Solution phase synthesis of Saccharomyces cerevisiae a-mating factor and its analogs

The solution phase synthesis of the Saccharomyces cerevisiae a-mating factor and nonfarnesylated and nonmethylated a-factor analogs are reported. The a-factor, a lipopeptide with the sequence Tyr-Ile-Ile-Lys-Gly-Val-Phe-Trp-Asp-Pro-Ala-Cys(S-Farnesyl)OCH3 was synthesized by the condensation of the amine terminal protected decapeptide with the carboxyl terminal farnesylated dipeptide using benzotriazol-l-yloxy-tris-(dimethylamino)-phosphonium hexafluorophosphate (BOP reagent) as the coupling agent. The synthesis of the decapeptide involved 5 + 5 fragment coupling with the BOP reagent and the successful application of 9-fluorenylmethyl ester(OFm) and 9-fluorenylmethoxycarbonyl(Fmoc) groups for the protection of Asp and Lys side chains and Tyr alpha-amine and of phenacyl esters (OPa) for alpha-carboxyl protection. The OFm and Fmoc groups tolerated repeated couplings and were completely stable to zinc powder in acetic acid, a condition under which the OPa group was removed. The synthesis of the nonfarnesylated alpha-factor was accomplished by the coupling of the decapeptide with tetrapeptide (Ala-CysOCH3)2 followed by the deprotection of the OFm and Fmoc groups with piperidine and the cleavage of the disulfide bond with zinc powder in acetic acid. The nonmethylated a-factor was prepared by 10 + 2 fragment coupling using OFm protection of the dipeptide carboxyl group followed by removal of all protecting groups with piperidine. Attempts to saponify a-factor were not successful. The synthetic nonfarnesylated and nonmethylated a-mating pheromones were 100-1000 times less active than the a-factor, indicating that although the methyl ester and the farnesyl group are not essential for biological activity, they are necessary for high potency.     

Application of 2-chlorotrityl resin in solid phase synthesis of (Leu15)-gastrin I and unsulfated cholecystokinin octapeptide. Selective O-deprotection of tyrosine.

The carboxyl terminal dipeptide amide, Fmoc-Asp-Phe-NH2, of gastrin and cholecystokinin (CCK) has been attached in high yield through its free side chain carboxyl group to the acid labile 2-chlorotrityl resin. The obtained peptide resin ester has been applied in the solid phase synthesis of partially protected (Leu15)-gastrin I utilising Fmoc-amino acids. Quantitative cleavage of this peptide from resin, with the t-butyl type side chain protection intact is achieved using mixtures of acetic acid/trifluoroethanol/dichloromethane. Under the same conditions complete detritylation of the tyrosine phenoxy function occurs simultaneously. Thus, the solid-phase synthesis of peptides selectively deprotected at the side chain of tyrosine is rendered possible by the use of 2-chlorotrityl resin and Fmoc-Tyr(Trt)-OH. The efficiency of this approach has been proved by the subsequent high-yield synthesis of three model peptides and the CCK-octapeptide.     

Solution‐phase submonomer diversification of aza‐dipeptide building blocks and their application in aza‐peptide and aza‐DKP synthesis

Aza‐peptides have been used as tools for studying SARs in programs aimed at drug discovery and chemical biology. Protected aza‐dipeptides were synthesized by a solution‐phase submonomer approach featuring alkylation of N‐terminal benzophenone semicarbazone aza‐Gly‐Xaa dipeptides using different alkyl halides in the presence of potassium tert‐butoxide as base. Benzophenone protected aza‐dipeptide tert‐butyl ester 31c was selectively deprotected at the C‐terminal ester or N‐terminal hydrazone to afford, respectively, aza‐dipeptide acid and amine building blocks 36c and 40c, which were introduced into longer aza‐peptides. Alternatively, removal of the benzophenone semicarbazone protection from aza‐dipeptide methyl esters 29a–c led to intramolecular cyclization to produce aza‐DKPs 39a–c. In light of the importance of aza‐peptides and DKPs as therapeutic agents and probes of biological processes, this diversity‐oriented solution‐phase approach may provide useful tools for studying peptide science. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Tachyphylactic properties of angiotensin II analogs with bulky and hydrophobic substituents at the N-terminus.

Tachyphylaxis, defined as the acute loss of response of some smooth muscles upon repeated stimulations with angiotensin II (Ang II), has been shown to be dependent mainly on the N-terminal region of the ligand. To further study the structural requirements for the induction of tachyphylaxis we have synthesized Ang II analogs containing the bulky and very lipophilic substituents 9-fluorenylmethyloxycarbonyl (Fmoc) and 9-fluorenylmethyl ester (OFm) at the alpha-amino (Nalpha-Fmoc-Ang II) or the beta-carboxyl ([Asp(OFm)1]-Ang II) groups of the Asp1 residue, respectively. In binding assays with Chinese hamster ovary cells transfected with the AT1 Ang II receptor, Nalpha-Fmoc-Ang II bound with high affinity, whereas [Asp(OFm)1]-Ang II showed lower affinity. In biological assays, these two analogs were full agonists and showed 30 and 3%, respectively, of the Ang II potency in contracting the guinea-pig ileum smooth muscle. The two analogs induced tachyphylaxis, in spite of the lack of a free amino group in Nalpha-Fmoc-Ang II. Thus, analogs with Fmoc- or OFm-type groups coupled to the Asp1 residue, whether at the amino or carboxyl functions, induce tachyphylaxis through an unreported mechanism. Based in these findings and those available from the literature, an alternate molecular interaction mode between Ang II N-terminal portion and the AT1 receptor is proposed to explain the tachyphylactic phenomenon.     

Synthesis of beta- and gamma-fluorenylmethyl esters of respectively N alpha-Boc-L-aspartic acid and N alpha-Boc-L-glutamic acid

The orthogonal synthesis of N alpha-Boc-L-aspartic acid-gamma-fluorenylmethyl ester and N alpha-Boc-L-glutamic acid-delta-fluorenylmethyl ester is reported. This is a four-step synthesis that relies on the selective esterification of the side-chain carboxyl groups on N alpha-CBZ-L-aspartic acid and N alpha-CBZ-L-glutamic acid. Such selectivity is accomplished by initially protecting the alpha-carboxyl group through the formation of the corresponding 5-oxo-4-oxazolidinone ring. Following side-chain esterification, the alpha-carboxyl and alpha-amino groups are deprotected with acidolysis. Finally, the alpha-amino group is reprotected with the t-butyl-oxycarbonyl (Boc) group. Thus aspartic acid and glutamic acid have their side-chain carboxyl groups protected with the base-labile fluorenylmethyl ester (OFm) and their alpha-amino groups protected with the acid-labile Boc group. These residues, when used in conjunction with N alpha-Boc-N epsilon-Fmoc-L-lysine, are important in the formation of side-chain to side-chain cyclizations, via an amide bridge, during solid-phase peptide synthesis.     

The synthesis of oligomers of oxetane-based dipeptide isosteres derived from L-rhamnose or D-xylose.

Routes to oligomers (dimers, tetramers, hexamers) of five oxetane-based dipeptide isosteres have been established. Methyl 2,4-anhydro-5-azido-5-deoxy-L-rhamnonate 'monomer' led, by coupling the corresponding carboxylic acid and amine, to a 'dimer'. Reverse-aldol ring-opening occurred on attempted saponification of the dimer, so all further oligomerization was performed using TBDMS C-3 hydroxyl protection. The silyl protected L-rhamnonate monomer led in turn to the dimer (via the monomer acid and amine), the tetramer (via the dimer acid and amine) and finally the hexamer (via the tetramer acid and dimer amine). In each case the acids were obtained through saponification of the respective methyl esters and the amines were obtained by hydrogenation of the azides; coupling was TBTU-mediated. Essentially the same strategy was employed on equivalent D-lyxonate, 6-deoxy-L-altronate, 6-deoxy-D-gulonate and D-fuconate dipeptide isosteres to give the respective dimers, tetramers and hexamers.     

Use of the excluded protecting group (EPG) method for peptide synthesis.

The excluded protecting group (EPG) method has been used for the solution synthesis of several peptides including Merrifield's Model Tetrapeptide, linear antamanide and an analogue of magainin-1, [Ala(19), Asn(22)]magainin-1. In the approach reported, the C-terminal amino acid is esterified to the 2-position of cholestane as the [2s,3s]iodohydrin ester and the penultimate amino acid added to the aminoacyl-steroid as the Fmoc-pentafluorophenyl-ester. The Fmoc group is removed with Et(2)NH/DMF ( approximately 15% v/v) and, after evaporation to approximately 10 mL, the solution chromatographed on Sephadex LH-20 in DMF. The dipeptidyl-steroid elutes as the free amine well separated from other reaction mixture components. Fractions containing the dipeptide, as determined by counting and TLC, are pooled and reacted with the next Fmoc-amino acid-pentafluorophenyl ester in the sequence. Repetition of the deprotection/purification/reaction cycle yields the fully protected peptide.On completion of the synthesis, the cholestane iodohydrin ester is selectively removed by treatment with Zn degrees /AcOH to yield the peptide with intact alpha-amino and side chain protecting groups. Global deprotection is achieved with HF. All intermediates from the syntheses reported were characterized. The magainin analogue was shown to have full biologic activity. The Fmoc iodohydrin esters of 16 of the 20 proteogenic amino acids have been prepared and characterized for use as the C-terminal amino acids in other EPG syntheses.     

Identification of carboxylic acid residues in glucoamylase G2 from Aspergillus niger that participate in catalysis and substrate binding

Functionally important carboxyl groups in glucoamylase G2 from Aspergillus niger were identified using a differential labelling approach which involved modification of the acarbose-inhibited enzyme with 1-ethyl-3-(4-azonia-4,4-dimethylpentyl)carbodiimide (EAC) and inactivation by [3H]EAC following removal of acarbose. Subsequent sequence localization of the substituted acidic residues was facilitated by specific phenylthiohydantoins. The acid cluster Asp176, Glu179 and Glu180 reacted exclusively with [3H]EAC, while Asp112, Asp153, Glu259 and Glu389 had incorporated both [3H]EAC and EAC. It is conceivable that one or two of the [3H]EAC-labelled side chains act in catalysis while the other fully protected residue(s) participates in substrate binding probably together with the partially protected ones. Twelve carboxyl groups that reacted with EAC in the enzyme-acarbose complex were also identified. Asp176, Glu179 and Glu180 are all invariant in fungal glucoamylases. Glu180 was tentatively identified as a catalytic group on the basis of sequence alignments to catalytic regions in isomaltase and alpha-amylase. The partially radiolabelled Asp112 corresponds in Taka-amylase A to Tyr75 situated in a substrate binding loop at a distance from the site of cleavage. A possible correlation between carbodiimide modification of an essential carboxyl group and its role in the glucoamylase catalysis is discussed.     

Synthesis of cyclic herpes simplex virus peptides containing 281–284 epitope of glycoprotein D‐1 in endo‐ or exo‐position

We have prepared two types of cyclopeptides containing the ²⁸¹DPVG²⁸⁴ sequence from the 276–284 region of glycoprotein gD‐1 of the Herpes simplex virus (HSV). The syntheses were performed by solid phase methodology using MBHA or BHA resin and orthogonal protection schemes. Head‐to‐side‐chain cyclization included the N‐terminal part of the epitope, while side‐chain‐to‐side‐chain lactam bridge formation resulted in a peptide containing a C‐terminal cycle. Peptides elongated by Cys at the N‐terminal of the sequence were also prepared. Boc chemistry using Fmoc and OFm orthogonal protection was applied for on‐resin cyclization. Based on the orthogonality of Bzl and cHex esters under a 1 m TMSOTf‐thioanisole/TFA cleavage condition, a new approach for the cyclization on BHA‐resin has also been developed. Preliminary studies on solution conformation of the cyclic peptides by CD spectroscopy indicated the importance of the location and the size of the cycle within the epitope sequence. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

Ion-spray tandem mass spectrometry in peptide synthesis: structural characterization of minor by-products in the synthesis of ACP(65-74).

Ion-spray triple quadrupole mass spectrometry was used to investigate the products from the solid phase synthesis of the decapeptide (H)-Val-Gln-Ala-Ala-Ile-Asp-Tyr-Ile-Asn-Gly-(OH) [acyl carrier protein(65-74)]. The target sequence was assembled in stepwise fashion from the C-terminal using Boc chemistry on a Bly-OCH2-Pam-copoly(styrenedivinylbenzene) resin. The product was deprotected and cleaved from the resin by treatment with HF/p-cresol for 1 h at 0 degrees C. The crude product was analyzed by reverse-phase HPLC and contained a single major peptide component, one significant minor (late-eluting) component and several trace-level peptide by-products. The components were separated by HPLC and the fractions directly analyzed by mass spectrometry and tandem mass spectrometry. The major product was confirmed as the desired ACP(65-74). The significant minor component was apparently from incomplete deprotection of Asp70, an artifact of this particular experiment. The trace by-products were found to arise from succinimide formation at Asp70, succinimide formation at Asn73, acylation of the Tyr71 side chain phenolic hydroxyl leading to a branched heptadecapeptide, and tert-butylation of the decapeptide. The possible origins of these by-products are discussed in light of known peptide chemistry. Also notable was the absence, to very low detection levels, of by-products frequently reported to occur in peptide synthesis, illustrating the high degree of refinement and the accuracy of currently used synthetic methods.     

Novel carboranyl amino acids and peptides: reagents for antibody modification and subsequent neutron-capture studies.

A new alpha-amino acid derivative incorporating the 1,2-dicarba-closo- dodecarborane(12) cage, namely 5-(2-methyl-1,2-dicarba-closo-dodecarborane(12)-1-yl)- 2-aminopentanoic acid (2), was synthesized by the alkylation of the benzophenone Schiff's base of glycine methyl ester with 3-(2-methyl-1,2-dicarba-closo-dodecaborane(12)-1-yl)pr opyl iodide (8). This amino acid was employed in the synthesis of peptide derivatives such as 19-21 using solid-phase Merrifield methods. Dipeptide 19 was converted to a water-soluble ionic derivative by the pyrrolidine-mediated carborane cage degradation reaction followed by cation exchange to afford sodium salt 22. Dansylation of 22 with dansyl chloride yielded fluorescence-labeled dipeptide 23. Undecapeptide 21 was dansylated while still anchored to the Merrifield resin. Following its cleavage from the resin with hydrogen fluoride, product 25 was acetylated to block the free amino group on the lysine residue and then converted to water-soluble derivative 27. Trial conjugations of dipeptide 23 and undecapeptide 27 to T84.66, an anti-CEA antibody, were carried out by means of carboxyl activation with N-hydroxysulfosuccinimide and N,N-diisopropylcarbodiimide. Studies of the chemical syntheses of these and other peptide derivatives and the conjugation of 23 and 27 to the antibody are described.     

Preparation of N-tBoc L-glutathione dimethyl and di-tert-butyl esters: versatile synthetic building blocks

The title l-glutathione derivatives, containing acid- and base-labile esters, respectively, were obtained in good overall yields. N-(t)Boc l-glutathione dimethyl ester was prepared via Fischer esterification of l-glutathione disulfide (GSSG) using HCl in dry methanol, protection of the amine with (t)Boc(2)O, and tributylphosphine cleavage of the disulfide in wet isopropanol. Alternatively, Fischer esterification and (t)Boc-protection of l-glutathione (GSH) also furnished N-(t)Boc glutathione dimethyl ester accompanied by a small amount of S-(t)Boc that was removed chromatographically. The di-tert-butyl ester was obtained by S-palmitoylation of GSH in TFA as solvent, N-(t)Boc-protection, esterification using (t)BuOH mediated by diisopropylcarbodiimide/copper(I) chloride, and saponification of the thioester. These l-glutathione derivatives are versatile synthetic building blocks for the preparation of S-glutathione adducts.     

Synthesis and 13C-NMR spectra of the N-terminal decapeptide sequence of human lymphoblast interferon

The N-terminal sequence 1-10 of interferon HuIFN-alpha(Ly) from human lymphoblasts Ser-Asp-Leu-Pro-Gln-Thr-His-Ser-Leu-Gly (LIF[1-10]) was synthesized by the Merrifield method. N-tert-Butyloxycarbonylglycin was esterified via its cesium salt with a chloro-methylated polystyrene-1% divinylbenzene support yielding a loading of 0.3 mmol/g. Double couplings, each with a five-fold excess of N-protected amino acid, were performed with N,N'-dicyclohexylcarbodiimide and 1-hydroxybenzotriazole, followed by an acetylation step. N-tert-Butyloxycarbonyl-L-amino acids with O-benzyl protection for serine, threonine, and Nim-2,4-dinitrophenyl protection for histidine, and N-fluorenylmethyloxycarbonylaspartic acid beta-tert-butyl ester were used. N-tert-Butyloxycarbonyl-glutamine was coupled as 4-nitrophenyl ester in the presence of 1-hydroxybenzotriazole. The butyloxycarbonyl groups of the residues 3 to 10 were removed with trifluoroacetic acid in dichloromethane; the 9-fluorenylmethyloxycarbonyl group was split off with diethylamine. After quantitative hydrazinolysis in dimethylformamide, chromatography on Sephadex LH-20 with methanol and reversed-phase chromatography on silica gel RP-8 with methanol/water 9:1, the decapeptide hydrazide Boc-Ser(Bzl)-Asp(But)-Leu-Pro-Gln-Thr(Bzl)-His-Ser(Bzl)-Leu-Gly-NH-HN2 was isolated in pure state. The partially protected decapeptide was characterized by 13C-NMR spectroscopy, analysed, and linked with poly(L-lysine) (molecular mass 37 300) via its azide and also using m-xylylene diisocyanate. After a deprotection step the polylysine-LIF[1-10] antigens were dialyzed and lyophilized. Furthermore the free decapeptide LIF[1-10] was split-off from the resin using HBr/CF3CO2H, followed by mercaptoethanol treatment. After purification on Sephadex G-15 with 0.1 M acetic acid and on the reversed-phase silicagel RP-8 with methanol/water 9:1 water soluble LIF-[1-10] was obtained in pure state as shown by thin-layer-chromatography, electrophoreses amino acid analysis and 13C-NMR spectroscopy.     

Total solid-phase synthesis of bombesin analogs with different functional groups at the C-terminus.

Five bombesin analogs with different functional groups at the C-terminus were synthesized using a solid-phase strategy. The protocols were optimized using 4-(hydroxymethyl)benzoic acid (HMBA) resin to synthesize a common precursor followed by nucleophilic cleavage of the base sensitive peptide ester linkage. The C-terminal modifications included ethylamide, butylamide, methyl ester, propyl ester and hydrazide. Cleavage from the resin was possible with the fully protected or deprotected precursor peptide; however, higher purity of the final products was achieved when cleavage protocols were conducted after side-chain deprotection. The synthesized peptides were analyzed and characterized using reverse phase HPLC and ESI-MS. The peptides were obtained in 13-32% overall recovery, calculated from the coupling efficiency of the first amino acid residue, and in 91-97% purity.     

On the use of N‐dicyclopropylmethyl aspartyl‐glycine synthone for backbone amide protection

To prevent aspartimide formation and related side products in Asp‐Xaa, particularly Asp‐Gly‐containing peptides, usually the 2‐hydroxy‐4‐methoxybenzyl (Hmb) backbone amide protection is applied for peptide synthesis according to the Fmoc‐protocols. In the present study, the usefulness of the recently proposed acid‐labile dicyclopropylmethyl (Dcpm) protectant was analyzed. Despite the significant steric hindrance of this bulky group, N‐terminal H‐(Dcpm)Gly‐peptides are quantitatively acylated by potent acylating agents, and alternatively the dipeptide Fmoc‐Asp(OtBu)‐(Dcpm)Gly‐OH derivative can be used as a building block. In contrast to the Hmb group, Dcpm is inert toward acylations, but is readily removed in the acid deprotection and resin‐cleavage step. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Atomic resolution analysis of the catalytic site of an aspartic proteinase and an unexpected mode of binding by short peptides

The X-ray structures of native endothiapepsin and a complex with a hydroxyethylene transition state analog inhibitor (H261) have been determined at atomic resolution. Unrestrained refinement of the carboxyl groups of the enzyme by using the atomic resolution data indicates that both catalytic aspartates in the native enzyme share a single negative charge equally; that is, in the crystal, one half of the active sites have Asp 32 ionized and the other half have Asp 215 ionized. The electron density map of the native enzyme refined at 0.9 A resolution demonstrates that there is a short peptide (probably Ser-Thr) bound noncovalently in the active site cleft. The N-terminal nitrogen of the dipeptide interacts with the aspartate diad of the enzyme by hydrogen bonds involving the carboxyl of Asp 215 and the catalytic water molecule. This is consistent with classical findings that the aspartic proteinases can be inhibited weakly by short peptides and that these enzymes can catalyze transpeptidation reactions. The dipeptide may originate from autolysis of the N-terminal Ser-Thr sequence of the enzyme during crystallization.     

Differential labeling of the catalytic subunit of cAMP-dependent protein kinase with a water-soluble carbodiimide: identification of carboxyl groups protected by MgATP and inhibitor peptides

The catalytic subunit of cAMP-dependent protein kinase typically phosphorylates protein substrates containing basic amino acids preceding the phosphorylation site. To identify amino acids in the catalytic subunit that might interact with these basic residues in the protein substrate, the enzyme was treated with a water-soluble carbodiimide, 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide (EDC), in the presence of [14C]glycine ethyl ester. Modification of the catalytic subunit in the absence of substrates led to the irreversible, first-order inhibition of activity. Neither MgATP nor a 6-residue inhibitor peptide alone was sufficient to protect the catalytic subunit against inactivation by the carbodiimide. However, the inhibitor peptide and MgATP together completely blocked the inhibitory effects of EDC. Several carboxyl groups in the free catalytic subunit were radiolabeled after the catalytic subunit was modified with EDC and [14C]glycine ethyl ester. After purification and sequencing, these carboxyl groups were identified as Glu 107, Glu 170, Asp 241, Asp 328, Asp 329, Glu 331, Glu 332, and Glu 333. Three of these amino acids, Glu 331, Glu 107, and Asp 241, were labeled regardless of the presence of substrates, while Glu 333 and Asp 329 were modified to a slight extent only in the free catalytic subunit. Glu 170, Asp 328, and Glu 332 were all very reactive in the apoenzyme but fully protected from modification by EDC in the presence of MgATP and an inhibitor peptide.(ABSTRACT TRUNCATED AT 250 WORDS)     

Racemization in the Coupling Reaction,Pro-Val+Pro,with the Activated Ester Methods

The degree of racemization in the several activated ester methods of the peptide synthesis was measured in using the critical racemization test, Pro-Val+Pro, with help of gas chromatography. The results were compared with that in the coupling reaction, Leu-Phe+Val, in which no racemization had been reported in the corresponding reaction conditions by F. Weygand et al., when the activated dipeptide esters had been prepared from Z-Leu+Phe-activated esters. The significantly higher racemization was observed in the methods of N-hydroxypiperidine ester and thiophenyl ester, even when the activated dipeptide esters were prepared from Z-Pro+Val-activated esters. On the other hand, almost no racemization was observed in the N-hydroxysuccinimide ester and p-nitrophenyl ester methods. A great extent of the racemization was detected when the activated dipeptide esters were prepared directly from Z-Pro-Val-OH.     

The aspartimide problem in Fmoc-based SPPS. Part I.

A variety of Asp beta-carboxy protecting groups, Hmb backbone protection and a range of Fmoc cleavage protocols have been employed in syntheses of the model hexapeptide H-VKDGYI-OH to investigate the aspartimide problem in more detail. The extent of formation of aspartimide and aspartimide-related by-products was determined by RP-HPLC. This study included three new Fmoc-Asp-OH derivatives: the beta-(4-pyridyl-diphenylmethyl) and beta-(9-phenyl-fluoren-9-yl) esters and also the orthoester Fmoc-beta-(4-methyl-2,6,7-trioxabicyclo[2.2.2]-oct-1-yl)-alanine. 3-Methylpent-3-yl protection of the Asp side chain resulted in significant improvements with respect to aspartimide formation. Complete suppression was achieved using the combination OtBu side chain protection and Hmb backbone protection for the preceding Gly residue.     

Cyclopropane amino acid ester dipeptide sweeteners

A series of esters of L-aspartyl-1-aminocyclopropane carboxylic acid has been prepared and their sweet tastes determined. The sweetest ester prepared was about 300 times sweeter than sucrose. An attempt to use basic conditions during preparation of the dipeptide allyl ester led to succinimide formation of the aspartyl peptide even though the beta-carboxyl group was protected by a t-butyl ester function. The X-ray structure of the propyl ester (1c) was determined and its conformation is discussed.