构建高产谷胱甘肽啤酒酵母基因工程菌提高啤酒抗老化能力的研究

根据同源重组的原理,将来源于啤酒酵母工业菌株G03的γ-谷氨酰半胱氨酸合成酶基因（GSH1）和筛选标记Kan取代质粒pRJ-5中18S rDNA内部约340bp的DNA片段,构建重组质粒pRKG。以pRKG为模版,PCR得到以18S rDNA为整合位点包含GSH1和Kan的基因片段18S rDNA::(Kan-GSH1)。用此片段转化啤酒酵母工业菌株G03,通过G418抗性筛选得到啤酒酵母工程菌。实验室小试表明,工程菌的谷胱甘肽含量比受体菌株提高16.6%,啤酒的抗老化能力得到了显著提高,而常规指标没有发生显著变化。连续传代5次后胞内GSH含量基本不变遗传稳定性良好。由于表达γ-谷氨酰半胱氨酸合成酶的基因来源于受体菌株自身,是通过自克隆技术改造工业啤酒酵母的一次有益的尝试。     

构建高产谷胱甘肽啤酒酵母基因工程菌提高啤酒抗老化能力的研究

根据同源重组的原理,将来源于啤酒酵母工业菌株G03的γ-谷氨酰半胱氨酸合成酶基因(GSH1)和筛选标记Kan取代质粒pRJ-5中18S rDNA内部约340bp的DNA片段,构建重组质粒pRKG。以pRKG为模版,PCR得到以18S rDNA为整合位点包含GSH1和Kan的基因片段18S rDNA::(Kan-GSH1)。用此片段转化啤酒酵母工业菌株G03,通过G418抗性筛选得到啤酒酵母工程菌。实验室小试表明,工程菌的谷胱甘肽含量比受体菌株提高16.6%,啤酒的抗老化能力得到了显著提高,而常规指标没有发生显著变化。连续传代5次后胞内GSH含量基本不变遗传稳定性良好。由于表达γ-谷氨酰半胱氨酸合成酶的基因来源于受体菌株自身,是通过自克隆技术改造工业啤酒酵母的一次有益的尝试。     

低双乙酰抗老化啤酒酵母工程菌的构建

用来源于啤酒酵母的γ-谷氨酰半胱氨酸合成酶基因（GSH1）和铜抗性基因（CUP1）取代质粒pLZ-2中α-乙酰乳酸合成酶基因（ILV2）内部约2.3kb的DNA片段,构建成重组质粒pICG。限制酶酶切质粒pICG后获得在基因GSH1和CUP1两端含有ILV2序列的6.0kb的DNA片段。用此片段转化啤酒酵母YSF31,得到铜抗性高的转化子。并通过PCR和α-乙酰乳酸合成酶（AHAS）活性测定筛选到酵母工程菌。小试实验结果表明酵母工程菌谷胱甘肽含量比受体高34％,而双乙酰含量是受体的75％。其他发酵指标并没有发生改变。中试实验表明酵母工程菌发酵周期缩短3d,而且成品啤酒的保鲜时间延长50％。由于DNA操作过程中没有外源基因介入,因此啤酒酵母工程菌为生物安全的自克隆菌株,具有重要的实际应用价值。     

黑暗链霉菌DNA同源重组系统的构建

以黑暗链霉菌Tt-49基因组为模板,利用PCR方法,扩增安普霉素生物合成关键基因aprF-G的上、下游序列,作为同源交换臂,并将红霉素抗性基因筛选标记及其启动子插入两交换臂之间,以温敏型质粒pKC1139为基础,构建用于阻断黑暗链霉菌Tt-49安普霉素生物合成的重组质粒pFD8.该质粒通过E.coil ET12567/pUZ8002去甲基化修饰后,经接舍转移进入黑暗链霉菌Tt-49,利用红霉素抗性筛选得到3株阳性转化子,分别命名为Tt-49 AG1、Tt-49 AG2和Tt-49 AG3.通过PCR鉴定,证明pFD8已插入黑暗链霉菌Tt-49基因组的目标位点.以亲株作对照,对3株工程菌进行红霉素抗性能力考察,发现3株工程菌的抗红霉素能力均高迭1 000 μg/mL以上.     

重组质粒二级结构对丙型肝炎病毒E2蛋白基因表达的影响

将含HCV/E2基因的重组质粒 pUC18/HCV -E2的BamHI酶切基因片段和NcoⅠ +HindⅢ酶切基因片段分别克隆到原核表达载体pRSETHis中 ,构建两株重组HCV/E2重组表达质粒 pRSET·C/E2和 pRSET·A/E2。在诱导表达中 pRSET·A/E2的外源基因获得了高效表达 ,而 pRSET·C/E2的外源基因完全未得到表达。     

脂肪储存小滴蛋白5 重组腺病毒的制备

目的:利用AdEasy腺病毒表达系统构建含有小鼠脂肪储存小滴蛋白5(LSDP5)基因的重组腺病毒。方法:从小鼠肝脏cDNA克隆出LSDP5基因全长,克隆至pMD18-T载体中,酶切测序。回收酶切产物,连接到腺病毒穿梭载体pShuttle-CMV,构建pShuttle-CMV-LSDP5重组质粒,经PmeI酶切线性化后转化至含有腺病毒骨架质粒pAdEasy-1的BJ5183中。筛选阳性克隆,提取重组质粒,PacI酶切线性化并转染AD293细胞进行包装,提取病毒DNA,鉴定重组病毒并检测病毒滴度。结果:LSDP5基因克隆经测序证实与Genebank公布一致,双酶切重组pMD18-T载体得到1400 bp左右的片段。重组穿梭载体经Kpn I和Sal I双酶切后得到预期片段。PacI酶切得到30 Kb大片段和4.5 Kb小片段。转染AD293细胞后收集病毒,经PCR鉴定,获得理想的目的片段。取病毒上清反复感染AD293细胞以扩增病毒,最后所得病毒滴度为2.5×109pfu/ml。结论:成功构建了携带脂肪储存小滴蛋白5基因的重组腺病毒载体,为进一步研究LSDP5基因功能奠定基础。     

脂肪储存小滴蛋白5重组腺病毒的制备

目的：利用AdEasy腺病毒表达系统构建含有小鼠脂肪储存小滴蛋白5（LSDP5）基因的重组腺病毒。方法：从小鼠肝脏cDNA克隆出LSDP5基因全长,克隆至pMD18-T载体中,酶切测序。回收酶切产物,连接到腺病毒穿梭载体pShuttle-CMV,构建pShuttle-CMV-LSDP5重组质粒,经PmeI酶切线性化后转化至含有腺病毒骨架质粒pAdEasy-1的BJ5183中。筛选阳性克隆,提取重组质粒,PacI酶切线性化并转染AD293细胞进行包装,提取病毒DNA,鉴定重组病毒并检测病毒滴度。结果：LSDP5基因克隆经测序证实与Genebank公布一致,双酶切重组pMD18-T载体得到1400 bp左右的片段。重组穿梭载体经Kpn I和Sal I双酶切后得到预期片段。PacI酶切得到30 Kb大片段和4.5 Kb小片段。转染AD293细胞后收集病毒,经PCR鉴定,获得理想的目的片段。取病毒上清反复感染AD293细胞以扩增病毒,最后所得病毒滴度为2.5×109pfu/ml。结论：成功构建了携带脂肪储存小滴蛋白5基因的重组腺病毒载体,为进一步研究LSDP5基因功能奠定基础。     

低乙醇脱氢酶Ⅱ活性的抗老化啤酒酵母工程菌的构建

采用自克隆技术,破坏啤酒酵母工业菌株YSF31的ADH2基因,在ADH2基因位点插入来源于YSF31的编码γ-谷氨酰半胱氨酸合成酶的GSH1基因和铜抗性筛选标记CUP1基因.通过铜抗性筛选转化子,经PCR和乙醇脱氢酶Ⅱ(ADH Ⅱ)活性测定验证,获得了1株啤酒酵母工程菌.10°P麦芽汁发酵实验显示,自克隆菌株的乙醇脱氢酶Ⅱ活性是受体菌的65%,谷胱甘肽含量比受体菌YSF31的高34%.其他发酵指标并没有发生明显改变.由于DNA操作过程中没有外源基因介入,因此啤酒酵母工程菌为生物安全的自克隆菌株,具有重要的应用价值.     

啤酒酵母ECM25/YJL201W基因敲除对啤酒风味稳定性的影响

以pUG6为模板, 设计含有与ECM25基因两侧序列同源的长引物, 构建了带有卡那抗性基因(kanMX)破坏盒, 转化啤酒酵母G-03, 获得一株G-03/a转化菌, 遗传稳定性良好, 测序结果证实ECM25基因敲除是成功的。有氧条件下11oC和28oC培养时转化菌G-03/a的胞外谷胱甘肽(GSH)分泌量在对数生长期分别比原菌高21.4%和14.7%。在锥形瓶中连续发酵4代后, 与原菌株相比, 转化菌G-03/a发酵液、成品酒中GSH含量分别提高32.1%和13.8%, 发酵液和成品啤酒SI系数分别提高7.7%和5.3%, 成品啤酒RSV值提高45.0%。EBC管发酵6 d后, 与原菌株相比, 转化菌G-03/a发酵液中GSH含量提高34.0%。转化菌G-03/a与G-03所酿制成品啤酒的常规指标没有显著差别。表明G-03/a是一株具有抗老化能力的优良啤酒酵母, 能够提高啤酒的风味稳定性。     

枯草芽孢杆菌α-乙酰乳酸脱羧酶基因的克隆及表达*

利用鸟枪法构建了供体菌的基因组文库,通过VP反应显色法进行筛选,从约7000个转化子中选出携带ALDC基因的重组质粒（pBG4～pBG5）．绘制了pBG4插入片段的限制酶图谱．Southern杂交证明该外源片段来源于供体菌。酶活性测定结果表明ALDC基因在大肠杆菌中获得了表达,为构建带有ALDC的啤酒酵母工程菌奠定了基础．     

Absence of fks1p in lager brewing yeast results in aberrant cell wall composition and improved beer flavor stability

The flavor stability during storage is very important to the freshness and shelf life of beer. However, beer fermented with a yeast strain which is prone to autolyze will significantly affect the flavor of product. In this study, the gene encoding β-1,3-glucan synthetase catalytic subunit (fks1) of the lager yeast was destroyed via self-clone strategy. β-1,3-glucan is the principle cell wall component, so fks1 disruption caused a decrease in β-1,3-glucan level and increase in chitin level in cell wall, resulting in the increased cell wall thickness. Comparing with wild-type strain, the mutant strain had 39.9 and 63.41 % less leakage of octanoic acid and decanoic acid which would significantly affect the flavor of beer during storage. Moreover, the results of European Brewery Convention tube fermentation test showed that the genetic manipulation to the industrial brewing yeast helped with the anti-staling ability, rather than affecting the fermentation ability. The thiobarbituric acid value reduced by 65.59 %, and the resistant staling value increased by 26.56 %. Moreover, the anti-staling index of the beer fermented with mutant strain increased by 2.64-fold than that from wild-type strain respectively. China has the most production and consumption of beer around the world, so the quality of beer has a significant impact on Chinese beer industry. The result of this study could help with the improvement of the quality of beer in China as well as around the world.     

Isolation and characterization of autolysis-defective mutants of Staphylococcus aureus created by Tn917-lacZ mutagenesis.

Two autolysis-defective mutants (Lyt-1 and Lyt-2) of Staphylococcus aureus have been isolated by transposon Tn917-lacZ mutagenesis. The mutants exhibited normal growth rate, cell division, cell size, and adaptive responses to environmental changes. No autolytic activities were detected in a crude autolytic enzyme preparation from the Lyt- mutants. The rate of autolysis of whole cells and cell walls in the mutants were negligible, but mutant cell wall preparations were degraded by crude enzyme preparations from the wild-type strain. Zymographic analyses of enzyme extracts from the mutants showed a single autolytic enzyme band, compared with more than 10 autolytic enzyme bands from the parent strain. Analyses of intracellular and exoprotein fractions gave results similar to those in experiments with total-cell extracts. Southern blot analysis indicated the insertion of a single copy of the transposon into the chromosome of Lyt mutants. Isogenic Lyt mutants constructed by phage phi 11 transduction showed similar phenotypes. Because both Lyt- mutants had Tn917-lacZ inserted in the appropriate orientation, it was possible to determine gene activity under various conditions by measuring beta-galactosidase activity. The gene activity was found to be induced by low pH, low temperature, and high sucrose and high sodium chloride concentrations. From these data, we propose that the mutation lies in either a master regulatory gene or a structural gene which is responsible for the synthesis or processing of a majority of the autolytic enzyme bands.     

Recombinant industrial brewing yeast strains with ADH2 interruption using self-cloning GSH1+CUP1 cassette

A self-cloning module for gene knock-out and knock-in in industrial brewing yeast strain was constructed that contains copper resistance and γ-glutamylcysteine synthetase gene cassette, flanked by alcohol dehydrogenase II gene ( ADH2 ) of Saccharomyces cerevisiae . The module was used to obtain recombined strains RY1 and RY2 by targeting the ADH2 locus of host Y1. RY1 and RY2 were genetically stable. PCR and enzyme activity analysis of RY1 and RY2 cells showed that one copy of ADH2 was deleted by GSH1 + CUP1 insertion, and an additional copy of wild type was still present. The fermentation ability of the recombinants was not changed after genetic modification, and a high level of glutathione (GSH) was secreted, resulting from GSH1 overexpression, which codes for γ-glutamylcysteine synthetase. A pilot-scale brewing test for RY1 and RY2 indicated that acetaldehyde content in fermenting liquor decreased by 21–22%, GSH content increased by 20–22% compared with the host, the antioxidizability of the recombinants was improved, and the sensorial evaluation was also better than that of the host. No heterologous DNA was harbored in the recombinants; therefore, they could be applied in the beer industry in terms of their biosafety.     

Yeast metallothionein function in metal ion detoxification

A genetic approach was taken to test the function of yeast metallothionein in metal ion detoxification. A yeast strain was constructed in which the metallothionein locus was deleted (cup1 delta). The cup1 delta strain was complemented with normal or mutant metallothionein genes under normal or constitutive regulatory control on high copy episomal plasmids. Metal resistance of the cup1 delta strain with and without the metallothionein-expressing vectors was analyzed. The normally regulated metallothionein gene conferred resistance only to copper (1000-fold); constitutively expressed metallothionein conferred resistance to both copper (500-fold) and cadmium (1000-fold), but not to mercury, zinc, silver, cobalt, nickel, gold, platinum, lanthanum, uranium, or tin. Two mutant versions of the metallothionein gene were constructed and tested for their ability to confer metal resistance in the cup1 delta background. The first had a deletion of a highly conserved amino acid sequence (Lys-Lys-Ser-Cys-Cys-Ser). The second was a hybrid gene consisting of the sequences coding for the first 20 amino acids of the yeast protein fused to the monkey metallothionein gene. Expression of these genes under the CUP1 promoter provided significant protection from copper, but none of the other metals tested. These results demonstrate that there is significant flexibility in the structural requirements for metallothionein to function in copper detoxification and that yeast metallothionein is also capable of detoxifying cadmium under conditions of constitutive expression.     

Isolation and characterization of a Clo DF13::Tn901 plasmid mutant with thermosensitive control of DNA replication.

After nitrosoguanidine mutagenesis, a mutant Escherichia coli strain harboring the Clo DF13::Tn901 plasmid pJN03 was isolated that is thermosensitive (Ts) for growth at 43 degrees C. The mutation responsible for this thermosensitive phenotype resides on the pJN03 plasmid genome. Cells harboring the pJN03 cop-1(Ts) plasmid mutant showed a large increase in plasmid copy number at 43 degrees C accompanied by an increase in the synthesis of plasmid-specified gene products like cloacin DF13 and beta-lactamase. The pJN03 cop-1(Ts) mutant showed uncontrolled plasmid DNA replication at the nonpermissive temperature. Analysis of plasmid deletions showed that the mutation is located in the Clo DF13 map interval from 0 to 12% or 29 to 45%. This implies that native cloacin DF13 and the Clo DF13-specified polypeptides B, C, D, E, and G are not involved in the pleiotropic phenotype of the plasmid mutant pJN03 cop-1(Ts).     

Extracellular tyrosinase from Streptomyces sp. KY-453: purification and some enzymatic properties

A strain of Streptomyces isolated from soil was found to produce a large amount of tyrosinase (monophenol, dihydroxy-L-phenylalanine: oxygen oxidoreductase: EC 1.14.18.1) extracellularly. The enzyme was purified from the culture filtrate about 550-fold by a series of column chromatographies on Duolite A-2 and CM-cellulose and gel filtration on Sephadex G-100. The purified enzyme appeared homogeneous as judged by disc gel electrophoresis. The enzyme catalyzed the hydroxylation of monophenols and the oxidation of diphenols and was most active at pH 6.8 with dihydroxy-L-phenylalanine (L-DOPA) as the substrate. It was inhibited by kojic acid, diethyldithiocarbamate, and inhibitors obtained from micro-organisms. The isoelectric point of the enzyme was 9.9, and the molecular weight was estimated to be 36,000 by gel filtration on Sephadex G-100 and 29,000 by sodium dodecyl sulfate (SDS) gel electrophoresis, which suggests that the enzyme is a monomer. Metal analysis by atomic absorption spectroscopy indicated that the enzyme contains nearly 1 gram atom of copper per mol.