± 0.04 mgN l⁻¹), while in the reactors with higher ammonium levels (0.51 ± 0.33 and 0.25 ± 0.10 mgN l⁻¹), the numbers of AOA amoA genes were deteriorated. By day 360, AOA disappeared from the ammonia-oxidizing consortiums in all reactors. The majority of the AOA sequences from all NASs at each sampling period fell into a single AOA cluster, however, suggesting that the ammonium did not affect the AOA communities under this operational condition. This result is contradictory to the case of AOB, where the communities varied significantly among the NASs. AOB with a high affinity for ammonia were present in the reactors with lower ammonium levels, whereas AOB with a low affinity to ammonia existed in the reactors with higher ammonium levels.     

Treatment of phenol in an anaerobic fluidized bed reactor (AFBR): continuous and batch regime

Results of this study describe the feasibility of anaerobic treatment of highly concentrated phenol synthetic wastewater using an anaerobic fluidized bed reactor (AFBR) in both continuous and batch modes. Wastewater with a maximum load of 2,100 mg C·l⁻¹ was prepared using phenol (maximum concentration of 1,600 mg C·l⁻¹) as substrate and a mixture of acetic, propionic and butyric acids (500 mg C·l⁻¹) as co-substrate. AFBR reached total organic carbon (TOC) and phenol removal efficiency over 95% treating the highest organic loading rate (OLR) containing phenol studied for this kind of reactor (5.03 g C·l⁻¹·d⁻¹). The phenol loading rate rise caused volumetric biogas rate increase up to 4.4 l·l⁻¹·d⁻¹ (average yield of 0.28 l CH₄·g⁻¹ COD_removed) as well as variation in the biogas composition; the CO₂ percentage increased while the CH₄ percentage decreased. Morphological examination of the bioparticles at 4.10 g C·l⁻¹·d⁻¹, revealed significant differences in the biofilm structure, microbial colonization and bacterial morphological type development. The five batch assays showed that phenol degradation may be favoured by the presence of volatile fatty acids (VFAs) (co-metabolism), whereas VFAs degradation may be inhibited by phenol. AFBR reached initial phenol degradation velocity of 0.25 mg C·l⁻¹·min⁻¹.     

Microbial protein synthesis in growing-finishing bulls estimated from the urinary excretion of purine derivatives

In the frame of a feeding experiment with three periods, balance trials were carried out with 18 double-muscled Belgian White–blue bulls, allocated to one of four feeding regimes. The ration consisted of maize silage and concentrate in the ratio of 35:65 on DM basis. Six concentrates were formulated to supply three levels of protein and energy. The three periods corresponded to distinct live weight intervals of 360–460, 460–570 and 570–680 kg. In the first feeding regime, low protein and intermediate energy level were given during the whole trial; in the second regime, protein level decreased at a constant intermediate energy level; in the third regime, the energy level increased at a constant high protein level; in the fourth regime, protein level decreased simultaneously with an increase in the energy level. Total daily intake varied from 6.2 to 9.7 kg for dry matter (DM), from 65 to 106 MJ for metabolisable energy (ME) and from 719 to 1326 g for crude protein (CP) (50 animal observations). At the end of each period, the excretion of the purine derivatives (PD), allantoin and uric acid, was measured after total urine collection during 4 days to estimate microbial nitrogen supply to the duodenum (MN_PD). The effect of the intake of DM, organic matter (OM), digestible OM (DOM), digestible carbohydrates (DCHO), total digestible nutrients (TDN), rumen fermentable OM (FOM), metabolisable energy (ME), fermentable ME (FME), CP, digestible CP (DCP) and rumen degradable protein (RDP) on PD and MN_PD was examined. Further, the relationship of MN_PD to MN, calculated according to different systems, was examined. The amount (mean±SD) of allantoin excreted in urine was 147±23 mmol day⁻¹ and of uric acid 11±3 mmol day⁻¹. The MN_PD amounted to 97±21 g day⁻¹, varying from 57 to 154 g day⁻¹, and significantly increased with all measures of nutrient intake. The correlation coefficients, ranging from 0.45 for DCP to 0.57 for DOM and FME, were, however, not significantly different. MN_PD showed a larger variation and was on average lower than the potential MN values calculated from the intake of FOM (108±13 g day⁻¹), DCHO (141±16 g day⁻¹) and FME (109±13 g day⁻¹), similar to that calculated from the intake of RDP (99±14 g day⁻¹) and higher than the MN value calculated from the intake of TDN (84±11 g day⁻¹). The correlations of MN_PD to the calculated MN values ranged from 0.47 for MN_FOM to 0.59 for MN_FME, but were not significantly different.     

Enhancement of polysaccharide production in suspension cultures of protocorm-like bodies from Dendrobium huoshanense by optimization of medium compositions and feeding of sucrose

A strategy that optimization of medium compositions for maximum biomass followed by feeding of sucrose for maximum polysaccharide synthesis was developed for enhancing polysaccharide production in suspension culture of protocorm-like bodies (PLBs) of Dendrobium huoshanense C.Z. Tang et S.J. Cheng. In growth stage, the original half-strength MS medium was optimized with carbon sources, nitrogen sources and metal ion combinations. The effects of different carbon sources on PLBs growth were remarkable and sucrose at 35 g l⁻¹ was the most suitable. Sole nitrate nitrogen of 30 mmol l⁻¹ was the best for PLBs growth. Metal ions (Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺) showed different influences on PLBs growth. The optimal concentration of Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺ was 4.5 mmol l⁻¹, 0.1 mmol l⁻¹, 0.5 mmol l⁻¹ and 0.06 mmol l⁻¹, respectively. In the optimized medium (sucrose, nitrate, Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺ concentration as described above, the other component concentration seen in half-strength MS), 33.9 g DW l⁻¹ PLBs were harvested after 30 days of culture and biomass increase was improved 245% as compared with that in the original medium. In production stage, polysaccharide synthesis was significantly improved by the feeding sucrose. The maximum polysaccharide production (22 g l⁻¹) was obtained in the case of 50 g l⁻¹ sucrose feeding at day 30 of culture, which was about 109-fold higher than that in the original medium without feeding of sucrose.