Studies on transfer processes in mixing vessels: effect of gas on solid-liquid hydrodynamics using modified Rushton turbine agitators

The effect of gas on solid-liquid hydrodynamics in mixing vessels was studied to determine the agitation speed required to just completely suspend all the particles under gassed conditions, N _jsg and by measurement of the power consumption associated with this agitation speed. The solid particles have a mean diameter between 15–1000 μm. For their mixing are used standard and modified Rushton turbine agitators positioned singly or doubly on the same shaft. The modified turbine with a surface fraction of the perforations equal to 0.353 (TP3) was obtained through increase in the blade height of the Rushton turbine simultaneously with the perforation of the blade surface. The filled surface of the modified blade is equal to the blade surface of the standard Rushton turbine.     

Performance of industrial scale bioreactors with modified RUSHTON turbine agitators

The data presented here with respect to the behaviour of industrial scale stirred tank bioreactors equipped with modified RUSHTON turbine agitators in the biosynthesis processes of antibiotics are valid for that case that the power consumption is the same as it is in standard RUSHTON turbine agitators. Each modified RUSHTON turbine agitator was obtained through the variation of the blade surface by adding perforations so that the ratio between the perforation surface area and the full surface area (or the surface fraction of the perforations) is 0.36. In the fermentations of Streptomyces aureofaciens, Streptomyces rimosus and Penicillium chrysogenum producing tetracycline, oxytetracyline and penicillin, respectively, in bioreactors equipped with modified RUSHTON turbine agitators, the relative antibiotic production is increased by more than 30% compared to standard bioreactors.     

Studies on transfer processes in mixing vessels: power consumption of the modified Rushton turbine agitators in three-phase systems

In this work, the modified blade turbines, with the surface fraction of the perforations equal to 0.353, are used in the study of the relationship between the power consumption in three-phase systems and the superficial gas velocity, mixing intensity, agitator type, solid particles concentration, physical and rheological properties of the suspensions. The power consumption in three-phase mixing with modified turbines, single and double, is approximately 40% smaller than for the standard turbines at the same mixing intensity. The modified blade turbines are simple to manufacture and do not require any modification in electrical motor and drive assemblies.     

Studies on transfer processes in mixing vessels: suspending of solid particles in liquid by modified Rushton turbine agitators

The modified blade turbines are attractive alternatives to the standard Rushton turbine as they do not require any modification in the electrical engine motor and drive assemblies are simple to manufacture and have a reduced power consumption.The modified blades were obtained through increase in the blade height of the Rushton turbine simultaneously with perforation of the blade surface. The field surface of the modified blade is equal to the blade surface of the standard Rushton turbine.In this study the modified blade turbine with the surface fraction of the perforations equal to 0.353 is used.The complete suspension speed and the power dissipation in transition and turbulent regimes using standard and modified Rushton turbine agitators positioned singly or doubly on same shaft, in five solid-liquid systems were investigated.The solid particles used have the mean diameter between 15–1000 m.The modified blade turbine, noted as TP3, was found to be more efficient than the standard turbine in complete and homogeneous suspension.List of Symbols A distance between turbine and the vessel bottom (m) - c dimensionless constant (-) - d agitator diameter (m) - d _p surface-to-volume mean diameter of the particle (m) - D vessel diameter (m) - (H _L )₁ suspension height for one turbine immersed (m) - (H _L )₂ suspension height for two turbines immersed (m) - K consistency index (Pa s ⁿ ) - l _k eddy-size characteristic (m) - N flow behaviour index (-) - N _p number of blades of the mixing system (-) - N agitator speed (s^–1) - N _js agitator speed that just causes complete suspension (s^–1) - Ne P_L/_LN³d⁵ power number in liquid system (-) - (Ne) _g P_g/_spN³d⁵ power number in solid-liquid system (-) - P _L power consumption in liquid system (W) - P _s power consumption in solid-liquid system (W) - r coefficient of correlation (-) - R distance between turbines (m) - Re _spNd²/ _a Reynolds number (-) - S suspension parameter in Zwietering equation (2) (-) - S _C full surface of the blade (m²) - S _G surface of the perforations applied on the blade (m²) - S _G /S _C surface fraction of the perforations (-) - X particle concentration (g/l) - w baffle width (m) - _js specific power input per mass at the complete suspension state (W/kg) - _a apparent viscosity under mixing conditions (Pa s) - _L kinematic viscosity of the liquid (m²/s) - _L density of liquid (Kg/m³) - _s density of solid (Kg/m³) - _sp density of suspension (Kg/m³)     

Mixing design for enzymatic hydrolysis of sugarcane bagasse: methodology for selection of impeller configuration

One of the major process bottlenecks for viable industrial production of second generation ethanol is related with technical–economic difficulties in the hydrolysis step. The development of a methodology to choose the best configuration of impellers towards improving mass transfer and hydrolysis yield together with a low power consumption is important to make the process cost-effective. In this work, four dual impeller configurations (DICs) were evaluated during hydrolysis of sugarcane bagasse (SCB) experiments in a stirred tank reactor (3 L). The systems tested were dual Rushton turbine impellers (DIC1), Rushton and elephant ear (down-pumping) turbines (DIC2), Rushton and elephant ear (up-pumping) turbines (DIC3), and down-pumping and up-pumping elephant ear turbines (DIC4). The experiments were conducted during 96 h, using 10 % (m/v) SCB, pH 4.8, 50 °C, 10 FPU/g_biomass, 470 rpm. The mixing time was successfully used as the characteristic parameter to select the best impeller configuration. Rheological parameters were determined using a rotational rheometer, and the power consumptions of the four DICs were on-line measured with a dynamometer. The values obtained for the energetic efficiency (the ratio between the cellulose to glucose conversion and the total energy) showed that the proposed methodology was successful in choosing a suitable configuration of impellers, wherein the DIC4 obtained approximately three times higher energetic efficiency than DIC1. Furthermore a scale-up protocol (factor scale-up 1000) for the enzymatic hydrolysis reactor was proposed.     

Scale-up on basis of structured mixing models: A new concept

A new scale-up concept based upon mixing models for bioreactors equipped with Rushton turbines using the tanks-in-series concept is presented. The physical mixing model includes four adjustable parameters, i.e., radial and axial circulation time, number of ideally mixed elements in one cascade, and the volume of the ideally mixed turbine region. The values of the model parameters were adjusted with the application of a modified Monte-Carlo optimization method, which fitted the simulated response function to the experimental curve. The number of cascade elements turned out to be constant (N = 4). The model parameter radial circulation time is in good agreement with the one obtained by the pumping capacity. In case of remaining parameters a first or second order formal equation was developed, including four operational parameters (stirring and aeration intensity, scale, viscosity). This concept can be extended to several other types of bioreactors as well, and it seems to be a suitable tool to compare the bioprocess performance of different types of bioreactors. (c) 1994 John Wiley & Sons, Inc.     

Gas-liquid dispersion with dual Rushton turbine impellers

Aerated and unaerated power consumption and flow patterns in a 0.56 m diameter agitated vessel containing water with dual Rushton turbines have been studied. Under unaerated conditions with a liquid height-to-diameter ratio of 2, an impeller spacing of 2 to 3 times the impeller is required for each to draw an amount of power equal to a single impeller. For aerated conditions, if a similar spacing is used, equations for the flooding-loading transition and for power consumption for a single Rushton impeller can be extended relatively easily to dual systems. All results for this spacing are explained by reference to bulk flow patterns and gassed-filled cavity structures and the proportion of sparged gas flowing through the upper impeller is also estimated. Such a spacing is generally recommended since it maximizes the power draw and hence the potential for oxygen mass transfer. Data are presented for other spacings but the results do not fit in easily with single agitator studies because strong impeller-impeller flow pattern interactions occur.     

The influence of impeller type in pilot scale xanthan fermentations

The rheological complexity of Xanthan fermentations presents an interesting problem from a mixing viewpoint, because the phenomena of poor bulk blending and low oxygen mass transfer rates inherent in highly viscous fermentations (and their consequences) can be systematically investigated, even at the pilot plant scale. This study in a 150 L fermentor compares the physical and biological performance of four pairs of impellers: a standard Rushton turbine, a large diameter Rushton turbine, a Prochem Maxflo T, and a Scaba 6SRGT. Accurate in-fermentor power measurements, essential for the comparison of impellers in relation to operating costs are also reported. It is demonstrated that the agitator performance in Xanthan fermentations is very specific and the choice of which impeller to use in bioreactors to obtain enhanced performance is dependant on the applied criterion. None of the criterion favored the use of the standard Rushton turbine, therefore suggesting that there are strong grounds for retrofitting these impellers with either large diameter impellers of similar design or with novel agitators. In addition, fluid dynamic modeling of cavern formation has clearly highlighted the importance of a well mixed and oxygenated region for providing the capacity for high microbial oxygen uptake rates which govern Xanthan productivity and quality. Copyright 1998 John Wiley & Sons, Inc.     

Power consumption of three impeller combinations in mixing Xanthan fermentation broths

Xanthan gum fermentation represents a good model for the study of the mixing of rheologically complex culture broths. Most of the previous work on power consumption dealt with ‘standard’, single impellers and used model fluids to simulate xanthan broths. This work describes the characterization of three dual-impeller combinations (D/T = 0·53) for the mixing of dehydrated—reconstituted fermentation broths of Xanthomonas campestris that had matched rheology to the actual broths. The bottom impeller was a Rushton turbine (RT) and the top impeller was another RT, a 45° pitched blade turbine (PT) or an A-310 Lightnin mixer (A310). The experiments were carried out in a tank of 0·0094 m³ working volume equipped with an air bearing dynamometer. The power was measured in a wide range of xanthan concentrations (5–40 kg m⁻³) in aerated (0·25, 0·5 and 1·0 vvm) and unaerated conditions. Unaerated power number (Po) vs. Reynolds number (Re) curves showed similar trends for the three combinations. Exponents close to −1 were obtained in the laminar region. A minimum in Po (Po_min) occurred at Re = 30–40, then increasing to a plateau value which was evident at Re> 200. In the transition region Po_min values were 4·3 (RT and RT), 3·6 (RT and PT) and 2·4 (RT and A310). The aerated power data for (RT and PT) and (RT and A-310) showed higher torque instabilities than the dual RT combinations at higher xanthan concentrations. The higher the xanthan concentrations, the higher the drop in power and the less important the effect of the aeration rate. Among the combinations tested, when using Rushton turbines, the well-mixed ‘cavern’ reached the tank wall (i.e., fluid motion was observed) at the lowest volumetric power input. High     

Comparing a range of impellers for “stirring as foam disruption”

The effectiveness of a range of impellers for “stirring as foam disruption” (SAFD) is assessed in a vessel of 0.72 m diameter and an aspect ratio of 2:1. Measurement of power drawn by the impeller achieving SAFD and of the three-dimensional flow field close to the dispersion surface are both used to explain the findings along with the global gas hold-up. A large radial flow Rushton turbine can disrupt foam at a great height but requires high power. Down-pumping hydrofoils are only effective when the ungassed liquid height is below the level of the impeller employed to disrupt foam. Up-pumping hydrofoils are the most effective because their flow pattern gives rise to high velocities across the dispersion surface, which are able to entrain foam in the downflow generated at the walls.     

Scale-up of stirring as foam disruption (SAFD) to industrial scale

Foam disruption by agitation—the stirring as foam disruption (SAFD) technique—was scaled up to pilot and production scale using Rushton turbines and an up-pumping hydrofoil impeller, the Scaba 3SHP1. The dominating mechanism behind SAFD—foam entrainment—was also demonstrated at production scale. The mechanistic model for SAFD defines a fictitious liquid velocity generated by the (upper) impeller near the dispersion surface, which is correlated with complete foam disruption. This model proved to be scalable, thus enabling the model to be used for the design of SAFD applications. Axial upward pumping impellers appeared to be more effective with respect to SAFD than Rushton turbines, as demonstrated by retrofitting a 12,000 l bioreactor, i.e. the triple Rushton configuration was compared with a mixed impeller configuration from Scaba with a 20% lower ungassed power draw. The retrofitted impeller configuration allowed 10% more broth without risking excessive foaming. In this way a substantial increase in the volumetric productivity of the bioreactor was achieved. Design recommendations for the application of SAFD are given in this paper. Using these recommendations for the design of a 30,000 l scale bioreactor, almost foamless Escherichia coli fermentations were realised. Electronic Publication     

Vessel dimensions in liana and tree species of Gnetum (Gnetales)

Maximum vessel diameters were examined in the secondary xylem of stems of Gnetum of various sizes. One tree (G. gnemon) and 13 liana species were compared. In three species, vessel length distributions were determined by the latex paint method, and showed many short and fewer long vessels. Latex and compressed air methods, used to find the maximum vessel lengths, showed that maximum vessel lengths were similar for three species of Gnetum. In old stems, mean and maximum vessel diameters tended to be greater in lianas than in the tree species. The skewed distribution of vessel lengths and the trend of wider vessels in lianas as compared to trees were similar to those distributions and trends described previously for angiosperms. In random samples of macerated wood of three species, simple perforation plates were most common in vessel members of all species. Foraminate and modified foraminate perforations were less frequent. Average diameter of vessel members with either foraminate or modified foraminate perforations was less than for those with simple perforations. The resemblance of Gnetum vessels to those of angiosperm trees and vines is most likely a case of convergent evolution (homoplasy) in xylem characteristics.     

Power consumption and maximum energy dissipation in a milliliter‐scale bioreactor

Mean power consumption and maximum local energy dissipation were measured as function of operating conditions of a milliliter‐scale stirred tank bioreactor (V = 12 mL) with a gas‐inducing impeller. A standard laboratory‐scale stirred tank bioreactor (V = 1,200 mL) with Rushton turbines was used as reference. The measured power characteristics (Newton number as function of Reynolds number) were the same on both scales. The changeover between laminar and turbulent flow regime was observed at a Reynolds number of 3,000 with the gas‐inducing stirrer on a milliliter‐scale. The Newton number (power number) in the turbulent flow regime was 3.3 on a milliliter‐scale, which is close to values reported for six‐blade Rushton turbines of standard bioreactors. Maximum local energy dissipation (ε_max) was measured using a clay/polymer flocculation system. The maximum local energy dissipation in the milliliter‐scale stirred tank bioreactor was reduced compared with the laboratory‐scale stirred tank at the same mean power input per unit mass (ε_ø), yielding ε_max/ε_ø ≈ 10 compared with ε_max/ε_ø ≈ 16. Hence, the milliliter‐scale stirred tank reactor distributes power more uniformly in the reaction medium. These results are in good agreement with literature data, where a decreasing ε_max/ε_ø with increasing ratio of impeller diameter to reactor diameter is found (d/D = 0.7 compared with d/D = 0.4). Based on these data, impeller speeds can now be easily adjusted to achieve the same maximum local energy dissipation at different scales. This enables a more reliable and robust scale‐up of bioprocesses from milliliter‐scale to liter‐scale reactors. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Effect of mixing and mass transfer conditions on gellan production by Auromonas elodea

The effect of fermentor hydrodynamics on gellan fermentation kinetics and rheological properties of the culture broth were studied using various mixing and mass transfer conditions. Different impeller systems, such as a helical ribbon (HR250), Rushton turbines (RT600) and a pitched-blade turbine combined with an in-flow turbine (CT600) were tested along with extra oxygen supply (HR250Ox) or reduced nitrogen amount in the culture medium (HR250N). The highest gellan productions (around 13 g/l of native gellan) were observed when oxygen transfer capacity was good (i.e. HR250Ox, HR250N, CT800 and RT600). The volumetric power input was found to be a good tool to evaluate the gellan synthesis progress especially with the helical ribbon impeller where no stagnant zone formation occurred. Macromixing conditions affected the rheological properties of the final broth. For instance, the highly heterogeneous conditions (with RT600) led to a more shear-thinning broth with a lower yield stress value than the most homogeneous conditions (with HR250Ox). Good correlations between yield stress value and gellan concentration were established with respect to the fermentation pattern.     

Effect of the impeller-sparger configuration over Trichoderma harzianum growth in four-phases cultures under constant dissolved oxygen

Three impeller-sparger configurations were used to evaluate the effect of different hydrodynamic conditions over fungal growth in rheologically complex cultures of Trichoderma harzianum using castor oil as sole carbon source. Three spargers (ring, sintered and 5-orifice) in combination with a turbine impeller system "TIS" (two Rushton turbines) or a hybrid impeller system "HIS" (Rushton turbine and a marine propeller as lower and upper impellers) were used. Their performance was assessed in terms of the response towards disturbance (PID oxygen control settings) and oxygen mass transfer (k_La). To avoid oxygen limitations, all cultures were controlled at 10% DOT by gas blending. Top to bottom mixing, and hence bulk blending, was improved when the - axial flow - HIS was used, ensuring phase interaction and substrate (oil) circulation. The 5-orifice sparger in combination with the TIS configuration yielded the longest lag phase and lowest k_La due to poor bulk blending and to the low gas-liquid interfacial area developed. The highest k_La was achieved with the sintered sparger-HIS probably due to considerable interfacial bubble area enhancement. However, growth limitation occurred as consequence of poor substrate availability as a stable air-oil emulsion was formed at the top of the tank. The best compromise between bulk blending (phase interaction), oxygen transfer (k_La) and fungal growth (growth rate) was achieved with the ring sparger-HIS configuration.     

Influence of impeller type on power input in fermentation vessels

Prior investigations comparing radial flow Rushton impellers with axial flow hydrofoil impellers (Maxflo T and A315) were extended at the pilot scale. Six types of impellers (disk-style Rushton, Prochem Maxflo T hydrofoils of three diameters pumping downwards and A315 hydrofoils pumping upwards and downwards) were compared for qualitative differences in power number behavior with Reynolds' number, single versus double impeller power draw, gassed power reduction with aeration number and gas hold-up. Power measurements were obtained using watt transducers which, although limited in accuracy and prone to interferences, were able to provide useful qualitative monitoring results. Measurements were conducted using three model liquid systems: water, glycerol and Melojel (soluble starch). Apparent viscosities for actual Streptomyces cultivations were estimated using measured gassed power values and the experimental relationships obtained for gassed/ungassed power to aeration number and power number to Reynolds' number for the glycerol model system. Results confirmed the lower power number and lower shear environment for hydrofoil impellers, yet suggested useful trends for various process parameters and process fluids.     

A fluid dynamic study using a simulated viscous, shear thinning broth of the retrofitting of large agitated bioreactors

Studies were conducted(1) in 19-m(3) fermentors (14-m(3) working volume) using four Rushton turbines, four Prochem Maxflo Ts, and three Lightnin' A315s and the results in water have been reported earlier. Here, a 1.7 wt/vol% Xanthan solution has been used as the working fluid, simulating viscous broths to give Reynolds numbers (Re) between 1800 and 4500. As predicted from small-scale studies, the power numbers at these values of Re were similar to those in water. The K factor (the ratio of power draw under aerated conditions compared to non-aerated) was the same as in water at the higher values of Re, but at the lower values it fell more rapidly with increasing aeration rate and to a lower value than in water. At all times, K was higher than with Rushton turbines. Vibration characteristics were also measured. Under aerated conditions, the fermentors vibrated with an amplitude 75% to 100% less than in water due to viscous damping. With increasing air flow, the amplitude increased steadily due to the presence of very large and rapidly rising bubbles in such fluids to give values 2.5 to 3 times those in water. Nevertheless, these mechanical problems can be overcome, allowing such agitators to be used successfully in high viscosity mycelial fermentations. (c) 1996 John Wiley & Sons, Inc.     

荔枝次生木质部导管分子及穿孔板观察研究

运用细胞图像分析系统及显微照相的方法,对荔枝次生木质部导管分子进行了观察研究。在荔枝的次生木质部中导管分子存在着多种的样式,并且导管分子穿孔板存在着3种类型:两端均为一个单穿孔板;一端一个单穿孔板另一端两个单穿孔板;一端两个单穿孔板另一端三个单穿孔板。分别对其进行了描述,并从导管分子个体发育与系统发育的角度进行了讨论。     

The production of exopolysaccharides by Aureobasidium pullulans in fermenters with low-shear configurations

No increases in exopolysaccharide (EPS) yields in Aureobasidium pullulans were observed when grown with reduced-shear impellers instead of standard Rushton turbines in the same vessel. However, yields were dramatically reduced when the organism was grown in an airlift reactor. This fall in production could be counteracted by improving fluid circulation through the placement of impellers within the draught tube, a strategy that resulted in the highest EPS concentration (approx. 13 g l⁻¹) of all the fermenter configurations tested. Received: 24 June 1997 / Revised revision: 25 September 1997 / Accepted: 29 September 1997     

Dependence of mycelial morphology on impeller type and agitation intensity

The influence of the agitation conditions on the morphology of Penicillium chrysogenum (freely dispersed and aggregated forms) was examined using radial (Rushton turbines and paddles), axial (pitched blades, propeller, and Prochem Maxflow T), and counterflow impellers (Intermig). Culture broth was taken from a continuous fermentation at steady state and was agitated for 30 min in an ungassed vessel of 1.4-L working volume. The power inputs per unit volume of liquid in the tank, P/V(L), ranged from 0.6 to 6 kW/m(3). Image analysis was used to measure mycelial morphology. To characterize the intensity of the damage caused by different impellers, the mean total hyphal length (freely dispersed form) and the mean projected area (all dispersed types, i.e., also including aggregates) were used. [In this study, breakage of aggregates was taken into account quantitatively for the first time.]At 1.4-L scale and a given P/V(L), changes in the morphology depended significantly on the impeller geometry. However, the morphological data (obtained with different geometries and various P/V(L)) could be correlated on the basis of equal tip speed and two other, less simple, mixing parameters. One is based on the specific energy dissipation rate in the impeller region, which is simply related to P/V(L) and particular impeller geometrical parameters. The other which is developed in this study is based on a combination of the specific energy dissipation rate in the impeller swept volume and the frequency of mycelial circulation through that volume. For convenience, the function arising from this concept is called the "energy dissipation/circulation" function.To test the broader validity of these correlations, scale-up experiments were carried out in mixing tanks of 1.4, 20, and 180 L using a Rushton turbine and broth from a fed-batch fermentation. The energy dissipation/circulation function was a reasonable correlating parameter for hyphal damage over this range of scales, whereas tip speed, P/V(L), and specific energy dissipation rate in the impeller region were poor. Two forms of the energy dissipation/circulation function were considered, one of which additionally allowed for the numbers of vortices behind the blades of each impeller type. Although both forms were successful at correlating the data for the standard impeller designs considered here, there was preliminary evidence that allowing for the vortices would be valuable. (c) 1996 John Wiley & Sons, Inc.