Direct observation of Abeta amyloid fibril growth and inhibition

Amyloid fibril formation is a phenomenon common to many proteins and peptides, including amyloid beta (Abeta) peptide associated with Alzheimer's disease. To clarify the mechanism of fibril formation and to create inhibitors, real-time monitoring of fibril growth is essential. Here, seed-dependent amyloid fibril growth of Abeta(1-40) was visualized in real-time at the single fibril level using total internal reflection fluorescence microscopy (TIRFM) combined with the binding of thioflavin T, an amyloid-specific fluorescence dye. The clear image and remarkable length of the fibrils enabled an exact analysis of the rate of growth of individual fibrils, indicating that the fibril growth was a highly cooperative process extending the fibril ends at a constant rate. It has been known that Abeta amyloid formation is a stereospecific reaction and the stability is affected by l/d-amino acid replacement. Focusing on these aspects, we designed several analogues of Abeta(25-35), a cytotoxic fragment of Abeta(1-40), consisting of l and d-amino acid residues, and examined their inhibitory effects by TIRFM. Some chimeric Abeta(25-35) peptides inhibited the fibril growth of Abeta(25-35) strongly, although they could not inhibit the growth of Abeta(1-40). The results suggest that a more rational design of stereospecific inhibitors, combined with real-time monitoring of fibril growth, will be useful to invent a potent inhibitor preventing the amyloid fibril growth of Abeta(1-40) and other proteins.     

Mechanism of thioflavin T binding to amyloid fibrils

Thioflavin T is a benzothiazole dye that exhibits enhanced fluorescence upon binding to amyloid fibrils and is commonly used to diagnose amyloid fibrils, both ex vivo and in vitro. In aqueous solutions, thioflavin T was found to exist as micelles at concentrations commonly used to monitor fibrils by fluorescence assay ( approximately 10-20 microM). Specific conductivity changes were measured at varying concentration of thioflavin T and the critical micellar concentration was calculated to be 4.0+/-0.5 microM. Interestingly, changes in the fluorescence excitation and emission of thioflavin T were also dependent on the micelle formation. The thioflavin T micelles of 3 nm diameter were directly visualized using atomic force microscopy, and bound thioflavin T micelles were observed along the fibril length for representative fibrils. Increasing concentration of thioflavin T above the critical micellar concentration shows increased numbers of micelles bound along the length of the amyloid fibrils. Thioflavin T micelles were disrupted at low pH as observed by atomic force microscopy and fluorescence enhancement upon binding of thioflavin T to amyloid fibrils also reduced by several-fold upon decreasing the pH to below 3. This suggests that positive charge on the thioflavin T molecule has a role in its micelle formation that then bind the amyloid fibrils. Our data suggests that the micelles of thioflavin T bind amyloid fibrils leading to enhancement of fluorescence emission.     

Analyzing thioflavin T binding to amyloid fibrils by an equilibrium microdialysis-based technique

A new approach for the determination of the amyloid fibril - thioflavin T (ThT) binding parameters (the number of binding modes, stoichiometry, and binding constants of each mode) is proposed. This approach is based on the absorption spectroscopy determination of the concentration of free and bound to fibril dye in solutions, which are prepared by equilibrium microdialysis. Furthermore, the proposed approach allowed us, for the first time, to determine the absorption spectrum, molar extinction coefficient, and fluorescence quantum yield of the ThT bound to fibril by each binding modes. This approach is universal and can be used for determining the binding parameters of any dye interaction with a receptor, such as ANS binding to proteins in the molten globule state or to protein amorphous aggregates.     

Destruction of amyloid fibrils of keratoepithelin peptides by laser irradiation coupled with amyloid-specific thioflavin T

Mutations in keratoepithelin are associated with blinding ocular diseases, including lattice corneal dystrophy type 1 and granular corneal dystrophy type 2. These diseases are characterized by deposits of amyloid fibrils and/or granular non-amyloid aggregates in the cornea. Removing the deposits in the cornea is important for treatment. Previously, we reported the destruction of amyloid fibrils of β(2)-microglobulin K3 fragments and amyloid β by laser irradiation coupled with the binding of an amyloid-specific thioflavin T. Here, we studied the effects of this combination on the amyloid fibrils of two 22-residue fragments of keratoepithelin. The direct observation of individual amyloid fibrils was performed in real time using total internal reflection fluorescence microscopy. Both types of amyloid fibrils were broken up by the laser irradiation, dependent on the laser power. The results suggest the laser-induced destruction of amyloid fibrils to be a useful strategy for the treatment of these corneal dystrophies.     

l-Arginine reduces thioflavin T fluorescence but not fibrillation of bovine serum albumin

This work examines the effects of l-arginine (l-Arg) on the aggregation and amyloid fibrillation of bovine serum albumin (BSA). We demonstrate that l-Arg dose-dependently reduces thioflavin T (ThT) fluorescence of BSA within the l-Arg concentration range used (0–1.4 M). However, as revealed by electron microscopy, size exclusion chromatography, and dynamic light scattering results, l-Arg does not prevent amyloid-like fibril formation by BSA. We conclude that l-Arg competes against ThT for binding sites on BSA amyloid-like fibrils, leading to biased results in ThT fluorescence measurements. Moreover, the use of ThT fluorescence assay to screen for potential inhibitors against amyloid fibrillation can give misleading results.     

Monitoring the reaction of carbachol with acetylcholinesterase by thioflavin T fluorescence and acetylthiocholine hydrolysis

Acetylcholinesterase (AChE) contains a narrow and deep active site gorge with two sites of ligand binding, an acylation site (or A-site) at the base of the gorge and a peripheral site (or P-site) near the gorge entrance. The P-site contributes to catalytic efficiency by transiently binding substrates on their way to the acylation site, where a short-lived acyl enzyme intermediate is produced. Carbamates are very poor substrates that, like other AChE substrates, form an initial enzyme-substrate complex and proceed to an acylated enzyme intermediate which is then hydrolyzed. However, the hydrolysis of the carbamoylated enzyme is slow enough to resolve the acylation and deacylation steps on the catalytic pathway. Here we show that the reaction of carbachol (carbamoylcholine) with AChE can be monitored both with acetylthiocholine as a reporter substrate and with thioflavin T as a fluorescent reporter group. The fluorescence of thioflavin T is strongly enhanced when it binds to the P-site of AChE, and this fluorescence is partially quenched when a second ligand binds to the A-site to form a ternary complex. These fluorescence changes allow not only the monitoring of the course of the carbamoylation reaction but also the determination of carbachol affinities for the A- and P-sites.     

Flow cytometric purification of Alzheimer's disease amyloid plaque core protein using thioflavin T

Amyloid plaque core protein (APCP) of Alzheimer's disease obtained from brain tissue homogenate is difficult to recover in pure form, primarily because of contaminating lipofuscin (LF) granules. Thioflavin T, a fluorescent dye previously used to stain amyloid, was found to bind to APCP but not to lipofuscin. The latter, however, is autofluorescent. Fluorometric studies showed that at 370 nm excitation APCP has a maximal emission at 418 nm, whereas the autofluorescent LP has a maximal emission at 450 nm. This difference in emission permitted the use of a flow cytometer-sorter (FACS 440) for purification of APCP. APCP particles fluoresced distinctly from LF granules on the log blue fluorescence parameter. The two entities were sorted using forward light scatter versus fluorescence. A collection apparatus was designed and prepared to facilitate the collection of large volumes of sheath fluid and particles and to minimize fragmentation of particles during the collection process. The sorted APCP fraction was 98% pure. This work demonstrates how old dyes can be used to perform new tricks and provide a useful method for separating complex protein.     

Controlling amyloid fibril formation by partial stirring

Many proteins undergoe self‐assembly into fibrillar structures known as amyloid fibrils. During the self‐assembly process, related structures known as spherulites can be formed. Herein we report a facile method where the balance between amyloid fibrils and spherulites can be controlled by stirring of the reaction mixture during the initial stages of the self‐assembly process. Moreover, we report how this methodology can be used to prepare non‐covalently functionalized amyloid fibrils. By stirring the reaction mixture continuously or for a limited time during the lag phase, the fibril length, and hence the propensity to form liquid crystalline phases, can be influenced. This phenomena is utilized in order to prepare films consisting of aligned protein fibrils incorporating the laser dye Nile red. The resulting films display polarized Nile red fluorescence. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 249–259, 2016.     

Fluorometric determination of amyloid fibrils in vitro using the fluorescent dye, thioflavin T1

We used a fluorometric method to examine amyloid fibrils, in vitro. These fibrils in the case of both murine senile and secondary amyloidosis were purified to apparent homogeneity from the water-suspended fraction of the liver of senescence-accelerated mouse, using sucrose density ultracentrifugation, and then the following assays were performed. In the absence of amyloid fibrils, thioflavine T fluoresced faintly at the excitation and emission maxima of 350 and 438 nm, respectively. In the presence of amyloid fibrils, thioflavine T fluoresced brightly at the excitation and emission maxima of 450 and 482 nm, respectively, and the fluorescence change was linear from 0 to 2.0 micrograms/ml amyloid fibrils. This fluorescence was maximal around pH 9.0. Fluorescence intensity in the presence of a constant amount of amyloid fibrils reached a plateau with increase in the thioflavine T concentration. Normal high density lipoproteins which contain apo A-II, the precursor of amyloid fibrils in murine senile amyloidosis, and acute phase high density lipoproteins which contain serum amyloid protein A, the precursor of amyloid fibrils in secondary amyloidosis, showed little fluorescence. The fluorescence was considerably diminished when structure of the amyloid fibrils was disrupted by guanidine-HCl treatment. This method will be useful for the determination of amyloid fibrils in vitro.     

Heterogeneous amylin fibril growth mechanisms imaged by total internal reflection fluorescence microscopy

Total internal reflection fluorescence microscopy has been used to visualize the fibrillization of amylin, a hormone which in aggregated forms plays a role in type 2 diabetes pathology. Data were obtained at acidic pH where fibrillization is hindered by the charging of histidine 18 and at slightly basic pH where the loss of charge on the histidine promotes aggregation. The experiments show three types of aggregate growth processes. In the earliest steps globular seeds are formed with some expanding radially during the course of the reaction. The dimensions of the globular seeds as well as their staining with the amyloid-specific dye thioflavin T indicate that they are plaques of short fibrils. The next species observed are fibrils that invariably grow from large globular seeds or smaller punctate granules. Fibril elongation appears to be unidirectional, although in some cases multiple fibrils radiate from a single seed or granule. After fibrils are formed, some show an increase in fluorescence intensity that we attribute to the growth of new fibrils alongside those previously formed. All three aggregation processes are suggestive of secondary (heterogeneous) nucleation mechanisms in which nucleation occurs on preformed fibrils. Consistently, electron micrographs show changes in fibril morphology well after fibrils are first formed, and the growth processes observed by fluorescence microscopy occur after the corresponding solution reactions have reached an initial apparent plateau. Taken together, the results highlight the importance of secondary nucleation in the fibrillization of amylin, as this could provide a pathway to continue fibril growth once an initial population of fibrils is established.     

Real-time and single fibril observation of the formation of amyloid beta spherulitic structures

In Alzheimer disease, amyloid beta, a 39-43-residue peptide produced by cleavage from a large amyloid precursor protein, undergoes conformational change to form amyloid fibrils and deposits as senile amyloid plaques in the extracellular cerebral cortices of the brain. However, the mechanism of how the intrinsically linear amyloid fibrils form spherical senile plaques is unknown. With total internal reflection fluorescence microscopy combined with the use of thioflavin T, an amyloid-specific fluorescence dye, we succeeded in observing the formation of the senile plaque-like spherulitic structures with diameters of around 15 microm on the chemically modified quartz surface. Real-time observation at a single fibrillar level revealed that, in the absence of tight contact with the surface, the cooperative and radial growth of amyloid fibrils from the core leads to a huge spherulitic structure. The results suggest the underlying physicochemical mechanism of senile plaque formation, essential for obtaining insight into prevention of Alzheimer disease.     

Aromatic interactions are not required for amyloid fibril formation by islet amyloid polypeptide but do influence the rate of fibril formation and fibril morphology

Amyloid formation has been implicated in a wide range of human diseases, and a diverse set of proteins is involved. There is considerable interest in elucidating the interactions which lead to amyloid formation and which contribute to amyloid fibril stability. Recent attention has been focused upon the potential role of aromatic-aromatic and aromatic-hydrophobic interactions in amyloid formation by short to midsized polypeptides. Here we examine whether aromatic residues are necessary for amyloid formation by islet amyloid polypeptide (IAPP). IAPP is responsible for the formation of islet amyloid in type II diabetes which is thought to play a role in the pathology of the disease. IAPP is 37 residues in length and contains three aromatic residues, Phe-15, Phe-23, and Tyr-37. Structural models of IAPP amyloid fibrils postulate that Tyr-37 is near one of the phenylalanine residues, and it is known that Tyr-37 interacts with one of the phenylalanines during fibrillization; however, it is not known if aromatic-aromatic or aromatic-hydrophobic interactions are absolutely required for amyloid formation. An F15L/F23L/Y37L triple mutant (IAPP-3XL) was prepared, and its ability to form amyloid was tested. CD, thioflavin binding assays, AFM, and TEM measurements all show that the triple leucine mutant readily forms amyloid fibrils. The substitutions do, however, decrease the rate of fibril formation and alter the tendency of fibrils to aggregate. Thus, while aromatic residues are not an absolute requirement for amyloid formation by IAPP, they do play a role in the fibril assembly process.     

Disassembly of amyloid beta-protein fibril by basement membrane components

Amyloid beta-protein (A3) fibril in senile plaque may be related to the pathogenesis of Alzheimer's disease (AD). Basement membrane (BM) components are associated with the plaques in AD brain. It suggests that the BM components may play an important role in the deposition of the plaque. We investigated the potential of BM components, such as type IV collagen (collagen IV) and entactin, to induce disassembly of preformed Abeta1-42 (Abeta42) fibrils in direct comparison to laminin. Thioflavin T assays revealed that these BM components disrupted preformed Abeta42 fibrils in a dose-dependent manner. The high concentration of BM components, 100 microg/mL laminin, 50 microg/mL collagen IV and 50 microg/mL entactin, had most effect on disassembly of preformed Abeta42 fibrils (Molar ratio; Abeta42:laminin = 90:1, Abeta42:collagen IV = 34:1, Abeta42:entactin = 20:1). Circular dichroism spectroscopy data indicated that the high concentration of BM components induced structural transition in Abeta42 from beta-sheet to random structures. These results suggest that collagen IV and entactin, as well as laminin, are effective inducers of disassembly of Abeta42 fibrils. The ability of these BM components to induce random structures may be linked to the disassembly of preformed Abeta42 fibrils.     

Fluorescence quantum yield of thioflavin T in rigid isotropic solution and incorporated into the amyloid fibrils

In this work, the fluorescence of thioflavin T (ThT) was studied in a wide range of viscosity and temperature. It was shown that ThT fluorescence quantum yield varies from 0.0001 in water at room temperature to 0.28 in rigid isotropic solution (T/η→0). The deviation of the fluorescence quantum yield from unity in rigid isotropic solution suggests that fluorescence quantum yield depends not only on the ultra-fast oscillation of ThT fragments relative to each other in an excited state as was suggested earlier, but also depends on the molecular configuration in the ground state. This means that the fluorescence quantum yield of the dye incorporated into amyloid fibrils must depend on its conformation, which, in turn, depends on the ThT environment. Therefore, the fluorescence quantum yield of ThT incorporated into amyloid fibrils can differ from that in the rigid isotropic solution. In particular, the fluorescence quantum yield of ThT incorporated into insulin fibrils was determined to be 0.43. Consequently, the ThT fluorescence quantum yield could be used to characterize the peculiarities of the fibrillar structure, which opens some new possibilities in the ThT use for structural characterization of the amyloid fibrils.     

Role of elongation and secondary pathways in S6 amyloid fibril growth

The concerted action of a large number of individual molecular level events in the formation and growth of fibrillar protein structures creates a significant challenge for differentiating between the relative contributions of different self-assembly steps to the overall kinetics of this process. The characterization of the individual steps is, however, an important requirement for achieving a quantitative understanding of this general phenomenon which underlies many crucial functional and pathological pathways in living systems. In this study, we have applied a kinetic modeling approach to interpret experimental data obtained for the aggregation of a selection of site-directed mutants of the protein S6 from Thermus thermophilus. By studying a range of concentrations of both the seed structures, used to initiate the reaction, and of the soluble monomer, which is consumed during the growth reaction, we are able to separate unambiguously secondary pathways from primary nucleation and fibril elongation. In particular, our results show that the characteristic autocatalytic nature of the growth process originates from secondary processes rather than primary nucleation events, and enables us to derive a scaling law which relates the initial seed concentration to the onset of the growth phase.     

Ultrasonication-dependent acceleration of amyloid fibril formation

Amyloid fibrils, similar to crystals, form through nucleation and growth. Because of the high free-energy barrier of nucleation, the spontaneous formation of amyloid fibrils occurs only after a long lag phase. Ultrasonication is useful for inducing amyloid nucleation and thus for forming fibrils, while the use of a microplate reader with thioflavin T fluorescence is suitable for detecting fibrils in many samples simultaneously. Combining the use of ultrasonication and microplate reader, we propose an efficient approach to studying the potential of proteins to form amyloid fibrils. With β₂-microglobulin, an amyloidogenic protein responsible for dialysis-related amyloidosis, fibrils formed within a few minutes at pH 2.5. Even under neutral pH conditions, fibrils formed after a lag time of 1.5 h. The results propose that fibril formation is a physical reaction that is largely limited by the high free-energy barrier, which can be effectively reduced by ultrasonication. This approach will be useful for developing a high-throughput assay of the amyloidogenicity of proteins.     

Inhibition of amyloid fibril formation and cytotoxicity by hydroxyindole derivatives

Gaining insight into the mechanism of amyloid fibril formation, the hallmark of multiple degenerative syndromes of unrelated origin, and exploring novel directions of inhibition are crucial for preventing disease development. Specific interactions between aromatic moieties were suggested to have a key role in the recognition and self-assembly processes leading to the formation of amyloid fibrils by several amyloidogenic polypeptides, including the beta-amyloid polypeptide associated with Alzheimer's disease. Our finding of the high-affinity molecular recognition and intense amyloidogenic potential of tryptophan-containing peptide fragments led to the hypothesis that screening for indole derivatives might lead to the identification of potential inhibitors of amyloid formation. Such inhibitors could mediate specific recognition processes without allowing further growth of the well-ordered amyloid chain. Using fluorescence spectroscopy, atomic force microscopy, and electron microscopy to screen 29 indole derivatives, we identified three potent inhibitors: indole-3-carbinol (I3C), 3-hydroxyindole (3HI), and 4-hydroxyindole (4HI). The latter, a simple low-molecular weight aromatic compound, was the most effective, completely abrogating not only the formation of aggregated structures by Abeta but also the cytotoxic activity of aggregated Abeta toward cultured cells. The results of this study provide further experimental support for the paradigm of amyloid inhibition by heteroaromatic interaction and point to indole derivatives as a simple molecular platform for the development of novel fibrillization inhibitors.     

The association of amyloid P-component (AP) with the amyloid fibril: an updated method for amyloid fibril protein isolation

An amyloid fibril isolation procedure is proposed which uses citrate as well as saline washes to dissociate the calcium dependent linkage of amyloid P-component (AP) from the amyloid fibril. In two amyloid rich tissues, the amount of AP was quantitated in each saline and citrate wash and totalled 13.8% and 20.8% of the amyloid fibrils isolated. The amount of AP removed from these and 22 additional amyloid rich tissues was greater than had previously been recognized. AP protein was present in tissue only when amyloid fibrils were present. It could not be found in normal non-amyloidotic tissue, nor could it be found in tissue sediment after the fibrils were removed.     

Direct observation of minimum-sized amyloid fibrils using solution NMR spectroscopy

It is challenging to investigate the structure and dynamics of amyloid fibrils at the residue and atomic resolution because of their high molecular weight and heterogeneous properties. Here, we used solution nuclear magnetic resonance (NMR) spectroscopy to characterize the conformation and flexibility of amyloid fibrils of β2-microglobulin (β2m), for which direct observation of solution NMR could not be made. Ultrasonication led to fragmentation producing a solution of minimum-sized fibrils with a molecular weight of around 6 MDa. In 1H-15N heteronuclear single-quantum correlation measurements, five signals, derived from N-terminal residues (i.e., Ile1, Gln2, Arg3, Thr4, and Lys6), were newly detected. Signal strength decreased with the distance from the N-terminal end. Capping experiments with the unlabeled β2m monomer indicated that the signals originated from molecules located inside the fibrils. Ultrasonication makes the residues with moderate flexibility observable by reducing size of the fibrils. Thus, solution NMR measurements of ultrasonicated fibrils will be promising for studying the structure and dynamics of fibrils.