Cloning, sequencing, and characterization of a heat- and alkali-stable type I pullulanase from Anaerobranca gottschalkii

The gene encoding a type I pullulanase was identified from the genome sequence of the anaerobic thermoalkaliphilic bacterium Anaerobranca gottschalkii. In addition, the homologous gene was isolated from a gene library of Anaerobranca horikoshii and sequenced. The proteins encoded by these two genes showed 39% amino acid sequence identity to the pullulanases from the thermophilic anaerobic bacteria Fervidobacterium pennivorans and Thermotoga maritima. The pullulanase gene from A. gottschalkii (encoding 865 amino acids with a predicted molecular mass of 98 kDa) was cloned and expressed in Escherichia coli strain BL21(DE3) so that the protein did not have the signal peptide. Accordingly, the molecular mass of the purified recombinant pullulanase (rPulAg) was 96 kDa. Pullulan hydrolysis activity was optimal at pH 8.0 and 70 degrees C, and under these physicochemical conditions the half-life of rPulAg was 22 h. By using an alternative expression strategy in E. coli Tuner(DE3)(pLysS), the pullulanase gene from A. gottschalkii, including its signal peptide-encoding sequence, was cloned. In this case, the purified recombinant enzyme was a truncated 70-kDa form (rPulAg'). The N-terminal sequence of purified rPulAg' was found 252 amino acids downstream from the start site, presumably indicating that there was alternative translation initiation or N-terminal protease cleavage by E. coli. Interestingly, most of the physicochemical properties of rPulAg' were identical to those of rPulAg. Both enzymes degraded pullulan via an endo-type mechanism, yielding maltotriose as the final product, and hydrolytic activity was also detected with amylopectin, starch, beta-limited dextrins, and glycogen but not with amylose. This substrate specificity is typical of type I pullulanases. rPulAg was inhibited by cyclodextrins, whereas addition of mono- or bivalent cations did not have a stimulating effect. In addition, rPulAg' was stable in the presence of 0.5% sodium dodecyl sulfate, 20% Tween, and 50% Triton X-100. The pullulanase from A. gottschalkii is the first thermoalkalistable type I pullulanase that has been described.     

Cloning and sequence of a type I pullulanase from an extremely thermophilic anaerobic bacterium,Caldicellulosiruptor saccharolyticus

A gene coding for a pullulanase from the obligately anaerobic, extremely thermophilic bacterium Caldicellulosiruptor saccharolyticus has been cloned in Escherichia coli. It consists of an open reading frame (pulA) of 2478 bp which codes for an enzyme of 95 732 Da and is flanked by two other open reading frames. A truncated version of the gene which lacks 381 bp of 5′-sequence also has pullulanase activity and it appears that the amino-terminal portion of the gene is not essential for either activity or thermostability. Amino acid sequence comparisons with other published amylases and pullulanases showed that it possesses homology to the four key regions common to these enzymes.     

Expression and biochemical characterization of a novel type I pullulanase from <Emphasis Type="Italic">Bacillus megaterium</Emphasis>

Objectives

To identify novel pullulanases from microorganisms and to investigate their biochemical characterizations.

Results

A novel pullulanase gene (BmPul) from Bacillus megaterium WW1210 was cloned and heterologously expressed in Escherichia coli. The gene has an ORF of 2814 bp encoding 937 amino acids. The recombinant pullulanase (BmPul) was purified to homogeneity and biochemically characterized. BmPul has an MW of approx. 112 kDa as indicated by SDS-PAGE. Optimum conditions were at 55 °C and pH 6.5. The enzyme was stable below 40 °C and from pH 6.5?8.5. The Km values of BmPul towards pullulan and amylopectin were 3.3 and 3.6 mg/ml, respectively. BmPul hydrolyzed pullulan to yield mainly maltotriose, indicating that it should be a type I pullulanase.

Conclusions

A novel type I pullulanase from Bacillus megaterium was identified, heterologously expressed and biochemically characterized. Its properties makes this enzyme as a good candidate for the food industry.

     

A novel type I thermostable pullulanase isolated from a thermophilic starch enrichment culture

In this paper we report identification, cloning and characterization of a novel thermostable pullulanase type I. Pullulanase AmyA1 was detected in a sample of extracellular proteins of thermophilic enrichment culture, growing on starch. The zone of enzymatic activity in zymogram was aligned with the corresponding band on the equivalent gel without substrate. The band was excised from SDS/polyacrylamide gel and subjected to liquid chromatography/mass spectrometry (LC/MS) analysis. LC/MS-based analysis identified thermostable pullulanases, homologues to type I pullulanases of Geobacillus thermodenitrificans NG80-2 and Geobacillus sp. G11MC16. Nucleotide sequences of these two pullulanases were used for design of primers for PCR with DNA from enrichment culture, leaded to 2181 bp PCR product, coding a 726 amino acids protein, named pullulanase AmyA1. Molecular weight of AmyA1 was calculated to be 81.7 kDa. AmyA1 was cloned and expressed in Escherichia coli. Recombinant pullulanase was purified by two chromatographic separation steps. Pullulanase AmyA1 was active against pullulan, glycogen and soluble starch. It was active in the temperature range of 4–95°C, optimum temperature was determined to be 60°C. The highest activity of the recombinant pullulanase was observed at pH 6. Divalent cations Mg²⁺ and Mn²⁺ as well as dithiothreitol, Brij 35 and Brij 58 had a stimulating effect on the enzymatic activity. Pullulanase AmyA1 was stable during incubation in the presence of 4 M urea. After removal of the His-tag, addition of Ca²⁺ stimulated activity of the enzyme suggesting the native pullulanase activity to be dependent on Ca²⁺. Thermostability of AmyA1 was not enhanced by the addition of Ca²⁺.     

Characterization of an Extremely Thermostable Restriction Enzyme, PspGI, from a Pyrococcus Strain and Cloning of the PspGI Restriction-Modification System in Escherichia coli

An extremely thermostable restriction endonuclease, PspGI, was purified from Pyrococcus sp. strain GI-H. PspGI is an isoschizomer of EcoRII and cleaves DNA before the first C in the sequence 5′ ^CCWGG 3′ (W is A or T). PspGI digestion can be carried out at 65 to 85°C. To express PspGI at high levels, the PspGI restriction-modification genes (pspGIR and pspGIM) were cloned in Escherichia coli. M.PspGI contains the conserved sequence motifs of α-aminomethyltransferases; therefore, it must be an N4-cytosine methylase. M.PspGI shows 53% similarity to (44% identity with) its isoschizomer, M.MvaI from Micrococcus variabilis. In a segment of 87 amino acid residues, PspGI shows significant sequence similarity to EcoRII and to regions of SsoII and StyD4I which have a closely related recognition sequence (5′ ^CCNGG 3′). PspGI was expressed in E. coli via a T7 expression system. Recombinant PspGI was purified to near homogeneity and had a half-life of 2 h at 95°C. PspGI remained active following 30 cycles of thermocycling; thus, it can be used in DNA-based diagnostic applications.     

Pullulanase type I from Fervidobacterium pennavorans Ven5: cloning, sequencing, and expression of the gene and biochemical characterization of the recombinant enzyme

The gene encoding the type I pullulanase from the extremely thermophilic anaerobic bacterium Fervidobacterium pennavorans Ven5 was cloned and sequenced in Escherichia coli. The pulA gene from F. pennavorans Ven5 had 50.1% pairwise amino acid identity with pulA from the anaerobic hyperthermophile Thermotoga maritima and contained the four regions conserved among all amylolytic enzymes. The pullulanase gene (pulA) encodes a protein of 849 amino acids with a 28-residue signal peptide. The pulA gene was subcloned without its signal sequence and overexpressed in E. coli under the control of the trc promoter. This clone, E. coli FD748, produced two proteins (93 and 83 kDa) with pullulanase activity. A second start site, identified 118 amino acids downstream from the ATG start site, with a Shine-Dalgarno-like sequence (GGAGG) and TTG translation initiation codon was mutated to produce only the 93-kDa protein. The recombinant purified pullulanases (rPulAs) were optimally active at pH 6 and 80 degrees C and had a half-life of 2 h at 80 degrees C. The rPulAs hydrolyzed alpha-1,6 glycosidic linkages of pullulan, starch, amylopectin, glycogen, alpha-beta-limited dextrin. Interestingly, amylose, which contains only alpha-1,4 glycosidic linkages, was not hydrolyzed by rPulAs. According to these results, the enzyme is classified as a debranching enzyme, pullulanase type I. The extraordinary high substrate specificity of rPulA together with its thermal stability makes this enzyme a good candidate for biotechnological applications in the starch-processing industry.     

Oligoribonuclease Is Encoded by a Highly Conserved Gene in the 3′-5′ Exonuclease Superfamily

Oligoribonuclease, a 3′-to-5′ exoribonuclease specific for small oligoribonucleotides, was purified to homogeneity from extracts of Escherichia coli. The purified protein is an α2 dimer of 40 kDa. NH₂-terminal sequence analysis of the protein identified the gene encoding oligoribonuclease as yjeR (o204a), a previously reported open reading frame located at 94 min on the E. coli chromosome. However, as a consequence of the sequence information, the translation start site of this open reading frame has been revised. Cloning of yjeR led to overexpression of oligoribonuclease activity, and interruption of the cloned gene with a kanamycin resistance cassette eliminated the overexpression. On the basis of these data, we propose that yjeR be renamed orn. Orthologs of oligoribonuclease are present in a wide range of organisms, extending up to humans.     

Biosynthesis and secretion of pullulanase, a lipoprotein from Klebsiella aerogenes

We constructed, by site-directed mutagenesis, a mutant pullulanase gene in which the cysteine residue in a pentapeptide sequence, Leu16-Leu-Ser-Gly-Cys20 within the NH2-terminal region of pullulanase from Klebsiella aerogenes, is replaced by serine (Ser20). The modification, processing, and subcellular localization of the mutant pullulanase were studied. Labeling studies with [3H]palmitate and immunoprecipitation with mouse antiserum raised against pullulanase showed that the wild form of both the extracellular and intracellular pullulanases contained lipids, whereas the mutant enzyme was not modified with lipids. Only the Cys20 was modified with glyceryl lipids. The bulk of the mutant pullulanase was located in the periplasm, but a portion of the unmodified, mutant pullulanase was secreted into the medium. Mutant pullulanases from the extracellular and the periplasm were purified and their NH2-terminal sequences were determined. Both the mutant pullulanases were cleaved between residues of Ser13 and Leu14 which is 6-amino acid residues upstream of the lipid modified pullulanase cleavage site. This new cleavage was resistant to globomycin, an inhibitor of the prolipoprotein signal peptidase of Escherichia coli. These results indicate that the pentapeptide sequence plays an important role in maturation and translocation of pullulanase in K. aerogenes. However, the modification of pullulanase with lipids seems to be not essential for export of the enzyme across the outer membrane.     

Detection of RNA nucleoside modifications with the uridine-specific ribonuclease MC1 from Momordica charantia

A codon-optimized recombinant ribonuclease, MC1 is characterized for its uridine-specific cleavage ability to map nucleoside modifications in RNA. The published MC1 amino acid sequence, as noted in a previous study, was used as a template to construct a synthetic gene with a natural codon bias favoring expression in Escherichia coli. Following optimization of various expression conditions, the active recombinant ribonuclease was successfully purified as a C-terminal His-tag fusion protein from E. coli [Rosetta 2(DE3)] cells. The isolated protein was tested for its ribonuclease activity against oligoribonucleotides and commercially available E. coli tRNA^{Tyr I}. Analysis of MC1 digestion products by ion-pairing reverse phase liquid-chromatography coupled with mass spectrometry (IP-RP-LC-MS) revealed enzymatic cleavage of RNA at the 5′-termini of uridine and pseudouridine, but cleavage was absent if the uridine was chemically modified or preceded by a nucleoside with a bulky modification. Furthermore, the utility of this enzyme to generate complementary digestion products to other common endonucleases, such as RNase T1, which enables the unambiguous mapping of modified residues in RNA is demonstrated.     

Cloning, Expression in Escherichia coli, and Characterization of Arabidopsis thaliana UMP/CMP Kinase

A cDNA encoding the Arabidopsis thaliana uridine 5′-monophosphate (UMP)/cytidine 5′-monophosphate (CMP) kinase was isolated by complementation of a Saccharomyces cerevisiae ura6 mutant. The deduced amino acid sequence of the plant UMP/CMP kinase has 50% identity with other eukaryotic UMP/CMP kinase proteins. The cDNA was subcloned into pGEX-4T-3 and expressed as a glutathione S-transferase fusion protein in Escherichia coli. Following proteolytic digestion, the plant UMP/CMP kinase was purified and analyzed for its structural and kinetic properties. The mass, N-terminal sequence, and total amino acid composition agreed with the sequence and composition predicted from the cDNA sequence. Kinetic analysis revealed that the UMP/CMP kinase preferentially uses ATP (Michaelis constant [K_m] = 29 μm when UMP is the other substrate and K_m = 292 μm when CMP is the other substrate) as a phosphate donor. However, both UMP (K_m = 153 μm) and CMP (K_m = 266 μm) were equally acceptable as the phosphate acceptor. The optimal pH for the enzyme is 6.5. P¹, P⁵-di(adenosine-5′) pentaphosphate was found to be a competitive inhibitor of both ATP and UMP.     

Biochemical analysis of the substrate specificity and sequence preference of endonuclease IV from bacteriophage T4, a dC-specific endonuclease implicated in restriction of dC-substituted T4 DNA synthesis

Endonuclease IV encoded by denB of bacteriophage T4 is implicated in restriction of deoxycytidine (dC)-containing DNA in the host Escherichia coli. The enzyme was synthesized with the use of a wheat germ cell-free protein synthesis system, given a lethal effect of its expression in E.coli cells, and was purified to homogeneity. The purified enzyme showed high activity with single-stranded (ss) DNA and denatured dC-substituted T4 genomic double-stranded (ds) DNA but exhibited no activity with dsDNA, ssRNA or denatured T4 genomic dsDNA containing glucosylated deoxyhydroxymethylcytidine. Characterization of Endo IV activity revealed that the enzyme catalyzed specific endonucleolytic cleavage of the 5′ phosphodiester bond of dC in ssDNA with an efficiency markedly dependent on the surrounding nucleotide sequence. The enzyme preferentially targeted 5′-dTdCdA-3′ but tolerated various combinations of individual nucleotides flanking this trinucleotide sequence. These results suggest that Endo IV preferentially recognizes short nucleotide sequences containing 5′-dTdCdA-3′, which likely accounts for the limited digestion of ssDNA by the enzyme and may be responsible in part for the indispensability of a deficiency in denB for stable synthesis of dC-substituted T4 genomic DNA.     

Construction of Deoxyriboaldolase-Overexpressing Escherichia coli and Its Application to 2-Deoxyribose 5-Phosphate Synthesis from Glucose and Acetaldehyde for 2′-Deoxyribonucleoside Production

The gene encoding a deoxyriboaldolase (DERA) was cloned from the chromosomal DNA of Klebsiella pneumoniae B-4-4. This gene contains an open reading frame consisting of 780 nucleotides encoding 259 amino acid residues. The predicted amino acid sequence exhibited 94.6% homology with the sequence of DERA from Escherichia coli. The DERA of K. pneumoniae was expressed in recombinant E. coli cells, and the specific activity of the enzyme in the cell extract was as high as 2.5 U/mg, which was threefold higher than the specific activity in the K. pneumoniae cell extract. One of the E. coli transformants, 10B5/pTS8, which had a defect in alkaline phosphatase activity, was a good catalyst for 2-deoxyribose 5-phosphate (DR5P) synthesis from glyceraldehyde 3-phosphate and acetaldehyde. The E. coli cells produced DR5P from glucose and acetaldehyde in the presence of ATP. Under the optimal conditions, 100 mM DR5P was produced from 900 mM glucose, 200 mM acetaldehyde, and 100 mM ATP by the E. coli cells. The DR5P produced was further transformed to 2′-deoxyribonucleoside through coupling the enzymatic reactions of phosphopentomutase and nucleoside phosphorylase. These results indicated that production of 2′-deoxyribonucleoside from glucose, acetaldehyde, and a nucleobase is possible with the addition of a suitable energy source, such as ATP.     

Functional Characterization of a Newly Identified Group B Streptococcus Pullulanase Eliciting Antibodies Able to Prevent Alpha-Glucans Degradation

Streptococcal pullulanases have been recently proposed as key components of the metabolic machinery involved in bacterial adaptation to host niches. By sequence analysis of the Group B Streptococcus (GBS) genome we found a novel putative surface exposed protein with pullulanase activity. We named such a protein SAP. The sap gene is highly conserved among GBS strains and homologous genes, such as PulA and SpuA, have been described in other pathogenic streptococci. The SAP protein contains two N-terminal carbohydrate-binding motifs, followed by a catalytic domain and a C-terminal LPXTG cell wall-anchoring domain. In vitro analysis revealed that the recombinant form of SAP is able to degrade α-glucan polysaccharides, such as pullulan, glycogen and starch. Moreover, NMR analysis showed that SAP acts as a type I pullulanase. Studies performed on whole bacteria indicated that the presence of α-glucan polysaccharides in culture medium up-regulated the expression of SAP on bacterial surface as confirmed by FACS analysis and confocal imaging. Deletion of the sap gene resulted in a reduced capacity of bacteria to grow in medium containing pullulan or glycogen, but not glucose or maltose, confirming the pivotal role of SAP in GBS metabolism of α-glucans. As reported for other streptococcal pullulanases, we found specific anti-SAP antibodies in human sera from healthy volunteers. Investigation of the functional role of anti-SAP antibodies revealed that incubation of GBS in the presence of sera from animals immunized with SAP reduced the capacity of the bacterium to degrade pullulan. Of interest, anti-SAP sera, although to a lower extent, also inhibited Group A Streptococcus pullulanase activity. These data open new perspectives on the possibility to use SAP as a potential vaccine component inducing functional cross-reacting antibodies interfering with streptococcal infections.     

Purification, Characterization, Gene Cloning, Sequencing, and Overexpression of Aminopeptidase N from Streptococcus thermophilus A

The general aminopeptidase PepN from Streptococcus thermophilus A was purified to protein homogeneity by hydroxyapatite, anion-exchange, and gel filtration chromatographies. The PepN enzyme was estimated to be a monomer of 95 kDa, with maximal activity on N-Lys–7-amino-4-methylcoumarin at pH 7 and 37°C. It was strongly inhibited by metal chelating agents, suggesting that it is a metallopeptidase. The activity was greatly restored by the bivalent cations Co²⁺, Zn²⁺, and Mn²⁺. Except for proline, glycine, and acidic amino acid residues, PepN has a broad specificity on the N-terminal amino acid of small peptides, but no significant endopeptidase activity has been detected. The N-terminal and short internal amino acid sequences of purified PepN were determined. By using synthetic primers and a battery of PCR techniques, the pepN gene was amplified, subcloned, and further sequenced, revealing an open reading frame of 2,541 nucleotides encoding a protein of 847 amino acids with a molecular weight of 96,252. Amino acid sequence analysis of the pepN gene translation product shows high homology with other PepN enzymes from lactic acid bacteria and exhibits the signature sequence of the zinc metallopeptidase family. The pepN gene was cloned in a T7 promoter-based expression plasmid and the 452-fold overproduced PepN enzyme was purified to homogeneity from the periplasmic extract of the host Escherichia coli strain. The overproduced enzyme showed the same catalytic characteristics as the wild-type enzyme.     

A candidate prostate cancer susceptibility gene encodes tRNA 3' processing endoribonuclease

tRNA 3′ processing endoribonuclease (3′ tRNase) is an enzyme responsible for the removal of a 3′ trailer from precursor tRNA (pre-tRNA). We purified ~85 kDa 3′ tRNase from pig liver and determined its partial sequences. BLAST search of them suggested that the enzyme was the product of a candidate human prostate cancer susceptibility gene, ELAC2, the biological function of which was totally unknown. We cloned a human ELAC2 cDNA and expressed the ELAC2 protein in Escherichia coli. The recombinant ELAC2 was able to cleave human pre-tRNA^Arg efficiently. The 3′ tRNase activity of the yeast ortholog YKR079C was also observed. The C-terminal half of human ELAC2 was able to remove a 3′ trailer from pre-tRNA^Arg, while the N‐terminal half failed to do so. In the human genome exists a gene, ELAC1, which seems to correspond to the C-terminal half of 3′ tRNase from ELAC2. We showed that human ELAC1 also has 3′-tRNase activity. Furthermore, we examined eight ELAC2 variants that seem to be associated with the occurrence of prostate cancer for 3′-tRNase activity. Seven ELAC2 variants which contain one to three amino acid substitutions showed efficient 3′-tRNase activities, while one truncated variant, which lacked a C-terminal half region, had no activity.     

Identification,Purification, and Characterization of a Novel Amino Acid Racemase,Isoleucine 2-Epimerase,from Lactobacillus Species

Accumulation of d-leucine, d-allo-isoleucine, and d-valine was observed in the growth medium of a lactic acid bacterium, Lactobacillus otakiensis JCM 15040, and the racemase responsible was purified from the cells and identified. The N-terminal amino acid sequence of the purified enzyme was GKLDKASKLI, which is consistent with that of a putative γ-aminobutyrate aminotransferase from Lactobacillus buchneri. The putative γ-aminobutyrate aminotransferase gene from L. buchneri JCM 1115 was expressed in recombinant Escherichia coli and then purified to homogeneity. The enzyme catalyzed the racemization of a broad spectrum of nonpolar amino acids. In particular, it catalyzed at high rates the epimerization of l-isoleucine to d-allo-isoleucine and d-allo-isoleucine to l-isoleucine. In contrast, the enzyme showed no γ-aminobutyrate aminotransferase activity. The relative molecular masses of the subunit and native enzyme were estimated to be about 49 kDa and 200 kDa, respectively, indicating that the enzyme was composed of four subunits of equal molecular masses. The K_m and V_max values of the enzyme for l-isoleucine were 5.00 mM and 153 μmol·min⁻¹·mg⁻¹, respectively, and those for d-allo-isoleucine were 13.2 mM and 286 μmol·min⁻¹·mg⁻¹, respectively. Hydroxylamine and other inhibitors of pyridoxal 5′-phosphate-dependent enzymes completely blocked the enzyme activity, indicating the enzyme requires pyridoxal 5′-phosphate as a coenzyme. This is the first evidence of an amino acid racemase that specifically catalyzes racemization of nonpolar amino acids at the C-2 position.     

Evidence for horizontal transfer of SsuDAT1I restriction-modification genes to the Streptococcus suis genome

Different strains of Streptococcus suis serotypes 1 and 2 isolated from pigs either contained a restriction-modification (R-M) system or lacked it. The R-M system was an isoschizomer of Streptococcus pneumoniae DpnII, which recognizes nucleotide sequence 5′-GATC-3′. The nucleotide sequencing of the genes encoding the R-M system in S. suis DAT1, designated SsuDAT1I, showed that the SsuDAT1I gene region contained two methyltransferase genes, designated ssuMA and ssuMB, as does the DpnII system. The deduced amino acid sequences of M.SsuMA and M.SsuMB showed 70 and 90% identity to M.DpnII and M.DpnA, respectively. However, the SsuDAT1I system contained two isoschizomeric restriction endonuclease genes, designated ssuRA and ssuRB. The deduced amino acid sequence of R.SsuRA was 49% identical to that of R.DpnII, and R.SsuRB was 72% identical to R.LlaDCHI of Lactococcus lactis subsp. cremoris DCH-4. The four SsuDAT1I genes overlapped and were bounded by purine biosynthetic gene clusters in the following gene order: purF-purM-purN-purH-ssuMA-ssuMB-ssuRA-ssuRB-purD-purE. The G+C content of the SsuDAT1I gene region (34.1%) was lower than that of the pur region (48.9%), suggesting horizontal transfer of the SsuDAT1I system. No transposable element or long-repeat sequence was found in the flanking regions. The SsuDAT1I genes were functional by themselves, as they were individually expressed in Escherichia coli. Comparison of the sequences between strains with and without the R-M system showed that only the region from 53 bp upstream of ssuMA to 5 bp downstream of ssuRB was inserted in the intergenic sequence between purH and purD and that the insertion target site was not the recognition site of SsuDAT1I. No notable substitutions or insertions could be found, and the structures were conserved among all the strains. These results suggest that the SsuDAT1I system could have been integrated into the S. suis chromosome by an illegitimate recombination mechanism.     

Characteristics of thermostable pullulanase from Bacillus stearothermophilus and the nucleotide sequence of the gene

Thermostable pullulanase was purified to homogeneity on sodium dodecyl sulfate-polyacrylamide gel from the culture supernatant of Bacillus stearothermophilus TRS128. However, multiformity of the pullulanase was suggested by activity staining on a pullulan-reactive red plate. The thermostability of the enzyme was tested. In the presence of Ca²⁺, the optimum temperature of the pullulanase was 75°C, and nearly 100% of the enzyme activity was retained even after treatment at 68°C for 60 min. Since the thermostable pullulanase gene (pulT) has been cloned, the nucleotide sequence was determined. Although the DNA sequence revealed only one large open reading frame, two possible pairs of SD sequence and initiation codon were found in the frame. To analyze the regulatory region, several mutations (deletion, insertion and substitution of nucleotides) were introduced in the flanking region of pulT, using site-directed mutagenesis. A putative promoter, SD sequence and initiation codon were inferred. The pulT gene was composed of 1974 bases and 658 amino acid residues (molecular weight 75,375). The deduced amino acid sequence of the thermostable pullulanase exhibited a fairly low homology with that of the thermolabile pullulanase from Klebsiella aerogenes. However, four consensus sequences containing catalytic and/or substrate binding sites for amylolytic enzymes were also found in the thermostable pullulanase and the thermolabile enzyme.     

Characterisation of a thermoalkali-stable cyclodextrin glycosyltransferase from the anaerobic thermoalkaliphilic bacterium Anaerobranca gottschalkii

The thermoalkaliphilic anaerobic bacterium Anaerobranca gottschalkii produces an extracellular CGTase when grown on starch at 55°C and pH 9.0. The gene encoding this CGTase was cloned and successfully expressed in Escherichia coli. It encodes a protein consisting of 721 amino acids with a signal sequence of 34 amino acids. On SDS–polyacrylamide gels, the purified CGTase from A. gottschalkii displayed the expected molecular mass of 78 kDa. The recombinant enzyme was purified with a yield of 13.5% and displayed a specific activity of 210 units/mg. This CGTase, which represents the first report of a CGTase from an anaerobic thermoalkaliphile, was active at a broad range of temperature and pH, namely 55–70°C and pH 5–10. It completely converted amylose, amylopectin and native starch to cyclodextrins, preferentially -cyclodextrin. With a longer incubation period, the -cyclodextrin to -cyclodextrin ratio declined. Variations in substrate type and concentration influenced the product pattern. Increasing the substrate concentration (0.5–20.0%) and glucans containing branching points (-1,6 glycosidic linkages) shifted the product pattern to: -cyclodextin > -cyclodextrin > -cyclodextrin. In addition to these cyclodextrins, larger cyclodextrins (>8 glucose units) were formed in the initial reaction period. The CGTase was stabilised against thermal inactivation by calcium ions and high substrate concentrations; and 5 mM of CaCl₂ shifted the apparent melting point of the enzyme from 60°C to 69°C.Dedicated to Prof. Dr. Hans G. Schlegel on the occasion of his 80th birthday.