Non‐enzymatic aqueous peroxyoxalate chemiluminescence immune detection using a CCD camera and a CMOS device

A new method for non‐enzymatic aqueous peroxyoxalate chemiluminescence (POCL) biomolecular detection using imaging chip‐based devices has been developed. A water‐soluble amide of oxalic acid was synthesized and used in the investigation and characterization of POCL immunodetection in an aqueous environment. Six fluorescent dyes commonly used in biological detection were tested, and the intensity of light generated from the aqueous POCL reactions was characterized in the liquid phase. Direct detection sensitivity comparisons between a standard fluorescent method and this POCL method were performed in both liquid and solid phases. Results showed that detection sensitivity using the POCL method is comparable to that of the fluorescent method. POCL biomolecular detection on a nitrocellulose membrane was also investigated using a charge‐coupled device (CCD) camera. Again, POCL detection sensitivity proved to be comparable to that using the fluorescent detection method. In an application of aqueous POCL biomolecular detection, Staphylococcus aureus enterotoxin B (SEB) and its antibody were used to demonstrate immuno‐ and affinity detection. For further applications, such as DNA and protein arrays, simultaneous detection of biomolecules labelled with different fluorescent labels was investigated, using a complementary metal oxide semiconductor (CMOS) colour imaging chip. Copyright © 2008 John Wiley & Sons, Ltd.     

On‐site genetic analysis for species identification using lab‐on‐a‐chip

This paper presents a microfluidic device capable of performing genetic analysis on dung samples to identify White Rhinoceros (Ceratotherium simum). The development of a microfluidic device, which can be used in the field, offers a portable and cost‐effective solution for DNA analysis and species identification to aid conservation efforts. Optimization of the DNA extraction processes produced equivalent yields compared to conventional kit‐based methods within just 5 minutes. The use of a color‐changing loop‐mediated isothermal amplification reaction for simultaneous detection of the cytochrome B sequence of C. simum enabled positive results to be obtained within as little as 30 minutes. Field testing was performed at Knowsley Safari to demonstrate real‐world applicability of the microfluidic device for testing of biological samples.     

Hydrogel‐based three‐dimensional cell culture for organ‐on‐a‐chip applications

Recent studies have reported that three‐dimensionally cultured cells have more physiologically relevant functions than two‐dimensionally cultured cells. Cells are three‐dimensionally surrounded by the extracellular matrix (ECM) in complex in vivo microenvironments and interact with the ECM and neighboring cells. Therefore, replicating the ECM environment is key to the successful cell culture models. Various natural and synthetic hydrogels have been used to mimic ECM environments based on their physical, chemical, and biological characteristics, such as biocompatibility, biodegradability, and biochemical functional groups. Because of these characteristics, hydrogels have been combined with microtechnologies and used in organ‐on‐a‐chip applications to more closely recapitulate the in vivo microenvironment. Therefore, appropriate hydrogels should be selected depending on the cell types and applications. The porosity of the selected hydrogel should be controlled to facilitate the movement of nutrients and oxygen. In this review, we describe various types of hydrogels, external stimulation‐based gelation of hydrogels, and control of their porosity. Then, we introduce applications of hydrogels for organ‐on‐a‐chip. Last, we also discuss the challenges of hydrogel‐based three‐dimensional cell culture techniques and propose future directions. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:580–589, 2017     

Quercetin and hydroxytyrosol as modulators of hepatic steatosis: A NAFLD‐on‐a‐chip study

Organs‐on‐chip (OoCs) are catching on as a promising and valuable alternative to animal models, in line with the 3Rs initiative. OoCs enable the creation of three‐dimensional (3D) tissue microenvironments with physiological and pathological relevance at unparalleled precision and complexity, offering new opportunities to model human diseases and to test the potential therapeutic effect of drugs, while overcoming the limited predictive accuracy of conventional 2D culture systems. Here, we present a liver‐on‐a‐chip model to investigate the effects of two naturally occurring polyphenols, namely quercetin and hydroxytyrosol, on nonalcoholic fatty liver disease (NAFLD) using a high‐content analysis readout methodology. NAFLD is currently the most common form of chronic liver disease; however, its complex pathogenesis is still far from being elucidated, and no definitive treatment has been established so far. In our experiments, we observed that both polyphenols seem to restrain the progression of the free fatty acid‐induced hepatocellular steatosis, showing a cytoprotective effect due to their antioxidant and lipid‐lowering properties. In conclusion, the findings of the present work could guide novel strategies to contrast the onset and progression of NAFLD.     

High‐throughput method for the analysis of venlafaxine in pharmaceutical formulations and biological fluids,using a tris(2,2′‐bipyridyl) ruthenium(II)–peroxydisulphate chemiluminescence system in a two‐chip device

A simple, rapid and sensitive chemiluminescent (CL) method for the assay of venlafaxine (VEN) in pharmaceutical formulations and serum samples by a two‐chip device is proposed. The method is based on the reaction of this drug with a tris(2,2′‐bipyridyl) ruthenium(II)–peroxydisulphate CL system. The optimum chemical conditions for CL emission were investigated. The calibration graph was linear for the concentration range 0.02–8.0 µg/mL. The detection and quantification limits were found to be 0.006 and 0.018 µg/mL, respectively, while the relative standard deviation (RSD) was <2.0%. The present CL procedure was applied to the determination of VEN in pharmaceutical formulations and serum samples; the recovery levels were in the range 96.5–101.2%. The results suggest that the method is unaffected by the presence of common formulation excipients found in these samples. Copyright © 2012 John Wiley & Sons, Ltd.     

Studies on the chemiexcitation step in peroxyoxalate chemiluminescence using steroid‐substituted activators

The peroxyoxalate reaction is utilized in a wide variety of analytical applications; however, its mechanism is still not very well understood, especially with respect to the excitation step, where the ‘chemical energy’ is transformed into ‘excitation energy’. This base‐catalysed reaction of activated oxalic phenyl esters with hydrogen peroxide in the presence of highly fluorescent aromatic hydrocarbons with low oxidation potentials is the only known chemiluminescence system for which exists experimental evidence for the occurrence of the intermolecular chemically initiated electron exchange luminescence (CIEEL) mechanism of proven high efficiency for excited state formation. We report here the singlet quantum yields and relative rate constants of the excitation step (k_CAT/k_D), obtained in the peroxyoxalate reaction, utilizing steroid‐substituted oxazolinylidenes as activators. In agreement with the CIEEL mechanism, a linear correlation of ln(k_CAT/k_D) with the oxidation potential of the activators is obtained, and the singlet quantum yields can be rationalized in terms of the free energy balance of the back electron transfer, leading to the formation of the activator's excited state. Thus, these results contribute to the experimental validation of the widely employed, thus still controversial, CIEEL mechanism. Copyright © 2002 John Wiley & Sons, Ltd.     

Disposable luciferase‐based microfluidic chip for rapid assay of water pollution

In the present study, we demonstrate the use of a disposable luciferase‐based microfluidic bioassay chip for environmental monitoring and methods for fabrication. The designed microfluidic system includes a chamber with immobilized enzymes of bioluminescent bacteria Photobacterium leiognathi and Vibrio fischeri and their substrates, which dissolve after the introduction of the water sample and thus activate bioluminescent reactions. Limits of detection for copper (II) sulfate, 1,3‐dihydroxybenzene and 1,4‐benzoquinone for the proposed microfluidic biosensor measured 3 μM, 15 mM, and 2 μM respectively, and these values are higher or close to the level of conventional environmental biosensors based on lyophilized bacteria. Approaches for entrapment of enzymes on poly(methyl methacrylate) (PMMA) plates using a gelatin scaffold and solvent bonding of PMMA chip plates under room temperature were suggested. The proposed microfluidic system may be used with some available luminometers and future portable luminescence readers.     

Development of a novel capillary electrophoresis chemiluminescence system for amino acid analysis

In the present study, a novel peroxyoxalate CE–CL system was developed to achieve high signal stability and sensitivity based on a design of a new interface including a new mixing mode and a new grounding electrode mode. Amino acids fluorescently tagged with dansyl chloride and naphthalene‐2,3‐dicarboxaldehyde(NDA) were used for the study. Experiment results show this new system is quite effective to separate and detect amine acid with high stability and resolute. The detection limits were 1.1 nmol/L for dansyl‐leucine (Leu) and 2.0 nmol/L for dansyl‐aspartic acid (Asp). The relative standard deviations of peak height and migration time were in the ranges of 2.3–3.8% and 1.2–1.5%, respectively. Copyright © 2008 John Wiley & Sons, Ltd.     

Response surface optimized peroxyoxalate chemiluminescence of octahydro‐Schiff base derivative as new luminophor and study of the quenching effect of some cations,amino acids and cholesterol

We report the first detailed study of the characteristics of an octahydro‐Schiff base derivative as a new luminophor in the peroxyoxalate chemiluminescence (POCL) system. The effect of reagents on this new POCL system was investigated. In addition, the response surface methodology was used for evaluating the relative significance of variables in this POCL system, establishing models and determining optimal conditions. The quenching effect of some cations and compounds such as Cu²⁺, Fe³⁺, Hg²⁺, imidazole, histidine and cholesterol on an optimized POCL reaction were studied. The dynamic ranges were up to approximaterly 100 and 175 × 10^?6 M for Cu²⁺ and cholesterol respectively. The detection limits were 3.3 × 10^?6 m and 2.58 × 10^?6 m for Cu²⁺ and histidine, respectively. In all cases the relative standard deviations were 4–5% (n = 4). Copyright © 2014 John Wiley & Sons, Ltd.     

Microfluidics and photonics for Bio‐System‐on‐a‐Chip: A review of advancements in technology towards a microfluidic flow cytometry chip

Microfluidics and photonics come together to form a field commonly referred to as ‘optofluidics’. Flow cytometry provides the field with a technology base from which both microfluidic and photonic components be developed and integrated into a useful device. This article reviews some of the more recent developments to familiarize a reader with the current state of the technologies and also highlights the requirements of the device and how researchers are working to meet these needs. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Determination of vitamin B6 using an optimized novel TCPO–indolizine–H2O2 chemiluminescence system

Indolizine derivatives are of great interest as fluorescent emitters for peroxyoxalate chemiluminescence. The reaction of peroxyoxalates such as bis‐(2,4,6‐trichlorophenyl) oxalate (TCPO) with H₂O₂ can transfer energy to fluorescer via the formation of dioxetanedione intermediate. Four indolizine derivatives were used as a novel fluorescer in the chemiluminescence (CL) systems in this study. The relationship between CL intensity and the concentration of fluorescer, peroxyoxalate, sodium salicylate and hydrogen peroxide was investigated. Optimum conditions were obtained for four fluorescers and it was found that the indolizine can be used as an efficient green fluorescence emitter. Vitamin B₆ induces a sharp decrease in the CL intensity of the TCPO–hydrogen peroxide–sodium salicylate system. A simple, rapid and sensitive CL method for the determination of vitamin B₆ has been developed. The results showed a linear relationship between vitamin B₆ concentration and peroxyoxalate CL intensity in the range 7.0 × 10⁻⁸–1.0 × 10⁻⁴. A detection limit of 2.3 × 10⁻⁸ M and relative standard deviation (RSD) of < 4.5% were obtained. Copyright © 2014 John Wiley & Sons, Ltd.     

Chemiluminescence determination of moxifloxacin in pharmaceutical and biological samples based on its enhancing effect of the luminol–ferricyanide system using a microfluidic chip

A sensitive determination of a synthetic fluoroquinolone antibacterial agent, moxifloxacin (MOX), by an enhanced chemiluminescence (CL) method using a microfluidic chip is described. The microfluidic chip was fabricated by a soft‐lithographic procedure using polydimethyl siloxane (PDMS). The fabricated PDMS microfluidic chip had three‐inlet microchannels for introducing the sample, chemiluminescent reagent and oxidant, and a 500 µm wide, 250 µm deep and 82 mm long microchannel. An enhanced CL system, luminol–ferricyanide, was adopted to analyze the MOX concentration in a sample solution. CL light was emitted continuously after mixing luminol and ferricyanide in the presence of MOX on the PDMS microfluidic chip. The amount of MOX in the luminol–ferricyanide system influenced the intensity of the CL light. The linear range of MOX concentration was 0.14–55.0 ng/mL with a correlation coefficient of 0.9992. The limit of detection (LOD) and limit of quantification (LOQ) were 0.06 and 0.2 ng/mL respectively. The presented method afforded good reproducibility, with a relative standard deviation (RSD) of 1.05% for 10 ng/mL of MOX, and has been successfully applied for the determination of MOX in pharmaceutical and biological samples. Copyright © 2013 John Wiley & Sons, Ltd.     

A new electrochemical assay method for gene expression using HeLa cells with a secreted alkaline phosphatase (SEAP) reporter system

A new electrochemical assay for the detection of secreted alkaline phosphatase (SEAP) from transfectant HeLa cells is proposed using a microarray device and scanning electrochemical microscopy (SECM). The assay consists of two steps: the first is the incubation of a transfected cell in a microarray culture device covered with a substrate modified with anti-SEAP under physiological conditions without any additives. The array device consists of a 4 × 4 array of microwells having a size of 100 μm × 100 μm (diameter × depth). The second step is SECM measurement of secreted SEAP at the antibody-immobilized substrate. This assay ensures accuracy and intactness because the undesired influence of endogeneous ALP is eliminated and the transfected cells are incubated in a culture device under suitable conditions. We successfully detected the expression of SEAP from intact cells at the single-cell level using this assay. The system is useful as a cell-based gene-expression assay.     

Chemiluminescence of off‐line and on‐line gold nanoparticle‐catalyzed luminol system in the presence of flavonoid

It was found that flavonoids could remarkably inhibit the chemiluminescence (CL) intensity of an off‐line gold nanoparticle (AuNP)‐catalyzed luminol–H₂O₂ CL system. By contrast, flavonoids enhanced the CL intensity of an on‐line AuNP‐catalyzed luminol–H₂O₂ CL system. In the off‐line system, the AuNPs were prepared beforehand, whereas in the on‐line system, AuNPs were produced by on‐line mixing of luminol prepared in a buffer solution of NaHCO₃ ? Na₂CO₃ and HAuCl₄ with no need for the preliminary preparation of AuNPs. The on‐line system had prominent advantages over the off‐line system, namely a lowering of the background noise and improvements in the stability of the CL system. The results show that differences in the signal suppression effect of flavonoids on the off‐line AuNP‐catalyzed CL system are influenced by the combined action of a free radical scavenging effect and occupy‐sites function; the latter was proved to be predominant using controlled experiments. Enhancement of the on‐line system was ascribed to the presence of flavonoids promoting the on‐line formation of AuNPs, which better catalyzed the luminol–H₂O₂ CL reaction, and the enhancement activity of the six flavonoids increased with the increase in reducibility. This work broadens the scope of practical applications of an AuNP‐catalyzed CL system.     

Levitation and movement of human tumor cells using a printed circuit board device based on software-controlled dielectrophoresis

In this study we describe an original, efficient, and innovative printed circuit board (PCB) device able to generate dielectrophoresis-based, software-controlled cages that can be moved to any place inside a microchamber. Depending on their dielectrophoretic properties, eukaryotic cells can be "entrapped" in cages and moved under software control. The main conclusion gathered from the experimental data reported is that the PCB device based on dielectrophoresis permits levitation and movement of different tumor cells at different dielectrophoresis conditions. The results presented herein are therefore the basis for experiments aimed at forced interactions or separation of eukaryotic cells using "lab-on-a-chip." In fact, because many cages can be controlled at the same time, and two or more cages can be forced to share the same or a different location, it is possible, in principle, either to bring in contact cells of a differing histotype or to separate them.     

Photoinduced oxidation of a tris(2,2'‐bipyridyl)ruthenium(II)–peroxodisulfate chemiluminescence system for the analysis of mebeverine HCl pharmaceutical formulations and biological fluids using a two‐chip device

A new method for the analysis of mebeverine hydrochloride (MEB) has been developed using a two‐chip device. The method is highly selective, sensitive, rapid and consumes minute amount of reagents. The developed method is free of interference from the degradation products of MEB and from common ingredients present in pharmaceutical formulations. The limit of detection was 0.043 µg/mL, and the limit of quantification was 0.138 µg/mL. The short analysis time per sample (20 s) allowed a large number of analyses to be performed within a very short time. Various samples were analyzed, including two different pharmaceutical formulations and a uniformity of content analysis for 20 tablets from a known batch and two biological samples at different concentrations. In addition, the method was compared with a validated high‐performance liquid chromatography (HPLC) method and the results clearly indicated the suitability of the developed method for routine analyses. A new mechanism for the tris(2,2'‐bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺)‐peroxodisulfate (S₂O₈^2?) chemiluminescence (CL) system has also been proposed. The mechanism is based on photoinduced oxidation of Ru(bpy)₃²⁺ to Ru(bpy)₃³⁺ via the formation of Ru(bpy)₃²⁺* upon irradiation with visible light. S₂O₈^2? then oxidizes Ru(bpy)₃²⁺* to Ru(bpy)₃³⁺ and the analyte subsequently reduces the resultant Ru(bpy)₃³⁺ to Ru(bpy)₃²⁺*, which then produces the CL signal. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of naphazoline hydrochloride in biological and pharmaceutical samples by a quantum dot‐assisted chemiluminescence system using response‐surface methodology

A simple and highly sensitive chemiluminescence (CL) method is reported for the determination of naphazoline hydrochloride (NH). It was found that the weak CL from the reaction of luminol and KIO₄ in an alkaline medium could be highly amplified by cysteine‐capped cadmium telluride quantum dots (QDs) and the enhanced CL was effectively quenched by NH and this finding was utilized as a basis for the determination of NH. The QDs were synthesized in aqueous medium and characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and UV‐vis and photoluminescence spectroscopy. A possible mechanism was proposed for the CL system based on radical identification experiments, along with CL spectrum of the system. The experimental parameters were optimized by the reliable response surface methodology (RSM). Under the optimized experimental conditions, the proposed method allowed the determination of NH over the range of 5.0 × 10^‐10–2.0 × 10^‐7 mol/L (r² = 0.9993, n = 10). The precision (RSD%) of the method, obtained from five replicate determinations of 2.0 and 150 nmol/L NH, was found to be 1.0% and 1.3%, respectively. The method was successfully applied to the determination of NH in pharmaceutical formulations and human urine and serum samples with results corroborated with the aid of those obtained from a standard method. Copyright © 2014 John Wiley & Sons, Ltd.     

Sensitive determination of gentiopicroside in medicine and bio‐fluids using luminol‐myoglobin chemiluminescence combined with flow injection technique

A novel chemiluminescence method for the determination of gentiopicroside is presented, which was based on the inhibitory effect of gentiopicroside on the chemiluminescence reaction between luminol and myoglobin in a flow‐injection system. The decrement of chemiluminescence intensity was linear with the logarithm of gentiopicroside concentration over the range from 10.0 pg mL^?1 to 500.0 ng mL^?1 (r² = 0.9992), with a detection limit of 3.0 pg mL^?1 (3σ). At a flow rate of 2.0 mL min^?1, a complete analytical process could be performed within 0.5 min, including sampling and washing, with a relative standard deviation of less than 3.0% (n = 5). The proposed procedure was applied successfully in the determination of gentiopicroside in pharmaceutical preparations, human urine and serum without any pretreatment procedure. The possible mechanism of the reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.