Purification and biochemical characterization of a soluble human interferon gamma receptor expressed in Escherichia coli

We purified and characterized a soluble human interferon gamma receptor expressed in Escherichia coli. The soluble receptor comprises the amino acids 15-246 of the encoded protein (Aguet, M., Dembic, Z., and Merlin, G. (1988) Cell 55, 273-280) and was purified from large scale fermentations through four chromatographic steps with an overall recovery of 28%. The refolded soluble receptor shows some heterogeneity on nonreducing sodium dodecyl sulfate-polyacrylamide gel electrophoresis, where it appears as the major band of 27 kDa molecular mass, accompanied by a few minor bands with molecular masses between 26 and 30 kDa. On reducing sodium dodecyl sulfate-polyacrylamide gel electrophoresis it appears as a homogeneous protein of 32 kDa molecular mass. The soluble interferon gamma receptor is an active and stable protein and is recognized by specific antibodies raised against the native receptor. When nonreduced it has the capacity to specifically bind interferon gamma and to compete for the binding of interferon gamma to the cell surface receptor. The observed heterogeneity of the soluble interferon gamma receptor under nonreducing electrophoretic conditions is probably due to different conformational forms resulting from the formation of non-native intramolecular disulfide bonds among the 8 cysteine residues present in the soluble interferon gamma receptor molecule.     

Disulfide bond formation during the folding of influenza virus hemagglutinin

To study the importance of individual sulfhydryl residues during the folding and assembly in vivo of influenza virus hemagglutinin (HA), we have constructed and expressed a series of mutant HA proteins in which cysteines involved in three disulfide bonds have been substituted by serine residues. Investigations of the structure and intracellular transport of the mutant proteins indicate that (a) cysteine residues in the ectodomain are essential both for efficient folding of HA and for stabilization of the folded molecule; (b) cysteine residues in the globular portion of the ectodomain are likely to form native disulfide bonds rapidly and directly, without involvement of intermediate, nonnative linkages; and (c) cysteine residues in the stalk portion of the ectodomain also appear not to form intermediate disulfide bonds, even though they have the opportunity to do so, being separated from their correct partners by hundreds of amino acids including two or more other sulfhydryl residues. We propose a role for the cellular protein BiP in shielding the cysteine residues of the stalk domain during the folding process, thus preventing them from forming intermediate, nonnative disulfide bonds.     

Accumulation of β-conglycinin in soybean cotyledon through the formation of disulfide bonds between α'- and α-subunits

β-Conglycinin, one of the major soybean (Glycine max) seed storage proteins, is folded and assembled into trimers in the endoplasmic reticulum and accumulated into protein storage vacuoles. Prior experiments have used soybean β-conglycinin extracted using a reducing buffer containing a sulfhydryl reductant such as 2-mercaptoethanol, which reduces both intermolecular and intramolecular disulfide bonds within the proteins. In this study, soybean proteins were extracted from the cotyledons of immature seeds or dry beans under nonreducing conditions to prevent the oxidation of thiol groups and the reduction or exchange of disulfide bonds. We found that approximately half of the α'- and α-subunits of β-conglycinin were disulfide linked, together or with P34, prior to amino-terminal propeptide processing. Sedimentation velocity experiments, size-exclusion chromatography, and two-dimensional polyacrylamide gel electrophoresis (PAGE) analysis, with blue native PAGE followed by sodium dodecyl sulfate-PAGE, indicated that the β-conglycinin complexes containing the disulfide-linked α'/α-subunits were complexes of more than 720 kD. The α'- and α-subunits, when disulfide linked with P34, were mostly present in approximately 480-kD complexes (hexamers) at low ionic strength. Our results suggest that disulfide bonds are formed between α'/α-subunits residing in different β-conglycinin hexamers, but the binding of P34 to α'- and α-subunits reduces the linkage between β-conglycinin hexamers. Finally, a subset of glycinin was shown to exist as noncovalently associated complexes larger than hexamers when β-conglycinin was expressed under nonreducing conditions.     

High throughput screening of disulfide‐containing proteins in a complex mixture

The formation of disulfide bonds between cysteine residues is crucial for the stabilization of native protein structures and, thus, determination of disulfide linkages is an important facet of protein structural characterization. Nonetheless, the identification of disulfide bond linkages remains a significant analytical challenge, particularly in large proteins with complex disulfide patterns. Herein, we have developed a new LC/MS strategy for rapid screening of disulfides in an intact protein mixture after a straightforward reduction step with tris(2‐carboxyethyl)phosphine. LC/MS analysis of reduced and nonreduced protein mixtures quickly revealed disulfide‐containing proteins owing to a 2 Da mass increase per disulfide reduction and, subsequently, the total number of disulfide bonds in the intact proteins could be determined. We have demonstrated the effectiveness of this method in a protein mixture composed of both disulfide‐containing and disulfide‐free proteins. Our method is simple (no need for proteolytic digestion, alkylation, or the removal of reducing agents prior to MS analysis), high throughput (fast on‐line LC/MS analysis), and reliable (no S–S scrambling), underscoring its potential as a rapid disulfide screening method for proteomics applications.     

Sulfhydryl group content of chicken progesterone receptor: effect of oxidation on DNA binding activity

DNA binding activity of chicken progesterone receptor B form (PRB) and A form (PRA) has been examined. This activity is strongly dependent upon the presence of thiols in the buffer. Stability studies showed that PRB was more sensitive to oxidation than was PRA. Receptor preparations were fractionated by DNA-cellulose chromatography to DNA-positive and DNA-negative subpopulations, and sulfhydryl groups were quantified on immunopurified receptor by labeling with [3H]-N-ethylmaleimide. Labeling of DNA-negative receptors with [3H]-N-ethylmaleimide showed 21-23 sulfhydryl groups on either PRA or PRB form when the proteins were reduced and denatured. A similar number was seen without reduction if denatured DNA-positive receptor species were tested. In contrast, the DNA-negative PRB had only 10-12 sulfhydryl groups detectable without reduction. A similar number (12-13 sulfhydryl groups) was found for PRA species that lost DNA binding activity after exposure to a nonreducing environment in vitro. We concluded that the naturally occurring receptor forms unable to bind to DNA, as well as receptor forms that have lost DNA binding activity due to exposure to a nonreducing environment in vitro, contain 10-12 oxidized cysteine residues, likely present as disulfide bonds. Since we were unable to reduce the disulfide bonds when the native DNA-negative receptor proteins were treated with dithiothreitol (DTT), we speculate that irreversible loss of DNA binding activity of receptor in vitro is due to oxidation of cysteine residues that are not accessible to DTT in the native state.     

Identification of the P proteins and other disulfide-linked and phosphorylated proteins of Newcastle disease virus.

A unique abundant protein, designated P by analogy to the putative polymerase proteins of other paramyxoviruses, was identified in purified Newcastle disease virus. Under nonreducing conditions the P proteins could be separated from other viral proteins on sodium dodecyl sulfate-polyacrylamide gels. The P proteins were isolated from detergent-solubilized virions as 53,000- to 55,000-dalton monomers and disulfide-linked trimers. Distinct forms of P having four different isoelectric points and two different electrophoretic mobilities were resolved by two-dimensional electrophoresis. Two forms of P were phosphorylated, as were the nucleocapsid protein and non-glycosylated membrane protein. In addition to disulfide-linked forms of P, dimers of the hemagglutinin-neuraminidase glycoprotein and two disulfide-linked versions of the fusion glycoprotein were identified. Several electrophoretic variants of the nucleocapsid protein that were probably created by intrachain disulfide bonding were also isolated from virions under nonreducing conditions. The locations of the newly identified proteins were determined by detergent-salt fractionation of virions and by surface-selective radioiodination of the viral envelope. The P proteins were associated with nucleocapsids and were not detected at the surface of virions. Both forms of the fusion glycoproteins were on the exterior of the viral envelope. Herein the properties of the P proteins are compared with similar proteins of rhabdoviruses and other paramyxoviruses, and a role for multiple forms of proteins in the genetic economy of newcastle disease virus is discussed.     

Unfolding intermediates of the extracellular domain of the interferon gamma receptor.

Reduction of proteins which require disulfide bonds to be stable in the folded state is accompanied by step-wise unfolding. A soluble human interferon gamma receptor produced in Escherichia coli was used to investigate the kinetics of formation of unfolding intermediates. The protein includes 8 cysteine residues forming four disulfide bonds. It was reduced by using either dithiothreitol or the thioredoxin reduction system. Reduction with dithiothreitol resulted in formation of mainly four monomeric unfolding species as visualized by sodium dodecyl sulfate-polyacrylamide gels. The enzymatically catalyzed reaction produced only small amounts of two monomeric products and mostly delivered oligomeric and polymeric forms. In both cases, the ligand binding capacity of the receptor was significantly reduced immediately after appearance of the first intermediate. The intermediates involved interchange of disulfide bonds and did not show ligand binding capacity. Some of them were recognized by specific antibodies which detect conformational epitopes on the native interferon gamma receptor. On the basis of the antibody binding, a preliminary characterization of the formed intermediates was attempted. When the soluble receptor was reduced in the presence of denaturing agents, the reduction products were different from the unfolding intermediates generated in the absence of denaturants.     

Functional analysis of a disulfide bond in the cardiac Na(+)-Ca(2+) exchanger

The electrophoretic mobility of the cardiac Na(+)-Ca(2+) exchange protein is different under reducing and nonreducing conditions. This mobility shift is eliminated in a cysteine-less exchanger, suggesting that the presence or absence of an intramolecular disulfide bond alters the conformation and mobility of the exchanger. Using cysteine mutagenesis and biochemical analysis, we have identified the cysteine residues involved in the disulfide bond. Cysteine 792 in loop h of the exchanger forms a disulfide bond with either cysteine 14 or 20 near the NH(2) terminus. Because the NH(2) terminus is extracellular, the data establish that loop h must also be extracellular. A rearrangement of disulfide bonds has previously been implicated in the stimulation of exchange activity by combinations of reducing and oxidizing agents. We have investigated the role of cysteines in the stimulation of the exchanger by the combination of FeSO(4) and dithiothreitol (Fe-DTT). Using the giant excised patch technique, we find that stimulation of the wild type exchanger by Fe-DTT is primarily due to the removal of a Na(+)-dependent inactivation process. Analysis of mutated exchangers, however, indicates that cysteines are not responsible for stimulation of the exchange activity by Fe-DTT. Ca(2+) blocks modification of the exchanger by Fe-DTT. Disulfide bonds are not involved in redox stimulation of the exchanger, and the modification reaction is unknown. Modulation of Na(+)-dependent inactivation may be a general mechanism for regulation of Na(+)-Ca(2+) exchange activity and may have physiological significance.     

Assignment of interchain disulfide bonds in platelet-derived growth factor (PDGF) and evidence for agonist activity of monomeric PDGF.

Platelet-derived growth factor (PDGF) is a dimeric factor stabilized by disulfide bonds. Using an approach involving partial reduction of PDGF, we have identified the 2nd and 4th cysteine residues in the PDGF chains as the cysteine residues forming interchain disulfide bonds. Analysis of PDGF mutants in which the 2nd and 4th cysteine residues were mutated to serine residues revealed that the disulfide bonds are arranged in a cross-wise manner, with the 2nd cysteine residue in one chain being linked to the 4th cysteine residue in the other. A PDGF B-chain mutant, in which both the 2nd and 4th cysteine residues were substituted with serine residues, migrated as a monomer in sodium dodecyl sulfate gel electrophoresis and retained receptor binding activity. When analyzed in receptor dimerization and autophosphorylation assays, this mutant showed agonistic activity. Thus, structural information has been obtained that will allow the large scale production of properly folded monomeric PDGF, as well as design of specific PDGF heterodimers.     

Mode of disulfide bond formation of a heat-stable enterotoxin (STh) produced by a human strain of enterotoxigenic Escherichia coli

To determine the modes of three disulfide linkages in the heat-stable enterotoxin (STh) produced by a human strain of enterotoxigenic Escherichia coli, we synthesized STh(6-18), which consists of 13 amino acid residues and has the same intramolecular disulfide linkages as native STh [(1985) FEBS Lett. 181, 138-142], by stepwise and selective formation of disulfide bonds using different types of removable protecting groups for the Cys residues. Synthesis of the peptide with different modes of disulfide bond formation provided three peptides consistent with standard STh(6-18) in their physicochemical and biological properties, thereby indicating that the disulfide bonds in STh(6-18) are Cys-Cys-Glu-Leu-Cys-Cys-Asn-Pro-Ala-Cys-Thr-Gly-Cys.     

Extraction and Isolation of Antifreeze Proteins from Winter Rye (Secale cereale L.) Leaves

Apoplastic extracts of cold-acclimated winter rye (Secale cereale L. cv Musketeer) leaves were previously shown to exhibit antifreeze activity. The objectives of the present study were to identify and characterize individual antifreeze proteins present in the apoplastic extracts. The highest protein concentrations and antifreeze activity were obtained when the leaf apoplast was extracted with ascorbic acid and either CaCl2 or MgSO4. Seven major polypeptides were purified from these extracts by one-dimensional sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis under nonreducing conditions. The five larger polypeptides, of 19, 26, 32, 34, and 36 kD, exhibited significant levels of antifreeze activity, whereas the 11- and 13-kD polypeptides showed only weak activity. Five of these polypeptides migrated with higher apparent molecular masses on SDS gels after treatment with 0.1 M dithiothreitol, which indicated the presence of intramolecular disulfide bonds. The apparent reduction of the disulfide bonds did not eliminate antifreeze activity in four of the polypeptides that contained intramolecular disulfide bonds and exhibited significant levels of antifreeze activity. The amino acid compositions of these polypeptides were similar in that they were all relatively enriched in the residues Asp/Asn, Glu/Gln, Ser, Thr, Gly, and Ala; they all lacked His, except for the 26-kD polypeptide, and they contained up to 5% Cys residues. These polypeptides were examined with antisera to other cystine-containing antifreeze proteins from fish and insects, and no common epitopes were detected. We conclude that cold-acclimated winter rye leaves produce multiple polypeptides with antifreeze activity that appear to be distinct from antifreezes produced by fish and insects.     

Formation of native-like mammalian sperm cell chromatin with folded bull protamine

The DNA of most vertebrate sperm cells is packaged by protamines. The primary structure of mammalian protamine I can be divided into three domains, a central DNA binding domain that is arginine-rich and amino- and carboxyl-terminal domains that are rich in cysteine residues. In native bull sperm chromatin, intramolecular disulfide bonds hold the terminal domains of bull protamine folded back onto the central DNA binding domain, whereas intermolecular disulfide bonds between DNA-bound protamines help stabilize the chromatin of mature mammalian sperm cells. Folded bull protamine was used to condense DNA in vitro under various solution conditions. Using transmission electron microscopy and light scattering, we show that bull protamine forms particles with DNA that are morphologically similar to the subunits of native bull sperm chromatin. In addition, the stability provided by intermolecular disulfide bonds formed between bull protamine molecules within in vitro DNA condensates is comparable with that observed for native bull sperm chromatin. The importance of the bull protamine terminal domains in controlling the bull sperm chromatin morphology is indicated by our observation that DNA condensates formed under identical conditions with a fish protamine, which lacks cysteine-rich terminal domains, do not produce as uniform structures as bull protamine. A model is also presented for the bull protamine.DNA complex in native sperm cell chromatin that provides an explanation for the positions of the cysteine residues in bull protamine that form intermolecular disulfide bonds.     

Disulfide bond structure determination and biochemical analysis of glycoprotein C from herpes simplex virus.

A biochemical analysis of glycoprotein C (gC of herpes simplex virus was undertaken to further characterize the structure of the glycoprotein and to determine its disulfide bond arrangement. We used three recombinant forms of gC, gC1(457t), gC1(delta33-123t), and gC2(426t), each truncated prior to the transmembrane region. The proteins were expressed and secreted by using a baculovirus expression system and have been shown to bind to monoclonal antibodies which recognize discontinuous epitopes and to complement component C3b in a dose-dependent manner. We confirmed the N-terminal residues of each mature protein by Edman degradation and confirmed the internal deletion in gC1(delta33-123t). The molecular weight and extent of glycosylation of gC1 (457t), gC1(delta33-123t), and gC2(426t) were determined by treating each protein with endoglycosidases and then subjecting it to sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and mass spectrometric analysis. The data indicate that eight to nine of the predicted N-linked oligosaccharide sites on gC1(457t) are occupied by glycans of approximately 1,000 Da. In addition, O-linked oligosaccharides are present on gC1(457t), primarily localized to the N-terminal region (amino acids [aa] 33 to 123) of the protein. gC2(426t) contains N-linked oligosaccharides, but no O-linked oligosaccharides were detected. To determine the disulfide bond arrangement of the eight cysteines of gC1(457t),the protein was cleaved with cyanogen bromide. SDS-PAGE analysis followed by Edman degradation identified three cysteine-containing fragments which are not connected by disulfide linkages. Chemical modification of cysteines combined with matrix-assisted laser desorption ionization mass spectrometry identified disulfide bonds between cysteine 1 (aa 127) and cysteine 2 (aa 144) and between cysteine 3 (aa 286) and cysteine 4 (aa 347). Further proteolysis of the cyanogen bromide-generated fragment containing cysteine 5 through cysteine 8, combined with mass spectrometry and Edman degradation, showed that disulfide bonds link cysteine 5 (aa 386) to cysteine 8 (aa 442) and cysteine 6 (aa 390) to cysteine 7 (aa 419). A similar disulfide bond arrangement is postulated to exist in gC homologs from other herpesviruses.     

The structure of the murine Fc receptor for IgG. Assignment of intrachain disulfide bonds, identification of N-linked glycosylation sites, and evidence for a fourth form of Fc receptor

The Fc receptor (Fc gamma R) of the murine macrophage cell line, J774, was purified by immunoaffinity chromatography then subjected to sodium dodecyl sulfate-polyacrylamide gel electrophoresis and amino-terminal sequencing. FcR material judged to be pure by these criteria was digested with a number of enzymes to identify the cysteine residues engaged in disulfide bonds within the native structure. The results clearly establish that the mouse macrophage Fc gamma R contains two intrachain disulfide bonds, each of which connects adjacent cysteine residues within the two putative extracellular domains of the molecule. In addition, each disulfide-bonded domain was shown to contain two authentic sites of N-linked glycosylation. Extensive peptide sequencing resulted in the unexpected identification of peptide fragments from a fourth Fc gamma R whose sequences were highly homologous to sequences surrounding the two Cys residues in the amino-terminal domain of both alpha and beta 1 Fc gamma R. The fourth Fc gamma R contains a disulfide-bonded amino-terminal domain similar to beta 1 Fc gamma R.     

Evidence for intramolecular disulfide bond shuffling in the folding of mutant human lysozyme

Our previous results using the Saccharomyces cerevisiae secretion system suggest that intramolecular exchange of disulfide bonds occurs in the folding pathway of human lysozyme in vivo (Taniyama, Y., Yamamoto, Y., Kuroki, R., and Kikuchi, M. (1990) J. Biol. Chem. 265, 7570-7575). Here we report on the results of introducing an artificial disulfide bond in mutants with 2 cysteine residues substituting for Ala83 and Asp91. The mutant (C83/91) protein was not detected in the culture medium of the yeast, probably because of incorrect folding. Thereupon, 2 cysteine residues Cys77 and Cys95 were replaced with Ala in the mutant C83/91, because a native disulfide bond Cys77-Cys95 was found not necessary for correct folding in vivo (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). The resultant mutant (AC83/91) was secreted as two proteins (AC83/91-a and AC83/91-b) with different specific activities. Amino acid and peptide mapping analyses showed that two glutathiones appeared to be attached to the thiol groups of the cysteine residues introduced into AC83/91-a and that four disulfide bonds including an artificial disulfide bond existed in the AC83/91-b molecule. The presence of cysteine residues modified with glutathione may indicate that the non-native disulfide bond Cys83-Cys91 is not so easily formed as a native disulfide bond. These results suggest that the introduction of Cys83 and Cys91 may act to suppress the process of native disulfide bond formation through disulfide bond interchange in the folding of human lysozyme.     

Cys residues of the hepatitis B virus capsid protein are not essential for the assembly of viral core particles but can influence their stability.

In the spherical capsid of hepatitis B virus (HBV), intermolecular disulfide bonds cross-link the approximately 180 p21.5 capsid protein subunits into a stable lattice. In this study, we used mutant capsid proteins to investigate the role that disulfide bonds and the four p21.5 Cys residues (positions 48, 61, 107, and 185) play in capsid assembly and/or stabilization. p21.5 Cys residues were either replaced by Ala or removed (Cys-185) by carboxyl-terminal truncation, creating Cys-minus mutants which were expressed in Xenopus oocytes via microinjected synthetic mRNAs. Fractionation of radiolabeled oocyte extracts on 10 to 60% sucrose gradients revealed that Cys-minus core proteins resolved into the nonparticulate and capsid forms seen for wild-type p21.5. On 5 to 30% sucrose gradients, nonparticulate Cys-minus core proteins sedimented as dimers of approximately 40 kDa. We conclude that Cys residues and disulfides are not required for the assembly of either HBV capsids or the dimers that provide the precursors for capsid assembly. Since assembly presumably demands an appropriate p21.5 tertiary structure, it is unlikely that Cys residues are required for proper p21.5 folding. However, Cys residues stabilize isolated p21.5 structures, as evidenced by the marked reduction in stability of Cys-minus dimers and capsids (i) in nonreducing sodium dodecyl sulfate-polyacrylamide gel electrophoresis and (ii) upon protease digestion. We discuss these results in the context of the HBV life cycle and the role of Cys residues in other proteins.     

Isolation, renaturation, and formation of disulfide bonds of eukaryotic proteins expressed in Escherichia coli as inclusion bodies

Expression of recombinant proteins in Escherichia coli often results in the formation of insoluble inclusion bodies, In case of expression of eukaryotic proteins containing cysteine, which may form disulfide bonds in the native active protein, often nonnative inter- and intramolecular disulfide bonds exist in the inclusion bodies. Hence, several methods have been developed to isolate recombinant eukaryotic polypeptides from inclusion bodies, and to generate native disulfide bonds, to get active proteins. This article summarizes the different steps and methods of isolation and renaturation of eukaryotic proteins containing disulfide bonds, which have been expressed in E. coli as inclusion bodies, and shows which methods originally developed for studying the folding mechanism of naturally occurring proteins have been successfully adapted for reactivation of recombinant eukaryotic proteins. (c) 1993 John Wiley & Sons, Inc.     

Roles of the intramolecular disulfide bridge in MotX and MotY, the specific proteins for sodium-driven motors in Vibrio spp

The proteins PomA, PomB, MotX, and MotY are essential for the motor function of Na+-driven flagella in Vibrio spp. Both MotY and MotX have the two cysteine residues (one of which is in a conserved tetrapeptide [CQLV]) that are inferred to form an intramolecular disulfide bond. The cysteine mutants of MotY prevented the formation of an intramolecular disulfide bond, which is presumably important for protein stability. Disruption of the disulfide bridge in MotX by site-directed mutagenesis resulted in increased instability, which did not, however, affect the motility of the cells. These lines of evidence suggest that the intramolecular disulfide bonds are involved in the stability of both proteins, but only MotY requires the intramolecular bridge for proper function.     

The multisubunit structure of synaptophysin. Relationship between disulfide bonding and homo-oligomerization

Synaptophysin, a major membrane protein of synaptic vesicles, contains four transmembrane regions and two intravesicular loops. Synaptophysin monomers associate into homopolymers that have the potential to form channels in the synaptic vesicle membrane. Here we show that in native synaptophysin, homopolymers are linked by noncovalent forces. The molecule contains unstable intramolecular disulfide bonds that undergo disulfide exchange during solubilization, thereby covalently cross-linking neighboring synaptophysin molecules. The locations of the intramolecular disulfide bonds in synaptophysin were determined, revealing that each of the two intravesicular loops of synaptophysin is circularized by a single disulfide bond. Cross-linking of synaptophysin by disulfide bonds can be triggered in synaptic vesicles and in intact cells by a cycle of reduction and oxidation, suggesting that native synaptophysin is a homomultimer in situ. In addition, chemical cross-linking of native synaptophysin demonstrates that a low molecular weight protein is specifically associated with synaptophysin complexes and is lost upon reduction of the intramolecular disulfide bonds. These data suggest that native synaptophysin forms a noncovalent homomultimeric complex whose structure and interaction with other proteins are dependent on the integrity of its intramolecular disulfide bonds and phospholipid environment.