Production of poly(3-hydroxybutyrate) from whey by fed-batch culture of recombinant Escherichia coli in a pilot-scale fermenter

Production of poly(3-hydroxybutyrate) [P(3HB)] from wheyby fed-batch culture of recombinant Escherichia coli CGSC 4401 harboring a plasmid containing the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes was examined in a 30 l fermenter supplying air only. With lactose below 2 g l^–1, cells grew to 12 g dry cell l^–1 with 9% (w/w) P(3HB) content. Accumulation of P(3HB) could be triggered by increasing lactose to 20 g l^–1. By employing this strategy, 51 g dry cell l^–1 was obtained with a 70% (w/w) P(3HB) content after 26 h. The productivity was 1.35 g P(3HB) l^–1 h^–1. The same fermentation strategy was used in a 300 l fermenter, and 30 g dry cell l^–1 with 67% (w/w) P(3HB) content was obtained in 20 h.     

Production of poly(3-hydroxybutyrate) from whey by cell recycle fed-batch culture of recombinant Escherichia coli

A new fermentation strategy using cell recycle membrane system was developed for the efficient production of poly(3-hydroxybutyrate) (PHB) from whey by recombinant Escherichia coli strain CGSC 4401 harboring the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes. By cell recycle, fed-batch cultivation employing an external membrane module, the working volume of fermentation could be constantly maintained at 2.3 l. The final cell concentration, PHB concentration and PHB content of 194 g l^–1, 168 g l^–1 and 87%, respectively, were obtained in 36.5 h by the pH-stat cell recycle fed-batch culture using whey solution concentrated to contain 280 g lactose l^–1 as a feeding solution, resulting in a high productivity of 4.6 g PHB l^–1 h^–1.     

Poly(3-hydroxybutyrate) synthesis in fed-batch culture of Ralstonia eutropha with phosphate limitation under different glucose concentrations

Poly(3-hydroxybutyrate) (PHB) was produced by fed-batch cultures of Ralstonia eutropha with phosphate limitation under different glucose concentrations. When glucose was kept at 2.5 g l^–1, cell growth and PHB synthesis were limited due to the shortage of carbon source but a higher PHB content occurred in the cell-growth stage. This shows that a low glucose concentration is favorable for PHB accumulation in R. eutropha. PHB obtained with glucose at 9 g l^–1 is 1.6 times that obtained with 40 g l^–1. When glucose was in the range of 9 to 40 g l^–1, PHB concentration and productivity decreased significantly with the increase of glucose concentration. The highest PHB productivity was obtained with glucose at 9 g l^–1.     

Batch propagation of Lactobacillus helveticus for production of lactic acid from lactose concentrated cheese whey with microaeration and nutrient supplementation

Continuous mix batch bioreactors were used to study the kinetic parameters of lactic acid fermentation in microaerated-nutrient supplemented, lactose concentrated cheese whey using Lactobacillus helveticus. Four initial lactose concentrations ranging from 50 to 150 g l^–1 were first used with no microaeration and no yeast extract added to establish the substrate concentration above which inhibition will occur and then the effects of microaeration and yeast extract on the process kinetic parameters were investigated. The experiments were conducted under controlled pH (5.5) and temperature (42 °C) conditions. The results indicated that higher concentrations of lactose had an inhibitory effect as they increased the lag period and the fermentation time; and decreased the specific growth rate, the maximum cell number, the lactose utilization rate, and the lactic acid production rate. The maximum lactic acid conversion efficiency (75.8%) was achieved with the 75 g l^–1 initial lactose concentration. The optimum lactose concentration for lactic acid production was 75 g l^–1 although Lactobacillus helveticus appeared to tolerate up to 100 g l^–1 lactose concentration. Since the lactic acid productivity is of a minor importance compared to lactic acid concentration when considering the economic feasibility of lactic acid production from cheese whey using Lactobacillus helveticus, a lactose concentration of up to 100 g l^–1 is recommended. Using yeast extract and/or microaeration increased the cell number, specific growth rate, cell yield, lactose consumption, lactic acid utilization rate, lactic acid concentration and lactic acid yield; and reduced the lag period, fermentation time and residual lactose. Combined yeast extract and microaeration produced better results than each one alone. From the results it appears that the energy uncoupling of anabolism and catabolism is the major bottleneck of the process. Besides lactic acid production, lactose may also be hydrolysed into glucose and galactose. The -galactosidase activity in the medium is caused by cell lysis during the exponential growth phase. The metabolic activities of Lactobacillus helveticus in the presence of these three sugars need further investigation.     

Production of cellulases in batch culture using a mutant strain of Trichoderma reesei growing on soluble carbon source

Trichoderma reesei Rut-C30 is a highly derepressed mutant which synthesised active cellulases in culture media containing glucose and lactose as the only carbon sources. The maximum biomass, filter paper and specific filter paper activities for cell growth on 20 g glucose l^–1 were 20 g dry cell wt l^–1, 1.9 FPU ml^–1 and 4.8 FPU mg^–1 protein respectively, while on 40 g glucose l^–1 were 25 g dry cell wt l^–1, 4.5 FPU ml^–1 and 6.2 FPU mg^–1 protein, respectively. This strain had a higher specific filter paper activity (6.2 FPU mg^–1 protein) than was produced by other T. reesei mutants (3.6 FPU mg^–1 protein).     

Evaluation of the potential of Aspergillus niger species for the bioconversion of L-phenylalanine into 2-phenylethanol

Aspergillus niger was explored, for the first time, for the production of 2-phenylethanol (a rose-like aroma) using L-phenylalanine as precursor. Among the strains screened, A. niger CMICC 298302 was shown to produce, in a culture medium containing 6 g L-phenylalanine l^–1 and 60 g glucose l^–1, 1375 mg 2-phenylethanol l^–1 with a productivity of 153 mg l^–1 day^–1 and a molar yield of 74%. 2-Phenylethanol concentrations of 1 to 2 g l^–1 led to a two-fold and ten-fold decrease, respectively, in the mycelial radial growth rate. However, 2-phenylethanol was synthesized as the sole aromatic product and accumulated in the culture broth.     

Exopolysaccharide biosynthesis and related enzyme activities of the medicinal fungus, Ganoderma lucidum, grown on lactose in a bioreactor

Exopolysaccharide (EPS) production and biosynthesis were studied in Ganoderma lucidum, a fungus used in traditional Chinese medicine, grown with lactose in a bioreactor. -Galactosidase activity, which implies the existence of a lactose permease system, was induced by lactose. Lactose feeding also increased -phosphoglucomutase activity and EPS accumulation but decreased phosphoglucose isomerase activity and lactate concentration in the culture broth. A maximum cell density of 22 g l^–1 and EPS at 1.25 g l^–1 were obtained in fed-batch bioreactor culture.     

Lactosucrose production by various microorganisms harboring levansucrase activity

Production of the artificial sweetener, lactosucrose, by various microorganisms containing levansucrase activity was investigated. Of the tested bacteria, Bacillus subtilis was the most effective producer using lactose as an acceptor and sucrose as a fructosyl donor. Lactosucrose production by this strain was optimal at pH 6.0 and 55 °C whereupon 181 g lactosucrose l^–1 was produced from 225 g lactose l^–1 and 225 g sucrose l^–1 in 10 h.     

Protein production from whey usingPenicillium cyclopium; growth parameters and cellular composition

Summary The growth parameters ofPenicillium cyclopium have been evaluated in a continuous culture system for the production of fungal protein from whey. Dilution rates varied from 0.05 to 0.20 h^–1 under constant conditions of temperature (28°C) and pH (3.5). The saturation coefficients in the Monod equation were 0.74 g l^–1 for lactose and 0.14 mg l^–1 for oxygen, respectively. For a wide range of dilution rates, the yield was 0.68 g g^–1 biomass per lactose and the maintenance coefficient 0.005 g g^–1 h^–1 lactose per biomass, respectively. The maximum biomass productivity achieved was 2 g l^–1 h^–1 biomass at dilution rates of 0.16–0.17 h^–1 with a lactose concentration of 20 g l^–1 in the feed. The crude protein and total nucleic acid contents increased with a dilution rate, crude protein content varied from 43% to 54% and total nucleic acids from 6 to 9% in the range of dilution rates from 0.05 to 0.2 h^–1, while the Lowry protein content was almost constant at approximately 37.5% of dry matter.Nomenclature (mg l^–1) C_o initial concentration of dissolved oxygen - (h^–1) D dilution rate - (mg l^–1) K₀₂ saturation coefficient for oxygen - (g l^–1) K_s saturation coefficient for substrate - (g g^–1 h^–1) lactose per biomass) m maintenance energy coefficient - (mM g^–1 h^–1O₂ per biomass) Q₀₂ specific oxygen uptake rate - (g l^–1) S residual substrate concentration at steady state - (g l^–1) S_o initial substrate concentration in feed - (min) t_1/2 time when C_o is equal to C_o/2 - (g l^–1) X biomass concentration - (g l^–1) X biomass concentration at steady state - (g g^–1 biomass per lactose) Y_G yield coefficient for cell growth - (g g^–1 biomass per lactose) Y_x/s overall yield coefficient - (h^–1) specific growth rate     

Fermentative production of P(3HB-co-3HV) from propionic acid by Alcaligenes eutrophus in fed-batch culture with pH-stat continuous substrate feeding method

The feeding of propionic acid for production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] by Alcaligenes eutrophus ATCC17697 was optimized using a fed-batch culture system. The concentration of propionic acid was maintained at 3 g l^–1 as growth was inhibited by propionic acid in the broth. A pH-stat substrate feeding system was used in which propionic acid was fed automatically to maintain a pH of the culture broth at 7.0. By feeding a substrate solution containing 20% (w/v) propionic acid, 4.9% (w/v) ammonia water [at a molar ratio of carbon to nitrogen (C/N molar ratio) of 10] in cell growth phase, the concentration of propionic acid in the broth was maintained at 3 g l^–1 giving a specific growth rate of 0.4 h^–1. To promote P(3HB-co-3HV) production, two stage fed-batch culture which consisted of the stage for the cell growth and the stage for the P(3HB-co-3HV) accumulation was carried out. When the substrate solution whose C/N molar ratio was 50 was fed in P(3HB-co-3HV) accumulation phase, the cell concentration and the P(3HB-co-3HV) content in the cells reached 64 g l^–1 and 58% (w/w) in 55.5 h, respectively.     

Production of a fusion protein of sweet potato sporamin from recombinant E. coli XL1 Blue by fed-batch fermentations

Glucose-stat and pH-stat control strategies were employed in order to culture a recombinant E. coli XL1 Blue to produce a fusion protein of sweet potato sporamin (SPA) and glutathione S-transferase (GST) from the recombinant E. coli XL1 Blue. Cell densities up to 25 g l^–1 and 28.9 mg fusion protein (GST-SPA) g^–1 cell dry weight (CDW) was achieved from a fed-batch fermentation controlled by glucose-stat strategy. A pH-stat control fermentation using glycerol as a carbon source gave E. coli up to 27 g l^–1 and 31.5 mg GST-SPA g^–1 CDW. Additionally, a pH-stat control strategy using glucose as a carbon source gave E. coli up to 15 g l^–1 and about 22.7 mg g^–1 CDW of GST-SPA.     

L-Sorbose production in a continuous fermenter with and without cell recycle

The kinetics of continuous l-sorbose fermentation using Acetobacter suboxydans with and without cell recycle (100%) were investigated at dilution rates (D) of 0.05, 0.10, 0.15 and 0.3 h^–1. The biomass and sorbose concentrations for continuous fermentation without recycle increased as the dilution rate was increased from 0.05 to 0.10 h^–1. A maximum biomass concentration of 8.44 g l^–1 and sorbose concentration of 176.90 g l^–1 were obtained at D=0.10 h^–1. The specific rate of sorbose production and volumetric sorbose productivity at this dilution rate were 2.09 g g^–1 h^–1 and 17.69 g l^–1 h^–1. However, on further increasing the dilution rate to 0.3 h^–1, both biomass and sorbose concentrations decreased to 2.93 and 73.20 g l^–1 respectively, mainly due to washout of the reactor contents. However, the specific rate of sorbose formation and volumetric sorbose productivity at this dilution rate increased to 7.49 g g^–1 h^–1 and 21.96 g l^–1 h^–1 respectively. Continuous fermentation with 100% cell recycle served to further enhance the concentration of biomass and sorbose to 28.27 and 184.32 g l^–1 respectively (in the reactor at a dilution rate of 0.05 h^–1). Even though, there was a decline in the biomass and sorbose concentrations to 6.8 and 83.40 g l^–1 at a dilution rate of 0.3 h^–1, the specific rates of sorbose formation and volumetric sorbose productivity increased to 3.67 g g^–1h^–1 and 25.02 g l^–1 h^–1.     

Temperature downshift increases recombinant cytokine titer in Streptomyces lividans fermentation

Recombinant human interleukin-3 (rhIL-3) production by a Streptomyces lividans strain is subject to severe proteolytic degradation. Human interleukin-3 (rhIL-3) concentration in the culture supernatant typically reaches 100–120 mg l^–1 about 20 h after inoculation, but the titer drops rapidly as the result of proteolysis. Reducing the culture temperature at this point has a dramatic effect on product yield, increasing the final concentration in the supernatant at least two-fold.     

Influence of medium composition and aeration on the synthesis of biosurfactants produced by Candida antarctica

Candida antarctica synthesised surface-active mannosylerythritol lipids at 46 g l^–1 by adding 80 g soybean oil l^–1 to the medium and maintaining the pO₂ at 50% with an air flow rate 1 vvm. Two-stage culturing of C. antarctica avoided medium foaming but the yield of biosurfactants synthesis was 28 g l^–1. The biosurfactants decreased the surface tension of water to 35 mN m^–1.     

2-Propanol degradation by Sulfolobus solfataricus

Sulfolobus solfataricus used 2-propanol and 2-propanone (acetone) when grown in static cultures at 78 °C with or without glucose at 10 g l^–1. The presence of 3.92 g 2-propanol l^–1 in both cases inhibited growth. However, acetone accumulation following 2-propanol depletion suggested that 2-propanol was co-metabolized via the acetone metabolic pathway. Glucose at 10 g l^–1 increased 2-propanol and acetone utilization from 0.93 g l^–1 to 1.77 g l^–1 and from 0.11 g l^–1 to 1.62 g l^–1, respectively. Without glucose, immobilized S. solfataricus cells increased the 2-propanol removal rate to 0.035 g l^–1 h^–1, compared to 0.0012 g l^–1 h^–1 by its suspended counterpart. The results suggest the establishment of an immobilized reactor configuration is preferential for the treatment of high temperature solvent waste streams by this acidothermophilic Crenarchaeon.     

Sophorolipid Production with High Yields on Whey Concentrate and Rapeseed Oil without Consumption of Lactose

Sophorolipids were produced by single-step batch cultivation of Candida bombicola ATCC 22214 on deproteinized whey concentrate and repeated feed of rapeseed oil. A mild sterilization method for whey was developed. High yields of 280 g dry sophorolipids l^–1 were obtained from deproteinized whey concentrate containing 100 g lactose l^–1 and 300 g rapeseed oil l^–1. Surprisingly, the whey lactose was not consumed by the organism. Growth only on the oil was assumed and a high lipase activity of 24 U per g cell dry weight resulted.     

Isolation and study of two strains ofLeptospirillum-like bacteria from a natural mixed population cultured on a cobaltiferous pyrite substrate

Two strains ofLeptospirillum-like bacteria, L6 and L8, have been isolated from a mixed inoculum, also containingThiobacillus ferrooxidans andT. thiooxidans, cultured for one year with a colbaltiferous pyrite as energy substrate in a 100 I continuous bioleaching laboratory unit. Several physiological properties of the strains are described. The vibrio-shaped microorganisms grew at pH values lower than 1.3. Their growth rate was maximum between 2.5 and 8.0 g l¹ ferrous iron. The optimal growth temperature was 37.5° C. Ferric iron had a stimulative effect on bacterial development up to 8 g l^–1, and growth was as rapid at 14 g l^–1 ferric iron as at 8 g l^–1. The negative influence of cobalt on the final cell concentration was observed at 0.5 g l^–1, but the growth rate was not affected up to 2 g l^–1. The G + C content of strains L8 is 55.6 mol%.     

Lactic acid fermentation by Lactobacillus casei in free cell form and immobilised on gluten pellets

A comparative study of the fermentation of a range of carbohydrate substrates, at various temperatures, was carried out using a commercial Lactobacillus casei strain in a free cell form and immobilised on gluten pellets. This strain required yeast extract, l-cysteine HCl and Mn²⁺ at 5, 0.5 and 0.1 g l^–1, respectively, for maximum growth and lactic acid production. Sugar fermentation using free cells showed preference in the order glucose, sucrose, fructose while lactose was poorly utilised. Optimum temperature for growth and lactic acid production over (18–30 h) was 43 °C. L. casei was successfully immobilised on gluten pellets and fermented glucose and sucrose in a shorter time (18 h) with increased lactic acid production (42 and 41 g l^–1 on glucose and sucrose, respectively).     

Establishment of Orthosiphon stamineus Cell Suspension Culture for Cell Growth

Callus of Orthosiphon stamineus could be induced successfully from petiole, leaf and stem tissues but not roots when cultured on MS medium containing different concentration of NAA (0–4.0 mg l^–1) and 2,4-D (0–2.0 mg l^–1). Highest fresh weight callus production was obtained from leaf explants and those with best friability were obtained on MS medium plus 1.0 mg l^–1 2,4-D plus 1.0 mg l^–1 NAA. Cell suspension cultures were established from these cultures. The appropriate cell inoculum size for the best cell growth was 0.75 g of cells in 20 ml culture medium. Cell suspension culture using MS medium supplemented with 1.0 mg l^–1 2,4-D promoted the best cell growth with maximum biomass of 8.609 g fresh weight and 0.309 g dry weight 24 days after inoculation. Cells that grew in MS medium supplemented with 1.0 mg l^–1 2,4-D reached the stationary growth phase in 15 days as compared to the cells that grew in MS medium supplemented with 1.0 mg l^–1 2,4-D + 1.0 mg l^–1 NAA reached the stationary phase in 24 days. MS medium supplemented with 1.0 mg l^–1 2,4-D was considered as the maintenance medium for maintaining the optimum cell growth of O. stamineus in the cell suspension cultures with 2-week interval subculture.     

Production of S-adenosyl- L-methionine by a mutant strain of Kluyveromyces lactis

S-Adenosyl-l-methionine (AdoMet) was produced by a mutant strain Kluyveromyces lactis AM-65 grown on whey. A full factorial design method of three factors – (NH₄)₂SO₄ (factor x ₁), corn steep liquor (factor x ₂) and l-methionine (factor x ₃) on three levels – was used to determine the optimal medium conditions for the production of AdoMet. A time course shake-flask experiment in optimal whey medium (x ₁=3.1 g l^–1, x ₂=12.7 g l^–1, x ₃=4.6 g l^–1) was also carried out and the results confirmed the results of the factorial design and subsequent quadratic modelling and optimization of AdoMet production which reached 90 mg g^–1 cell dry wt.