Metal ion binding sites in a group II intron core

Group II introns are catalytic RNA molecules that require divalent metal ions for folding, substrate binding, and chemical catalysis. Metal ion binding sites in the group II core have now been elucidated by monitoring the site-specific RNA hydrolysis patterns of bound ions such as Tb(3+) and Mg(2+). Major sites are localized near active site elements such as domain 5 and its surrounding tertiary interaction partners. Numerous sites are also observed at intron substructures that are involved in binding and potentially activating the splice sites. These results highlight the locations of specific metal ions that are likely to play a role in ribozyme catalysis.     

The environment of two metal ions surrounding the splice site of a group I intron.

Several divalent metal ions (Ca2+, Sr2+ and Pb2+) do not promote splicing, but instead induce cleavage at a single site in the conserved group I intron core in the absence of the guanosine cofactor at elevated pH, generating products with 5'-OH and 3'-phosphate ends. The reaction is competed by Mg2+, which does not cleave at this position, but hydrolyses the splice sites producing 3'-OH and 5'-phosphate ends. Mn2+ promotes both core cleavage and splice site hydrolysis under identical conditions, suggesting that two different metal atoms are involved, each responsible for one type of cleavage, and with different chemical and geometric requirements. Based on the core cleavage position and on the previously proposed coordination sites for Mg2+, we propose a structural location for two metal ions surrounding the splice site in the Michel-Westhof three-dimensional model of the group I intron core. The proposed location was strengthened by a first mutational analysis which supported the suggested interaction between one of the metal ions and the bulged residue in P7.     

Architecture and folding mechanism of the Azoarcus Group I Pre-tRNA

Self-splicing RNAs must evolve to function in their specific exon context. The conformation of a group I pre-tRNA(ile) from the bacterium Azoarcus was probed by ribonuclease T(1) and hydroxyl radical cleavage, and by native gel electrophoresis. Biochemical data and three-dimensional models of the pre-tRNA showed that the tRNA is folded, and that the tRNA and intron sequences form separate tertiary domains. Models of the active site before steps 1 and 2 of the splicing reaction predict that exchange of the external G-cofactor and the 3'-terminal G is accomplished by a slight conformational change in P9.0 of the Azoarcus group I intron. Kinetic assays showed that the pre-tRNA folds in minutes, much more slowly than the intron alone. The dependence of the folding kinetics on Mg(2+) and the concentration of urea, and RNase T(1) experiments showed that formation of native pre-tRNA is delayed by misfolding of P3-P9, including mispairing between residues in P9 and the tRNA. Thus, although the intron and tRNA sequences form separate domains in the native pre-tRNA, their folding is coupled via metastable non-native base-pairs. This could help prevent premature processing of the 5' and 3' ends of unspliced pre-tRNA.     

Mapping divalent metal ion binding sites in a group II intron by Mn(2+)- and Zn(2+)-induced site-specific RNA cleavage.

The function of group II introns depends on positively charged divalent metal ions that stabilize the ribozyme structure and may be directly involved in catalysis. We investigated Mn2+- and Zn2+-induced site-specific RNA cleavage to identify metal ions that fit into binding pockets within the structurally conserved bI1 group II intron domains (DI-DVI), which might fulfill essential roles in intron function. Ten cleavage sites were identified in DI, two sites in DIII and two in DVI. All cleavage sites are located in the center or close to single-stranded and flexible RNA structures. Strand scissions mediated by Mn2+/Zn2+ are competed for by Mg2+, indicating the existence of Mg2+ binding pockets in physical proximity to the observed Mn2+-/Zn2+-induced cleavage positions. To distinguish between metal ions with a role in structure stabilization and those that play a more specific and critical role in the catalytic process of intron splicing, we combined structural and functional assays, comparing wild-type precursor and multiple splicing-deficient mutants. We identified six regions with binding pockets for Mg2+ ions presumably playing an important role in bI1 structure stabilization. Remarkably, assays with DI deletions and branch point mutants revealed the existence of one Mg2+ binding pocket near the branching A, which is involved in first-step catalysis. This pocket formation depends on precise interaction between the branching nucleotide and the 5' splice site, but does not require exon-binding site 1/intron binding site 1 interaction. This Mg2+ ion might support the correct placing of the branching A into the 'first-step active site'.     

Non-enzymatic excision of pre-tRNA introns?

We used human tRNA(Tyr) precursor as a substrate to study self-excision of a pre-tRNA intron. This RNA was synthesized in vitro in a HeLa cell extract. It contains a 5' leader, an intron of 20 nucleotides and a 3' trailer. Self-cleavage of pre-tRNA(Tyr) occurs in 100 mM NH4OAc at a pH ranging from 6 to 8.5 in the presence of spermine, MgCl2 and Triton X-100 under conditions very similar to enzymatic intron excision. The reaction is temperature-dependent, relatively fast as compared to the enzyme-catalysed reaction and leads to fragments which resist further degradation. The detailed structure of all major and minor cleavage products was established by fingerprint analyses. Non-enzymatic cleavage occurs predominantly at the 3' splice site and to a minor extent at the 5' splice site. Other minor cleavage sites are located within the intron and in the 3' trailer. Putative 5' and 3' tRNA halves resulting from pre-tRNA(Tyr) self-cleavage are substrates for wheat germ RNA ligase, suggesting that the cleavage reaction yields 2',3'-cyclic phosphate and 5'-hydroxyl termini. Pre-tRNA splicing endonuclease is believed to cleave both the 5' and the 3' splice site. However, on the basis of our results we propose that this enzyme may support the formation of a pre-tRNA tertiary structure favourable for autocatalytic intron excision and impair unspecific self-cleavage.     

Functionally distinct nucleic acid binding sites for a group I intron encoded RNA maturase/DNA homing endonuclease

A large number of group I introns encode a family of homologous proteins that either promote intron splicing (maturases) or are site-specific DNA endonucleases that function in intron mobility (a process called "homing"). Genetic studies have shown that some of these proteins have both activities, yet how a single protein carries out both functions remains obscure. The similarity between respective DNA-binding sites and the RNA structure near the 5' and 3' splice sites has fueled speculation that such proteins may use analogous interactions to perform both functions. The Aspergillus nidulans mitochondrial COB group I intron encodes a bi-functional protein, I-AniI, that has both RNA maturase and site-specific DNA endonuclease activities in vitro. Here, we show that I-AniI shows distinctive features of the endonuclease family to which it belongs, including highly specific, tight binding and sequential DNA strand cleavage. Competition experiments demonstrate that I-AniI binds the COB intron RNA even in saturating concentrations of its DNA target site substrate, suggesting that the protein has a separate binding site for RNA. In addition, we provide evidence that two different DNA-binding site mutants of I-AniI have little effect on the protein's RNA maturation activity. Since RNA splicing is likely a secondary adaptation of the protein, these observations support a model in which homing endonucleases may have developed maturase function by utilizing a hitherto "non-functional" protein surface.     

Terbium-mediated footprinting probes a catalytic conformational switch in the antigenomic hepatitis delta virus ribozyme

The two forms of the hepatitis delta virus ribozyme are derived from the genomic and antigenomic RNA strands of the human hepatitis delta virus (HDV), where they serve a crucial role in pathogen replication by catalyzing site-specific self-cleavage reactions. The HDV ribozyme requires divalent metal ions for formation of its tertiary structure, consisting of a tight double-nested pseudoknot, and for efficient self- (or cis-) cleavage. Comparison of recently solved crystal structures of the cleavage precursor and 3' product indicates that a significant conformational switch is required for catalysis by the genomic HDV ribozyme. Here, we have used the lanthanide metal ion terbium(III) to footprint the precursor and product solution structures of the cis-acting antigenomic HDV ribozyme. Inhibitory Tb(3+) binds with high affinity to similar sites on RNA as Mg(2+) and subsequently promotes slow backbone scission. We find subtle, yet significant differences in the terbium(III) footprinting pattern between the precursor and product forms of the antigenomic HDV ribozyme, consistent with differences in conformation as observed in the crystal structures of the genomic ribozyme. In addition, UV melting profiles provide evidence for a less tight tertiary structure in the precursor. In both the precursor and product we observe high-affinity terbium(III) binding sites in joining sequence J4/2 (Tb(1/2) approximately 4 microM) and loop L3, which are key structural components forming the catalytic core of the HDV ribozyme, as well as in several single-stranded regions such as J1/2 and the L4 tetraloop (Tb(1/2) approximately 50 microM). Sensitized luminescence spectroscopy confirms that there are at least two affinity classes of Tb(3+) binding sites. Our results thus demonstrate that a significant conformational change accompanies catalysis in the antigenomic HDV ribozyme in solution, similar to the catalytic conformational switch observed in crystals of the genomic form, and that structural and perhaps catalytic metal ions bind close to the catalytic core.     

Splice site selection by intron aI3 of the COX1 gene from Saccharomyces cerevisiae.

Interactions of the 5' and 3' splice sites with intron internal sequences of the yeast mitochondrial group I intron aI3 were studied using mutation analysis. The results can be fully explained by the splice guide model in which the splice sites are defined by the Internal Guide Sequence. No evidence was found for an alternative interaction between intron nucleotides preceding the 3' splice site and nucleotides in the vicinity of the core region as was found for the Tetrahymena intron. Our results also suggest that binding of the 5' and 3' splice site nucleotides to the IGS can not take place simultaneously. The intron must therefore undergo conformational changes as the reaction proceeds from the first step of self splicing, GTP attack at the 5' splice site, to exon ligation, the second step.     

Structural metals in the group I intron: a ribozyme with a multiple metal ion core

Metal ions play key roles in the folding and function for many structured RNAs, including group I introns. We determined the X-ray crystal structure of the Azoarcus bacterial group I intron in complex with its 5' and 3' exons. In addition to 222 nucleotides of RNA, the model includes 18 Mg(2+) and K(+) ions. Five of the metals bind within 12 A of the scissile phosphate and coordinate the majority of the oxygen atoms biochemically implicated in conserved metal-RNA interactions. The metals are buried deep within the structure and form a multiple metal ion core that is critical to group I intron structure and function. Eight metal ions bind in other conserved regions of the intron structure, and the remaining five interact with peripheral structural elements. Each of the 18 metals mediates tertiary interactions, facilitates local bends in the sugar-phosphate backbone or binds in the major groove of helices. The group I intron has a rich history of biochemical efforts aimed to identify RNA-metal ion interactions. The structural data are correlated to the biochemical results to further understand the role of metal ions in group I intron structure and function.     

Divalent metal ion binding to a conserved wobble pair defining the upstream site of cleavage of group I self-splicing introns.

The upstream site of cleavage of all group I self-splicing introns is identified by an absolutely conserved U.G base pair. Although a wobble C.A pair can substitute the U.G pair, all other combinations of nucleotides at this position abolish splicing, suggesting that it is an unusual RNA structure, rather than sequence, that is recognized by the catalytic intron core. RNA enzymes are metalloenzymes, and divalent metal ion binding may be an important requirement for splice site recognition and catalysis. The paramagnetic broadening of NMR resonances upon manganese binding at specific sites was used to probe the interaction between divalent metal ions and an oligonucleotide model of a group I intron ribozyme substrate. Unlike previous studies in which only imino proton resonances were monitored, we have used isotopically labelled RNA and a set of complete spectral assignments to identify the location of the divalent metal binding site with much greater detail than previously possible. Two independent metal binding sites were identified for this oligonucleotide. A first metal binding site is located in the major groove of the three consecutive G.C base pairs at the end of double helical stem. A second site is found in the major groove of the RNA double helix in the vicinity of the U.G base pair. These results suggest that metal ion coordination (or a metal bridge) and tertiary interactions identified biochemically, may be used by group I intron ribozymes for substrate recognition.     

Structural and biochemical characterization of a new Mg(2+) binding site near Tyr94 in the restriction endonuclease PvuII

We have determined the crystal structure of the PvuII endonuclease in the presence of Mg(2+). According to the structural data, divalent metal ion binding in the PvuII subunits is highly asymmetric. The PvuII-Mg(2+) complex has two distinct metal ion binding sites, one in each monomer. One site is formed by the catalytic residues Asp58 and Glu68, and has extensive similarities to a catalytically important site found in all structurally examined restriction endonucleases. The other binding site is located in the other monomer, in the immediate vicinity of the hydroxyl group of Tyr94; it has no analogy to metal ion binding sites found so far in restriction endonucleases. To assign the number of metal ions involved and to better understand the role of Mg(2+) binding to Tyr94 for the function of PvuII, we have exchanged Tyr94 by Phe and characterized the metal ion dependence of DNA cleavage of wild-type PvuII and the Y94F variant. Wild-type PvuII cleaves both strands of the DNA in a concerted reaction. Mg(2+) binding, as measured by the Mg(2+) dependence of DNA cleavage, occurs with a Hill coefficient of 4, meaning that at least two metal ions are bound to each subunit in a cooperative fashion upon formation of the active complex. Quenched-flow experiments show that DNA cleavage occurs about tenfold faster if Mg(2+) is pre-incubated with enzyme or DNA than if preformed enzyme-DNA complexes are mixed with Mg(2+). These results show that Mg(2+) cannot easily enter the active center of the preformed enzyme-DNA complex, but that for fast cleavage the metal ions must already be bound to the apoenzyme and carried with the enzyme into the enzyme-DNA complex. The Y94F variant, in contrast to wild-type PvuII, does not cleave DNA in a concerted manner and metal ion binding occurs with a Hill coefficient of 1. These results indicate that removal of the Mg(2+) binding site at Tyr94 completely disrupts the cooperativity in DNA cleavage. Moreover, in quenched-flow experiments Y94F cleaves DNA about ten times more slowly than wild-type PvuII, regardless of the order of mixing. From these results we conclude that wild-type PvuII cleaves DNA in a fast and concerted reaction, because the Mg(2+) required for catalysis are already bound at the enzyme, one of them at Tyr94. We suggest that this Mg(2+) is shifted to the active center during binding of a specific DNA substrate. These results, for the first time, shed light on the pathway by which metal ions as essential cofactors enter the catalytic center of restriction endonucleases.     

Intron sequence and structure requirements for tRNA splicing in Saccharomyces cerevisiae

Predicted single-stranded structure at the 3' splice site is a conserved feature among intervening sequences (IVSs) in eukaryotic nuclear tRNA precursors. The role of 3' splice site structure in splicing was examined through hexanucleotide insertions at a central intron position in the Saccharomyces cerevisiae tRNA gene. These insertions were designed to alter the structure at the splice site without changing its sequence. Endonuclease cleavage of pre-tRNA substrates was then measured in vitro, and suppressor activity was examined in vivo. A precursor with fully double-stranded structure at the 3' splice site was not cleaved by endonuclease. The introduction of one unpaired nucleotide at the 3' splice site was sufficient to restore cleavage, although at a reduced rate. We have also observed that guanosine at the antepenultimate position provides a second consensus feature among IVSs in tRNA precursors. Point mutations at this position were found to affect splicing although there was no specific requirement for guanosine. These and previous results suggest that elements of secondary and/or tertiary structure at the 3' end of IVSs are primary determinants in pre-tRNA splice site utilization whereas specific sequence requirements are limited.     

Solution structure of domain 5 of a group II intron ribozyme reveals a new RNA motif

Domain 5 (D5) is the central core of group II intron ribozymes. Many base and backbone substituents of this highly conserved hairpin participate in catalysis and are crucial for binding to other intron domains. We report the solution structures of the 34-nucleotide D5 hairpin from the group II intron ai5 gamma in the absence and presence of divalent metal ions. The bulge region of D5 adopts a novel fold, where G26 adopts a syn conformation and flips down into the major groove of helix 1, close to the major groove face of the catalytic AGC triad. The backbone near G26 is kinked, exposing the base plane of the adjacent A-U pair to the solvent and causing bases of the bulge to stack intercalatively. Metal ion titrations reveal strong Mg(2+) binding to a minor groove shelf in the D5 bulge. Another distinct metal ion-binding site is observed along the minor groove side of the catalytic triad, in a manner consistent with metal ion binding in the ribozyme active site.     

Structural analysis of the Neurospora mitochondrial large rRNA intron and construction of a mini-intron that shows protein-dependent splicing.

The gene encoding the Neurospora mitochondrial large rRNA contains a single group I intron of 2.3 kilobases that is not self-splicing in vitro. We showed previously that the splicing of this intron in vivo and in vitro is dependent on the Neurospora cyt-18 protein, mitochondrial tyrosyl-tRNA synthetase. In the present work, we carried out further structural analysis of the intron and constructed mutant derivatives of it in order to identify features that are either required for splicing or prevent it from self-splicing. Previous studies showed that the intron contains a large hairpin structure near the 5' splice site. By mapping RNase III cleavage sites, we identified this hairpin structure as an extended P2 stem. We construct a mini-intron of 388 nucleotides by deleting the 426-amino acid intron open reading frame, most of the 5' intron hairpin, and all of L8. This mini-intron shows the same protein-dependent splicing as the full length intron, but is still not self-splicing. Further deletions, which remove all of P2 or all or part of P4, P6, P7, or P9, inactivate splicing, suggesting that an intact group I intron core structure is required. Strengthening the P1, P10, or P9.0 pairings did not enable the mini-intron to self-splice. Our findings indicate that the inability of the mitochondrial large rRNA intron to self-splice reflects deficiency of a structure or activity required for cleavage at the 5' splice site, either in the intron core itself or in the interaction between the core and the P1 stem.     

Lead cleavage sites in the core structure of group I intron-RNA.

Self-splicing of group I introns requires divalent metal ions to promote catalysis as well as for the correct folding of the RNA. Lead cleavage has been used to probe the intron RNA for divalent metal ion binding sites. In the conserved core of the intron, only two sites of Pb2+ cleavage have been detected, which are located close to the substrate binding sites in the junction J8/7 and at the bulged nucleotide in the P7 stem. Both lead cleavages can be inhibited by high concentrations of Mg2+ and Mn2+ ions, suggesting that they displace Pb2+ ions from the binding sites. The RNA is protected from lead cleavage by 2'-deoxyGTP, a competitive inhibitor of splicing. The two major lead induced cleavages are both located in the conserved core of the intron and at phosphates, which had independently been demonstrated to interact with magnesium ions and to be essential for splicing. Thus, we suggest that the conditions required for lead cleavage occur mainly at those sites, where divalent ions bind that are functionally involved in catalysis. We propose lead cleavage analysis of functional RNA to be a useful tool for mapping functional magnesium ion binding sites.     

Two distinct catalytic strategies in the hepatitis δ virus ribozyme cleavage reaction

The hepatitis delta virus (HDV) ribozyme and related RNAs are widely dispersed in nature. This RNA is a small nucleolytic ribozyme that self-cleaves to generate products with a 2',3'-cyclic phosphate and a free 5'-hydroxyl. Although small ribozymes are dependent on divalent metal ions under biologically relevant buffer conditions, they function in the absence of divalent metal ions at high ionic strengths. This characteristic suggests that a functional group within the covalent structure of small ribozymes is facilitating catalysis. Structural and mechanistic analyses have demonstrated that the HDV ribozyme active site contains a cytosine with a perturbed pK(a) that serves as a general acid to protonate the leaving group. The reaction of the HDV ribozyme in monovalent cations alone never approaches the velocity of the Mg(2+)-dependent reaction, and there is significant biochemical evidence that a Mg(2+) ion participates directly in catalysis. A recent crystal structure of the HDV ribozyme revealed that there is a metal binding pocket in the HDV ribozyme active site. Modeling of the cleavage site into the structure suggested that this metal ion can interact directly with the scissile phosphate and the nucleophile. In this manner, the Mg(2+) ion can serve as a Lewis acid, facilitating deprotonation of the nucleophile and stabilizing the conformation of the cleavage site for in-line attack of the nucleophile at the scissile phosphate. This catalytic strategy had previously been observed only in much larger ribozymes. Thus, in contrast to most large and small ribozymes, the HDV ribozyme uses two distinct catalytic strategies in its cleavage reaction.     

NMR spectroscopic evidence for Mn(2+)(Mg(2+)) binding to a precursor-tRNA microhelix near the potential RNase P cleavage site

The binding of Mg(2+)/Mn(2+) to acceptor stem microhelices as minimal models for precursor-tRNA(Gly) is demonstrated by NMR spectroscopy. From the evaluation of COSY and NOESY spectra, binding sites for Mg(2+)/Mn(2+) can be inferred. In particular, one binding site exists near the ribose moiety of nucleotide -1 at the position of cleavage by RNase P. From comparison with a variant possessing a deoxynucleotide at this position, it is concluded that the 2'-OH group of this nucleotide is indispensable for coordinating the divalent metal ion. Hence, this catalytically important metal ion is "pre-bound" to the precursor-tRNA before complexation with RNase P.     

Splicing of a yeast proline tRNA containing a novel suppressor mutation in the anticodon stem

The intron-containing proline tRNAUGG genes in Saccharomyces cerevisiae can mutate to suppress +1 frameshift mutations in proline codons via a G to U base substitution mutation at position 39. The mutation alters the 3' splice junction and disrupts the bottom base-pair of the anticodon stem which presumably allows the tRNA to read a four-base codon. In order to understand the mechanism of suppression and to study the splicing of suppressor pre-tRNA, we determined the sequences of the mature wild-type and mutant suppressor gene products in vivo and analyzed splicing of the corresponding pre-tRNAs in vitro. We show that a novel tRNA isolated from suppressor strains is the product of frameshift suppressor genes. Sequence analysis indicated that suppressor pre-tRNA is spliced at the same sites as wild-type pre-tRNA. The tRNA therefore contains a four-base anticodon stem and nine-base anticodon loop. Analysis of suppressor pre-tRNA in vitro revealed that endonuclease cleavage at the 3' splice junction occurred with reduced efficiency compared to wild-type. In addition, reduced accumulation of mature suppressor tRNA was observed in a combined cleavage and ligation reaction. These results suggest that cleavage at the 3' splice junction is inefficient but not abolished. The novel tRNA from suppressor strains was shown to be the functional agent of suppression by deleting the intron from a suppressor gene. The tRNA produced in vivo from this gene is identical to that of the product of an intron+ gene, indicating that the intron is not required for proper base modification. The product of the intron- gene is a more efficient suppressor than the product of an intron+ gene. One interpretation of this result is that inefficient splicing in vivo may be limiting the steady-state level of mature suppressor tRNA.     

Ribozyme cleavage of a 2,5-phosphodiester linkage: mechanism and a restricted divalent metal-ion requirement.

The natural substrate cleaved by the hepatitis delta virus (HDV) ribozyme contains a 3',5'-phosphodiester linkage at the cleavage site; however, a 2',5'-linked ribose-phosphate backbone can also be cleaved by both trans-acting and self-cleaving forms of the HDV ribozyme. With substrates containing either linkage, the HDV ribozyme generated 2',3'-cyclic phosphate and 5'-hydroxyl groups suggesting that the mechanisms of cleavage in both cases were by a nucleophilic attack on the phosphorus center by the adjacent hydroxyl group. Divalent metal ion was required for cleavage of either linkage. However, although the 3',5'-linkage was cleaved slightly faster in Ca2+ than in Mg2+, the 2',5'-linkage was cleaved in Mg2+ (or Mn2+) but not Ca2+. This dramatic difference in metal-ion specificity is strongly suggestive of a crucial metal-ion interaction at the active site. In contrast to the HDV ribozymes, cleavage at a 2',5'-phosphodiester bond was not efficiently catalyzed by the hammerhead ribozyme. The relaxed linkage specificity of the HDV ribozymes may be due in part to lack of a rigid binding site for sequences 5' to the cleavage site.