Prospecting for Energy-Rich Renewable Raw Materials: Agave Leaf Case Study

Plant biomass from different species is heterogeneous, and this diversity in composition can be mined to identify materials of value to fuel and chemical industries. Agave produces high yields of energy-rich biomass, and the sugar-rich stem tissue has traditionally been used to make alcoholic beverages. Here, the compositions of Agave americana and Agave tequilana leaves are determined, particularly in the context of bioethanol production. Agave leaf cell wall polysaccharide content was characterized by linkage analysis, non-cellulosic polysaccharides such as pectins were observed by immuno-microscopy, and leaf juice composition was determined by liquid chromatography. Agave leaves are fruit-like—rich in moisture, soluble sugars and pectin. The dry leaf fiber was composed of crystalline cellulose (47–50% w/w) and non-cellulosic polysaccharides (16–22% w/w), and whole leaves were low in lignin (9–13% w/w). Of the dry mass of whole Agave leaves, 85–95% consisted of soluble sugars, cellulose, non-cellulosic polysaccharides, lignin, acetate, protein and minerals. Juice pressed from the Agave leaves accounted for 69% of the fresh weight and was rich in glucose and fructose. Hydrolysis of the fructan oligosaccharides doubled the amount of fermentable fructose in A. tequilana leaf juice samples and the concentration of fermentable hexose sugars was 41–48 g/L. In agricultural production systems such as the tequila making, Agave leaves are discarded as waste. Theoretically, up to 4000 L/ha/yr of bioethanol could be produced from juice extracted from waste Agave leaves. Using standard Saccharomyces cerevisiae strains to ferment Agave juice, we observed ethanol yields that were 66% of the theoretical yields. These data indicate that Agave could rival currently used bioethanol feedstocks, particularly if the fermentation organisms and conditions were adapted to suit Agave leaf composition.     

Comparison of cell wall compositions of a desert xerophyte and a related mesophyte

A comparison was made of the cell wall compositions of stem internode tissues from two members of the Chenopodiaceae. Cell walls from Anabasis syriaca (a desert xerophyte) contained non-cellulosic polysaccharides rich in arabinose, xylose and galacturonic acid. The non-cellulosic polysaccharides from cell walls of Spinacia oleracea (a mesophyte) were rich in glucose. Anabasis syriaca cell walls contained relatively more cellulose and lignin than those of Spinacia oleracea.     

Effects of Calcium Ion Concentration on Cel Wall Synthesis

Cuttings of 6-week-old Norway spruce (Picea abies (L.) Karst.)seedlings were placed in liquid media containing various concentrationsof Ca²⁺. Cytoplasmic concentrations of Ca²⁺ were manipulatedusing the ionophore A 23 187. The effects of Ca²⁺ concentrationson the deposition of total cell wall material as well as onthe deposition of cellulose, lignin, and non-cellulosic polysaccharidesin the hypocotyls were investigated. At low concentrations ofCa²⁺ wall deposition was reduced, mainly as a result of theinhibition of lignin and non-cellulosic polysaccharide deposition.High concentrations of Ca²⁺ stimulated non-cellulosic polysaccharideand lignin deposition, whereas cellulose deposition was almosttotally inhibited. Key words: Conifers, calcium, cell wall, lignin, cellulose     

Genes encoding ADP-ribosylation factors in Arabidopsis thaliana L. Heyn.; genome analysis and antisense suppression

Vesicle trafficking delivers proteins to intracellular and extracellular compartments, cellulose synthase to the plasma membrane, and non-cellulosic polysaccharides to the cell wall. The Arabidopsis genome potentially encodes 19 proteins with sequence similarities to ARFs (ADP-ribosylation factors) and its relatives such as ARLs (ARF-like proteins). ARFs are essential for vesicle coating and uncoating in all eukaryotic cells, while ARLs play more diverse roles. Nine proteins, six of them highly similar, are possible ARFs, three are putative ARL orthologues and the remainder were designated ARF-related proteins. The functions of the six highly similar, putative ARFs in whole plant development were probed by suppressing their expression with antisense. Antisense plants were severely stunted because cell production rate and final cell size were both reduced. Changed time-to-flowering, apical dominance, and fertility may reflect alterations to hormonal and other signalling pathways with which ARFs may interact. No gross changes in targeting or compartmentalization were seen in antisense plants containing GFP targeted to the ER and Golgi and changes in cell wall composition were limited to increases in some non-cellulosic polysaccharides and a relatively small decrease in cellulose. The reasons why these effects are less drastic than the effects on endomembranes and wall composition that are seen in short-term experiments with brefeldin A and with dominant negative ARF mutants are discussed.     

Formation of macromolecular lignin in ginkgo xylem cell walls as observed by field emission scanning electron microscopy

Formation of macromolecular lignin in ginkgo cell walls. In the lignifying process of xylem cell walls, macromolecular lignin is formed by polymerization of monolignols on the pectic substances, hemicellulose and cellulose microfibrils that have deposited prior to the start of lignification. Observation of lignifying secondary cell walls of ginkgo tracheids by field emission scanning electron microscopy suggested that lignin-hemicellulose complexes are formed as tubular bead-like modules surrounding the cellulose microfibrils (CMFs), and that the complexes finally fill up the space between CMFs. The size of one tubular bead-like module in the middle layer of the secondary wall (S2) was tentatively estimated to be about 16+/-2 nm in length, about 25+/-1 nm in outer diameter, with a wall thickness of 4+/-2 nm; the size of the modules in the outer layer of the secondary wall (S1) was larger and they were thicker-walled than that in the middle layer (S2). Aggregates of large globular modules were observed in the cell corner and compound middle lamella. It was suggested that the structure of non-cellulosic polysaccharides and mode of their association with CMFs may be important factors controlling the module formation and lignin concentration in the different morphological regions of the cell wall.     

Covalent linkages between cellulose and lignin in cell walls of coniferous and nonconiferous woods

Covalent linkages between wall polysaccharides and lignin, especially linkage between cellulose and lignin were discussed by carboxymethylation technique of whole cell walls of coniferous and nonconiferous woods. Hydroxyl groups of plant cell walls polysaccharides were highly substituted, but not those of lignin by carboxymethyl groups under the used conditions, and separated into water-soluble and insoluble fractions by water extraction. Carboxymethylated wall polysaccharides linked covalently with lignin were distributed into the water-insoluble fractions. Composition of carboxymethylated sugar residues in the both fractions was analyzed quantitatively by 1H NMR spectroscopy after hydrolyzation with D2SO4 in D2O. More than half of cellulose linked covalently with lignin in coniferous wood, but only one-sixth of cellulose was involved in the linkage in nonconiferous wood. The major noncellulosic wall polysaccharides of coniferous wood also linked significantly with lignin. On the other hand, noncellulosic wall polysaccharides of nonconiferous wood were involved slightly in the covalent linkage with lignin. The situation of linkage between wall polysaccharides containing cellulose and lignin was visualized by scanning electron micrographs.     

Influence of growth conditions on the composition of cell wall polysaccharides from cultured tobacco cells

The sugar composition of cell wall polysaccharides of two tobacco varieties obtained from mesophyll, regenerating protoplasts and cells grown under various conditions were compared. Regenerating protoplasts developed an unusual cell wall with a low cellulose and a high non-cellulosic glucan content. In the presence of different phytohormones compact and friable calli were obtained with cell walls containing low and high arabinose/xylose ratios. The cell walls of compact calli were comparable to those of genuine mesophyll cells. The sugar constituents of cell walls obtained from cells grown in liquid media were different from those of solid calli. The cell wall composition of suspension cultured cells was hardly affected by various combinations of phytohormones, but was altered by high osmolarity of the medium.     

Lignin Depletion Enhances the Digestibility of Cellulose in Cultured Xylem Cells

Plant lignocellulose constitutes an abundant and sustainable source of polysaccharides that can be converted into biofuels. However, the enzymatic digestion of native plant cell walls is inefficient, presenting a considerable barrier to cost-effective biofuel production. In addition to the insolubility of cellulose and hemicellulose, the tight association of lignin with these polysaccharides intensifies the problem of cell wall recalcitrance. To determine the extent to which lignin influences the enzymatic digestion of cellulose, specifically in secondary walls that contain the majority of cellulose and lignin in plants, we used a model system consisting of cultured xylem cells from Zinnia elegans . Rather than using purified cell wall substrates or plant tissue, we have applied this system to study cell wall degradation because it predominantly consists of homogeneous populations of single cells exhibiting large deposits of lignocellulose. We depleted lignin in these cells by treating with an oxidative chemical or by inhibiting lignin biosynthesis, and then examined the resulting cellulose digestibility and accessibility using a fluorescent cellulose-binding probe. Following cellulase digestion, we measured a significant decrease in relative cellulose content in lignin-depleted cells, whereas cells with intact lignin remained essentially unaltered. We also observed a significant increase in probe binding after lignin depletion, indicating that decreased lignin levels improve cellulose accessibility. These results indicate that lignin depletion considerably enhances the digestibility of cellulose in the cell wall by increasing the susceptibility of cellulose to enzymatic attack. Although other wall components are likely to contribute, our quantitative study exploits cultured Zinnia xylem cells to demonstrate the dominant influence of lignin on the enzymatic digestion of the cell wall. This system is simple enough for quantitative image analysis, but realistic enough to capture the natural complexity of lignocellulose in the plant cell wall. Consequently, these cells represent a suitable model for analyzing native lignocellulose degradation.     

Modifying plants for biofuel and biomaterial production

The productivity of plants as biofuel or biomaterial crops is established by both the yield of plant biomass per unit area of land and the efficiency of conversion of the biomass to biofuel. Higher yielding biofuel crops with increased conversion efficiencies allow production on a smaller land footprint minimizing competition with agriculture for food production and biodiversity conservation. Plants have traditionally been domesticated for food, fibre and feed applications. However, utilization for biofuels may require the breeding of novel phenotypes, or new species entirely. Genomics approaches support genetic selection strategies to deliver significant genetic improvement of plants as sources of biomass for biofuel manufacture. Genetic modification of plants provides a further range of options for improving the composition of biomass and for plant modifications to assist the fabrication of biofuels. The relative carbohydrate and lignin content influences the deconstruction of plant cell walls to biofuels. Key options for facilitating the deconstruction leading to higher monomeric sugar release from plants include increasing cellulose content, reducing cellulose crystallinity, and/or altering the amount or composition of noncellulosic polysaccharides or lignin. Modification of chemical linkages within and between these biomass components may improve the ease of deconstruction. Expression of enzymes in the plant may provide a cost‐effective option for biochemical conversion to biofuel.     

Emerging strategies of lignin engineering and degradation for cellulosic biofuel production

Ethanol and other biofuels produced from lignocellulosic biomass represent a renewable, more carbon-balanced alternative to both fossil fuels and corn-derived or sugarcane-derived ethanol. Unfortunately, the presence of lignin in plant cell walls impedes the breakdown of cell wall polysaccharides to simple sugars and the subsequent conversion of these sugars to usable fuel. Recent advances in the understanding of lignin composition, polymerization, and regulation have revealed new opportunities for the rational manipulation of lignin in future bioenergy crops, augmenting the previous successful approach of manipulating lignin monomer biosynthesis. Furthermore, recent studies on lignin degradation in nature may provide novel resources for the delignification of dedicated bioenergy crops and other sources of lignocellulosic biomass.     

Overexpression of GA20‐OXIDASE1 impacts plant height,biomass allocation and saccharification efficiency in maize

Increased biomass yield and quality are of great importance for the improvement of feedstock for the biorefinery. For the production of bioethanol, both stem biomass yield and the conversion efficiency of the polysaccharides in the cell wall to fermentable sugars are of relevance. Increasing the endogenous levels of gibberellic acid (GA) by ectopic expression of GA20‐OXIDASE1 (GA20‐OX1), the rate‐limiting step in GA biosynthesis, is known to affect cell division and cell expansion, resulting in larger plants and organs in several plant species. In this study, we examined biomass yield and quality traits of maize plants overexpressing GA20‐OX1 (GA20‐OX1). GA20‐OX1 plants accumulated more vegetative biomass than control plants in greenhouse experiments, but not consistently over two years of field trials. The stems of these plants were longer but also more slender. Investigation of GA20‐OX1 biomass quality using biochemical analyses showed the presence of more cellulose, lignin and cell wall residue. Cell wall analysis as well as expression analysis of lignin biosynthetic genes in developing stems revealed that cellulose and lignin were deposited earlier in development. Pretreatment of GA20‐OX1 biomass with NaOH resulted in a higher saccharification efficiency per unit of dry weight, in agreement with the higher cellulose content. On the other hand, the cellulose‐to‐glucose conversion was slower upon HCl or hot‐water pretreatment, presumably due to the higher lignin content. This study showed that biomass yield and quality traits can be interconnected, which is important for the development of future breeding strategies to improve lignocellulosic feedstock for bioethanol production.     

Visualization of biomass solubilization and cellulose regeneration during ionic liquid pretreatment of switchgrass

Auto‐fluorescent mapping of plant cell walls was used to visualize cellulose and lignin in pristine switchgrass (Panicum virgatum) stems to determine the mechanisms of biomass dissolution during ionic liquid pretreatment. The addition of ground switchgrass to the ionic liquid 1‐n‐ethyl‐3‐methylimidazolium acetate resulted in the disruption and solubilization of the plant cell wall at mild temperatures. Swelling of the plant cell wall, attributed to disruption of inter‐ and intramolecular hydrogen bonding between cellulose fibrils and lignin, followed by complete dissolution of biomass, was observed without using imaging techniques that require staining, embedding, and processing of biomass. Subsequent cellulose regeneration via the addition of an anti‐solvent, such as water, was observed in situ and provided direct evidence of significant rejection of lignin from the recovered polysaccharides. This observation was confirmed by chemical analysis of the regenerated cellulose. In comparison to untreated biomass, ionic liquid pretreated biomass produces cellulose that is efficiently hydrolyzed with commercial cellulase cocktail with high sugar yields over a relatively short time interval. Biotechnol. Bioeng. 2009; 104: 68–75 Published 2009 Wiley Periodicals, Inc.     

Fractionation of carbohydrates in Arabidopsis root cell walls shows that three radial swelling loci are specifically involved in cellulose production

 Three non-allelic radial swelling mutants (rsw1, rsw2 and rsw3) of Arabidopsisthaliana L. Heynh. were shown to be specifically impaired in cellulose production. Fractionation methods that identify, characterise and quantify some of the major cell wall polysaccharides in small quantities of seedlings demonstrated that changes in the production of cellulose are much more pronounced than changes in the production of non-cellulosic polysaccharides. A crude cell wall pellet was sequentially extracted with chloroform methanol (to recover lipids), dimethyl sulphoxide (starch), ammonium oxalate (pectins) and alkali (hemicelluloses). Crystalline cellulose remained insoluble through subsequent treatments with an acetic/nitric acid mixture and with trifluoroacetic acid. Cetyltrimethylammonium bromide precipitation resolved neutral and acidic polymers in the fractions, and precipitation behaviour, monosaccharide composition and glycosidic linkage patterns identified the major polysaccharides. The deduced composition of the walls of wild-type seedlings and the structure and solubility properties of the major polymers were broadly typical of other dicots. The three temperature-sensitive, radial swelling mutants produced less cellulose in their roots than the wild type when grown at their restrictive temperature (31 °C). There were no significant differences at 21 °C where no radial swelling occurs. The limited changes seen in the monosaccharide compositions, glycosidic linkage patterns and quantities of non-cellulosic polysaccharides support the view that the RSW1, RSW2 and RSW3 genes are specifically involved in cellulose synthesis. Reduced deposition of cellulose was accompanied by increased accumulation of starch. Received: 15 December 1999 / Accepted: 18 January 2000     

Impact of drought stress on growth and quality of miscanthus for biofuel production

Miscanthus has a high potential as a biomass feedstock for biofuel production. Drought tolerance is an important breeding goal in miscanthus as water deficit is a common abiotic stress and crop irrigation is in most cases uneconomical. Drought may not only severely reduce biomass yields, but also affect biomass quality for biofuel production as cell wall remodeling is a common plant response to abiotic stresses. The quality and plant weight of 50 diverse miscanthus genotypes were evaluated under control and drought conditions (28 days no water) in a glasshouse experiment. Overall, drought treatment decreased plant weight by 45%. Drought tolerance – as defined by maintenance of plant weight – varied extensively among the tested miscanthus genotypes and ranged from 30% to 110%. Biomass composition was drastically altered due to drought stress, with large reductions in cell wall and cellulose content and a substantial increase in hemicellulosic polysaccharides. Stress had only a small effect on lignin content. Cell wall structural rigidity was also affected by drought conditions; substantially higher cellulose conversion rates were observed upon enzymatic saccharification of drought‐treated samples with respect to controls. Both cell wall composition and the extent of cell wall plasticity under drought varied extensively among all genotypes, but only weak correlations were found with the level of drought tolerance, suggesting their independent genetic control. High drought tolerance and biomass quality can thus potentially be advanced simultaneously. The extensive genotypic variation found for most traits in the evaluated miscanthus germplasm provides ample scope for breeding of drought‐tolerant varieties that are able to produce substantial yields of high‐quality biomass under water deficit conditions. The higher degradability of drought‐treated samples makes miscanthus an interesting crop for the production of second‐generation biofuels in marginal soils.     

The molecular basis of plant cell wall extension

In all terrestrial and aquatic plant species the primary cell wall is a dynamic structure, adjusted to fulfil a diversity of functions. However a universal property is its considerable mechanical and tensile strength, whilst being flexible enough to accommodate turgor and allow for cell elongation. The wall is a composite material consisting of a framework of cellulose microfibrils embedded in a matrix of non-cellulosic polysaccharides, interlaced with structural proteins and pectic polymers. The assembly and modification of these polymers within the growing cell wall has, until recently, been poorly understood. Advances in cytological and genetic techniques have thrown light on these processes and have led to the discovery of a number of wall-modifying enzymes which, either directly or indirectly, play a role in the molecular basis of cell wall expansion.     

Glucuronoarabinoxylan structure in the walls of Aechmea leaf chlorenchyma cells is related to wall strength

In CAM-plants rising levels of malic acid in the early morning cause elevated turgor pressures in leaf chlorenchyma cells. Under specific conditions this process is lethal for sensitive plants resulting in chlorenchyma cell burst while other species can cope with these high pressures and do not show cell burst under comparable conditions. The non-cellulosic polysaccharide composition of chlorenchyma cell walls was investigated and compared in three cultivars of Aechmea with high sensitivity for chlorenchyma cell burst and three cultivars with low sensitivity. Chlorenchyma layers were cut from the leaf and the non-cellulosic carbohydrate fraction of the cell wall fraction was analyzed by gas-liquid chromatography. Glucuronoarabinoxylans (GAXs) were the major non-cellulosic polysaccharides in Aechmea. The fine structure of these GAXs was strongly related to chlorenchyma wall strength. Chlorenchyma cell walls from cultivars with low sensitivity to cell burst were characterized by an A/X ratio of ca. 0.13 while those from cultivars with high sensitivity showed an A/X ratio of ca. 0.23. Xylose chains from cultivars with high cell burst sensitivity were ca. 40% more substituted with arabinose compared to cultivars with low sensitivity for cell burst. The results indicate a relationship in vivo between glucuronoarabinoxylan fine structure and chlorenchyma cell wall strength in Aechmea. The evidence obtained supports the hypothesis that GAXs with low degrees of substitution cross-link cellulose microfibrils, while GAXs with high degrees of substitution do not. A lower degree of arabinose substitution on the xylose backbone implies stronger cell walls and the possibility of withstanding higher internal turgor pressures without cell bursting.     

Structure of cellulose-deficient secondary cell walls from the irx3 mutant of Arabidopsis thaliana

In the Arabidopsis mutant irx3, truncation of the AtCesA7 gene encoding a xylem-specific cellulose synthase results in reduced cellulose synthesis in the affected xylem cells and collapse of mature xylem vessels. Here we describe spectroscopic experiments to determine whether any cellulose, normal or abnormal, remained in the walls of these cells and whether there were consequent effects on other cell-wall polysaccharides. Xylem cell walls from irx3 and its wild-type were prepared by anatomically specific isolation and were examined by solid-state NMR spectroscopy and FTIR microscopy. The affected cell walls of irx3 contained low levels of crystalline cellulose, probably associated with primary cell walls. There was no evidence that crystalline cellulose was replaced by less ordered glucans. From the molecular mobility of xylans and lignin it was deduced that these non-cellulosic polymers were cross-linked together in both irx3 and the wild-type. The disorder previously observed in the spatial pattern of non-cellulosic polymer deposition in the secondary walls of irx3 xylem could not be explained by any alteration in the structure or cross-linking of these polymers and may be attributed directly to the absence of cellulose microfibrils which, in the wild-type, scaffold the organisation of the other polymers into a coherent secondary cell wall.     

Histochemical Staining of Arabidopsis thaliana Secondary Cell Wall Elements

Arabidopsis thaliana is a model organism commonly used to understand and manipulate various cellular processes in plants, and it has been used extensively in the study of secondary cell wall formation. Secondary cell wall deposition occurs after the primary cell wall is laid down, a process carried out exclusively by specialized cells such as those forming vessel and fiber tissues. Most secondary cell walls are composed of cellulose (40–50%), hemicellulose (25–30%), and lignin (20–30%). Several mutations affecting secondary cell wall biosynthesis have been isolated, and the corresponding mutants may or may not exhibit obvious biochemical composition changes or visual phenotypes since these mutations could be masked by compensatory responses. Staining procedures have historically been used to show differences on a cellular basis. These methods are exclusively visual means of analysis; nevertheless their role in rapid and critical analysis is of great importance. Congo red and calcofluor white are stains used to detect polysaccharides, whereas Mäule and phloroglucinol are commonly used to determine differences in lignin, and toluidine blue O is used to differentially stain polysaccharides and lignin. The seemingly simple techniques of sectioning, staining, and imaging can be a challenge for beginners. Starting with sample preparation using the A. thaliana model, this study details the protocols of a variety of staining methodologies that can be easily implemented for observation of cell and tissue organization in secondary cell walls of plants.     

A HISTOCHEMICAL STUDY OF ABSCISSION LAYER FORMATION IN THE BEAN

In debladed bean petioles calcium and dry weight increased in the abscission zone during an induction period of 14 hr. Before the microscopic appearance of the abscission layer calcium decreased in the abscission zone and increased in the petiole. Dry matter began to decrease in both the abscission zone and the petiole 24 hr after deblading. The first visual change in the cells of the abscission zone was a swelling of the pectic materials of the cell walls. This was followed by breakdown of other cell wall components, i.e., non-cellulosic polysaccharides and cellulose. The cellulose of the cell walls adjacent and distal to the abscission layer was found to be altered; however, no lignin was present during abscission layer development. The alteration of pectic materials, coupled with breakdown of cell wall components, resulted in the collapse of cells of the abscission layer just prior to separation. Auxin delayed abscission and also delayed the initial increase in calcium, the movement of calcium from the abscission zone to the petiole, and the decrease in dry weight.