Bacillus anthracis CapD, belonging to the gamma-glutamyltranspeptidase family, is required for the covalent anchoring of capsule to peptidoglycan

Several examples of bacterial surface-structure anchoring have been described, but they do not include polyglutamate capsule. Bacillus anthracis capsule, which is composed only of poly-gamma- d-glutamate, is one of the two major virulence factors of the bacterium. We analysed its anchoring. We report that the polyglutamate is anchored directly to the peptidoglycan and that the bond is covalent. We constructed a capD mutant strain, capD being the fourth gene of the capsule biosynthetic operon. The mutant bacilli are surrounded by polyglutamate material that is not covalently anchored. Thus, CapD is required for the covalent anchoring of polyglutamate to the peptidoglycan. Sequence similarities suggest that CapD is a gamma-glutamyltranspeptidase. Furthermore, CapD is cleaved at the gamma-glutamyltranspeptidase consensus cleavage site, and the two subunits remain associated, as necessary for gamma-glutamyltranspeptidase activity. Other Gram-positive gamma-glutamyltranspeptidases are secreted, but CapD is located at the Bacillus surface, associated both with the membrane and the peptidoglycan. Polyglutamate is hydrolysed by CapD indicating that it is a CapD substrate. We suggest that CapD catalyses the capsule anchoring reaction. Interestingly, the CapD(-) strain is far less virulent than the parental strain.     

Characterization of sporulation histidine kinases of Bacillus anthracis

The initiation of sporulation in Bacillus species is regulated by the phosphorelay signal transduction pathway, which is activated by several histidine sensor kinases in response to cellular and metabolic signals. Comparison of the protein components of the phosphorelay between Bacillus subtilis and Bacillus anthracis revealed high homology in the phosphorelay orthologs of Spo0F, Spo0B, and Spo0A. The sensor domains of sensor histidine kinases are poorly conserved between species, making ortholog recognition tenuous. Putative sporulation sensor histidine kinases of B. anthracis were identified by homology to the HisKA domain of B. subtilis sporulation sensor histidine kinases, which interacts with Spo0F. Nine possible kinases were uncovered, and their genes were assayed for complementation of kinase mutants of B. subtilis, for ability to drive lacZ expression in B. subtilis and B. anthracis, and for the effect of deletion of each on the sporulation of B. anthracis. Five of the nine sensor histidine kinases were inferred to be capable of inducing sporulation in B. anthracis. Four of the sensor kinases could not be shown to induce sporulation; however, the genes for two of these were frameshifted in all B. anthracis strains and one of these was also frameshifted in the pathogenic pXO1-bearing Bacillus cereus strain G9241. It is proposed that acquisition of plasmid pXO1 and pathogenicity may require a dampening of sporulation regulation by mutational selection of sporulation sensor histidine kinase defects. The sporulation of B. anthracis ex vivo appears to result from any one or a combination of the sporulation sensor histidine kinases remaining.     

Morphogenesis of the Bacillus anthracis spore

Bacillus spp. and Clostridium spp. form a specialized cell type, called a spore, during a multistep differentiation process that is initiated in response to starvation. Spores are protected by a morphologically complex protein coat. The Bacillus anthracis coat is of particular interest because the spore is the infective particle of anthrax. We determined the roles of several B. anthracis orthologues of Bacillus subtilis coat protein genes in spore assembly and virulence. One of these, cotE, has a striking function in B. anthracis: it guides the assembly of the exosporium, an outer structure encasing B. anthracis but not B. subtilis spores. However, CotE has only a modest role in coat protein assembly, in contrast to the B. subtilis orthologue. cotE mutant spores are fully virulent in animal models, indicating that the exosporium is dispensable for infection, at least in the context of a cotE mutation. This has implications for both the pathophysiology of the disease and next-generation therapeutics. CotH, which directs the assembly of an important subset of coat proteins in B. subtilis, also directs coat protein deposition in B. anthracis. Additionally, however, in B. anthracis, CotH effects germination; in its absence, more spores germinate than in the wild type. We also found that SpoIVA has a critical role in directing the assembly of the coat and exosporium to an area around the forespore. This function is very similar to that of the B. subtilis orthologue, which directs the assembly of the coat to the forespore. These results show that while B. anthracis and B. subtilis rely on a core of conserved morphogenetic proteins to guide coat formation, these proteins may also be important for species-specific differences in coat morphology. We further hypothesize that variations in conserved morphogenetic coat proteins may play roles in taxonomic variation among species.     

Bacillus species proteins involved in spore formation and degradation: from identification in the genome,to sequence analysis,and determination of function and structure

The members of Bacillus species are Gram-positive, ubiquitous spore-forming bacilli. Several genomic sequences have been made available during recent years, including Bacillus subtilis, a model organism among this genus, Bacillus anthracis, and their analyses provided a wealth of information about spore-forming bacteria. Some members of this species can cause serious diseases in livestock and humans. An important pathogen in this group of organisms is B. anthracis, which is the causative agent of anthrax. A summary of the B. subtilis genome information, based on the publicly released sequence, that allowed for the identification and characterization of new and novel proteins of this organism as well as similar proteins from other members of Bacillus species is provided. The primary goal for this work is to present a review of the genome sequence-identified genes that encode proteins involved in the sporulation, germination, and outgrowth processes. These three processes are essential for spore development and later its transformation into a vegetative cell. Additionally, for a few selected examples of the protein products of the identified genes, the application of bioinformatics and modeling tools is illustrated in order to determine their likely structure and function. Two three-dimensional models of the structures of such proteins, PrfA endonuclease and phosphatase PhoE, are presented together with the structure-based functional conclusions. The review of such studies provides an example of how the genomic sequence can be utilized in order to elucidate the structure and function of proteins, in particular proteins of the Bacillus species. Because only a limited number of proteins of Bacillus species organisms are involved in the synthesis and degradation of spores and have been characterized to date, this genome-based analysis may provide new insights into the developmental processes of bacterial organism.     

Production and cell surface anchoring of functional fusions between the SLH motifs of the Bacillus anthracis S-layer proteins and the Bacillus subtilis levansucrase

Many surface proteins of Gram-positive bacteria contain motifs, about 50 amino acids long, called S-layer homology (SLH) motifs. Bacillus anthracis, the causal agent of anthrax, synthesizes two S-layer proteins, each with three SLH motifs towards the amino-terminus. We used biochemical and genetic approaches to investigate the involvement of these motifs in cell surface anchoring. Proteinase K digestion produced polypeptides lacking these motifs, and stable three-motif polypeptides were produced in Escherichia coli that were able to bind the B. anthracis cell walls in vitro, demonstrating that the three SLH motifs were organized into a cell surface anchoring domain. We also determined the function of these SLH domains by constructing chimeric genes encoding the SLH domains fused to the normally secreted levansucrase of Bacillus subtilis. Cell fractionation and electron microscopy studies showed that each three-motif domain was sufficient for the efficient anchoring of levansucrase onto the cell surface. Proteins consisting of truncated SLH domains fused to levansucrase were unstable and associated poorly with the cell surface. Surface-exposed levansucrase retained its enzymatic and antigenic properties.     

A DNA microarray facilitates the diagnosis of Bacillus anthracis in environmental samples

Aims:  In order to improve the diagnosis of Bacillus anthracis in environmental samples, we established a DNA microarray based on the ArrayTube technology of Clondiag.
Methods and Results:  Total DNA of a bacterial colony is randomly biotinylated and hybridized to the array. The probes on the array target the virulence genes, the genomic marker gene rpoB , as well as the selective 16S rDNA sequence regions of B. anthracis , of the Bacillus cereus group and of Bacillus subtilis . Eight B. anthracis reference strains were tested and correctly identified. Among the analysed environmental Bacillus isolates, no virulent B. anthracis strain was detected.
Conclusions:  This array clearly differentiates B. anthracis from members of the B. cereus group and other Bacillus species in environmental samples by chromosomal ( rpoB ) and plasmid markers. Additionally, recognition of B. cereus strains harbouring the toxin genes or atypical B. anthracis strains that have lost the virulence plasmids is feasible.
Significance and Impact of the Study:  The array is applicable to the complex diagnostics for B. anthracis detection in environmental samples. Because of low costs, high security and easy handling, the microarray is applicable to routine diagnostics.     

Differential identification of Bacillus anthracis from environmental Bacillus species using microarray analysis

AIMS: To determine whether microarray analysis could be employed for the differential identification of a range of environmental Bacillus sp. from four strains of Bacillus anthracis. METHODS AND RESULTS: Oligonucleotide probes were designed that were specific to virulence factor genes of B. anthracis (pag, lef and cap), the variable number tandem repeat region of the B. anthracis vrrA gene and to the 16S-23S rRNA intergenic transcribed spacer region (ITS) and pleiotropic regulator (plcR) regions of the Bacillus cereus subgroup species. Generic probes were also designed to hybridize with conserved regions of the 16S rRNA genes of Bacillus (as a positive control), Neisseria sp., Pseudomonas sp., Streptococcus sp., Mycobacterium sp. and to all members of the Enterobacteriaceae to allow simultaneous detection of these bacteria. Identification of B. anthracis was found to rely entirely on hybridization of DNA specific to regions of the pag, lef and cap genes. Cross-reaction was observed between B. anthracis and other Bacillus species with all the other Bacillus probes tested. Results obtained using microarray hybridizations were confirmed using conventional microbiological techniques and found to have very high comparability. CONCLUSIONS: Microarray-based assays are an effective method for the identification of B. anthracis from mixed-culture environmental samples without problems of false-positivity that have been observed with conventional PCR assays. SIGNIFICANCE AND IMPACT OF THE STUDY: Identification of environmental Bacillus sp. by conventional PCR is prone to potential for reporting false-positives. This study provides a method for the exclusion of such isolates.     

Production of Bacillus anthracis protective antigen is dependent on the extracellular chaperone,PrsA

Protective antigen (PA) is a component of the Bacillus anthracis lethal and edema toxins and the basis of the current anthrax vaccine. In its heptameric form, PA targets host cells and internalizes the enzymatically active components of the toxins, namely lethal and edema factors. PA and other toxin components are secreted from B. anthracis using the Sec-dependent secretion pathway. This requires them to be translocated across the cytoplasmic membrane in an unfolded state and then to be folded into their native configurations on the trans side of the membrane, prior to their release from the environment of the cell wall. In this study we show that recombinant PA (rPA) requires the extracellular chaperone PrsA for efficient folding when produced in the heterologous host, B. subtilis; increasing the concentration of PrsA leads to an increase in rPA production. To determine the likelihood of PrsA being required for PA production in its native host, we have analyzed the B. anthracis genome sequence for the presence of genes encoding homologues of B. subtilis PrsA. We identified three putative B. anthracis PrsA proteins (PrsAA, PrsAB, and PrsAC) that are able to complement the activity of B. subtilis PrsA with respect to cell viability and rPA secretion, as well as that of AmyQ, a protein previously shown to be PrsA-dependent.     

Difference between the spore sizes of Bacillus anthracis and other Bacillus species

AIMS: To determine the size distribution of the spores of Bacillus anthracis, and compare its size with other Bacillus species grown and sporulated under similar conditions. METHODS AND RESULTS: Spores from several Bacillus species, including seven strains of B. anthracis and six close neighbours, were prepared and studied using identical media, protocols and instruments. Here, we report the spore length and diameter distributions, as determined by transmission electron microscopy (TEM). We calculated the aspect ratio and volume of each spore. All the studied strains of B. anthracis had similar diameter (mean range between 0.81 +/- 0.08 microm and 0.86 +/- 0.08 microm). The mean lengths of the spores from different B. anthracis strains fell into two significantly different groups: one with mean spore lengths 1.26 +/- 0.13 microm or shorter, and another group of strains with mean spore lengths between 1.49 and 1.67 microm. The strains of B. anthracis that were significantly shorter also sporulated with higher yield at relatively lower temperature. The grouping of B. anthracis strains by size and sporulation temperature did not correlate with their respective virulence. CONCLUSIONS: The spores of Bacillus subtilis and Bacillus atrophaeus (previously named Bacillus globigii), two commonly used simulants of B. anthracis, were considerably smaller in length, diameter and volume than all the B. anthracis spores studied. Although rarely used as simulants, the spores of Bacillus cereus and Bacillus thuringiensis had dimensions similar to those of B. anthracis. SIGNIFICANCE AND IMPACT OF THE STUDY: Spores of nonvirulent Bacillus species are often used as simulants in the development and testing of countermeasures for biodefence against B. anthracis. The data presented here should help in the selection of simulants that better resemble the properties of B. anthracis, and thus, more accurately represent the performance of collectors, detectors and other countermeasures against this threat agent.     

UV resistance of Bacillus anthracis spores revisited: validation of Bacillus subtilis spores as UV surrogates for spores of B. anthracis Sterne

Recent bioterrorism concerns have prompted renewed efforts towards understanding the biology of bacterial spore resistance to radiation with a special emphasis on the spores of Bacillus anthracis. A review of the literature revealed that B. anthracis Sterne spores may be three to four times more resistant to 254-nm-wavelength UV than are spores of commonly used indicator strains of Bacillus subtilis. To test this notion, B. anthracis Sterne spores were purified and their UV inactivation kinetics were determined in parallel with those of the spores of two indicator strains of B. subtilis, strains WN624 and ATCC 6633. When prepared and assayed under identical conditions, the spores of all three strains exhibited essentially identical UV inactivation kinetics. The data indicate that standard UV treatments that are effective against B. subtilis spores are likely also sufficient to inactivate B. anthracis spores and that the spores of standard B. subtilis strains could reliably be used as a biodosimetry model for the UV inactivation of B. anthracis spores.     

Identification and characterization of the ccdA gene, required for cytochrome c synthesis in Bacillus subtilis.

The gram-positive, endospore-forming bacterium Bacillus subtilis contains several membrane-bound c-type cytochromes. We have isolated a mutant pleiotropically deficient in cytochromes c. The responsible mutation resides in a gene which we have named ccdA (cytochrome c defective). This gene is located at 173 degrees on the B. subtilis chromosome. The ccdA gene was found to be specifically required for synthesis of cytochromes of the c type. CcdA is a predicted 26-kDa integral membrane protein with no clear similarity to any known cytochrome c biogenesis protein but seems to be related to a part of Escherichia coli DipZ/DsbD. The ccdA gene is cotranscribed with two other genes. These genes encode a putative 13.5-kDa single-domain response regulator, similar to B. subtilis CheY and Spo0F, and a predicted 18-kDa hydrophobic protein with no similarity to any protein in databases, respectively. Inactivation of the three genes showed that only ccdA is required for cytochrome c synthesis. The results also demonstrated that cytochromes of the c type are not needed for growth of B. subtilis.     

A randomly amplified polymorphic DNA marker specific for the Bacillus cereus group is diagnostic for Bacillus anthracis

Aiming to develop a DNA marker specific for Bacillus anthracis and able to discriminate this species from Bacillus cereus, Bacillus thuringiensis, and Bacillus mycoides, we applied the randomly amplified polymorphic DNA (RAPD) fingerprinting technique to a collection of 101 strains of the genus Bacillus, including 61 strains of the B. cereus group. An 838-bp RAPD marker (SG-850) specific for B. cereus, B. thuringiensis, B. anthracis, and B. mycoides was identified. This fragment included a putative (366-nucleotide) open reading frame highly homologous to the ypuA gene of Bacillus subtilis. The restriction analysis of the SG-850 fragment with AluI distinguished B. anthracis from the other species of the B. cereus group.     

Molecular characterization and protein analysis of the cap region, which is essential for encapsulation in Bacillus anthracis.

By using genetic complementation tests with various in vitro-constructed mutants with mutations in the cap region (which is essential for encapsulation in Bacillus anthracis), we identified three cistrons, capB, capC, and capA, in this order of arrangement. Minicell analysis revealed that these cistrons produce proteins of 44, 16, and 46 kilodaltons, respectively. The complete nucleotide sequence of 3,244 base pairs covering the whole cap region was determined and revealed the existence of the three open reading frames of capB (397 amino acid residues; molecular weight, 44,872), capC (149 amino acid residues; molecular weight, 16,522), and capA (411 amino acid residues; molecular weight, 46,420) arranged in the order predicted by complementation tests. These three cistrons were all transcribed in the same direction from promoters unique to each cistron. Judging from the predicted amino acid sequence of the three proteins and from their localization and their sensitivity to various physicochemical treatments, they appeared to be membrane-associated enzymes mediating the polymerization of D-glutamic acid via the membrane. Capsular peptides immunologically identical to that of B. anthracis were found in B. subtilis, B. megaterium, and B. licheniformis, but no sequence homologous to the cap region was found in any of these bacilli other than B. anthracis. Using strains of B. anthracis with or without insertional inactivation of the cap region, we found that the capsule of B. anthracis conferred strong resistance to phagocytosis upon the bacterial host.     

Formaldehyde gas inactivation of Bacillus anthracis, Bacillus subtilis, and Geobacillus stearothermophilus spores on indoor surface materials

AIMS: To evaluate the decontamination of Bacillus anthracis, Bacillus subtilis, and Geobacillus stearothermophilus spores on indoor surface materials using formaldehyde gas. METHODS AND RESULTS: B. anthracis, B. subtilis, and G. stearothermophilus spores were dried on seven types of indoor surfaces and exposed to approx. 1100 ppm formaldehyde gas for 10 h. Formaldehyde exposure significantly decreased viable B. anthracis, B. subtilis, and G. stearothermophilus spores on all test materials. Significant differences were observed when comparing the reduction in viable spores of B. anthracis with B. subtilis (galvanized metal and painted wallboard paper) and G. stearothermophilus (industrial carpet and painted wallboard paper). Formaldehyde gas inactivated>or=50% of the biological indicators and spore strips (approx. 1x10(6) CFU) when analyzed after 1 and 7 days. CONCLUSIONS: Formaldehyde gas significantly reduced the number of viable spores on both porous and nonporous materials in which the two surrogates exhibited similar log reductions to that of B. anthracis on most test materials. SIGNIFICANCE AND IMPACT OF THE STUDY: These results provide new comparative information for the decontamination of B. anthracis spores with surrogates on indoor surfaces using formaldehyde gas.     

Phenotypic and genotypic characterization of B.t.LDC-391 strain that produce cytocidal proteins against human cancer cells

An indigenous Bacillus thuringiensis strain B.t.LDC-391 producing cytocidal proteins against human colon cancer cell line, HCT-116, was subjected to phenotypic and genotypic characterization to evaluate its relatedness to B.anthracis. The morphological features of this strain were meta-analyzed with data of other parasporin and insecticidal protein producing Bacillus thuringiensis strains. The conventional biochemical analysis and antibiotic sensitivity test proved it as an ampicillin resistant which is a salient feature, absent in B.anthracis Ames. PCR analysis showed the absence of cyt and parasporin related genes in the genome of B.t.LDC-391. But the strain was positive for cap gene. The sequencing and bio-informatic analysis of cap gene and 16S rDNA of B.t.LDC-391 placed it closer to B.thuringiensis and revealed significant divergence from that of any B.anthracis strain. However our strain lacked β- hemolysis on human erythrocytes which is a common feature of B.anthracis strains and parasporin producers.     

Siderophores of Bacillus anthracis, Bacillus cereus, and Bacillus thuringiensis

Three Bacillus anthracis Sterne strains (USAMRIID, 7702, and 34F2) and Bacillus cereus ATCC 14579 excrete two catecholate siderophores, petrobactin (which contains 3,4-dihydroxybenzoyl moieties) and bacillibactin (which contains 2,3-dihydroxybenzoyl moieties). However, the insecticidal organism Bacillus thuringiensis ATCC 33679 makes only bacillibactin. Analyses of siderophore production by previously isolated [Cendrowski et al., Mol. Microbiol. 52 (2004) 407-417] B. anthracis mutant strains revealed that the B. anthracis bacACEBF operon codes for bacillibactin production and the asbAB gene region is required for petrobactin assembly. The two catecholate moieties also were synthesized by separate routes. PCR amplification identified both asbA and asbB genes in the petrobactin producing strains whereas B. thuringiensis ATCC 33679 retained only asbA. Petrobactin synthesis is not limited to the cluster of B. anthracis strains within the B. cereus sensu lato group (in which B. cereus, B. anthracis, and B. thuringiensis are classified), although petrobactin might be prevalent in strains with pathogenic potential for vertebrates.     

BslA, a pXO1-encoded adhesin of Bacillus anthracis

The Gram-positive pathogen Bacillus anthracis causes anthrax, a fulminant and lethal infection of mammals. Two large virulence plasmids, pXO1 and pXO2, harbour genes required for anthrax pathogenesis and encode secreted toxins or provide for the poly γ- d -glutamic acid capsule. In addition to capsule, B. anthracis harbours additional cell wall envelope structures, including the surface layer (S-layer), which is composed of crystalline protein arrays. We sought to identify the B. anthracis envelope factor that mediates adherence of vegetative forms to human cells and isolated BslA ( B . anthracis S - l ayer protein A ). Its structural gene, bslA , is located on the pXO1 pathogenicity island (pXO1-90) and bslA expression is both necessary and sufficient for adherence of vegetative forms to host cells. BslA assembly into S-layers and surface exposure is presumably mediated by three N-terminal SLH domains. Twenty-three B. anthracis genes, whose products harbour similar SLH domains, may provide additional surface molecules that allow bacilli to engage cells or tissues of specific hosts during anthrax pathogenesis.