P1 plasmid replication. Role of initiator titration in copy number control

The copy number control locus incA of unit copy plasmid P1 maps in a region containing nine 19 base-pair repeats. Previous results from studies in vivo and in vitro indicated that incA interacts with the plasmid-encoded RepA protein, which is essential for replication. It has been proposed that the repeat sequences negatively control copy number by sequestering the RepA protein, which is rate-limiting for replication. Our results lend further support to this hypothesis. Here we show that the repeats can be deleted completely from P1 miniplasmids and the deletion results in an approximately eightfold increase in plasmid copy number. So, incA sequences are totally dispensable for replication and have only a regulatory role. The copy number of incA-deleted plasmids can be reduced if incA sequences are present in trans or are reincorporated at two different positions in the plasmid. This reduction in copy number is not due to lowered expression of the repA gene in the presence of incA. We show that one repeat sequence is sufficient to bind RepA and can reduce the copy number of incA-deleted plasmids. When part of the repeat was deleted, it lost its ability to bind as well as influence copy number. These results show a strong correlation between the capacity of incA repeats to bind RepA protein both in vivo and in vitro, and the function of incA in the control of copy number.     

Replication and incompatibility properties of plasmid pE194 in Bacillus subtilis.

pE194, a 3.5-kilobase multicopy plasmid, confers resistance to the macrolide-lincosamide-streptogramin B antibiotics in Bacillus subtilis. By molecular cloning and deletion analysis we have identified a replication segment on the physical map of this plasmid, which consists of about 900 to 1,000 base pairs. This segment contains the replication origin. It also specifies a trans-acting function (rep) required for the stable replication of pE194 and a negatively acting copy control function which is the product of the cop gene. The target sites for the rep and cop gene products are also within this region. Two incompatibility determinants have been mapped on the pE194 genome and their properties are described. One (incA) resides within the replication region and may be identical to cop. incB, not located in the replication region, expresses incompatibility toward a copy control mutant (cop-6) but not toward the wild-type replicon.     

The minimal replicon of a Streptomycete plasmid produces an ultrahigh level of plasmid DNA

A functional map of Streptomyces coelicolor plasmid SCP2* was deduced from derivatives constructed by in vitro deletions. Functions were analyzed on bifunctional shuttle plasmids that contained pBR322 for selection and replication in Escherichia coli and fragments of SCP2* for replication in Streptomyces griseofuscus C581 and strains of Streptomyces lividans. The aph gene for neomycin resistance from Streptomyces fradiae and the tsr gene for thiostrepton resistance from Streptomyces azureus were incorporated as selectable antibiotic resistance markers in streptomycetes. An 11.8-kb sequence bounded by EcoRI and KpnI restriction sites contains the information for self-transfer and normal replication of the plasmid. A 5.9-kb EcoRI-SalI fragment contains all of the information for normal replication. Partial digestion generated a 2.2-kb Sau3A fragment that is sufficient for replication but it produces ten times higher plasmid copy number than the basic replicon. pHJL400 and PHJL401 are useful shuttle vectors containing the moderate-copy-number streptomycete plasmid combined with the E. coli plasmid pUC19. A 1.4-kb BclI-Sau3A fragment with an additional internal BclI site contains the minimal replicon but it produces 1000 times higher plasmid copy number than the basic replicon. pHJL302 is a useful shuttle vector containing the ultrahigh-copy-number streptomycete plasmid combined with the E. coli plasmid pUC19.     

Hexamerization of RepA from the Escherichia coli plasmid pKL1

The Escherichia coli plasmid pKL1 is one of the smallest bacterial plasmids. It encodes a single, autoregulating structural gene, repA, responsible for replication and copy number control. The oligomerization of RepA was previously proposed as the basis of a strategy for pKL1 copy number control. To elucidate the oligomerization properties of RepA in solution, RepA was expressed in E. coli; purified by ion exchange and hydrophobic chromatography; and examined in solution by spectrapolarimetry, light scattering, sedimentation velocity, and equilibrium ultracentrifugation. RepA behaved as a concentration-dependent equilibrium of dimers and hexamers. Conformational parameters of the RepA hexameric complex were determined. These results support the proposed autogenous regulatory model whereby RepA hexamers negatively regulate repA expression thereby affecting the copy number control of pKL1. RepA of pKL1 is the first plasmid replication initiation protein documented to be in dimeric-hexameric forms.     

The incompatibility product of IncFII R plasmid NR1 controls gene expression in the plasmid replication region.

The incompatibility properties of IncFII R plasmid NR1 were compared with those of two of its copy number mutants, pRR12 and pRR21. pRR12 produced an altered incompatibility product and also had an altered incompatibility target site. The target site appeared to be located within the incompatibility gene, which is located more than 1,200 base pairs from the plasmid origin of replication. The incompatibility properties of pRR21 were indistinguishable from those of NR1. Lambda phages have been constructed which contain the incompatibility region of NR1 or of one of its copy mutants fused to the lacZ gene. In lysogens constructed with these phages, beta-galactosidase was produced under the control of a promoter located within the plasmid incompatibility region. Lysogens containing prophages with the incompatibility regions from pRR12 and pRR21 produced higher levels of beta-galactosidase than did lysogens containing prophages with the incompatibility region from the wild-type NR1. The introduction into these inc-lac lysogens of pBR322 plasmids carrying the incompatibility regions of the wild-type or mutant plasmids resulted in decreased levels of beta-galactosidase production. For a given lysogen, the decrease was greater when the pBR322 derivative expressed a stronger incompatibility toward the plasmid from which the fragment in the prophage was derived. This suggested that the incompatibility product acts on its target to repress gene expression in the plasmid replication region.     

Plasmid replication functions: two distinct segments of plasmid R1, RepA and RepD, express incompatibility and are capable of autonomous replication.

The genetic determinants for replication and incompatibility of plasmid R1 were investigated by gene cloning methods, and three types of R1 miniplasmid derivatives were generated. The first, exemplified by plasmid pKT300, consisted of a single BglII endonuclease-generated deoxyribonucleic acid fragment derived from the R1 region that is located between the determinants for conjugal transfer and antibiotic resistance. Two types of miniplasmids could be formed from PstI endonuclease-generated fragments of pKT300. One of these, which is equivalent to miniplasmids previously generated from plasmids R1-19 and R1-19B2, consisted of two adjacent PstI fragments that encode the RepA replication system of plasmid R1. The other type contained a segment of R1, designated the RepD replication region, that is adjacent to the RepA region and that has not been identified previously as having the capacity for autonomous replication. Plasmid R1, therefore, contained two distinct deoxyribonucleic acid segments capable of autonomous replication. The RepA-RepD miniplasmid pKT300 had a copy number about eightfold higher than that of R1 and hence lacked a determinant for the regulation of plasmid copy number. Like R1, it was maintained stably in dividing bacteria. RepA miniplasmids had copy numbers which were two- to fourfold higher than that of R1 (i.e., which were lower than that of pKT300) and were maintained slightly less stably than those of pKT300 and R1. The RepD miniplasmid was not maintained stably in dividing bacteria. Previous experiments have shown that incompatibility of IncFII group plasmids is specified by a plasmid copy control gene. Despite the fact that RepA miniplasmids of R1 were defective in copy control, they nevertheless expressed incompatibility. This suggests that two genes are responsible for plasmid copy control, one that specifies incompatibility and is located on RepA miniplasmids and another that is located outside of, but adjacent to, the RepA replication region. Hybrid plasmids composed of pBR322 and one PstI fragment from the RepA region, P-8, exhibited incompatibility towards R2 and RepA miniplasmids but not the RepD miniplasmid, whereas hybrids composed of pBR322 and the PstI fragment of the RepD region, P-3, exhibited incompatibility towards R1 and the RepD miniplasmid but not RepA miniplasmids. These results indicate that the two replication systems are functionally distinct and that, although the RepA system is the principal replication system of R1, the RepD system also plays a role in the maintenance of this plasmid.     

A mathematical model for lambda dv plasmid replication: analysis of copy number mutants

A mathematical model based on the molecular control mechanisms for lambda dv plasmid replication in a single Escherichia coli cell has been applied to simulate replication of mutant lambda dv plasmids. Model simulations of changes in repressor level and copy number resulting from mutations in the promoter-operator PROR region are consistent with experimental data. Calculated effects on lambda dv plasmid copy number of oligomer formation and of alternations in termination efficiency at tR1 also agree with experiment. The model has been employed to simulate the influence of cro mutants and of cro and tR1 double mutants on copy number and stable maintenance of lambda dv plasmid copy number. The genetic structure included in formulation of the replicon model provides a framework for relating changes in specific genetic loci on the plasmid with resulting alterations in host-plasmid system function.     

Mutations in the trfA replication gene of the broad-host-range plasmid RK2 result in elevated plasmid copy numbers.

Mutated forms of trfA, the replication protein gene of plasmid RK2, that support a minimal RK2 origin plasmid in Escherichia coli at copy numbers up to 23-fold higher than normal have been isolated. Six such high-copy-number (copy-up) mutations were mapped and sequenced. In each case, a single base transition led to an amino acid substitution in the TrfA protein primary sequence. The six mutations affected different residues of the protein and were located within a 69-base-pair region encoding 24 amino acids. Dominance tests showed that each of the mutants can be suppressed by wild-type trfA in trans, but suppression is highly dependent on the amount of wild-type protein produced. Excess mutant TrfA protein provided in trans significantly increased the copy number of RK2 and other self-replicating derivatives of RK2 that contain a wild-type trfA gene. These observations suggest that the mutations affect a regulatory activity of the TrfA replication protein that is a key factor in the control of initiation of RK2 replication.