3-Methylindole production is regulated in Clostridium scatologenes ATCC 25775

Aims:  3-Methylindole (3-MI) is a degradation product of l -tryptophan and is both an animal waste malodorant and threat to ruminant health. Culture conditions influencing 3-MI production in Clostridium scatologenes ATCC 25775 were investigated.
Methods and Results:  Extracellular 3-MI levels in cells cultured in brain heart infusion (BHI) medium (pH 7·0) at 33°C and 37°C for 72 h were 907 ± 38 and 834 ± 121  μ mol l⁻¹, respectively. Cells cultured in tryptone-yeast (TY) extract medium at 37°C for 48 h produced 104 ± 86  μ mol l⁻¹ 3-MI; however, addition of 1 mmol l⁻¹  l -tryptophan failed to increase extracellular levels (113 ± 50  μ mol l⁻¹ 3-MI). Specific activity of indole acetic acid decarboxylase measured in BHI, TY and TY plus 1 mmol l⁻¹ tryptophan-grown cells displayed 35-, 33- and 76-fold higher levels than in semi-defined medium-grown cells.
Conclusions:  When cultured in rich medium, at 33°C or 37°C and pH 7·0, Cl. scatologenes ATCC 25775 optimally produced 3-MI. Addition of l- tryptophan to medium did not lead to significant increases in extracellular 3-MI levels. Whole cell assays indicate growth in rich medium significantly up-regulated 3-MI production.
Significance and Impact of the Study:  Information presented here may prove useful in understanding what factors influence 3-MI production in malodorous animal wastes.     

Effects of feeding and induction strategy on the production of BmR1 antigen in recombinant E. coli

Aim:  To investigate the effects of feeding and induction strategies on the production of Bm R1 recombinant antigen.
Methods and Results:  Fed-batch fermentation was studied with respect to the specific growth rate and mode of induction to assess the growth potential of the bacteria in a bioreactor and to produce high yield of Bm R1 recombinant antigen. Cells were grown at a controlled specific growth rate (μ_set) during pre-induction, followed by constant feeding postinduction. The highest biomass (24·3 g l⁻¹) was obtained during fed-batch process operated at μ_set of 0·15 h⁻¹, whereby lower μ_set (0·075 h⁻¹) gave the highest protein production (9·82 mg l⁻¹). The yield of Bm R1 was increased by 1·2-fold upon induction with 1 mmol l⁻¹ IPTG (isopropyl-β- d -thiogalactoside) compared to using 5 mmol l⁻¹ and showed a further 3·5-fold increase when the culture was induced twice at the late log phase.
Conclusions:  Combination of feeding at a lower μ_set and twice induction with 1 mmol l⁻¹ IPTG yielded the best result of all variables tested, promising an improved method for Bm R1 production .
Significance and Impact of the Study:  This method can be used to increase the production scale of the Bm R1 recombinant antigen to meet the increasing demand for Brugia Rapid^™, a commercial diagnostic test for detection of brugian filariasis.     

Bactericidal and virucidal activity of the alkalophilic P395D/L241V/T343A mutant of vanadium chloroperoxidase

Aims:  Vanadium chloroperoxidase and its directed evolution mutant P395D/L241V/T343A were investigated for their antibacterial and antiviral potential at slightly alkaline pH and at a H₂O₂ concentration that is low compared to current nonenzymatic formulations.
Methods and Results:  Two bacteria (the Gram-negative Pseudomonas aeruginosa and the Gram-positive Staphylococcus aureus ) and two viruses (the enveloped Herpes Simplex Virus and the nonenveloped Coxsackievirus B4) were incubated with the P395D/L241V/T343A mutant, 10 mmol l⁻¹ H₂O₂ and 100 mmol l⁻¹ Br⁻ at pH 8. Strong microbial reduction was observed and bactericidal and virucidal activities of the mutant were three to six orders of magnitude higher than for the wild-type enzyme.
Conclusions:  The P395D/L241V/T343A mutant of vanadium chloroperoxidase has a broad antimicrobial activity at alkaline conditions.
Significance and Impact of the Study:  For many disinfection formulations, antimicrobial activity at slightly alkaline pH values is required. To date, only the wild-type vanadium chloroperoxidase has been studied for its antibacterial activity, and only at acidic to neutral pH values. Its antiviral activity (e.g. useful for the cleaning of medical equipment) was not studied before. The observed activity for the alkalophilic P395D/L241V/T343A mutant is an important step forward in the application of this robust enzyme as a component in disinfection formulations.     

Inhibition of Listeria monocytogenes by acetate, benzoate and sorbate: weak acid tolerance is not influenced by the glutamate decarboxylase system

Aims:  Weak acids are widely used by the food industry to prevent spoilage and to inhibit the growth of pathogenic micro-organisms. In this study the inhibitory effects of three commonly used weak acids, acetic acid, benzoic acid and sorbic acid, on the growth of Listeria monocytogenes were investigated.
Methods and Results:  In a chemically defined medium at pH 6·4 benzoic acid had the greatest inhibitory effect (50% inhibition of growth at 4 mmol l⁻¹), while acetate was the least inhibitory (50% inhibition of growth at 50 mmol l⁻¹). Mutants lacking either sigmaB (Δ sigB ) or two of the glutamate decarboxylase systems (Δ gadAB ) were used to investigate the contribution these systems make to weak acid tolerance in L. monocytogenes .
Conclusions:  The stress-inducible sigma factor sigmaB (σ^B) was not required for protection against acetate and played only a minor role in tolerating benzoate and sorbate. The glutamate decarboxylase system, which plays an important role in tolerating inorganic acids, played no significant role in the ability of L. monocytogenes to tolerate these weak acids, and neither did the presence of glutamate in the growth medium.
Significance and Impact of the Study:  These results suggest that the effectiveness of weak acid preservatives in food will not be compromised by the presence of glutamate, at least under mildly acidic conditions.     

Effect of alternative treatments on seed-borne Didymella lycopersici in tomato

Aims:  To quantify the phytotoxicity and effect of alternative seed treatments based on acidified nitrite and elicitors of plant resistance (Tillekur and Chitosan) against seed-borne inocula of Didymella lycopersici .
Methods and Results:  Treatments tested were: nitrite [sodium nitrite in citric acid buffer (pH 2)] at 30, 100 and 300 mmol l⁻¹ and three exposure times (10, 20 and 30 min); Tillekur (in water) at 12·5, 25, 50, 100 and 200 mg ml⁻¹; Chitosan (in 0·05% acetic acid) at 2·5, 5, 10 and 50 mg ml⁻¹. Efficacy of treatments was determined in growth chamber experiments. Nitrite at 300 mmol l⁻¹ was completely effective, as was the fungicide, at controlling disease when applied for less than 20 min. Tillekur was as effective as the fungicide postemergence, but proved to be phytotoxic pre-emergence. Chitosan was significantly less effective than the other treatments.
Conclusions:  The high efficacy and low cost of acidified nitrite indicates that it is a suitable alternative to fungicides.
Significance and Impact of the Study:  There is currently a lack of effective seed treatments that can be used in organic and low-input crops. Treatments identified in this study can be considered as an effective alternative to chemical control against seed-borne fungal pathogens.     

Response surface methodology to optimize the nutritional parameters for enhanced production of jasmonic acid by Lasiodiplodia theobromae

Aims:  To find out the cumulative effect of the nutritional parameters and to enhance the production of jasmonic acid (JA) in static fermentation by Lasiodiplodia theobromae using response surface methodology (RSM).
Method and Results:  Malt extract, sucrose, NaNO₃ and MgSO₄.7H₂O were analysed by a 30-trial central composite design using RSM for optimizing their concentrations in the medium and the effect of their mutual interaction on JA production. Sucrose and NaNO₃ were found highly significant in influencing the JA production. Malt extract and MgSO₄.7H₂O showed an effect on the JA production in interaction with other variables. When the optimum values of the parameters obtained through RSM (19·95 g l⁻¹ malt extract, 50 g l⁻¹ sucrose, 7·5 g l⁻¹ NaNO₃ and 3·51 g l⁻¹ MgSO₄.7H₂O) were applied, 32% increase in JA production (299 mg l⁻¹) was observed in comparison with 225 mg l⁻¹ of JA produced with same media components not analysed by RSM and subsequently validated the statistical model.
Conclusions:  Increase in JA production was achieved by optimizing the nutritional parameters.
Significance and Impact of the Study:  This is the first report of using RSM for optimizing a medium for JA production. It resulted in an increase in JA production without augmentation of costly additives.     

Decolorization of reactive dyes by a thermostable laccase produced by Ganoderma lucidum in solid state culture

Dye decolorizing potential of the white rot fungus Ganoderma lucidum KMK2 was demonstrated for recalcitrant textile dyes. G. lucidum produced laccase as the dominant lignolytic enzyme during solid state fermentation (SSF) of wheat bran (WB), a natural lignocellulosic substrate. Crude enzyme shows excellent decolorization activity to anthraquinone dye Remazol Brilliant Blue R (RBBR) without redox mediator whereas diazo dye Remazol Black-5 (RB-5) requires a redox mediator. Polyacrylamide gel electrophoresis (PAGE) of crude enzyme confirms that the laccase enzyme was the major enzyme involved in decolorization of either dyes. Native and SDS-PAGE indicates that the presence of single laccase with molecular weight of 43 kDa. N-Hydroxybenzotriazole (HBT) at a concentration of 1 mM was found as the best redox mediator. RB-5 (50 mg l^−l) was decolorized by 62% and 77.4% within 1 and 2 h, respectively by the crude laccase (25 U ml⁻¹). RBBR (50 mg l^−l) was decolorized by 90% within 20 h, however, it was more efficient in presence of HBT showing 92% decolorization within 2 h. Crude laccase showed high thermostability and maximum decolorization activity at 60 °C and pH 4.0. The decolorization was completely inhibited by the laccase inhibitor sodium azide (0.5 mM). Enzyme inactivation method is a good method which averts the undesirable color formation in the reaction mixture after decolorization. High thermostability and efficient decolorization suggest that this crude enzyme could be effectively used to decolorize the synthetic dyes from effluents.     

Modification of culture conditions for production of the anti-tubercular hirsutellones by the insect pathogenic fungus Hirsutella nivea BCC 2594

Aims:  This work aimed to improve the production of anti-tubercular hirsutellones by the insect pathogenic fungus Hirsutella nivea BCC 2594.
Methods and Results:  The fungus was cultivated under different carbon/nitrogen sources and aerations (shake vs static flasks) to improve the production of the anti-tubercular alkaloids, hirsutellones A–D. Under the basal conditions, static cultivation at 25°C in minimum salt medium, only hirsutellone B and C were detected with maximum concentrations of 139·00 and 18·27 mg l⁻¹. Substitution of fructose for glucose and peptone for yeast extract increased the titres of hirsutellones A, B and C about two- to threefold. However, hirsutellone D was not detected in this medium. Culture agitation induced the production of hirsutellone D. As a result, the significant amounts of hirsutellones A–D were obtained with the concentration of 29·93, 169·63, 22·65 and 15·71 mg l⁻¹ within 15 days.
Conclusions:  Improved titres of hirsutellones in H. nivea BCC 2549 were achieved with an agitated (200 rev min⁻¹) fructose–peptone medium at 25°C.
Significance and Impact of the Study:  Improved yields of hirsutellones B–D will enable medicinal chemistry modifications leading to a development of a potential candidate for tuberculosis therapy.     

Statistical optimization of medium components for extracellular protease production by an extreme haloarchaeon, Halobacterium sp. SP1(1)

Aims:  Optimization of medium components for extracellular protease production by Halobacterium sp. SP1(1) using statistical approach.
Methods and Results:  The significant factors influencing the protease production as screened by Plackett–Burman method were identified as soybean flour and FeCl₃. Response surface methodology such as central composite design was applied for further optimization studies. The concentrations of medium components for higher protease production as optimized using this approach were (g l⁻¹): NaCl, 250; KCl, 2; MgSO₄, 10; tri-Na-citrate, 1·5; soybean flour, 10 and FeCl₃, 0·16. This statistical optimization approach led to production of 69·44 ± 0·811 U ml⁻¹ of protease.
Conclusions:  Soybean flour and FeCl₃ were identified as important factors controlling the production of extracellular protease by Halobacterium sp. SP1(1). The statistical approach was found to be very effective in optimizing the medium components in manageable number of experimental runs with overall 3·9-fold increase in extracellular protease production.
Significance and Impact of the Study:  The present study is the first report on statistical optimization of medium components for production of haloarchaeal protease. The study also explored the possibility of using extracellular protease produced by Halobacterium sp. SP1(1) for various applications like antifouling coatings and fish sauce preparation using cheaper raw material.     

Production and optimization of process parameters for alkaline protease production by a newly isolated Bacillus sp. under solid state fermentation

Production of alkaline protease employing the laboratory isolate, Bacillus sp. under solid state fermentation (SSF) was optimized. The effect of wheat bran and lentil husk was examined. Wheat bran showed highest enzyme production. The appropriate incubation time, inoculum size, moisture level and buffer solution level were determined. Maximum yields of 429.041 and 168.640 U g⁻¹ were achieved by employing wheat bran and lentil husk as substrates in 0.1 M carbonate/bicarbonate buffer at pH 10 with 30 and 40% initial moisture level at 24 h. Inoculum size and buffer solution level were found to be 20 and 25% and 0.5:1 for wheat bran and lentil husk, respectively.     

Brewer's spent grain and corn steep liquor as substrates for cellulolytic enzymes production by Streptomyces malaysiensis

Aims:  To evaluate cellulase production by Streptomyces malaysiensis in submerged fermentation using brewer's spent grain (BSG) and wheat bran (WB) as carbon source, and corn steep liquor (CSL) as nitrogen source, as compared to yeast extract (YE), and partial characterization of the crude enzyme.
Methods and Results:  Maximum cellulase production by Streptomyces malaysiensis (720 U l⁻¹) occurred within 4 days incubation when using a growth medium containing BSG 0·5% (w/v) and CSL1·2% (w/v). CMCases activity showed to be stable over an acidic pH range (2·0–7·0) and in temperatures of 40–60°C. Zymogram indicated three bands of CMCase activity, with different molecular masses.
Conclusion:  S. malaysiensis was able to grow and produce good levels of CMCases using solely brewer's spent grain and corn steep liquor as low-cost substrates, making this strain and these low cost by-product worthy for further investigation, and potentially feasible for biotechnological applications in different areas.
Significance and Impact of the Study:  To our knowledge, this is the first study reporting the use of the low-cost by-products brewer's spent grain and corn steep liquor, as sole substrates for microbial enzyme production.     

Optimization of medium constituents for improved chitinase production by Paenibacillus sp. D1 using statistical approach

Aims:  Statistical optimization of medium components for improved chitinase production by Paenibacillus sp. D1.
Methods and Results:  Urea, K₂HPO₄, chitin and yeast extract were identified as significant components influencing chitinase production by Paenibacillus sp. D1 using Plackett–Burman method. Response surface methodology (central composite design) was applied for further optimization. The concentrations of medium components for improved chitinase production were as follows (g l⁻¹): urea, 0·33; K₂HPO₄, 1·17; MgSO₄, 0·3; yeast extract, 0·65 and chitin, 3·75. This statistical optimization approach led to the production of 93·2 ± 0·58 U ml⁻¹ of chitinase.
Conclusions:  The important factors controlling the production of chitinase by Paenibacillus sp. D1 were identified as urea, K₂HPO₄, chitin and yeast extract. Statistical approach was found to be very effective in optimizing the medium components in manageable number of experimental runs with overall 2·56-fold increase in chitinase production.
Significance and Impact of the Study:  The present investigation provides a report on statistical optimization of medium components for improved chitinase production by Paenibacillus sp. D1. Paenibacillus species are gram-positive, spore-forming bacteria with several PGPR and biocontrol potentials. However, only few reports concerning mycolytic enzyme production especially chitinases are available. Chitinase produced by Paenibacillus sp. D1 represents new source for biotechnological and agricultural use.     

Effects of a synbiotic product on blood antioxidative activity in subjects colonized with Helicobacter pylori

Aim:  To evaluate the impact of the consumption of a synbiotic product on the antioxidative activity markers of blood in asymptomatic H. pylori -colonized persons.
Methods and Results:  Fifty-three healthy adult volunteers without gastric symptoms participated in a randomized, double-blind placebo-controlled study. The crossover consumption of the enterocoated capsules containing antioxidative Lactobacillus fermentum ME-3, Lact. paracasei 8700:2 and Bifidobacterium longum 46 with Raftilose P95 lasted for 3 weeks and did not change the H. pylori colonization. In H. pylori -positive subjects the sera values of total antioxidative status (TAS) were significantly lower compared to H. pylori -negative subjects (0·97 vs 1·05 mmol l⁻¹, P  = 0·008). After the consumption of the synbiotic, TAS values (0·97 vs 1·03 mmol l⁻¹, P  = 0·004) increased, while the ratio between oxidized and reduced glutathione (0·035 vs 0·030, P  = 0·016) decreased in H. pylori -positive subjects.
Conclusions:  The consumption of a synbiotic containing an antioxidative probiotic strain improved the reduced systemic antioxidative activity in H. pylori -colonized asymptomatic subjects.
Significance and Impact of the Study:  A synbiotic product containing an antioxidative probiotic strain may be useful in the reduction of systemic oxidative stress in H. pylori infection.     

Potential of Bacillus sp. to produce polyhydroxybutyrate from biowaste

Aim:  To test the Bacillus strains for their abilities to produce polyhydroxybutyrate (PHB) from different sugars and biowaste (Pea-shells).
Methods and Results:  Six Bacillus strains were checked for their ability to produce PHB from GM2 medium supplemented with different sugars at the rate of 1% (w/v) and from biowaste and GM2 (BW : M) combinations (3 : 7, 1 : 1, 7 : 3). Glucose supplemented GM2 medium resulted in maximum PHB production of 435 mg l⁻¹ constituting 31–62% w/w of the total cell dry mass. Substituting GM2 medium to the extent of 50% with biowaste (pea-shell slurry) resulted in 945–1205 mg l⁻¹ PHB (55–65% w/w). Optimization for additional nitrogen supplementation, inoculum size resulted in a final PHB production of 3010–3370 mg l⁻¹ equivalent to 300 g kg⁻¹ biowaste (dry wt).
Conclusion:  The Bacillus strains were able to produce PHB from biowaste (Pea-shells) as cheap source of substrate.
Significance and Impact of the Study:  This is the first report on usage of pea-shells as feed for PHB production, opening new possibilities for its use for production of PHB and Bacillus as potential candidate for the purpose.     

Physiological impact of sea lice on swimming performance of Atlantic salmon

Atlantic salmon Salmo salar were infected with two levels of sea lice Lepeophtheirus salmonis (0·13 ± 0·02 and 0·02 ± 0·00 sea lice g⁻¹). Once sea lice became adults, the ventral aorta of each fish was fitted with a Doppler cuff to measure cardiac output ( ̇ ), heart rate ( f _H) and stroke volume ( V _S) during swimming. Critical swimming speeds ( U _crit) of fish with higher sea lice numbers [2·1 ± 0·1 BL (body lengths) s⁻¹] were significantly lower ( P  < 0·05) than fish with lower numbers (2·4 ± 0·1 BL s⁻¹) and controls (sham infected, 2·6 ± 0·1 BL s⁻¹). After swimming, chloride levels in fish with higher sea lice numbers (184·4 ± 11·3 mmol l⁻¹) increased significantly (54%) from levels at rest and were significantly higher than fish with fewer lice (142·0 ± 3·7 mmol l⁻¹) or control fish (159·5 ± 3·5 mmol l⁻¹). The f _H of fish with more lice was 9% slower than the other two groups at U _crit. This decrease resulted in ̇ not increasing from resting levels. Sublethal infection by sea lice compromised the overall fitness of Atlantic salmon. The level of sea lice infection used in the present study was lower than has previously been reported to be detrimental to wild Atlantic salmon.     

Mg2+-free buffer elevates transformation efficiency of Vibrio parahaemolyticus by electroporation

Aims:  The ability to transform Vibrio spp. is limited by the extracellular nuclease that their cells secrete. The reported transformation efficiency of this organism is 10²–10⁵ transformants per microgram DNA. We tried different buffers and conditions, aiming to elevate its transformation efficiency.
Methods and Results:  MgCl₂ and sucrose are often included in the washing and/or electroporation buffers to stabilize the cell membrane. However, Mg²⁺ is required for production and activity of the extracellular nuclease. A simple electroporation buffer lacking Mg²⁺ was found to increase transformation efficiency dramatically, to levels 50-fold more than the buffers containing Mg²⁺. To maintain the stability of the cell membranes, Mg²⁺ was replaced with high concentrations of sucrose, from 272 to 408 mmol l⁻¹. With the new buffers, the transformation efficiency of Vibrio parahaemolyticus was increased to 2·2 × 10⁶ transformants per microgram DNA.
Conclusions:  Mg²⁺ in the buffer adversely affected transformation of V. parahaemolyticus by electroporation. The cell membranes of vibrio can be stabilized by high concentration of sucrose when Mg²⁺ is absent.
Significance and Impact of the Study:  A greater transformation efficiency can facilitate the genetic analysis of an organism and its pathogenicity. Buffers lacking Mg²⁺ can be used for other nuclease-producing organisms.     

Antibacterial activities of zinc oxide nanoparticles against Escherichia coli O157:H7

Aims:  To investigate antibacterial activities of zinc oxide nanoparticles (ZnO NP) and their mode of action against an important foodborne pathogen, Escherichia coli O157:H7.
Methods and Results:  ZnO NP with sizes of 70 nm and concentrations of 0, 3, 6 and 12 mmol l⁻¹ and NP-free solutions were used in antimicrobial tests against E. coli O157:H7. ZnO NP showed increasing inhibitory effects on the growth of E. coli O157:H7 as the concentrations of ZnO NP increased. A complete inhibition of microbial growth was achieved at the concentration level of 12 mmol l⁻¹ or higher. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy were used to characterize the changes of morphology and cellular compositions of bacterial cells treated with ZnO NP and study the mode of action of ZnO NP against E. coli O157:H7. The intensity of lipid and protein bands in the Raman spectra of bacterial cells increased after exposure to ZnO NP, while no significant changes in nucleic acid bands were observed.
Conclusions:  ZnO NP were found to have antibacterial activity against E. coli O157:H7. The inhibitory effects increase as the concentration of ZnO NP increased. Results indicate that ZnO NP may distort and damage bacterial cell membrane, resulting in a leakage of intracellular contents and eventually the death of bacterial cells.
Significance and Impact of the Study:  These results suggest that ZnO NP could potentially be used as an effective antibacterial agent to protect agricultural and food safety.     

Biosurfactant production by Pseudomonas sp. and its role in aqueous phase partitioning and biodegradation of chlorpyrifos

Aim:  To study the effect of biosurfactant on aqueous phase solubility and biodegradation of chlorpyrifos.
Methods and Results:  A Pseudomonas sp. (ChlD), isolated from agricultural soil by enrichment culture technique in the presence of chlorpyrifos, was capable of producing biosurfactant (rhamnolipids) and degrading chlorpyrifos (0·01 g l⁻¹). The partially purified rhamnolipid biosurfactant preparation, having a CMC of 0·2 g l⁻¹, was evaluated for its ability to enhance aqueous phase partitioning and degradation of chlorpyrifos (0·01 g l⁻¹) by ChlD strain. The best degradation efficiency was observed at 0·1 g l⁻¹ supplement of biosurfactant, as validated by GC and HPLC studies.
Conclusion:  The addition of biosurfactant at 0·1 g l⁻¹ resulted in more than 98% degradation of chlorpyrifos when compared to 84% in the absence of biosurfactant after 120-h incubation.
Significance and Impact of the Study:  This first report, to the best of our knowledge, on enhanced degradation of chlorpyrifos in the presence of biosurfactant(s), would help in developing bioremediation protocols to counter accumulation of organophosphates to toxic/carcinogenic levels in environment.     

Production of tylosin in solid-state fermentation by Streptomyces fradiae NRRL-2702 and its gamma-irradiated mutant (γ-1)

Aims:  To develop solid-state fermentation system (SSF) for hyper production of tylosin from a mutant γ-1 of Streptomyces fradiae NRRL-2702 and its parent strain.
Methods and Results:  Various agro-industrial wastes were screened to study their effect on tylosin production in SSF. Wheat bran as solid substrate gave the highest production of 2500 μg of tylosin g⁻¹ substrate by mutant γ-1 against parent strain (300 μg tylosin g⁻¹ substrate). The tylosin yield was further improved to 4500 μg g⁻¹ substrate [70% moisture, 10% inoculum (v/w), pH 9·2, 30°C, supplemental lactose and sodium glutamate on day 9]. Wild-type strain displayed less production of tylosin (655 μg of tylosin g⁻¹ substrate) in SSF even after optimization of process parameters.
Conclusion:  The study has shown that solid-state fermentation system significantly enhanced the tylosin yield by mutant γ-1.
Significance and Impact of the Study:  This study proved to be very useful and resulted in 6·87 ± 0·30-fold increase in tylosin yield by this mutant when compared to that of wild-type strain.     

Characterization of a novel thermophilic, cellulose-degrading bacterium Paenibacillus sp. strain B39

Aims:  The aims of this study were to identify and characterize the novel thermophilic, cellulose-degrading bacterium Paenibacillus sp. strain B39.
Methods and Results:  Strain B39 was closely related to Paenibacillus cookii in 16S rRNA gene sequence. Nonetheless, this isolate can be identified as a novel Paenibacillus sp. with respect to its physiological characteristics, biochemical reactions, and profiles of fatty acid compositions. A cellulase with both CMCase and avicelase activities was secreted from strain B39 and purified by ion-exchange chromatography. By sodium dodecyl sulfate–polyacrylamide gel electrophoresis analysis, the molecular weight of B39 cellulase was determined as 148 kDa, which was much higher than other cellulases currently reported from Paenibacillus species. The enzyme showed a maximum CMCase activity at 60°C and pH 6·5. Addition of 1 mmol l⁻¹ of Ca²⁺ markedly enhanced both CMCase and avicelase activities of the enzyme.
Conclusions:  We have identified and characterized a novel thermophilic Paenibacillus sp. strain B39 which produced a high-molecular weight cellulase with both CMCase and avicelase activities.
Significance and Impact of the Study:  Based on the ability to hydrolyse CMC and avicel, the cellulase produced by Paenibacillus sp. strain B39 would have potential applications in cellulose biodegradation.