Modulation of C-type inactivation by K+ at the potassium channel selectivity filter.

With prolonged or repetitive activation, voltage-gated K+ channels undergo a slow (C-type) inactivation mechanism, which decreases current flow through the channel. Previous observations suggest that C-type inactivation results from a localized constriction in the outer mouth of the channel pore and that the rate of inactivation is controlled by the-rate at which K+ leaves an unidentified binding site in the pore. We have functionally identified two K+ binding sites in the conduction pathway of a chimeric K+ channel that conducts Na+ in the absence of K+. One site has a high affinity for K+ and contributes to the selectivity filter mechanism for K+ over Na+. Another site, external to the high-affinity site, has a lower affinity for K+ and is not involved in channel selectivity. Binding of K+ to the high-affinity binding site slowed inactivation. Binding of cations to the external low-affinity site did not slow inactivation directly but could slow it indirectly, apparently by trapping K+ at the high-affinity site. These data support a model whereby C-type inactivation involves a constriction at the selectivity filter, and the constriction cannot proceed when the selectivity filter is occupied by K+.     

External pore collapse as an inactivation mechanism for Kv4.3 K+ channels

Kv4 channels are thought to lack a C-type inactivation mechanism (collapse of the external pore) and to inactivate as a result of a concerted action of cytoplasmic regions of the channel. To investigate whether Kv4 channels have outer pore conformational changes during the inactivation process, the inactivation properties of Kv4.3 were characterized in 0 mM and in 2 mM external K+ in whole-cell voltage-clamp experiments. Removal of external K+ increased the inactivation rates and favored cumulative inactivation by repetitive stimulation. The reduction in current amplitude during repetitive stimulation and the faster inactivation rates in 0 mM external K+ were not due to changes in the voltage dependence of channel opening or to internal K+ depletion. The extent of the collapse of the K+ conductance upon removal of external K+ was more pronounced in NMG+-than in Na+-containing solutions. The reduction in the current amplitude during cumulative inactivation by repetitive stimulation is not associated with kinetic changes, suggesting that it is due to a diminished number of functional channels with unchanged gating properties. These observations meet the criteria for a typical C-type inactivation, as removal of external K+ destabilizes the conducting state, leading to the collapse of the pore. A tentative model is presented, in which K+ bound to high-affinity K+-binding sites in the selectivity filter destabilizes an outer neighboring K+ modulatory site that is saturated at approximately 2 mM external K+. We conclude that Kv4 channels have a C-type inactivation mechanism and that previously reported alterations in the inactivation rates after N- and C- termini mutagenesis may arise from secondary changes in the electrostatic interactions between K+-binding sites in the selectivity filter and the neighboring K+-modulatory site, that would result in changes in its K+ occupancy.     

Divalent ion trapping inside potassium channels of human T lymphocytes

Using the patch-clamp whole-cell recording technique, we investigated the influence of external Ca2+, Ba2+, K+, Rb+, and internal Ca2+ on the rate of K+ channel inactivation in the human T lymphocyte-derived cell line, Jurkat E6-1. Raising external Ca2+ or Ba2+, or reducing external K+, accelerated the rate of the K+ current decay during a depolarizing voltage pulse. External Ba2+ also produced a use-dependent block of the K+ channels by entering the open channel and becoming trapped inside. Raising internal Ca2+ accelerated inactivation at lower concentrations than external Ca2+, but increasing the Ca2+ buffering with BAPTA did not affect inactivation. Raising [K+]o or adding Rb+ slowed inactivation by competing with divalent ions. External Rb+ also produced a use-dependent removal of block of K+ channels loaded with Ba2+ or Ca2+. From the removal of this block we found that under normal conditions approximately 25% of the channels were loaded with Ca2+, whereas under conditions with 10 microM internal Ca2+ the proportion of channels loaded with Ca2+ increased to approximately 50%. Removing all the divalent cations from the external and internal solution resulted in the induction of a non-selective, voltage-independent conductance. We conclude that Ca2+ ions from the outside or the inside can bind to a site at the K+ channel and thereby block the channel or accelerate inactivation.     

An engineered cysteine in the external mouth of a K+ channel allows inactivation to be modulated by metal binding.

Substitution of a cysteine in the extracellular mouth of the pore of the Shaker-delta K+ channel permits allosteric inhibition of the channel by Zn2+ or Cd2+ ions at micromolar concentrations. Cd2+ binds weakly to the open state but drives the channel into the slow (C-type) inactivated state, which has a Kd for Cd2+ of approximately 0.2 microM. There is a 45,000-fold increase in affinity when the channel changes from open to inactivated. These results indicate that C-type inactivation involves a structural change in the external mouth of the pore. This structural change is reflected in the T449C mutant as state-dependent metal affinity, which may result either from a change in proximity of the introduced cysteine residues of the four subunits or from a change of the exposure of this residue on the surface of the protein.     

Modulation of Kir1.1 inactivation by extracellular Ca and Mg

Kir1.1 inactivation, associated with transient internal acidification, is strongly dependent on external K, Ca, and Mg. Here, we show that in 1 mM K, a 15 min internal acidification (pH 6.3) followed by a 30 min recovery (pH 8.0) produced 84 ± 3% inactivation in 2 mM Ca but only 18 ± 4% inactivation in the absence of external Ca and Mg. In 100 mM external K, the same acidification protocol produced 29 ± 4% inactivation in 10 mM external Ca but no inactivation when extracellular Ca was reduced below 2 mM (with 0 Mg). However, chelation of external K with 15 mM of 18-Crown-6 (a crown ether) restored inactivation even in the absence of external divalents. External Ca was more effective than external Mg at producing inactivation, but Mg caused a greater degree of open channel block than Ca, making it unlikely that Kir1.1 inactivation arises from divalent block per se. Because the Ca sensitivity of inactivation persisted in 100 mM external K, it is also unlikely that Ca enhanced Kir1.1 inactivation by reducing the local K concentration at the outer mouth of the channel. The removal of four surface, negative side chains at E92, D97, E104, and E132 (Kir1.1b) increased the sensitivity of inactivation to external Ca (and Mg), whereas addition of a negative surface charge (N105E-Kir1.1b) decreased the sensitivity of inactivation to Ca and Mg. This result is consistent with the notion that negative surface charges stabilize external K in the selectivity filter or at the S₀-K binding site just outside the filter. Extracellular Ca and Mg probably potentiate the slow, K-dependent inactivation of Kir1.1 by decreasing the affinity of the channel for external K independently of divalent block. The removal of external Ca and Mg largely eliminated both Kir1.1 inactivation and the K-dependence of pH gating, thereby uncoupling the selectivity filter gate from the cytoplasmic-side bundle-crossing gate.     

Modulation of potassium channel gating by external divalent cations

We have examined the actions of Zn2+ ions on Shaker K channels. We found that low (100 microM) concentrations of Zn2+ produced a substantial (approximately three-fold) slowing of the kinetics of macroscopic activation and inactivation. Channel deactivation was much less affected. These results were obtained in the presence of 5 mM Mg2+ and 4 mM Ca2+ in the external solution and so are unlikely to be due to modification of membrane surface charges. Furthermore, the action of 100 microM Zn2+ on activation was equivalent to a 70-mV reduction of a negative surface potential whereas the effects on deactivation would require a 15-mV increase in surface potential. External H+ ions reduced the Zn-induced slowing of macroscopic activation with an apparent pK of 7.3. Treatment of Shaker K channels with the amino group reagent, trinitrobenzene sulfonic acid (TNBS), substantially reduced the effects of Zn2+. All these results are qualitatively similar to the actions of Zn2+ on squid K channels, indicating that the binding site may be a common motif in potassium channels. Studies of single Shaker channel properties showed that Zn2+ ions had little or no effect on the open channel current level or on the open channel lifetime. Rather, Zn2+ substantially delayed the time to first channel opening. Thus, K channels appear to contain a site to which divalent cations bind and in so doing act to slow one or more of the rate constants controlling transitions among closed conformational states of the channel.     

Charged tetracaine as an inactivation enhancer in batrachotoxin-modified Na+ channels.

Two distinct types of local anesthetics (LAs) have previously been found to block batrachotoxin (BTX)-modified Na+ channels: type 1 LAs such as cocaine and bupivacaine interact preferentially with open channels, whereas type 2 LAs, such as benzocaine and tricaine, with inactivated channels. Herein, we describe our studies of a third type of LA, represented by tetracaine as a dual blocker that binds strongly with closed channels but also binds to a lesser extent with open channels when the membrane is depolarized. Enhanced inactivation of BTX-modified Na+ channels by tetracaine was determined by steady-state inactivation measurement and by the dose-response curve. The 50% inhibitory concentration (IC50) was estimated to be 5.2 microM at -70 mV, where steady-state inactivation was maximal, with a Hill coefficient of 0.98 suggesting that one tetracaine molecule binds with one inactivated channel. Tetracaine also interacted efficiently with Na+ channels when the membrane was depolarized; the IC50 was estimated to be 39.5 microM at +50 mV with a Hill coefficient of 0.94. Unexpectedly, charged tetracaine was found to be the primary active form in the blocking of inactivated channels. In addition, external Na+ ions appeared to antagonize the tetracaine block of inactivated channels. Consistent with these results, N-butyl tetracaine quaternary ammonium, a permanently charged tetracaine derivative, remained a strong inactivation enhancer. Another derivative of tetracaine, 2-(di-methylamino) ethyl benzoate, which lacked a 4-butylamino functional group on the phenyl ring, elicited block that was approximately 100-fold weaker than that of tetracaine. We surmise that 1) the binding site for inactivation enhancers is within the Na+ permeation pathway, 2) external Na+ ions antagonize the block of inactivation enhancers by electrostatic repulsion, 3) the 4-butylamino functional group on the phenyl ring is critical for block and for the enhancement of inactivation, and 4) there are probably overlapping binding sites for both inactivation enhancers and open-channel blockers within the Na+ pore.     

K+ activation of kir3.1/kir3.4 and kv1.4 K+ channels is regulated by extracellular charges

K+ activates many inward rectifier and voltage-gated K+ channels. In each case, an increase in K+ current through the channel can occur despite a reduced driving force. We have investigated the molecular mechanism of K+ activation of the inward rectifier K+ channel, Kir3.1/Kir3.4, and the voltage-gated K+ channel, Kv1.4. In the Kir3.1/Kir3.4 channel, mutation of an extracellular arginine residue, R155, in the Kir3.4 subunit markedly reduced K+ activation of the channel. The same mutation also abolished Mg2+ block of the channel. Mutation of the equivalent residue in Kv1.4 (K532) abolished K+ activation as well as C-type inactivation of the Kv1.4 channel. Thus, whereas C-type inactivation is a collapse of the selectivity filter, K+ activation could be an opening of the selectivity filter. K+ activation of the Kv1.4 channel was enhanced by acidic pH. Mutation of an extracellular histidine residue, H508, that mediates the inhibitory effect of protons on Kv1.4 current, abolished both K+ activation and the enhancement of K+ activation at acidic pH. These results suggest that the extracellular positive charges in both the Kir3.1/Kir3.4 and the Kv1.4 channels act as "guards" and regulate access of K+ to the selectivity filter and, thus, the open probability of the selectivity filter. Furthermore, these data suggest that, at acidic pH, protonation of H508 inhibits current through the Kv1.4 channel by decreasing K+ access to the selectivity filter, thus favoring the collapse of the selectivity filter.     

Localization of the K+ lock-In and the Ba2+ binding sites in a voltage-gated calcium-modulated channel. Implications for survival of K+ permeability.

Using Ba2+ as a probe, we performed a detailed characterization of an external K+ binding site located in the pore of a large conductance Ca2+-activated K+ (BKCa) channel from skeletal muscle incorporated into planar lipid bilayers. Internal Ba2+ blocks BKCa channels and decreasing external K+ using a K+ chelator, (+)-18-Crown-6-tetracarboxylic acid, dramatically reduces the duration of the Ba2+-blocked events. Average Ba2+ dwell time changes from 10 s at 10 mM external K+ to 100 ms in the limit of very low [K+]. Using a model where external K+ binds to a site hindering the exit of Ba2+ toward the external side (Neyton, J., and C. Miller. 1988. J. Gen. Physiol. 92:549-568), we calculated a dissociation constant of 2.7 mircoM for K) at this lock-in site. We also found that BK(Ca) channels enter into a long-lasting nonconductive state when the external [K+] is reduced below 4 microM using the crown ether. Channel activity can be recovered by adding K+, Rb+, Cs+, or NH4+ to the external solution. These results suggest that the BK(Ca) channel stability in solutions of very low [K+] is due to K+ binding to a site having a very high affinity. Occupancy of this site by K+ avoids the channel conductance collapse and the exit of Ba2+ toward the external side. External tetraethylammonium also reduced the Ba2+ off rate and impeded the channel from entering into the long-lasting nonconductive state. This effect requires the presence of external K+. It is explained in terms of a model in which the conduction pore contains Ba2+, K+, and tetraethylammonium simultaneously, with the K+ binding site located internal to the tetraethylammonium site. Altogether, these results and the known potassium channel structure (Doyle, D.A., J.M. Cabral, R.A. Pfuetzner, A. Kuo, J.M. Gulbis, S.L. Cohen, B.T. Chait, and R. MacKinnon. 1998. Science. 280:69-77) imply that the lock-in site and the Ba2+ sites are the external and internal ion sites of the selectivity filter, respectively.     

Block by internal Mg2+ causes voltage-dependent inactivation of Kv1.5

Internal Mg2+ blocks many potassium channels including Kv1.5. Here, we show that internal Mg2+ block of Kv1.5 induces voltage-dependent current decay at strongly depolarised potentials that contains a component due to acceleration of C-type inactivation after pore block. The voltage-dependent current decay was fitted to a bi-exponential function (tau(fast) and tau(slow)). Without Mg2+, tau(fast) and tau(slow) were voltage-independent, but with 10 mM Mg2+, tau(fast) decreased from 156 ms at +40 mV to 5 ms at +140 mV and tau(slow) decreased from 2.3 s to 206 ms. With Mg2+, tail currents after short pulses that allowed only the fast phase of decay showed a rising phase that reflected voltage-dependent unbinding. This suggested that the fast phase of voltage-dependent current decay was due to Mg2+ pore block. In contrast, tail currents after longer pulses that allowed the slow phase of decay were reduced to almost zero suggesting that the slow phase was due to channel inactivation. Consistent with this, the mutation R487V (equivalent to T449V in Shaker) or increasing external K+, both of which reduce C-type inactivation, prevented the slow phase of decay. These results are consistent with voltage-dependent open-channel block of Kv1.5 by internal Mg2+ that subsequently induces C-type inactivation by restricting K+ filling of the selectivity filter from the internal solution.     

Recovery from C-type inactivation is modulated by extracellular potassium.

Extracellular potassium modulates recovery from C-type inactivation of Kv1.3 in human T lymphocytes. The results of whole-cell patch clamp recordings show that there is a linear increase in recovery rate with increasing [K+]o. An increase from 5 to 150 mM K+o causes a sixfold acceleration of recovery rate at a holding potential of -90 mV. Our results suggest that 1) a low-affinity K+ binding site is involved in recovery, 2) the rate of recovery increases with hyperpolarization, 3) potassium must bind to the channel before inactivation to speed its recovery, and 4) recovery rate depends on external [K+] but not on the magnitude of the driving force through open channels. We present a model in which a bound K+ ion destabilizes the inactivated state to increase the rate of recovery of C-type inactivation, thereby providing a mechanism for autoregulation of K+ channel activity. The ability of K+ to regulate its own conductance may play a role in modulating voltage-dependent immune function.     

A permanent ion binding site located between two gates of the Shaker K+ channel.

K+ channels can be occupied by multiple permeant ions that appear to bind at discrete locations in the conduction pathway. Neither the molecular nature of the binding sites nor their relation to the activation or inactivation gates that control ion flow are well understood. We used the permeant ion Ba2+ as a K+ analog to probe for K+ ion binding sites and their relationship to the activation and inactivation gates. Our data are consistent with the existence of three single-file permeant-ion binding sites: one deep site, which binds Ba2+ with high affinity, and two more external sites whose occupancy influences Ba2+ movement to and from the deep site. All three sites are accessible to the external solution in channels with a closed activation gate, and the deep site lies between the activation gate and the C-type inactivation gate. We identify mutations in the P-region that disrupt two of the binding sites, as well as an energy barrier between the sites that may be part of the selectivity filter.     

Extracellular Ba2+ and voltage interact to gate Ca2+ channels at the plasma membrane of stomatal guard cells

Ca2+ channels at the plasma membrane of stomatal guard cells contribute to increases in cytosolic free [Ca2+] ([Ca2+](i)) that regulate K+ and Cl- channels for stomatal closure in higher-plant leaves. Under voltage clamp, the initial rate of increase in [Ca2+](i) in guard cells is sensitive to the extracellular divalent concentration, suggesting a close interaction between the permeant ion and channel gating. To test this idea, we recorded single-channel currents across the Vicia guard cell plasma membrane using Ba2+ as a charge carrying ion. Unlike other Ca2+ channels characterised to date, these channels activate at hyperpolarising voltages. We found that the open probability (P(o)) increased strongly with external Ba2+ concentration, consistent with a 4-fold cooperative action of Ba2+ in which its binding promoted channel opening in the steady state. Dwell time analyses indicated the presence of a single open state and at least three closed states of the channel, and showed that both hyperpolarising voltage and external Ba2+ concentration prolonged channel residence in the open state. Remarkably, increasing Ba2+ concentration also enhanced the sensitivity of the open channel to membrane voltage. We propose that Ba2+ binds at external sites distinct from the permeation pathway and that divalent binding directly influences the voltage gate.     

Block of inwardly rectifying K+ currents by extracellular Mg2+ and Ba2+ in bovine pulmonary artery endothelial cells

Using whole-cell patch clamp technique, we investigated the blocking effects of extracellular Ba2+ and Mg2+ on the inwardly rectifying K+ (KIR) currents of bovine pulmonary artery endothelial cells (BPAEC). The BPAEC KIR channel has recently been identified as Kir2.1 of the Kir2.0 subfamily. Block of KIR currents by Mg2+ (3-30 mM) was instantaneous, and increased with hyperpolarization slightly (Kd at -160 and 0 mV was 9.5 and 23.2 mM, respectively). The apparent fractional electrical distance (delta) of the Mg2+ binding site is calculated to be 0.07 from the outer mouth of the channel pore. Ba2+ (0.3-10 microM) time-dependently blocked the KIR currents with a much higher potency and stronger voltage-dependence (Kd at -160 and 0 mV was 1.0 and 41.6 microM, respectively). The Ba2+ binding site had a delta value of 0.34. Our data suggest that Mg2+ binds to a very superficial site of the KIR channel, while Ba2+ binds to a much deeper site, sensing much more of the membrane electric field. Thus, the BPAEC Kir2.1 appears to be pharmacologically different from the Kir2.1 reported before in bovine aortic endothelial cells (BAEC), which has 2 sites for Mg2+ block (a deep site in addition to a shallow one), and a superficial and low-sensitivity site for Ba2+ block.     

Mechanism of K+ channel block by verapamil and related compounds in rat alveolar epithelial cells

The mechanism by which the phenylalkylamines, verapamil and D600, and related compounds, block inactivating delayed rectifier K+ currents in rat alveolar epithelial cells, was investigated using whole-cell tight- seal recording. Block by phenylalkylamines added to the bath resembles state-dependent block of squid K+ channels by internally applied quarternary ammonium ions (Armstrong, C.M. 1971. Journal of General Physiology. 58:413-437): open channels are blocked preferentially, increased [K+]o accelerates recovery from block, and recovery occurs mainly through the open state. Slow recovery from block is attributed to the existence of a blocked-inactivated state, because recovery was faster in three situations where recovery from inactivation is faster: (a) at high [K+]o, (b) at more negative potentials, and (c) in cells with type l K+ channels, which recover rapidly from inactivation. The block rate was used as a bioassay to reveal the effective concentration of drug at the block site. When external pH, pHo, was varied, block was much faster at pHo 10 than pHo 7.4, and very slow at pHo 4.5. The block rate was directly proportional to the concentration of neutral drug in the bath, suggesting that externally applied drug must enter the membrane in neutral form to reach the block site. High internal pH (pHi 10) reduced the apparent potency of externally applied phenylalkylamines, suggesting that the cationic form of these drugs blocks K+ channels at an internal site. The permanently charged analogue D890 blocked more potently when added to the pipette than to the bath. However, lowering pHi to 5.5 did not enhance block by external drug, and tertiary phenylalkylamines added to the pipette solution blocked weakly. This result can be explained if drug diffuses out of the cell faster than it is delivered from the pipette, the block site is reached preferentially via hydrophobic pathways, or both. Together, the data indicate the neutral membrane-bound drug blocks K+ channels more potently than intracellular cationic drug. Neutral drug has rapid access to the receptor, where block is stabilized by protonation of the drug from the internal solution. In summary, externally applied phenylalkylamines block open or inactivated K+ channels by partitioning into the cell membrane in neutral form and are stabilized at the block site by protonation.     

Competitive binding interaction between Zn2+ and saxitoxin in cardiac Na+ channels. Evidence for a sulfhydryl group in the Zn2+/saxitoxin binding site.

Mammalian heart Na+ channels exhibit approximately 100-fold higher affinity for block by external Zn2+ than other Na+ channel subtypes. With batrachotoxin-modified Na+ channels from dog or calf heart, micromolar concentrations of external Zn2+ result in a flickering block to a substate level with a conductance of approximately 12% of the open channel at -50 mV. We examined the hypothesis that, in this blocking mode, Zn2+ binds to a subsite of the saxitoxin (STX) binding site of heart Na+ channels by single-channel analysis of the interaction between Zn2+ and STX and also by chemical modification experiments on single heart Na+ channels incorporated into planar lipid bilayers in the presence of batrachotoxin. We found that external Zn2+ relieved block by STX in a strictly competitive fashion. Kinetic analysis of this phenomenon was consistent with a scheme involving direct binding competition between Zn2+ and STX at a single site with intrinsic equilibrium dissociation constants of 30 nM for STX and 30 microM for Zn2+. Because high-affinity Zn2(+)-binding sites often include sulfhydryl groups as coordinating ligands of this metal ion, we tested the effect of a sulfhydryl-specific alkylating reagent, iodoacetamide (IAA), on Zn2+ and STX block. For six calf heart Na+ channels, we observed that exposure to 5 mM IAA completely abolished Zn2+ block and concomitantly modified STX binding with at least 20-fold reduction in affinity. These results lead us to propose a model in which Zn2+ binds to a subsite within or near the STX binding site of heart Na+ channels. This site is also presumed to contain one or more cysteine sulfhydryl groups.     

Divalent cation block and competition between divalent and monovalent cations in the large-conductance K+ channel from Chara australis

The patch-clamp technique is used to investigate divalent ion block of the large-conductance K+ channel from Chara australis. Block by Ba2+, Ca2+, Mg2+, and Pt(NH3)4(2+) from the vacuolar and cytoplasmic sides is used to probe the structure of, and ion interactions within, the pore. Five divalent ion binding sites are detected. Vacuolar Ca2+ reduces channel conductance by binding to a site located 7% along the membrane potential difference (site 1, delta = 0.07; from the vacuolar side); it also causes channel closures with mean a duration of approximately 0.1-1 ms by binding at a deeper site (site 2, delta = 0.3). Ca2+ can exit from site 2 into both the vacuolar and cytoplasmic solutions. Cytoplasmic Ca2+ reduces conductance by binding at two sites (site 3, delta = -0.21; site 4, delta = -0.6; from the cytoplasmic side) and causes closures with a mean duration of 10-100 ms by binding to site 5 (delta = -0.7). The deep sites exhibit stronger ion specificity than the superficial sites. Cytoplasmic Ca2+ binds sequentially to sites 3-5 and Ca2+ at site 5 can be locked into the pore by a second Ca2+ at site 3 or 4. Ca2+ block is alleviated by increasing [K+] on the same side of the channel. Further, Ca2+ occupancy of the deep sites (2, 4, and 5) is reduced by K+, Rb+, NH4+, and Na+ on the opposite side of the pore. Their relative efficacy correlates with their relative permeability in the channel. While some Ca2+ and K+ sites compete for ions, Ca2+ and K+ can simultaneously occupy the channel. Ca2+ binding at site 1 only partially blocks channel conduction. The results suggest the presence of four K+ binding sites on the channel protein. One cytoplasmic facing site has an equilibrium affinity of 10 mM (site 6, delta = -0.3) and one vacuolar site (site 7, delta less than 0.2) has low affinity (greater than 500 mM). Divalent ion block of the Chara channel shows many similarities to that of the maxi-K channel from rat skeletal muscle.     

K(+) occupancy of the N-methyl-d-aspartate receptor channel probed by Mg(2+) block

The single-channel kinetics of extracellular Mg(2+) block was used to probe K(+) binding sites in the permeation pathway of rat recombinant NR1/NR2B NMDA receptor channels. K(+) binds to three sites: two that are external and one that is internal to the site of Mg(2+) block. The internal site is approximately 0.84 through the electric field from the extracellular surface. The equilibrium dissociation constant for this site for K(+) is 304 mM at 0 mV and with Mg(2+) in the pore. The occupancy of any one of the three sites by K(+) effectively prevents the association of extracellular Mg(2+). Occupancy of the internal site also prevents Mg(2+) permeation and increases (by approximately sevenfold) the rate constant for Mg(2+) dissociation back to the extracellular solution. Under physiological intracellular ionic conditions and at -60 mV, there is approximately 1,400-fold apparent decrease in the affinity of the channel for extracellular Mg(2+) and approximately 2-fold enhancement of the apparent voltage dependence of Mg(2+) block caused by the voltage dependence of K(+) occupancy of the external and internal sites.     

Voltage-dependent inactivation gating at the selectivity filter of the MthK K+ channel

Voltage-dependent K(+) channels can undergo a gating process known as C-type inactivation, which involves entry into a nonconducting state through conformational changes near the channel's selectivity filter. C-type inactivation may involve movements of transmembrane voltage sensor domains, although the mechanisms underlying this form of inactivation may be heterogeneous and are often unclear. Here, we report on a form of voltage-dependent inactivation gating observed in MthK, a prokaryotic K(+) channel that lacks a canonical voltage sensor and may thus provide a reduced system to inform on mechanism. In single-channel recordings, we observe that Po decreases with depolarization, with a half-maximal voltage of 96 ± 3 mV. This gating is kinetically distinct from blockade by internal Ca(2+) or Ba(2+), suggesting that it may arise from an intrinsic inactivation mechanism. Inactivation gating was shifted toward more positive voltages by increasing external [K(+)] (47 mV per 10-fold increase in [K(+)]), suggesting that K(+) binding at the extracellular side of the channel stabilizes the open-conductive state. The open-conductive state was stabilized by other external cations, and selectivity of the stabilizing site followed the sequence: K(+) ≈ Rb(+) > Cs(+) > Na(+) > Li(+) ≈ NMG(+). Selectivity of the stabilizing site is weaker than that of sites that determine permeability of these ions, suggesting that the site may lie toward the external end of the MthK selectivity filter. We could describe MthK gating over a wide range of positive voltages and external [K(+)] using kinetic schemes in which the open-conductive state is stabilized by K(+) binding to a site that is not deep within the electric field, with the voltage dependence of inactivation arising from both voltage-dependent K(+) dissociation and transitions between nonconducting (inactivated) states. These results provide a quantitative working hypothesis for voltage-dependent, K(+)-sensitive inactivation gating, a property that may be common to other K(+) channels.     

Demonstration of cooperating alpha subunits in working (Na+ + K+)-ATPase by the use of the MgATP complex analogue cobalt tetrammine ATP

The MgATP complex analogue cobalt-tetrammine-ATP [Co(NH3)4ATP] inactivates (Na+ + K+)-ATPase at 37 degrees C slowly in the absence of univalent cations. This inactivation occurs concomitantly with incorporation of radioactivity from [alpha-32P]Co(NH3)4ATP and from [gamma-32P]Co(NH3)4ATP into the alpha subunit. The kinetics of inactivation are consistent with the formation of a dissociable complex of Co(NH3)4ATP with the enzyme (E) followed by the phosphorylation of the enzyme: (Formula: see text). The dissociation constant of the enzyme-MgATP analogue complex at 37 degrees C is Kd = 500 microM, the inactivation rate constant k2 = 0.05 min-1. ATP protects the enzyme against the inactivation by Co(NH3)4ATP due to binding at a site from which it dissociates with a Kd of 360 microM. It is concluded, therefore, that Co(NH3)4ATP binds to the low-affinity ATP binding site of the E2 conformational state. K+, Na+ and Mg2+ protect the enzyme against the inactivation by Co(NH3)4ATP. Whilst Na+ or Mg2+ decrease the inactivation rate constant k2, K+ exerts its protective effect by increasing the dissociation constant of the enzyme.Co(NH3)4ATP complex. The Co(NH3)4ATP-inactivated (Na+ + K+)-ATPase, in contrast to the non-inactivated enzyme, incorporates [3H]ouabain. This indicates that the Co(NH3)4ATP-inactivated enzyme is stabilized in the E2 conformational state. Despite the inactivation of (Na+ + K+)-ATPase by Co(NH3)4ATP from the low-affinity ATP binding site, there is no change in the capacity of the high-affinity ATP binding site (Kd = 0.9 microM) nor of its capability to phosphorylate the enzyme Na+-dependently. Since (Na+ + K+)-ATPase is phosphorylated Na+-dependently from the high-affinity ATP binding site although the catalytic cycle is arrested in the E2 conformational state by specific modification of the low-affinity ATP binding site, it is concluded that both ATP binding sites coexist at the same time in the working sodium pump. This demonstration of interacting catalytic subunits in the E1 and E2 conformational states excludes the proposal that a single catalytic subunit catalyzes (Na+ + K+)-transport.