Pullulanase secretion in Escherichia coli K-12 requires a cytoplasmic protein and a putative polytopic cytoplasmic membrane protein

The previously uncharacterized third and fourth genes (pulE and pulF) of the pullulanase secretion gene operon of Klebsiella oxytoca strain UNF5023 are, respectively, predicted to encode a 55 kDa polypeptide with a putative nucleotide-binding site, and a highly hydrophobic 44 kDa polypeptide that probably spans the cytoplasmic membrane several times. Expression of pulE in minicells or under the control of a strong bacteriophage T7 promoter resulted in the production of a c. 58 kDa cytoplasmic protein. A representative PulE-beta-galactosidase hybrid protein created by Tnlac mutagenesis was also found mainly in the cytoplasm. These results are in line with the predicted absence from PulE of a region of sufficient hydrophobicity to function as a signal sequence. The PulF polypeptide could not be detected either in minicells or when the gene was transcribed from the T7 promoter, but the acquirement of three pulF-lacZ gene fusions that encoded hybrid proteins with relatively high levels of beta-galactosidase activity indicates that this gene can be transcribed and translated. Gene disruption experiments indicated that both pulE and pulF are required for pullulanase secretion in Escherichia coli K-12. Both proteins exhibit considerable homology throughout their entire lengths with other proteins involved in protein secretion, pilin assembly, conjugation and transformation competence in a variety of bacteria. In addition, PulE protein has consensus sequences found in a wide variety of nucleotide-binding proteins. This study completes the initial characterization of the pullulanase secretion gene operon, which comprises 13 genes that are all essential for the transport of pullulanase across the outer membrane.     

Export and secretion of the lipoprotein pullulanase by Klebsiella pneumoniae

Pullulanase, a secreted lipoprotein of Klebsiella pneumoniae, is initially localized to the outer face of the outer membrane, as shown by protease and substrate accessibility and by immunofluorescence tests. Freeze-thaw disruption of these cells released both membrane-associated and apparently soluble forms of pullulanase. Membrane-associated pullulanase co-fractionated with authentic outer membrane vesicles upon isopycnic sucrose-gradient centrifugation, whereas the quasi-soluble form had the same equilibrium density as inner membrane vesicles and extracellular pullulanase aggregates. The latter also contained outer membrane maltoporin, but were largely devoid of other membrane components including LPS and lipids. K. pneumoniae carrying multiple copies of the pullulanase structural gene (pulA) produced increased amounts of cell-associated and secreted pullulanase, but a large proportion of the enzyme was neither exposed on the cell surface nor released into the medium, even after prolonged incubation. This suggests that factors necessary for pullulanase secretion were saturated by the over-produced pullulanase. When pulA was expressed under lacZ promotor control, the pullulanase which was produced was not exposed on the cell surface at any time, suggesting that pullulanase secretion genes are not expressed constitutively, and raising the possibility that they, like pulA, may be part of the maltose regulon.     

Klebsiella pneumoniae pulS gene encodes an outer membrane lipoprotein required for pullulanase secretion.

The product of the Klebsiella pneumoniae gene pulS, which is located downstream from the pullulanase structural gene (pulA), is essential for the cell surface localization and extracellular release of pullulanase in Escherichia coli K-12. pulS is transcribed in the opposite direction to pulA, from which it is separated by a region of 624 nucleotides. Although this latter region contains a new component of the maltose regulon, pulB, which is transcribed from the pulA promoter, it is not required for pullulanase synthesis or secretion. Unlike pulA and all other pullulanase secretion genes characterized so far, the expression of pulS is not induced by growth in the presence of maltose and is unaffected by mutations in the maltose regulator gene malT. The pulS gene product was identified as a ca. 12-kilodalton outer membrane lipoprotein. The characterization of PulS brings to three the number of identified proteins which are known to be required for pullulanase secretion in addition to the components of the signal sequence-dependent general protein export pathway.     

Five additional genes in the pulC-O operon of the gram-negative bacterium Klebsiella oxytoca UNF5023 which are required for pullulanase secretion

Summary DNA sequence analysis, Tnpho and Tntac-1, mutagenesis, deletion analysis, expression under bacteriophage T7 gene 10 promoter control, subcellular fractionation and complementation tests were used to study the function of DNA located in the centre of thepulC-O operon fromKlebsiella oxytoca strain UNF5023. The characterized region of the operon includes five genes (pulG,pulH,pulI,pulJ andpulK) coding for apparently integral inner membrane proteins which are required for pullulanase secretion. The results presented here and previously show that thepulC-O operon contains at least 11 pullulanase secretion genes.     

Collagen-like sequences stabilize homotrimers of a bacterial hydrolase.

Pullulanase from Klebsiella pneumoniae strain FG9 has an unusual N-terminal amino acid sequence that includes six repeats of the tripeptide Gly-X-Pro. This type of sequence is characteristic of animal collagens and collagen-like proteins which form triple helical structures. We have investigated the molecular organization of this bacterial pullulanase isolated from the cell surface of Escherichia coli cells that carry the cloned FG9 pulA (pullulanase encoding) gene. Non-denaturing polyacrylamide gel analysis shows that pullulanase exists as higher order, apparently homogeneous, structures. We have used highly purified bacterial collagenase to probe the role of the collagen-like region and we demonstrate that this feature is essential for non-covalent association of pullulanase homotrimers. In addition we show collagenase-specific release of cell-bound pullulanase.     

Five genes at the 3' end of the Klebsiella pneumoniae pulC operon are required for pullulanase secretion

The nucleotide sequence of a 5082bp fragment of chromosomal DNA from Klebsiella pneumoniae strain UNF5023 is reported. The sequence includes the last four genes of an operon of genes specifically required for the secretion of the enzyme pullulanase. All four genes (puIL, puIM, puIN and puIO) are shown to be required for pullulanase secretion, as is a fifth gene (puIK) which extends beyond the 5′ end of the sequenced DNA. The products of the puIL, puIM, puIN and puIO genes (44kD, 18kD, 27kD and 24kD, respectively) are all predicted to have one or more hydrophobic domains typical of signal sequences and/or membrane anchors, and were all found mainly associated with the inner membranes of subfractionated cells in which the corresponding genes had been expressed from the bacteriophage T7 gene 10 promoter. The results of this study increase the number of genes which have been identified as required for pullulanase secretion to eight, in addition to genes coding for components of the general export pathway.     

Characterization and expression of the structural gene for pullulanase, a maltose-inducible secreted protein of Klebsiella pneumoniae.

Some strains of Klebsiella pneumonia secrete pullulanase, a debranching enzyme which produces linear molecules (maltodextrins, amylose) from amylopectin and glycogen. pulA, the structural gene for pullulanase, was introduced into Escherichia coli, either on a multiple-copy-number plasmid or as a single copy in the chromosome. When in E. coli, pulA was controlled by malT, the positive regulatory gene of the maltose regulon. Indeed, pulA expression was undetectable in a malT-negative mutant and constitutive in a malTc strain. Furthermore, the plasmid carrying pulA titrated the MalT protein. When produced in E. coli, pullulanase was not localized in the same way as in K. pneumoniae. In the latter case it was first exported to the outer membrane, with which it remained loosely associated, and was then released into the growth medium. In E. coli the enzyme was distributed both in the inner and the outer membranes and was never released into the growth medium.     

Cloning and expression in Escherichia coli of the Klebsiella pneumoniae genes for production, surface localization and secretion of the lipoprotein pullulanase.

This article describes the reconstitution in Escherichia coli of a heterologous protein secretion system comprising a gene for an extracellular protein together with its cognate secretion genes. The protein concerned, pullulanase, is a secreted lipoprotein of the Gram-negative bacterium Klebsiella pneumoniae. It is initially localized to the cell surface before being specifically released into the medium. E. coli carrying the cloned pullulanase structural gene (pulA) produces pullulanase but does not expose or secrete it. Secretion genes were cloned together with pulA in an 18.8 kbp fragment of K. pneumoniae chromosomal DNA. E. coli carrying this fragment exhibited maltose-inducible production, exposition and specific secretion of pullulanase. Transposon mutagenesis showed that the secretion genes are located on both sides of pulA. Secretion genes located 5' to pulA were transcribed in the opposite orientation to pulA under the control of the previously identified, malT-regulated malX promoter. Thus these secretion genes are part of the maltose regulon and are therefore co-expressed with pulA. Transposon mutagenesis suggested that secretion genes located 3' of pulA are not co-transcribed with pulA, raising the possibility that some secretion functions are not maltose regulated.     

Analysis of the subcellular location of pullulanase produced by Escherichia coli carrying the pulA gene from Klebsiella pneumoniae strain UNF5023

Three different techniques, protease accessibility, cell fractionation and in situ immunocytochemistry, were used to study the location of the lipoprotein pullulanase produced by Escherichia coli K12 carrying the cloned pullulanase structural gene (pulA) from Klebsiella pneumoniae, with or without the K. pneumoniae genes required to transport pullulanase to the cell surface (secretion-competent and secretion-incompetent, respectively). Pullulanase produced by secretion-competent strains could be slowly but quantitatively released into the medium by growing the cells in medium containing pronase. The released pullulanase lacked the N-terminal fatty-acylated cysteine residue (and probably also a short N-terminal segment of the pullulanase polypeptide), confirming that the N-terminus is the sole membrane anchor in the protein. Pullulanase produced by secretion-incompetent strains was not affected by proteases, confirming that it is not exposed on the cell surface. Pullulanase cofractionated with both outer and inner membrane vesicles upon isopycnic sucrose gradient centrifugation, irrespective of the secretion competence of the strain. Examination by electronmicroscopy of vesicles labelled with antipullulanase serum and protein A-gold confirmed that pullulanase was associated with both types of vesicles. When thin-sectioned cells were examined by the same technique, pullulanase was found to be located mainly on the cell surface of the secretion-competent cells and mainly in the proximity of the inner membrane in the secretion-incompetent cells. Thus, while the results from three independent techniques (substrate accessibility, protease accessibility and in situ immunocytochemistry) show that pullulanase is transported to the cell surface of secretion-competent cells, this could not be confirmed by cell-fractionation techniques. Possible explanations for this discrepancy are discussed.     

Extracellular secretion of pullulanase is unaffected by minor sequence changes but is usually prevented by adding reporter proteins to its N- or C-terminal end.

Linker insertions in the pullulanase structural gene (pulA) were examined for their effects on pullulanase activity and cell surface localization in Escherichia coli carrying the cognate secretion genes from Klebsiella oxytoca. Of the 23 insertions, 11 abolished pullulanase activity but none were found to prevent secretion. To see whether more drastic changes affected secretion, we fused up to five reporter proteins (E. coli periplasmic alkaline phosphatase, E. coli periplasmic maltose-binding protein, periplasmic TEM beta-lactamase, Erwinia chrysanthemi extracellular endoglucanase Z, and Bacillus subtilis extracellular levansucrase) to three different positions in the pullulanase polypeptide: close to the N terminus of the mature protein, at the C terminus of the protein, or at the C terminus of a truncated pullulanase variant lacking the last 256 amino acids. Only 3 of the 13 different hybrids were efficiently secreted: 2 in which beta-lactamase was fused to the C terminus of full-length or truncated pullulanase and 1 in which maltose-binding protein was fused close to the N terminus of pullulanase. Affinity-purified endoglucanase-pullulanase and pullulanase-endoglucanase hybrids exhibited apparently normal levels of pullulanase activity, indicating that the conformation of the pullulanase segment of the hybrid had not been dramatically altered by the presence of the reporter. However, pullulanase-endoglucanase hybrids were secreted efficiently if the endoglucanase component comprised only the 60-amino-acid, C-terminal cellulose-binding domain, suggesting that at least one factor limiting hybrid protein secretion might be the size of the reporter.     

A gene fusion approach to the study of pullulanase export and secretion in Eschenchia coli

A series of fusions between the gene for the Klebsiella pneumoniae secreted lipoprotein pullulanase (pulA) and the genes for cytoplasmic beta-galactosidase (lacZ) or periplasmic alkaline phosphatase (phoA) were created by transposon mutagenesis using mini-MudII1681 or TnphoA, respectively. The hybrid genes were expressed in Escherichia coli K-12 with or without the K. pneumoniae genes that promote pullulanase secretion in E. coli. We characterized seven different pulA-lacZ gene fusions encoding hybrid polypeptides containing from 14 to c. 1060 residues of pro-pullulanase. All but the smallest hybrid were fatty acylated and were toxic to producing cells, causing the accumulation of precursors of other exported proteins. Four different pulA-phoA gene fusions encoded hybrids with alkaline phosphatase activity. All four hybrids were fatty acylated, but were not toxic. Although the hybrids were apparently membrane-associated, they were not secreted into the medium either by E. coli carrying pullulanase secretion genes or by K. pneumoniae. Immunofluorescence tests indicated that the pullulanase secretion genes promoted the localization of one of these hybrids to the outer face of the E. coli outer membrane, which may have important implications for the design of live vaccine strains and of immobilized enzymes.     

Molecular cloning and purification of klebicin B

A novel klebicin, klebicin B, produced by an isolate of Klebsiella pneumoniae has been identified. It is encoded by a 5.5 kb plasmid, pKlebB-K17/80, which is mobilized into K. pneumoniae UNF5023 by a large plasmid found in the same strain. The 5.5 kb plasmid has been cloned into the high-copy-number vector pUC19 and the restriction map of the resulting recombinant plasmid pRJ180 has been determined. Using sub-cloning and transposon mutagenesis, the klebicin B structural gene, the klebicin B immunity gene and the mitomycin C (MC) sensitivity gene (lys) present on pRJ180 have been localized. Transposon inserts which inactivated klebicin production also abolished lysis protein production encoded by pRJ180, but did not affect klebicin B immunity. Using SDS-PAGE an MC-induced polypeptide of 85 kDa was observed in cultures of K. pneumoniae UNF5023(pRJ180). This polypeptide was absent in cultures carrying plasmid pRJ180 with a Tn1000 insert which inactivated klebicin production. Analysis of the polypeptides present in the medium of Escherichia coli JM83 hsdR(pRJ180) or K. pneumoniae UNF5023(pRJ180) indicated that the 85 kDa polypeptide is specifically secreted from the producing cell. Klebicin B has been purified, using gel filtration, from a cell-free extract of K. pneumoniae UNF5023(pRJ180) which had been induced with MC. After boiling in sample buffer the purified klebicin B gave rise to two peptides on SDS-PAGE, one of 85 kDa and the other of 11 kDa. Klebicin B-resistant mutants of K. pneumoniae UNF5023 were sensitive to klebicin A, colicin B and colicin D.     

Stable periplasmic secretion intermediate in the general secretory pathway of Escherichia coli.

The secretion of the Klebsiella oxytoca cell surface lipoprotein pullulanase involves translocation across the cytoplasmic and outer membranes of the Gram-negative bacterial cell envelope. A variant of pullulanase was created by fusing the signal peptide-encoding 5' region of the Escherichia coli gene for periplasmic MalE protein to the 3' end of the pulA gene encoding almost the entire mature part of pullulanase. When produced in E. coli carrying the malE-pulA gene fusion on a high copy number plasmid and the complete set of genes specifically required for pullulanase secretion on a second plasmid, the hybrid protein differed from wild-type pullulanase as follows: (i) it was not fatty-acylated; (ii) it was apparently processed by LepB signal peptidase rather than by LspA lipoprotein signal peptidase; (iii) it was released into the periplasm and was only slowly transported across the outer membrane, and (iv) it was released directly into the medium rather than via the usual surface-anchored intermediate. The hybrid protein was secreted more rapidly when malE-pulA was expressed from a low copy number plasmid. The two steps in the secretion pathway could be totally uncoupled by expressing first the malE-pulA gene fusion and then the cognate secretion genes. These results show that fatty-acylation of wild-type PulA is not essential for secretion but may improve its efficiency when large amounts of the protein are produced, that the two steps in secretion can occur quite independently and that the periplasmic intermediate can persist for long periods under certain circumstances.     

Entire nucleotide sequence of the pullulanase gene of Klebsiella aerogenes W70.

We determined the entire nucleotide sequence of the Klebsiella aerogenes W70 pullulanase gene (pulA) contained on a 4.2-kilobase-pair fragment of plasmid pPB174. The amino acid composition deduced from an open reading frame of 3,288 base pairs agreed closely with that determined for the intracellular pullalanase. The precursor enzyme consisted of 1,096 amino acid residues and contained a hydrophobic N-terminal signal peptide and the consensus sequence for the bacterial prelipoprotein signal peptide cleavage site.     

Genetic Dissection of the Outer Membrane Secretin PulD: Are There Distinct Domains for Multimerization and Secretion Specificity?

Linker and deletion mutagenesis and gene fusions were used to probe the possible domain structure of the dodecameric outer membrane secretin PulD from the pullulanase secretion pathway of Klebsiella oxytoca. Insertions of 24 amino acids close to or within strongly predicted and highly conserved amphipathic beta strands in the C-terminal half of the polypeptide (the beta domain) abolished sodium dodecyl sulfate (SDS)-resistant multimer formation that is characteristic of this protein, whereas insertions elsewhere generally had less dramatic effects on multimer formation. However, the beta domain alone did not form SDS-resistant multimers unless part of the N-terminal region of the protein (the N domain) was produced in trans. All of the insertions except one, close to the C terminus of the protein, abolished function. The N domain alone was highly unstable and did not form SDS-resistant multimers even when the beta domain was present in trans. We conclude that the beta domain is a major determinant of multimer stability and that the N domain contributes to multimer formation. The entire or part of the N domain of PulD could be replaced by the corresponding region of the OutD secretin from the pectate lyase secretion pathway of Erwinia chrysanthemi without abolishing pullulanase secretion. This suggests that the N domain of PulD is not involved in substrate recognition, contrary to the role proposed for the N domain of OutD, which binds specifically to pectate lyase secreted by E. chrysanthemi (V. E. Shevchik, J. Robert-Badouy, and G. Condemine, EMBO J. 16:3007-3016, 1997).     

Protein secretion in Pseudomonas aeruginosa: the xcpA gene encodes an integral inner membrane protein homologous to Klebsiella pneumoniae secretion function protein PulO.

xcp mutations have pleiotropic effects on the secretion of proteins in Pseudomonas aeruginosa PAO. The nucleotide sequence of a 1.2-kb DNA fragment that complements the xcp-1 mutation has been determined. Sequence analysis shows the xcpA gene product to be a 31.8-kDa polypeptide, with a highly hydrophobic character. This is consistent with a localization in the cytoplasmic membrane in P. aeruginosa, determined after specific expression of the xcpA gene under control of the T7 phi 10 promoter. A very strong homology was found between XcpA and PulO, a membrane protein required for pullulanase secretion in Klebsiella pneumoniae. This suggests the existence of a signal sequence-dependent secretion process common to these two unrelated gram-negative bacteria.     

Pullulanase type I from Fervidobacterium pennavorans Ven5: cloning, sequencing, and expression of the gene and biochemical characterization of the recombinant enzyme

The gene encoding the type I pullulanase from the extremely thermophilic anaerobic bacterium Fervidobacterium pennavorans Ven5 was cloned and sequenced in Escherichia coli. The pulA gene from F. pennavorans Ven5 had 50.1% pairwise amino acid identity with pulA from the anaerobic hyperthermophile Thermotoga maritima and contained the four regions conserved among all amylolytic enzymes. The pullulanase gene (pulA) encodes a protein of 849 amino acids with a 28-residue signal peptide. The pulA gene was subcloned without its signal sequence and overexpressed in E. coli under the control of the trc promoter. This clone, E. coli FD748, produced two proteins (93 and 83 kDa) with pullulanase activity. A second start site, identified 118 amino acids downstream from the ATG start site, with a Shine-Dalgarno-like sequence (GGAGG) and TTG translation initiation codon was mutated to produce only the 93-kDa protein. The recombinant purified pullulanases (rPulAs) were optimally active at pH 6 and 80 degrees C and had a half-life of 2 h at 80 degrees C. The rPulAs hydrolyzed alpha-1,6 glycosidic linkages of pullulan, starch, amylopectin, glycogen, alpha-beta-limited dextrin. Interestingly, amylose, which contains only alpha-1,4 glycosidic linkages, was not hydrolyzed by rPulAs. According to these results, the enzyme is classified as a debranching enzyme, pullulanase type I. The extraordinary high substrate specificity of rPulA together with its thermal stability makes this enzyme a good candidate for biotechnological applications in the starch-processing industry.     

Cloning of the pullulanase gene and overproduction of pullulanase in Escherichia coli and Klebsiella aerogenes.

The pullulanase gene (pul) of Klebsiella aerogenes was cloned into a pBR322 vector in Escherichia coli. Deletion analysis of the recombinant plasmid showed that the pul coding sequence, probably with the regulator gene, was located entirely within a 4.2-kilobase segment derived from the chromosomal DNA of K. aerogenes. E. coli cells carrying the recombinant plasmids produced about three- to sevenfold more pullulanase than did the wild-type strain of K. aerogenes W70. When the cloned cells of E. coli were grown with pullulan or maltose, most pullulanase was produced intracellularly, whereas K. aerogenes produced pullulanase extracellularly. Transfer of the plasmid containing the pul gene into K. aerogenes W70 resulted in about a 20- to 40-fold increase in total production of pullulanase, and the intracellular enzyme level was about 100- to 150-fold higher than that of the parent strain W70. The high level of pullulanase activity in K. aerogenes cells carrying the recombinant plasmid was maintained for at least 2 weeks.     

Cloning of the pullulanase gene and overproduction of pullulanase in Escherichia coli and Klebsiella aerogenes

The pullulanase gene (pul) of Klebsiella aerogenes was cloned into a pBR322 vector in Escherichia coli. Deletion analysis of the recombinant plasmid showed that the pul coding sequence, probably with the regulator gene, was located entirely within a 4.2-kilobase segment derived from the chromosomal DNA of K. aerogenes. E. coli cells carrying the recombinant plasmids produced about three- to sevenfold more pullulanase than did the wild-type strain of K. aerogenes W70. When the cloned cells of E. coli were grown with pullulan or maltose, most pullulanase was produced intracellularly, whereas K. aerogenes produced pullulanase extracellularly. Transfer of the plasmid containing the pul gene into K. aerogenes W70 resulted in about a 20- to 40-fold increase in total production of pullulanase, and the intracellular enzyme level was about 100- to 150-fold higher than that of the parent strain W70. The high level of pullulanase activity in K. aerogenes cells carrying the recombinant plasmid was maintained for at least 2 weeks.