Structural analysis of a mutant of the HIV-1 integrase zinc finger domain that forms a single conformation

HIV-1 integrase consists of three functional domains, an N-terminal zinc finger domain, a catalytic core domain and a C-terminal DNA binding domain. NMR analysis of an isolated N-terminal domain (IN(1-55)) has shown that IN(1-55) exists in two conformational states [E and D forms; Cai et al. (1997) Nat. Struct. Biol. 4, 567-577]. The two forms differ in the coordination of the zinc ion by two histidine residues. In the present study, structural analysis of a mutant of IN(1-55), Y15A, by NMR spectroscopy indicated that the mutant protein folds correctly but takes only the E form. Since the Y15A mutation abrogates the HIV-1 infectivity, Y15 might have some important role in the full-length integrase activity during the virus infection cycle. Our results suggest a possible role of Y15 in structural transition between the E and D forms of HIV-1 integrase to allow the optimal tetramerization.     

Cloning and characterization of the CDZFP gene which encodes a putative zinc finger protein.

We report here the cloning and characterization of a novel human cytoplasm-distribution zinc finger protein (CDZFP) gene, isolated from human ovary cDNA library, and mapped to 4p12 by searching the UCSC genomic database. The CDZFP cDNA is 1793 base pairs in length and contains an open reading frame (ORF) encoding 236 amino acids. The CDZFP gene consists of 7 exons and encodes a putative zinc finger protein with a transmembrane region and two zinc finger motifs. Subcellular localization demonstrated that CDZFP protein was located in the cytoplasm when overexpressed in Hela cells and northern blot analysis revealed that CDZFP was ubiquitously expressed in 16 human tissues.     

Structural determinants for HIV-1 integrase inhibition by beta-diketo acids.

Among all the HIV-1 integrase inhibitors, the beta-diketo acids (DKAs) represent a major lead in anti-HIV-1 integrase drug design. These derivatives inhibit the integration reaction in vitro with a strong specificity for the 3'-end joining step. They are also antiviral and inhibit integration in vivo. The aim of the present study has been to investigate the molecular interactions between DKAs and HIV-1 integrase. We have compared 5CITEP with one of the most potent DKAs reported by the Merck group (L-708,906) and found that 5CITEP inhibits 3'-processing at concentrations where L-708,906 is only active on strand transfer. We also report a novel bifunctional DKA derivative that inhibits 3'-processing even more effectively than 5CITEP. The interactions of these inhibitors with the viral DNA donor ends have been studied by performing experiments with oligonucleotides containing defined modifications. We propose that the bifunctional DKA derivative binds to both the acceptor and donor sites of HIV-1 integrase, whereas the monofunctional L-708,906 derivative binds selectively to the acceptor site.     

Isolation and structure of a novel peptide inhibitor of HIV-1 integrase from marine polychaetes

A homogeneous peptide with a mass of 683 Da which inhibits HIV-1 integrase with IC₅₀ 3 × 10^?5 M was separated from aqueous extracts of a marine worm Eunicidae sp. by multistage chromatography purification. The Asp-Leu-Hse-His-Ala-Gln structure was proposed for this peptide according to amino acid analysis, automated amino acid Edman sequences, and TLC with witness homoserine and MS/MS fragmentation. The proposed structure is the first example of a natural peptide containing an amino acid homoserine residue.     

Nucleic acid interactive properties of a peptide corresponding to the N-terminal zinc finger domain of HIV-1 nucleocapsid protein.

An 18-residue peptide (NC-F1) with an amino acid sequence corresponding to the N-terminal zinc finger of human immunodeficiency virus-1 nucleocapsid protein has been shown to bind to nucleic acids by fluorescence and NMR methods. Previously, this peptide has been shown to fold into a defined structure when bound to zinc (Summers et al., 1990). We have used a fluorescent polynucleotide, poly(ethenoadenylic acid), to monitor binding of this peptide to nucleic acids. In the presence of zinc, the peptide had a smaller site size (1.75 nucleotide residues/peptide) than in the absence of the metal ion (2.75). The salt sensitivity of the interaction indicated that two ion pairs are involved in the association of Zn2+ (NC-F1) with polynucleotide, whereas one ion pair is found in the metal-free peptide-nucleic acid complex. Competition experiments with single-stranded DNA (ss DNA) in either the presence or absence of Zn2+ showed that the peptide bound to ss DNA. Using NMR methods, we monitored the binding of a synthetic oligonucleotide, d(TTTGGTTT), to Zn(NC-F1). The hydrophobic residues F2 and I10, which are on the surface of the peptide and have been implicated in viral RNA recognition, were shown to interact with the oligomer. In accord with this observation, analysis of the salt dependence of the polynucleotide-peptide interaction indicates a nonelectrostatic component of about -6 kcal/mol, a value consistent with theoretical estimates of stacking energies of phenylalanine with nucleic acid bases.     

Interfacial peptide inhibitors of HIV-1 integrase activity and dimerization

Peptides derived from the interfacial region of dimeric HIV-1 integrase were evaluated as inhibitors of integrase's 3'-endonuclease activity. Three peptides were found to be moderately potent inhibitors with IC(50) values in the low micromolar range. The mode of inhibition was probed through protein crosslinking experiments. Active interfacial peptides were found to inhibit crosslinking of the dimeric form of integrase. Interfacial peptides that were poor inhibitors had no effect on integrase crosslinking.     

The binding of a glycoprotein 120 V3 loop peptide to HIV-1 neutralizing antibodies. Structural implications

The structural and antigenic properties of a peptide ("CRK") derived from the V3 loop of HIV-1 gp120 protein were studied using NMR and SPR techniques. The sequence of CRK corresponds to the central portion of the V3 loop containing the highly conserved "GPGR" residue sequence. Although the biological significance of this conserved sequence is unknown, the adoption of conserved secondary structure (type II beta-turn) in this region has been proposed. The tendency of CRK (while free or conjugated to protein), to adopt such structure and the influence of such structure upon CRK antigenicity were investigated by NMR and SPR, respectively. Regardless of conjugation, CRK is conformationally averaged in solution but a weak tendency of the CRK "GPGR" residues to adopt a beta-turn conformation was observed after conjugation. The influence of GPGR structure upon CRK antigenicity was investigated by measuring the affinities of two cognate antibodies: "5023A" and "5025A," for CRK, protein-conjugated CRK and gp120 protein. Each antibody bound to all the antigens with nearly the same affinity. From these data, it appears that: (a) antibody binding most likely involves an induced fit of the peptide and (b) the gp120 V3 loop is probably conformationally heterogeneous. Since 5023A and 5025A are HIV-1 neutralizing antibodies, neutralization in these cases appears to be independent of adopted GPGR beta-turn structure.     

Isolation and structure of novel peptide inhibitor of HIV-1 integrase from marine polychaetes

A homogeneous peptide with m683 Da which inhibits HIV-1 integrase with IC50 3 x 10(-5) M was separated from aqueous extracts of marine worm Eunicidae sp. by multi-stage chromatography purification. The structure Asp-Leu-Hse-His-Ala-G1n was proposed for this peptide according to the amino acid analysis, automated amino acid Edman sequencing, TLC with the witness and homoserine MS/MS fragmentation. The proposed structure is the first example of natural peptide containing amino acid homoserine residue.     

Correlation between shiftide activity and HIV-1 integrase inhibition by a peptide selected from a combinatorial library

The human immunodeficiency virus type 1 (HIV-1) integrase (IN) protein is an emerging target for the development of anti-HIV drugs. We recently described a new approach for inhibiting IN by “shiftides”—peptides that inhibit the protein by shifting its oligomerization equilibrium from the active dimer to the inactive tetramer. In this study, we used the yeast two-hybrid system with the HIV-1 IN as a bait and a combinatorial peptide aptamer library as a prey to select peptides of 20 amino acids that specifically bind IN. Five non-homologous peptides, designated as IN-1 to IN-5, were selected. ELISA studies confirmed that IN binds the free peptides. All the five peptides interact with IN with comparable affinity (K_d≈10 μM), as was revealed by fluorescence anisotropy studies. Only one peptide, IN-1, inhibited the enzymatic activity of IN in vitro and the HIV-1 replication in cultured cells. In correlation, fluorescence anisotropy binding experiments revealed that of the five peptides, only the inhibitory IN-1 inhibited the DNA binding of IN. Analytical gel filtration experiments revealed that only the IN-1 and not the four other peptides shifted the oligomerization equilibrium of IN towards the tetramer. Thus, the results show a distinct correlation between the ability of the selected peptides to inhibit IN activity and that to shift its oligomerization equilibrium.     

C-terminal retroviral-type zinc finger domain from the HIV-1 nucleocapsid protein is structurally similar to the N-terminal zinc finger domain

Two-dimensional NMR spectroscopic and computational methods were employed for the structure determination of an 18-residue peptide with the amino acid sequence of the C-terminal retroviral-type (r.t.) zinc finger domain from the nucleocapsid protein (NCP) of HIV-1 [Zn(HIV1-F2)]. Unlike results obtained for the first retroviral-type zinc finger peptide, Zn(HIV1-F1), [Summers et al. (1990) Biochemistry 29, 329], broad signals indicative of conformational lability were observed in the 1H NMR spectrum of Zn-(HIV1-F2) at 25 degrees C. The NMR signals narrowed upon cooling to -2 degrees C, enabling complete 1H NMR signal assignment via standard two-dimensional (2D) NMR methods. Distance restraints obtained from qualitative analysis of 2D nuclear Overhauser effect (NOESY) data were used to generate 30 distance geometry (DG) structures with penalties (penalty = sum of the squared differences between interatomic distances defined in the restraints file and in the DG structures) in the range 0.02-0.03 A2. All structures were qualitatively consistent with the experimental NOESY spectrum based on comparisons with 2D NOESY back-calculated spectra. Superposition of the backbone atoms (C, C alpha, N) for residues C(1)-C(14) gave pairwise RMSD values in the range 0.16-0.75 A. The folding of Zn(HIV1-F2) is very similar to that observed for Zn(HIV1-F1). Small differences observed between the two finger domains are localized to residues between His(9) and Cys(14), with residues M(11)-C(14) forming a 3(10) helical corner.(ABSTRACT TRUNCATED AT 250 WORDS)     

Peptides derived from HIV-1 Rev inhibit HIV-1 integrase in a shiftide mechanism

The HIV-1 Integrase protein (IN) mediates the integration of the viral cDNA into the host genome. IN is an emerging target for anti-HIV drug design, and the first IN-inhibitor was recently approved by the FDA. We have developed a new approach for inhibiting IN by "shiftides": peptides derived from its cellular binding protein LEDGF/p75 that inhibit IN by shifting its oligomerization equilibrium from the active dimer to an inactive tetramer. In addition, we described two peptides derived from the HIV-1 Rev protein that interact with IN and inhibit its activity in vitro and in cells. In the current study, we show that the Rev-derived peptides also act as shiftides. Analytical gel filtration and cross-linking experiments showed that IN was dimeric when bound to the viral DNA, but tetrameric in the presence of the Rev-derived peptides. Fluorescence anisotropy studies revealed that the Rev-derived peptides inhibited the DNA binding of IN. The Rev-derived peptides inhibited IN catalytic activity in vitro in a concentration-dependent manner. Inhibition was much more significant when the peptides were added to free IN before it bound the viral DNA than when the peptides were added to a preformed IN-DNA complex. This confirms that the inhibition is due to the ability of the peptides to shift the oligomerization equilibrium of the free IN toward a tetramer that binds much weaker to the viral DNA. We conclude that protein-protein interactions of IN may serve as a general valuable source for shiftide design.     

The yeast putative transcriptional repressor RGM1 is a proline-rich zinc finger protein

I have cloned a yeast gene, RGM1, which encodes a proline-rich zinc, finger protein. rgm1 mutants do not show any obvious phenotype but overexpression of RGM1 gene greatly impairs cell growth. The proline-rich region of RGM1 attached to a heterologous DNA binding domain is able to repress the expression of the target gene. RGM1 shares similar zinc finger motifs with the mammalian Egr (early growth response) proteins as well as proline-rich sequences with a high serine and threonine content, suggesting that RGM1 and Egr proteins could have functional similarities.     

Cyclic peptide inhibitors of HIV-1 integrase derived from the LEDGF/p75 protein

Restricting linear peptides to their bioactive conformation is an attractive way of improving their stability and activity. We used a cyclic peptide library with conformational diversity for selecting an active and stable peptide that mimics the structure and activity of the HIV-1 integrase (IN) binding loop from its cellular cofactor LEDGF/p75 (residues 361-370). All peptides in the library had the same primary sequence, and differed only in their conformation. Library screening revealed that the ring size and linker structure had a huge effect on the conformation, binding and activity of the peptides. One of the cyclic peptides, c(MZ 4-1), was a potent and stable inhibitor of IN activity in vitro and in cells even after 8 days. The NMR structure of c(MZ 4-1) showed that it obtains a bioactive conformation that is similar to the parent site in LEDGF/p75.     

Structural characterization of a mutant peptide derived from ubiquitin: implications for protein folding

The formation of the N-terminal beta-hairpin of ubiquitin is thought to be an early event in the folding of this small protein. Previously, we have shown that a peptide corresponding to residues 1-17 of ubiquitin folds autonomously and is likely to have a native-like hairpin register. To investigate the causes of the stability of this fold, we have made mutations in the amino acids at the apex of the turn. We find that in a peptide where Thr9 is replaced by Asp, U(1-17)T9D, the native conformation is stabilized with respect to the wild-type sequence, so much so that we are able to characterize the structure of the mutant peptide fully by NMR spectroscopy. The data indicate that U(1-17)T9D peptide does indeed form a hairpin with a native-like register and a type I turn with a G1 beta-bulge, as in the full-length protein. The reason for the greater stability of the U(1-17)T9D mutant remains uncertain, but there are nuclear Overhauser effects between the side chains of Asp9 and Lys 11, which may indicate that a charge-charge interaction between these residues is responsible.     

Conformational aspects of HIV-1 integrase inhibition by a peptide derived from the enzyme central domain and by antibodies raised against this peptide.

Monospecific antibodies were raised against a synthetic peptide K159 (SQGVVESMNKELKKIIGQVRDQAEHLKTA) reproducing the segment 147-175 of HIV-1 integrase (IN). Synthesis of substituted and truncated analogs of K159 led us to identify the functional epitope reacting with antibodies within the C-terminal portion 163-175 of K159. Conformational studies combining secondary structure predictions, CD and NMR spectroscopy together with ELISA assays, showed that the greater is the propensity of the epitope for helix formation the higher is the recognition by anti-K159. Both the antibodies and the antigenic peptide K159 exhibited inhibitory activities against IN. In contrast, neither P159, a Pro-containing analog of K159 that presents a kink around proline but with intact epitope conformation, nor the truncated analogs encompassing the epitope, were inhibitors of IN. While the activity of antibodies is restricted to recognition of the sole epitope portion, that of the antigenic K159 likely requires interactions of the peptide with the whole 147-175 segment in the protein [Sourgen F., Maroun, R.G., Frère, V., Bouziane, A., Auclair, C., Troalen, F. & Fermandjian, S. (1996) Eur. J. Biochem. 240, 765-773]. Actually, of all tested peptides only K159 was found to fulfill condition of minimal number of helical heptads to achieve the formation of a stable coiled-coil structure with the IN 147-175 segment. The binding of antibodies and of the antigenic peptide to this segment of IN hampers the binding of IN to its DNA substrates in filter-binding assays. This appears to be the main effect leading to inhibition of integration. Quantitative analysis of filter-binding assay curves indicates that two antibody molecules react with IN implying that the enzyme is dimeric within these experimental conditions. Together, present data provide an insight into the structure-function relationship for the 147-175 peptide domain of the enzyme. They also strongly suggest that the functional enzyme is dimeric. Results could help to assess models for binding of peptide fragments to IN and to develop stronger inhibitors. Moreover, K159 antibodies when expressed in vivo might exhibit useful inhibitory properties.     

Structural and dynamical properties of a full-length HIV-1 integrase: molecular dynamics simulations

The structural and dynamical properties of the complete full-length structure of HIV-1 integrase were investigated using Molecular Dynamics approach. Simulations were carried out for the three systems, core domain only (CORE), full-length structure without (FULL) and with a Mg2+ (FULL+ION) in its active site, aimed to investigate the difference in the molecular properties of the full-length models due to their different construction procedures as well as the effects of the two ends, C- and N-terminal, on those properties in the core domain. The full-length structure was prepared from the two experimental structures of two-domain fragment. The following properties were observed to differ significantly from the previous reports: (i) relative topology formed by an angle between the three domains; (ii) the cavity size defined by the catalytic triad, Asp64, Asp116, and Glu152; (iii) distances and solvation of the Mg2+; and (iv) conformation of the catalytic residues. In addition, the presence of the two terminal domains decreases the mobility of the central core domain significantly.     

Structural characterization of a 39-residue synthetic peptide containing the two zinc binding domains from the HIV-1 p7 nucleocapsid protein by CD and NMR spectroscopy

A 39-residue peptide (p7-DF) containing the two zinc binding domains of the p7 nucleocapsid protein was prepared by solid-phase peptide synthesis. The solution structure of the peptide was characterized using circular dichroic and nuclear magnetic resonance spectroscopy in both the presence and absence of zinc ions. Circular dichroic spectroscopy indicates that the peptide exhibits a random coil conformation in the absence of zinc but appears to form an ordered structure in the presence of zinc. Two-dimensional nuclear magnetic resonance spectroscopy indicates that the two zinc binding domains within the peptide form stable, but independent, units upon the addition of 2 equivalents of ZnCl2 per equivalent of peptide. Structure calculations on the basis of nuclear Overhauser (NOE) data indicate that the two zinc binding domains have the same polypeptide fold within the errors of the coordinates (approximately 0.5 A for the backbone atoms, the zinc atoms and the coordinating cysteine and histidine ligands). The linker region (Arg17-Gly23) is characterized by a very limited number of sequential NOEs and the absence of any non-sequential NOEs suggest that this region of polypeptide chain is highly flexible. The latter coupled with the occurrence of a large number of basic residues (four out of seven) in the linker region suggests that it may serve to allow adaptable positioning of the nucleic acid recognition sequences within the protein.     

Structure-based design of a novel peptide inhibitor of HIV-1 integrase: a computer modeling approach

The insertion of viral DNA into the host chromosome is an essential step in the replication of HIV-1, and is carried out by an enzyme, HIV-1 integrase (IN). Since the latter has no human cellular counterpart, it is an attractive target for antiviral drug design. Several IN inhibitors having activities in the micromolar range have been reported to date. However, no clinically useful inhibitors have yet been developed. Recently reported diketo acids represent a novel and selective class of IN inhibitors. These are the only class which appear to selectively target integrase and two of the inhibitors, L-708,906 and L-731,988, are the most potent inhibitors of preintegration complexes described to date.The X-ray crystal structure of the IN catalytic domain complexed with a diketo acid derivative inhibitor, 5CITEP, has recently been determined. Although the structure is of great value as a platform for drug design, experimental data suggest that crystal packing effects influence the observed inhibitor position. This has been confirmed by computational docking studies using the latest version (3.0) of the AutoDock program, which has been shown to give results largely consistent with available experimental data. Using AutoDock 3.0 and SYBYL6.6 we have modeled the complexes of IN with the diketo acid inhibitors so as to identify the enzyme binding site. In the quest for novel, potent and selective small molecule inhibitors, we present here a new approach to peptide inhibitor design using a, b- unsaturated (dehydro) residues, which confer a unique conformation on a peptide sequence. Based on the above models, we selected a tetrapeptide sequence containing a dehydro-Phe residue, which was found to have an open conformation as ascertained from its X-ray crystal structure. Docking results on this peptide led us to propose a modification at the C-terminal end. The modified peptide was found to dock in a similar position as the diketo acid inhibitors and was predicted to have a comparable potency.     

Small-angle X-ray characterization of the nucleoprotein complexes resulting from DNA-induced oligomerization of HIV-1 integrase

HIV-1 integrase (IN) catalyses integration of a DNA copy of the viral genome into the host genome. Specific interactions between retroviral IN and long terminal repeats (LTR) are required for this insertion. To characterize quantitatively the influence of the determinants of DNA substrate specificity on the oligomerization status of IN, we used the small-angle X-ray scattering (SAXS) technique. Under certain conditions in the absence of ODNs IN existed only as monomers. IN preincubation with specific ODNs led mainly to formation of dimers, the relative amount of which correlated well with the increase in the enzyme activity in the 3′-processing reaction. Under these conditions, tetramers were scarce. Non-specific ODNs stimulated formation of catalytically inactive dimers and tetramers. Complexes of monomeric, dimeric and tetrameric forms of IN with specific and non-specific ODNs had varying radii of gyration (R_g), suggesting that the specific sequence-dependent formation of IN tetramers can probably occur by dimerization of two dimers of different structure. From our data we can conclude that the DNA-induced oligomerization of HIV-1 IN is probably of importance to provide substrate specificity and to increase the enzyme activity.