Chitosan coated alginate beads for the survival of microencapsulated Lactobacillus plantarum in pomegranate juice

This work studied the effect of multi-layer coating of alginate beads on the survival of encapsulated Lactobacillus plantarum in simulated gastric solution and during storage in pomegranate juice at 4°C. Uncoated, single and double chitosan coated beads were examined. The survival of the cells in simulated gastric solution (pH 1.5) was improved in the case of the chitosan coated beads by 0.5-2 logs compared to the uncoated beads. The cell concentration in pomegranate juice after six weeks of storage was higher than 5.5logCFU/mL for single and double coated beads, whereas for free cells and uncoated beads the cells died after 4 weeks of storage. In simulated gastric solution, the size of the beads decreased and their hardness increased with time; however, the opposite trend was observed for pomegranate juice, indicating that there is no correlation between cell survival and the hardness of the beads.     

Fibroblast receptor for cell-substratum adhesion: studies on the interaction of baby hamster kidney cells with latex beads coated by cold insoluble globulin (plasma fibronectin)

Studies were carried out on the interactions of uncharged latex beads (0.76 micrometer) with baby hamster kidney cells. Binding of beads to the cells occurred if the beads were coated by cold insoluble globulin (CIG) (plasma fibronectin) but not if the beads were coated by bovine albumin. Bovine albumin-coated beads did not bind to the cells even in the presence of excess CIG in the incubation medium. Binding of beads occurred randomly over the entire surfaces of cells in suspension. However, cell receptors for CIG beads were no longer detectable on the upper surface of cells spread onCIG-coated tissue culture dishes. Binding of CIG beads to cells occurred at all temperatures tested from 4 degrees to 37 degrees C but the rate was lowest at 4 degrees C. At 37 degrees C, binding was accompanied by endocytosis and the beads were found inside vesicles which appeared to be lysosomes. There was also release of radioactivity from radiolabeled CIG beads during incubation with the cells at 37 degrees C. Binding of CIG beads to cells did not require divalent cations. Finally, the cell receptor for CIG beads was lost after cell trypsinization. The data are discussed in terms of current ideas about the basis for cell adhesion.     

Bacterial cellulose-chitosan composite hydrogel beads for enzyme immobilization

In this work, we report the preparation of bacterial cellulose (BC)-chitosan composite hydrogel beads by co-dissolution of BC and chitosan in 1-ethyl-3-methylimidazolium acetate and subsequent reconstitution with distilled water. The BC-chitosan hydrogel beads were used as enzyme supports for immobilizing Candida rugosa lipase by physical adsorption and covalent cross-linking. BC-chitosan hydrogel beads immobilized lipase more efficiently than microcrystalline cellulose (MCC)-chitosan hydrogel beads. The amount of protein adsorbed onto BCchitosan beads was 3.9 times higher than that adsorbed onto MCC-chitosan beads, and the catalytic activity of lipase was 1.9 times higher on the BC-chitosan beads. The lipase showed the highest thermal and operational stability when covalently cross-linked on BC-chitosan hydrogel beads. The half-life time of the lipase cross-linked on BC-chitosan bead at 60°C was 22.7 times higher than that of free lipase. Owing to their inherent biocompatibility and biodegradability, the BC-chitosan composite hydrogel beads described here could be used to immobilize proteins for various biomedical, environmental, and biocatalytic applications.     

NIST/ISAC standardization study: Variability in assignment of intensity values to fluorescence standard beads and in cross calibration of standard beads to hard dyed beads

Results from a standardization study cosponsored by the International Society for Advancement of Cytometry (ISAC) and the US National Institute of Standards and Technology (NIST) are reported. The study evaluated the variability of assigning intensity values to fluorophore standard beads by bead manufacturers and the variability of cross calibrating the standard beads to stained polymer beads (hard-dyed beads) using different flow cytometers. Hard dyed beads are generally not spectrally matched to the fluorophores used to stain cells, and spectral response varies among flow cytometers. Thus if hard dyed beads are used as fluorescence calibrators, one expects calibration for specific fluorophores (e.g., FITC or PE) to vary among different instruments. Using standard beads surface-stained with specific fluorophores (FITC, PE, APC, and Pacific Blue?), the study compared the measured intensity of fluorophore standard beads to that of hard dyed beads through cross calibration on 133 different flow cytometers. Using robust CV as a measure of variability, the variation of cross calibrated values was typically 20% or more for a particular hard dyed bead in a specific detection channel. The variation across different instrument models was often greater than the variation within a particular instrument model. As a separate part of the study, NIST and four bead manufacturers used a NIST supplied protocol and calibrated fluorophore solution standards to assign intensity values to the fluorophore beads. Values assigned to the reference beads by different groups varied by orders of magnitude in most cases, reflecting differences in instrumentation used to perform the calibration. The study concluded that the use of any spectrally unmatched hard dyed bead as a general fluorescence calibrator must be verified and characterized for every particular instrument model. Close interaction between bead manufacturers and NIST is recommended to have reliable and uniformly assigned fluorescence standard beads. ? 2012 International Society for Advancement of Cytometry.     

The development of quantum dot calibration beads and quantitative multicolor bioassays in flow cytometry and microscopy

The use of fluorescence calibration beads has been the hallmark of quantitative flow cytometry. It has enabled the direct comparison of interlaboratory data as well as quality control in clinical flow cytometry. In this article, we describe a simple method for producing color-generalizable calibration beads based on streptavidin functionalized quantum dots. Based on their broad absorption spectra and relatively narrow emission, which is tunable on the basis of dot size, quantum dot calibration beads can be made for any fluorophore that matches their emission color. In an earlier publication, we characterized the spectroscopic properties of commercial streptavidin functionalized dots (Invitrogen). Here we describe the molecular assembly of these dots on biotinylated beads. The law of mass action is used to readily define the site densities of the dots on the beads. The applicability of these beads is tested against the industry standard, namely commercial fluorescein calibration beads. The utility of the calibration beads is also extended to the characterization surface densities of dot-labeled epidermal growth factor ligands as well as quantitative indicators of the binding of dot-labeled virus particles to cells.     

结冷胶固定化保加利亚乳杆菌及在玉米秸秆连续发酵d-乳酸中的应用

秸秆生物炼制化学品是解决秸秆资源利用附加值低、减轻秸秆焚烧带来的环境污染的主要方法之一。本研究制备了结冷胶固定化保加利亚乳酸杆菌(Lactobacillus bulgaricus)T15凝胶珠(结冷胶-T15凝胶珠),并对其性质进行表征,建立了结冷胶-T15凝胶珠固定化细胞循环连续发酵产D-乳酸发酵工艺。结冷胶-T15凝胶珠的断裂应力为(91.68±0.11) kPa,较海藻酸钙固定化T15凝胶珠(海藻酸钙-T15凝胶珠)提高了125.12%,表明结冷胶-T15凝胶珠的强度更强。以结冷胶-T15凝胶珠为出发菌株,葡萄糖为发酵基质,10批次循环(720h)发酵,其D-乳酸最高批次产量为(72.90±2.79)g/L,较海藻酸钙-T15凝胶珠提高了33.85%,较游离T15提高了37.70%。将葡萄糖更换为玉米秸秆酶解液,使用结冷胶-T15凝胶珠进行10批次循环(240 h)发酵,D-乳酸生产强度可达(1.74±0.79)g/(L·h),远高于游离菌。10批次循环发酵后结冷胶-T15凝胶珠磨损率小于5%,表明结冷胶是一种细胞固定化的良好载体,可广泛应用于细胞固定化工业发酵领域。本研究为细胞...     

Behavioural and electrophysiological responses of the malaria mosquito Anopheles gambiae Giles sensu stricto (Diptera: Culicidae) to human skin emanations

Behavioural and electrophysiological responses of Anopheles gambiae Giles sensu stricto (Diptera: Culicidae) to human skin emanations collected on glass beads were studied using a dual-port olfactometer and electroantannography. Glass beads to which skin emanations from human hands had been transferred elicited a level of attraction similar to a human hand. The attractiveness of these handled glass beads faded away 4 h after transfer onto the beads. Storage at -20 degrees C for up to 8 weeks showed a decreased but still attractive effect of the beads. In a choice test between one individual and four others, the emanations from the reference individual were significantly more attractive in three out of four cases. The headspace of handled glass beads elicited a dose-dependent EAG response. The substances causing EAG activity could be removed partially by dichloromethane, ethanol and pentane-ether. Glass beads provide a suitable neutral substrate for the transfer of human odour to enable chemical analysis of the human skin emanations for identification of kairomones of anthropophilic mosquitoes.     

Improved stability and catalytic activity of graphene oxide/chitosan hybrid beads loaded with porcine liver esterase

Graphene oxide/chitosan and reduced graphene oxide/chitosan (GO/CS and RGO/CS) beads were prepared by precipitation with NaOH. Porcine liver esterase was immobilized on these beads to give GO/CS/E and RGO/CS/E beads. The optimum conditions for the maximum activity of RGO/CS/E beads were pH 8 and 50°C. The stability of the enzyme immobilized on GO/CS/E and RGO/CS/E was high in the pH range of 5–8. The GO/CS/E beads showed superior stability compared to that of the free enzyme and CS/E beads between 20 and 50°C. Kinetic analysis showed that GO/CS/E was a better catalyst than the RGO/CS/E beads with a lower K_m value of 0.9?mM. The hybrid beads also retained more than 95% activity after 10 consecutive cycles. The GO/CS/E and RGO/CS/E beads retained 84% and 87% activity after 40 days at 4°C. The GO/CS/E beads were used for the successful hydrolysis of methyl 4-hydroxy benzoate.     

Stabilization of alginate beads using radiation polymerized polyacrylamide.

A technique has been described for the stabilization of calcium alginate beads using radiation polymerized acrylamide. The technique involved dropping a mixture containing the cells (20%), sodium alginate (2%), acrylamide (2.5%) and N-N'-methylene-bis-acrylamide (0.1%) through a syringe needle into cold (-75 degrees C) toluene. The frozen beads obtained were exposed to 60Co gamma-rays (0.5 KGy) and were then thawed in 0.1 M CaCl2 solution. Unlike the calcium alginate beads the conjugate beads were not found to be dissolved when incubated in 3% trisodium citrate solution. Stabilized beads containing entrapped yeast cells could be reused for over 15 batches for the inversion of sucrose without loss in activity or chemical integrity of the beads.     

Effects of different fragments of the fibronectin molecule on latex bead translocation along neural crest migratory pathways

Previous studies from this laboratory have utilized latex beads as probes of embryonic migratory pathways. After microinjection into embryos at the time of neural crest migration, uncoated latex polystyrene beads were found to translocate to ventral sites and to settle in the vicinity of endogenous neural crest derivatives. However, latex beads coated with fibronectin did not translocate ventrally, but remained associated with cells surrounding the implantation site. Fibronectin is a large glycoprotein with a variety of biological activities and multiple binding domains. Here, the binding activities which might be responsible for immobilization of the fibronectin-coated beads are examined. Latex beads were coated with three types of fragments of the fibronectin molecule representing different functional domains: (i) a 66-kDa fragment containing collagen-binding activity; (ii) a mixture of 45- and 32-kDa fragments containing heparin-binding activity; and (iii) a 120-kDa fragment containing cell-binding activity. The beads coated with fibronectin fragments were injected into the newly formed trunk somites of avian embryos. After injection, beads coated with either the heparin- or the collagen-binding domain translocated ventrally and distributed analogously to uncoated latex beads. In contrast, the majority of beads coated with the fibronectin cell-binding domain did not translocate but remained associated with dermamyotomal cells surrounding the injection site. The cell-binding fragment, however, was not as effective as the intact fibronectin molecule in preventing translocation of the beads. The results suggest that the cell-binding domain is primarily responsible for restriction of fibronectin beads from the ventral neural crest pathway. Because intact fibronectin is more effective at immobilizing beads than is the cell-binding fragment, other binding domains of fibronectin, more efficient coating with intact fibronectin, or crosslinking of intact fibronectin molecules may also play some role in immobilization of the beads at the implantation site.     

Latex beads as probes of a neural crest pathway: effects of laminin, collagen, and surface charge on bead translocation

In the trunk region of avian embryos, neural crest cells migrate along two pathways: dorsally just under the ectoderm, and ventrally between the neural tube and the somites. Previous work from this laboratory has shown that uncoated latex beads are able to translocate along the ventral neural crest pathway after injection into young embryos; however, beads coated with fibronectin are restricted from the ventral route ( Bronner -Fraser, M.E., 1982, Dev. Biol., 91: 50-63). Here, we extend these observations to determine the effects of other macromolecules on bead distribution. The data show that laminin-coated beads, like fibronectin-coated beads, are restricted from the ventral pathway. In contrast, beads coated with type I collagen translocate ventrally after injection. Because macromolecules have characteristic charge properties, changes in surface charge caused by coating the beads may confound interpretation of the results. Electrostatic effects on bead movement were examined by coating the latex beads with polyamino acids in order to predictably alter the initial surface charge. The surface charge before injection was measured for beads coated with amino acid polymers or with various biologically important macromolecules; the subsequent translocation ability of these beads was then monitored in the embryo. Polylysine-coated beads (positively charged) were restricted from the ventral pathway as were fibronectin and laminin-coated beads, even though fibronectin and laminin beads were both negatively charged. In contrast, polytyrosine -coated beads ( neutrally charged) translocated ventrally as did negatively charged collagen-coated or uncoated beads. The results demonstrate that no correlation exists between the charge properties on the latex bead surface and their subsequent ability to translocate along the ventral pathway. Therefore, an adhesion mechanism independent of surface charge effects must explain the restriction or translocation of latex beads on a neural crest pathway.     

Characterization of calcium alginate and chitosan-treated calcium alginate gel beads entrapping allyl isothiocyanate

Calcium alginate (CA), chitosan-coated calcium alginate (CCA-I), and chitosan–calcium alginate complex (CCA-II) gel beads, in which an oil-in-water emulsion containing allyl isothiocyanate (AITC) was entrapped, were prepared and characterized for efficient oral delivery of AITC. The AITC entrapment efficiency was 81% for CA gel beads, whereas about 30% lower values were determined for the chitosan-treated gel beads. Swelling studies showed that all the gel beads suddenly shrunk in simulated gastric fluid (pH 1.2). In simulated intestinal fluid (pH 7.4), CA and CCA-I gel beads rapidly disintegrated, whereas CCA-II gel beads highly swelled without degradation probably due to the strong chitosan–alginate complexation. Release studies revealed that most entrapped AITC was released during the shrinkage, degradation, or swelling of the gel beads, and the chitosan treatments, especially the chitosan–alginate complexation, were effective in suppressing the release. CCA-II gel beads showed the highest bead stability and AITC retention under simulated gastrointestinal pH conditions.     

Coupling polylysine to glass beads for plasma membrane isolation

Solid glass beads for use in isolating cell membranes were coated with a stable, covalently attached layer of polylysine. The optimal conditions for coating the bead surface were established and the beads were tested by measuring the attachment of human erythrocyte plasma membranes. When compared to other beads, such as those with absorbed polylysine or protamine, none retained red-cell membranes as well as glass beads with covalently linked polylysine.     

Fibronectin-mediated binding and phagocytosis of polystyrene latex beads by baby hamster kidney cells

The binding and phagocytosis of fibronectin (pFN)-coated latex beads by baby hamster kidney (BHK) cells was studied as a function of fibronectin concentration and bead diameter. Cells were incubated with radioactive pFN-coated beads, and total bead binding (cell surface or ingested) was measured as total radioactivity associated with the cells. Of the bound beads, those that also were phagocytosed were distinguished by their insensitivity to release from the cells by trypsin treatment. In continuous incubations, binding of pFN-coated beads to cells occurred at 4 degrees C or 37 degrees C, but phagocytosis was observed only at 37 degrees C. In addition, degradation of 3H-pFN from ingested beads occurred at 37 degrees C, as shown by the release of trichloroacetic acid-soluble radioactivity into the incubation medium. When the fibronectin density on the beads was varied, binding at 4 degrees C and ingestion at 37 degrees C were found to have the same dose-response dependencies, which indicated that pFN densities that permitted bead binding were sufficient for phagocytosis to occur. The fibronectin density for maximal binding of ingestion was approximately 250 ng pFN/cm2. When various sized beads (0.085-1.091 micron), coated with similar densities of pFN, were incubated with cells at 4 degrees C, no variation in binding as a function of bead size was observed. Under these conditions, the absolute amount of pFN ranged from less than 100 molecules on the 0.085-micron beads to greater than 15,000 molecules on the 1.091-micron beads. Based upon these results it can be concluded that the critical parameter controlling fibronectin-mediated binding of latex beads by BHK cells is the spacing of the pFN molecules on the beads. Correspondingly, it can be suggested that the spacing between pFN receptors on the cell surface that is optimal for multivalent interactions to occur is approximately 18 nM. When phagocytosis of various sized beads was compared, it was found that the largest beads were phagocytosed slightly better (two fold) than the smallest beads. This occurred both in continuous incubations of cells with beads and when the beads were prebound to the cells. Finally, the kinetic constants for the binding of 0.085 microM pFN-coated beads to the cells were analyzed. There appeared to be approximately 62,000 binding sites and the KD was 4.03 X 10(-9) M. Assuming a bivalent interaction, it was calculated that BHK cells have approximately 120,000 pFN receptors/cell and the binding affinity between pFN and its receptor is approximately 6 X 10(-5) M.     

Enterovirus 71 adsorption on metal ion-composite chitosan beads

In this study, we developed composite chitosan beads combining various metal ions, including Ni(2+), Cu(2+), Zn(2+), and Fe(2+), for direct adsorption of enterovirus 71 (EV71). The metal-ion species had significant effects on the adsorption capacity of beads. Among these metal ion-composite chitosan beads, Ni(2+)-chitosan beads exhibited the best adsorption capacity of EV71. Using a concentration of 0.01-M Ni(2+) was found to best provide for bead formation and EV71 adsorption. The adsorption of EV71 for Ni(2+)-chitosan beads at neutral or alkaline pH was favored. Under a competitive condition with albumin proteins, Ni(2+)-chitosan beads exhibited significant capacity of EV71 adsorption in culture media. The adsorption of EV71 on the Ni(2+)-chitosan beads was attributed to the strong binding between Ni(2+) ions chelated to the surface amino acid of EV71 capsids and Ni(2+) ions chelated on the chitosan materials. Moreover, the adsorbed EV71 retained its antigenicity and infectivity after desorption. The Ni(2+)-chitosan beads exhibit a promising application to EV71 adsorption and removal.     

Polymer support for exonucleolytic sequencing

Different kinds of particles were investigated for their potential use as supports for exonucleolytic sequence analysis. Composite beads composed of an unreactive polystyrene "core" and a "shell" of functionalized silica nanoparticles were found to best fulfill the various prerequisites. The biotin/streptavidin system was used for attachment of DNA to composite beads of 6 microm diameter. Applying M13 ssDNA in extremely high dilution (approximately 1 molecule versus 100 beads) with internal fluorescent labels, only a small fraction of beads was found to be associated with fluorescent entities, which likely correspond to a very small number of bound DNA molecules per particle. For better selection and transfer of DNA-containing beads into microstructures for exonuclease degradation the loading experiments were repeated with composite beads of 2.3 microm diameter. In this case a covalent bond was formed between carboxylate-functionalized beads and amino-terminated oligonucleotides, which were detected through external labelling with fluorescent nanoparticles interacting with biotinylated segments of the complementary strand.     

Alginate Beads as Synthetic Inoculant Carriers for Slow Release of Bacteria That Affect Plant Growth

Uniform synthetic beads were developed as carriers for the bacterial inoculation of plants. The beads are made of sodium alginate and skim milk and contain a large reservoir of bacterial culture which releases the bacteria at a slow and constant rate. The beads are biodegradable and produce no environmental pollution. The strength of the beads, the rate of bacterial release, and the time of their survival in the soil can be controlled by several hardening treatments. The final product, lyophilized beads, is simple to use and is applied to the seeds concomitantly with sowing. The released bacteria are available for root colonization immediately at seed germination. Dry beads containing bacteria can be stored at ambient temperature over a long period without loss of bacterial content; storage requires a limited space, and the quality control of a number of bacteria in the bead is simple. The level of plant inoculation with beads was similar to that with previously used peat inoculants, but the former method yielded more consistent results, as the frequency of inoculated plants was much higher. The former method provides a different approach for inoculation of plants with beneficial rhizosphere bacteria.     

Sulfasalazine release from alginate-N,O-carboxymethyl chitosan gel beads coated by chitosan

In the present study, spherical beads were prepared from a water-soluble chitosan (N,O-carboxymethyl chitosan, NOCC) and alginate with ionic gelation method. Then, swollen calcium–alginate–NOCC beads were coated with chitosan. To prepare drug loaded beads, sulfasalazine (SA) was added to the initial aqueous polymer solution. The effect of coating, as well as drying procedure, on the swelling behavior of unloaded beads and SA release of drug loaded ones were evaluated in simulated gastrointestinal tract fluid. The rate of swelling and drug release were decreased for air-dried and coated beads in comparison with freeze-dried and uncoated ones, respectively. No burst release of drug was observed from whole tested beads. Chitosan coated beads released approximately 40% of encapsulated drug in simulated gastric and small intestine tract fluid. Based on these results, the chitosan coated alginate–NOCC hydrogel may be used as potential polymeric carrier for colon-specific delivery of sulfasalazine.     

Superparamagnetic poly(methyl methacrylate) beads for nattokinase purification from fermentation broth

An effective method for purification of nattokinase from fermentation broth using magnetic poly(methyl methacrylate) (PMMA) beads immobilized with p-aminobenzamidine was proposed in this study. Firstly, magnetic PMMA beads with a narrow size distribution were prepared by spraying suspension polymerization. Then, they were highly functionalized via transesterification reaction with polyethylene glycol. The surface hydroxyl-modified magnetic beads obtained were further modified with chloroethylamine to transfer the surface amino-modified magnetic functional beads. The morphology and surface functionality of the magnetic beads were examined by scanning electron microscopy and Fourier transform infrared. An affinity ligand, p-aminobenzamidine was covalently immobilized to the amino-modified magnetic beads by the glutaraldehyde method for nattokinase purification directly from the fermentation broth. The purification factor and the recovery of the enzyme activity were found to be 8.7 and 85%, respectively. The purification of nattokinase from fermentation broth by magnetic beads only took 40 min, which shows a very fast purification of nattokinase compared to traditional purification methods.