Controlled self-assembly of actin filaments for dynamic biodevices

We investigated the immobilization of actin filaments and its self-assembly in vitro in a continuous-flow system on poly(styrene-maleic acid) (PSMA), poly(methyl methacrylate) (PMMA), poly(t-butyl methacrylate) [P(tBuMA)] polymeric surfaces and along the linear channels. Among these polymeric surfaces, PSMA appeared to be more suitable for supramolecular manipulations as it lacked inherent fluorescence, had good biocompatibility with actin-myosin, and provided sufficient amounts of binding sites for the covalent immobilization of actin. Covalent attachment of G-actin on PSMA polymeric surfaces resulted in stable polymerization followed by alignment of filaments over 1.5 h, along with a greater surface density of the proteins. It is shown that electrostatic condensation of intact F-actin filaments and F-actin/gelsolin filaments with Ba²⁺ can be successfully used for progressive bundle formation and alignment in the constant flow. Actin bundles retained their ability to support HMM-anti-HMM bead translocation. Long-range cooperative transitions in actin induced by gelsolin represent a structural perturbation of the barbed end and presumably result in regularly organized bundles that secure directional movement. This simple technique for fabrication of self-assembled and aligned F-actin/gelsolin bundles provides a convenient experimental system for nanotechnological applications.     

Nanoscale fabrication of biomolecular layer and its application to biodevices

Biodevices composed of biomolecular layer have been developed in various fields such as medical diagnosis, pharmaceutical screening, electronic device, photonic device, environmental pollution detection device, and etc. The biomolecules such as protein, DNA and pigment, and cells have been used to construct the biodevices such as biomolecular diode, biostorage device, bioelectroluminescence device, protein chip, DNA chip, and cell chip. Substantial interest has focused upon thin film fabrication or the formation of biomaterials mono- or multi-layers on the solid surfaces to construct the biodevices. Based on the development of nanotechnology, nanoscale fabrication technology for biofilm has been emerged and applied to biodevices due to the various advantages such as high density immobilization and orientation control of immobilized biomolecules. This review described the nanoscale fabrication of biomolecular film and its application to bioelectronic devices and biochips.     

Nanotechnology in respiratory medicine

Like two sides of the same coin, nanotechnology can be both boon and bane for respiratory medicine. Nanomaterials open new ways in diagnostics and treatment of lung diseases. Nanoparticle based drug delivery systems can help against diseases such as lung cancer, tuberculosis, and pulmonary fibrosis. Moreover, nanoparticles can be loaded with DNA and act as vectors for gene therapy in diseases like cystic fibrosis. Even lung diagnostics with computer tomography (CT) or magnetic resonance imaging (MRI) profits from new nanoparticle based contrast agents. However, the risks of nanotechnology also have to be taken into consideration as engineered nanomaterials resemble natural fine dusts and fibers, which are known to be harmful for the respiratory system in many cases. Recent studies have shown that nanoparticles in the respiratory tract can influence the immune system, can create oxidative stress and even cause genotoxicity. Another important aspect to assess the safety of nanotechnology based products is the absorption of nanoparticles. It was demonstrated that the amount of pulmonary nanoparticle uptake not only depends on physical and chemical nanoparticle characteristics but also on the health status of the organism. The huge diversity in nanotechnology could revolutionize medicine but makes safety assessment a challenging task.     

硅藻纳米技术

硅藻是一类微小的单细胞藻类,具有由无定形氧化硅组成的坚硬细胞壁(硅壳).硅壳具有精致的形态和结构,且随硅藻种类和生长条件不同而千变万化.目前估算的硅藻种类超过200 000种,其独特的纳米结构对光子结构、化学生物传感器、新纳米材料和器件的开发具有启发意义.同时硅藻形态形成学和分子生物学的研究,可以推动硅质材料的仿生合成...     

Hazard Reduction in Nanotechnology

The release of hazardous substances is a matter of concern for nanotechnology. This may include some nanoparticles, reactants, by‐products, and solvents. The use of low‐hazard solvents may reduce the hazards from nanoparticle production and nanomaterial processing. The hazards of inorganic nanoparticles may be reduced by modifying their chemical composition, surface characteristics, or structure. In nanomedicine, optimizing the balance between persistence and excretion and preventing the release of toxic degradation products may reduce hazard. In applications of fixed inorganic nanoparticles, the focus should be on preventing the release of such particles and of hazardous compounds during the product life cycle. When, after exhaustion of known hazard reduction options, significant hazard remains, other approaches merit consideration.     

生物大分子自组装合成多维纳米生物结构与器件

生物体通过指导的自组装合成种类繁多、功能特异的天然纳米结构,它们在生命过程中扮演重要角色。按照自组装体的维度,可以分为线状(一维)、层状(二维)、笼状(三维)生物纳米结构。通过设计,这些生物大分子纳米结构可在细胞"工厂"中重组制备,且可通过合成生物学技术对其组装和功能化进行理性设计和调控,成为功能性纳米器件。这类纳米生物结构和器件已经在生物传感、催化、肿瘤热疗、药物递送、组织工程、生物电池等领域获得展示或应用。相关研究正在成为合成生物学和纳米生物学的一个交叉领域,受到关注。     

Nanotechnology meets electrophysiology

1. Download : Download high-res image (107KB)
2. Download : Download full-size image

Highlights► We focus on the latest developments in nanotechnology-based electrophysiology. ► Methods for extracellular recording via nanoFET-based devices are described. ► Metal nanoelectrodes for the recording of electrogenic cells are reviewed. ► The latest developments of intracellular FET-based probes are shortly covered. ► Pioneering electrical scaffold devices for the interfacing with tissues are described.     

Nanotechnology and biosensors

Nanotechnology is playing an increasingly important role in the development of biosensors. The sensitivity and performance of biosensors is being improved by using nanomaterials for their construction. The use of these nanomaterials has allowed the introduction of many new signal transduction technologies in biosensors. Because of their submicron dimensions, nanosensors, nanoprobes and other nanosystems have allowed simple and rapid analyses in vivo. Portable instruments capable of analyzing multiple components are becoming available. This work reviews the status of the various nanostructure-based biosensors. Use of the self-assembly techniques and nano-electromechanical systems (NEMS) in biosensors is discussed.     

Nanotechnology in Medicine: Nanofilm Biomaterials

By interrogating nature at the length scale of important biological molecules(proteins, DNA), nanotechnology offers great promise to biomedicine. We reviewhere our recent work on nanofilm biomaterials: “nanoscopically” thin,functional, polymer-based films serving as biocompatible interfaces. In onethrust, films containing carbon nanotubes are shown to be highly antimicrobialand, thus, to be promising as biomedical device materials inherently resistiveto microbial infection. In another thrust, strategies are developed toward filmsof independently controllable bioactivity and mechanical rigidity — two keyvariables governing typical biological responses.     

纳米技术与生物学实验的微型化

纳米技术是近年来发展迅速的新技术,有着几乎无限的潜力。一方面生物分子的尺度是纳米与亚纳米级的,纳米技术可以从生物科学学到许多生物分子作用的奥秘;另一方面,纳米技术为生物学的研究提供新材料、新方法,使生物学研究可以多快好省地进行。本文简单介绍几种利用纳米技术开展生物学研究的思路与方法。     

Nanotechnology and Protein Mechanics

The atomic force microscope is currently used in our and many other laboratories to measure the mechanical response of polypeptide and proteins against tensile forces applied to well defined positions in their chemical structures. The resulting force vs. extension (F-E) curves are analyzed in relation to their known conformations under various conditions. The method can be extended to study the mechanical responses of other, often much larger biological structures, and extract the component proteins and DNAs from cell membranes and chromosomes.