Degradation of poly (3-hydroxybutyrate) and its copolymer poly (3-hydroxybutyrate-co-3-hydroxyvalerate) by a marine Streptomyces sp. SNG9

A marine Streptomyces sp. SNG9 was characterized by its ability to utilize poly(3-hydroxybutyrate) (PHB) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate P (3HB-co-HV). The bacterium grew efficiently in a simple mineral liquid medium enriched with 0.1% poly(3-hydroxybutyrate) powder as the sole carbon source. Cells excreted PHB depolymerase and degraded the polymer particles to complete clarity in 4 days. The degradation activity was detectable by the formation of a clear zone around the colony (petri plates) or a clear depth under the colony (test tubes). The expression of PHB depolymerase was repressed by the presence of simple soluble carbon sources. Bacterial degradation of the naturally occurring sheets of poly(3-hydroxybutyrate) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was observed by scanning electron microscopy (SEM). Morphological alterations of the polymers sheets were evidence for bacterial hydrolysis.     

Structure and enzymatic degradation of poly(3-hydroxybutyrate) copolymer single crystals with an extracellular PHB depolymerase from Alcaligenes faecalis T1.

Lamellar single crystals of four random copolymers of (R)-3-hydroxybutyrate with different hydroxyalkanoates: poly(3-hydroxybutyrate-co-8 mol%-3-hydroxyvalerate) (P(3HB-co-8%-3HV)), poly(3-hydroxybutyrate-co-10 mol%-4-hydroxybutyrate) (P(3HB-co-10%-4HB)), poly(3-hydroxybutyrate-co-8 mol%-3-hydroxyhexanoate) (P(3HB-co-8%-3HH)) and poly(3-hydroxybutyrate-co-10 mol%-6-hydroxyhexanoate) (P(3HB-co-10%-6HH)), were grown from dilute solutions of chloroform and ethanol. All single crystals have lath-shaped morphology and the second monomer units seem to be excluded from the P(3HB) crystal, on the basis of the electron diffraction diagrams. The enzymatic degradation of P(3HB-co-8%-3HH) and P(3HB-co-10%-6HH) single crystals was investigated with an extracellular PHB depolymerase from Alcaligenes faecalis T1. Adsorption of an extracellular PHB depolymerase, examined using an immuno-gold labelling technique, demonstrated a homogeneous distribution of enzyme molecules with a low concentration on the crystal surfaces. Enzymatic degradation of single crystals progressed from the edges and ends of crystals to yield narrow cracks along their long axes and the small crystal fragments. Lamellar thicknesses of single crystals and molecular weights of copolymer chains remained unchanged during the enzymatic hydrolysis. The above results support the hypothesis that the hydrophobic adsorption of the enzyme contributes to increase the mobility of molecular chains of single crystals and generate the disordered chain-packing regions. The active-site of PHB depolymerase takes place preferentially at the disordered chain-packing regions of crystal edges and ends with endo-exo enzymatic hydrolysis behaviour, termed processive degradation.     

Degradation of polyesters by a novel marine Nocardiopsis aegyptia sp. nov.: application of Plackett-Burman experimental design for the improvement of PHB depolymerase activity

This is the first report on the degradation of poly(3-hydroxybutyrate) (PHB), and its copolymers poly(3-hydroxyvalerate) P(3HB-co-10-20% HV) by Nocardiopsis aegyptia, a new species isolated from marine seashore sediments. The strain excreted an extracellular PHB depolymerase and grew efficiently on PHB or its copolymers as the sole carbon sources. The degradation activity was detectable by the formation of a transparent clearing zone around the colony on an agar Petri plate after 25 days, or a clearing depth under the colony in test tubes within 3 weeks. The previous techniques proved that the bacterium was able to assimilate the monomeric components of the shorter alkyl groups of the polymers. Nocardiopsis aegyptia hydrolyzed copolymers 10-20% PHBV more rapidly than the homopolymer PHB. The bacterial degradation of the naturally occurring sheets of poly(3-hydroxybutyrate), and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was observed by scanning electron microscopy (SEM). The samples were degraded at the surface and proceeded to the inner part of the materials. Clear morphological alterations of the polymers were noticed, indicating the degradative capability of the bacterium. Plackett-Burman statistical experimental design has been employed to optimize culture conditions for maximal enzyme activity. The main factors that had significant positive effects on PHB depolymerase activity of Nocardiopsis aegyptia were sodium gluconate, volume of medium/flask and age of inoculum. On the other hand, MgSO4.7H2O, KH2PO4, K2HPO4 and NH4NO3 exhibited negative effects. Under optimized culture conditions, the highest activity (0.664 U/mg protein) was achieved in a medium predicted to be near optimum containing (in g/L): PHB, 0.5; C6H11O7Na, 7.5; MgSO4.7H2O, 0.35; K2HPO4, 0.35; NH4NO3, 0.5; KH2PO4, 0.35; malt extract, 0.5 and prepared with 50% seawater. The medium was inoculated with 1% (v/v) spore suspension of 7 days old culture. Complete clarity of the medium was achieved after 3 days at 30 degrees C.     

Isolation of poly(3-hydroxybutyrate) (PHB)-degrading microorganisms and characterization of PHB-depolymerase from Arthrobacter sp. strain W6.

Microbial degraders of poly(3-hydroxybutyrate) (PHB) were isolated from soil. Arthrobacter sp. strain W6 used not only PHB as a carbon source, but also PHAs such as poly(3-hydroxybutyrate-co-[5%]3-hydroxyvalerate), poly(3-hydroxybutyrate-co-[14%]3-hydroxyvalerate), and poly(3-hydroxybutyrate-co-[22%]3-hydroxyvalerate). PHB-depolymerase was purified to homogeneity from the culture broth of Arthrobacter sp. strain W6 by a procedure involving DEAE- and butyl-Toyopearl column chromatographies. The Mr of the enzyme was estimated to be about 47,000 by SDS-polyacrylamide gel electrophoresis. The enzyme was most active at pH 8.5 and 50 degrees C, and was inhibited by phenylmethylsulfonyl fluoride, Hg2+, Ag+, and Pb2+.     

Intracellular degradation of poly(3-hydroxybutyrate) granules of Zoogloea ramigera I-16-M

Abstract Intracellular degradation of poly(3-hydroxybutyrate) (PHB) in bacteria is not yet clear. The properties of the autodigestion of native PHB granules from Zooglea ramigera I-16-M were examined. The release of d (−)-3-hydroxybutyrate was observed only at pH values higher than about 8.5 and at relatively high ionic strength (optimal concentration 200 mM NaCl). Triton X-100 and diisopropylfluorophosphate inhibited this reaction. Addition of the supernatant fraction of Z. ramigera did not increase the release of d (−)-3-hydroxybutyrate from the native PHB granules. On the other hand, using the protease-treated PHB granules from Alcaligenes eutrophus as a substrate, PHB depolymerase activity was detected in the supernatant fraction of Z. ramigera cells. The soluble PHB depolymerase showed similar properties to the enzyme in the PHB granules. Since PHB depolymerase activity was found in fractions containing d (−)-3-hydroxybutyrate oligomer hydrolase activity, which were separated by DEAE-Toyopearl or by Sephacryl S-100, it is possible that the intracellular PHB depolymerase is identical to the oligomer hydrolase which has been purified already.     

The biodegradation of poly-3-hydroxyalkanoates,PHAs, with long alkyl substitutents byPseudomonas maculicola

Utilizing a quantitative clear zone technique, the activity of an extracellular depolymerase system fromPseudomonas maculicola was investigated. Polymer degradation was influenced by the amount and availability of secondary carbon sources, with a simultaneous utilization of both sources. The initial carbon source in the liquid preculture also affected the eventual colony growth and polymer degradation. The enzyme solution was determined to readily degrade poly-3-hydroxyalkanoates (PHAs) with relatively long alkyl substituents at the 3 position: poly-3-hydroxyoctanoate (PHO), poly-3-hydroxynonanoate (PHN), and their copolymers (P[HO-co-HN]) and poly-3-hydroxyundecanoate (PHU). However, the system was unable to degrade either PHAs with shorter alkyl groups, including poly-3-hydroxybutyrate (PHB) and the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-co-HV]) or PHAs with unusual substituents such as poly(3-hydroxy-5-phenylvaleric acid) (PHPV). It is proposed that degradation of these more bulky side chain polymers was prevented by the inability of the bacteria to assimilate their monomeric components, which inhibited the successful utilization of secondary carbon sources and thus inhibited colony growth.     

Anaerobic degradation of poly-3-hydroxybutyrate and poly-3-hydroxybutyrate-co-3-hydroxyvalerate

The anaerobic degradation of the polyesterspoly-3-hydroxybutyrate (PHB) andpoly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) wasinvestigated with special regard to intermediateproducts, kinetics, and yields. During the degradationof PHBV acetate, propionate, n-butyrate, andn-valerate were detected. Additionally,3-hydroxybutyrate and 3-hydroxyvalerate and fourdimeric esters of these two molecules were identifiedby GC-MS measurements. Three different test systemsfor the anaerobic degradation of polyesters werestudied. It was not possible to get reproducibleresults by means of the Anaerobic Sturm-test, a simplesystem based on carbon dioxide measurement. Secondly,a system based on the GC measurement of accumulatedorganic acids was investigated. A degradation of 90%in two days was calculated by a carbon balance. Bestresults were reached with the third test system basedon the measurement of methane with a gas meter. Adegradation of 99% was observed within 30 days.     

Purification and characterization of an extracellular poly(3-hydroxybutyrate-co-3-hydroxyvalerate) depolymerase from Acidovorax sp. HB01

The poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)-degrading strain Acidovorax sp. HB01 was isolated from an activated sludge sample. A novel PHBV depolymerase with a molecular weight of 43.4 kDa was purified to homogeneity from the culture supernatant of the HB01 strain. The optimum pH and temperature of the PHBV depolymerase were 7.0 and 50 °C, respectively. The PHBV depolymerase can also degrade polyhydroxybutyrate, poly (3-hydroxybutyrate-co-4-hydroxybutyrate), and poly(caprolactone); however, the PHBV degradation activity of the depolymerase is higher than its activity against the other polymers. Effect of metal ions and various inhibitors on the PHBV depolymerase activity was examined. The addition of Na(+), K(+), and Ca(2+) markedly increased the hydrolysis rate, whereas the enzyme activity was inhibited by Zn(2+), Mg(2+), Mn(2+), and particularly by Cu(2+) and Fe(2+). Ethylenediaminetetraacetic acid was found to have a significant inhibitory effect. The main degradation product of depolymerase was identified as the 3-hydroxybutyric acid monomer and 3-hydroxyvaleric acid monomers via mass spectrometry.     

Biodegradation kinetics of poly(3-hydroxybutyrate)-based biopolymer systems

The aim of this study was to evaluate and to compare the long-term kinetics curves of biodegradation of poly(3-hydroxybutyrate) (PHB), its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and a PHB/polylactic acid composite. The total weight loss and the change of average viscosity molecular weight were used as the parameters reflecting the biodegradation degree. The rate of biodegradation was analyzed in vitro in the presence of lipase and in vivo after film implantation in animal tissues. The morphology of the PHB film surface was studied by the atomic force microscopy technique. It was shown that PHB biodegradation involves both polymer hydrolysis and its enzymatic biodegradation. The results obtained in this study can be used for the development of various PHB-based medical devices.     

Thermal degradation of poly(3-hydroxyalkanoates): preparation of well-defined oligomers

The thermal degradation of the biodegradable bacterial polyesters poly(3-hydroxybutyrate), PHB, poly(3-hydroxyvalerate), PHV, and poly(3-hydroxybutyrate-co-3-hydroxyvalerate), 0-21 mol % of hydroxyvalerate, was studied. At moderately low temperatures (170-200 degrees C), the main product is a well-defined oligomer, especially a 500-10,000 g/mol macromolecule, which contains one unsaturated end group, predominantly a trans-alkenyl end group, as well as a carboxylic end group. The process was studied regarding the effect of the copolymer composition and reaction time at 190 degrees C. During the first few hours of reaction, the thermal degradation of PHB and PHV followed a kinetic model of random scission, but eventually auto-acceleration of the pyrolysis was detected, probably due to the influence of the crotonate end groups of the oligomers formed. Ten-time scale-up experiments on a Brabender instrument were successfully undertaken.     

Extracellular poly(hydroxyalkanoate) depolymerases and their inhibitor from Pseudomonas lemoignei.

Enzymatic degradation processes of microbial copolyesters, poly(3-hydroxybutyrate-co-3-hydroxyvalerate): P(3HB-co-3HV) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate): P(3HB-co-4HB), were studied by the weight loss (erosion) of copolyester films. These studies employed three extracellular depolymerases which degrade poly(3-hydroxybutyrate): P(3HB). Two enzymes were purified from the culture supernatant of Pseudomonas lemoignei and one from Alcaligenes faecalis T1. The rate of enzymatic degradation of microbial copolyester films with various compositions showed an almost similar tendency to three different P(3HB) depolymerases, and decreased in the following order: P(3HB-co-4HB) greater than P(3HB) greater than P(3HB-co-3HV). An inhibitory protein of P(3HB) depolymerases in the succinate culture medium of P. lemoignei was isolated and characterized. The molecular weight of P(3HB) depolymerase inhibitor was 35,000 as determined by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulphate. This inhibitor of a single polypeptide chain may reversibly bind the serine residues at the active site of P(3HB) depolymerase. This inhibitory protein was not induced in the culture medium when P. lemoignei was grown on P(3HB) as the sole carbon source.     

Intracellular degradation of poly(3-hydroxybutyrate) granules of Zoogloea ramigera I-16-M.

Intracellular degradation of poly(3-hydroxybutyrate) (PHB) in bacteria is not yet clear. The properties of the autodigestion of native PHB granules from Zoogloea ramigera I-16-M were examined. The release of D(-)-3-hydroxybutyrate was observed only at pH values higher than about 8.5 and at relatively high ionic strength (optimal concentration 200 mM NaCl). Triton X-100 and diisopropylfluorophosphate inhibited this reaction. Addition of the supernatant fraction of Z. ramigera did not increase the release of D(-)-3-hydroxybutyrate from the native PHB granules. On the other hand, using the protease-treated PHB granules from Alcaligenes eutrophus as a substrate, PHB depolymerase activity was detected in the supernatant fraction of Z. ramigera cells. The soluble PHB depolymerase showed similar properties to the enzyme in the PHB granules. Since PHB depolymerase activity was found in fractions containing D(-)-3-hydroxybutyrate oligomer hydrolase activity, which were separated by DEAE-Toyopearl or by Sephacryl S-100, it is possible that the intracellular PHB depolymerase is identical to the oligomer hydrolase which has been purified already.     

Isolation of a Gram-positive poly(3-hydroxybutyrate) (PHB)-degrading bacterium from compost, and cloning and characterization of a gene encoding PHB depolymerase of Bacillus megaterium N-18-25-9

A Gram-positive poly(3-hydroxybutyrate) (PHB)-degrading bacterial strain was isolated from compost. This organism, identified as Bacillus megaterium N-18-25-9, produced a clearing zone on opaque NB-PHB agar, indicating the presence of extracellular PHB depolymerase. A PHB depolymerase gene, PhaZ(Bm), of B. megaterium N-18-25-9 was cloned and sequenced, and the recombinant gene product was purified from Escherichia coli. The N-terminal half region of PhaZ(Bm) shared significant homologies with a catalytic domain of other PHB depolymerases. Although the C-terminal half region of PhaZ(Bm) showed no significant similarity with those of other PHB depolymerases, that region was necessary for the PHB depolymerase activity. Therefore, this enzyme's domain structure is unique among extracellular PHB depolymerase domain structures. The addition of PHB to the medium led to a sixfold increase in PhaZ(Bm) mRNA, while the presence of glucose repressed PhaZ(Bm) expression. The maximum activity was observed at pH 9.0 at 65 degrees C.     

Mobilization of poly(3-hydroxybutyrate) in Ralstonia eutropha

Ralstonia eutropha H16 degraded (mobilized) previously accumulated poly(3-hydroxybutyrate) (PHB) in the absence of an exogenous carbon source and used the degradation products for growth and survival. Isolated native PHB granules of mobilized R. eutropha cells released 3-hydroxybutyrate (3HB) at a threefold higher rate than did control granules of nonmobilized bacteria. No 3HB was released by native PHB granules of recombinant Escherichia coli expressing the PHB biosynthetic genes. Native PHB granules isolated from chromosomal knockout mutants of an intracellular PHB (i-PHB) depolymerase gene of R. eutropha H16 and HF210 showed a reduced but not completely eliminated activity of 3HB release and indicated the presence of i-PHB depolymerase isoenzymes.     

Degradation of poly(3-hydroxybutyrate) by soil streptomycetes

The ability of 64 soil streptomycetes to degrade poly(3-hydroxybutyrate) [P(3HB)] was evaluated on Pridham and Lyons mineral salts agar medium overlayered with the same medium containing 0.2% P(3HB). The streptomycete isolates were grown on this overlayered medium and the degradation was detected by the formation of clear zone surrounding the growth. Four potent degrader isolates identified as species of Streptomyces were selected. Degradation of P(3HB) by these isolates was studied for a period of 8 days. The rate of degradation increased with increase in concentration of P(3HB) in the medium while it decreased with the supplementation of readily utili- zable carbon sources like glucose, fructose and sucrose. All four isolates also degraded the copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate [P(3HB–co–3HV)] in solid medium but to a lesser extent. However, the isolates were equally efficient in degrading P(3HB) in liquid medium.     

An extracellular poly (3-hydroxybutyrate) depolymerase from Penicillium sp. DS9713a-01

Summary Penicillium sp. DS9713a-01 was obtained by ultraviolet (u.v.) light mutagenesis from the Penicillium sp. DS9713a which can degrade poly (3-hydroxybutyrate) (PHB). The enzymatic activity of DS9713a-01 was 97% higher than that of the wild-type strain. The DS9713a-01 mutant could completely degrade PHB films in 5 days; however, the wild-type strain achieved only 61% at the same time. The extracellular PHB depolymerase was purified from the culture medium containing PHB as the sole carbon source by filtration, ammonium sulfate precipitation and chromatography on Sepharose CL-6B. The molecular weight of the PHB depolymerase was about 15.1kDa determined by SDS-polyacrylamide gel electrophoresis. The optimum activity of the PHB depolymerase was observed at pH 8.6 and 50 °C. The enzyme was stable at temperatures below 37 °C and in the pH range from 8.0 to 9.2. The activity of PHB depolymerase could be activated or inhibited by some metal ions. The apparent K _m value was 0.164 mg ml⁻¹. Mass spectrometric analysis of the water-soluble products after enzymatic degradation revealed that the primary product was the monomer, 3-hydroxybutyric acid.     

Methanogenic Degradation of Poly(3-Hydroxyalkanoates)

Poly(3-hydroxybutyrate) and the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) were fermented to methane and carbon dioxide within 16 days by an anaerobic sewage sludge consortium. The cultures adapted quickly to metabolize these polymeric compounds, and between 83 and 96% of the substrate carbon was transformed to methane and carbon dioxide.     

Accumulation of a poly(hydroxyalkanoate) copolymer containing primarily 3-hydroxyvalerate from simple carbohydrate substrates by Rhodococcus sp. NCIMB 40126

A number of taxonomically-related bacteria have been identified which accumulate poly(hydroxyalkanoate) (PHA) copolymers containing primarily 3-hydroxyvalerate (3HV) monomer units from a range of unrelated single carbon sources. One of these, Rhodococcus sp. NCIMB 40126, was further investigated and shown to produce a copolymer containing 75 mol% 3HV and 25 mol% 3-hydroxybutyrate (3HB) from glucose as sole carbon source. Polyesters containing both 3HV and 3HB monomer units, together with 4-hydroxybutyrate (4HB), 5-hydroxyvalerate (5HV) or 3-hydroxyhexanoate (3HHx), were also produced by this organism from certain accumulation substrates. With valeric acid as substrate, almost pure (99 mol% 3HV) poly(3-hydroxyvalerate) was produced. N.m.r. analysis confirmed the composition of these polyesters. The thermal properties and molecular weight of the copolymer produced from glucose were comparable to those of PHB produced by Alcaligenes eutrophus.     

聚羟基烷酸酯 (PHA) 改性研究进展

本文简述了生物制造聚羟基烷酸酯(PHA),包括聚3-羟基丁酸酯(PHB)、聚(3-羟基丁酸酯-3-羟基戊酸酯)(PHBV)、聚(3-羟基丁酸酯-4-羟基丁酸酯)(P3/4HB)、聚(3-羟基丁酸酯-3-羟基己酸酯)(PHBH)的产业化现状,综述了针对PHA材料热稳定性差、加工窗口较窄等缺点而进行的一些改性研究。选用适当方法对PHA进行改性,可使其性能得到优化,应用领域得到拓展。     

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in soils.

The microbial degradation of tensile test pieces made of poly(3-hydroxybutyrate) [P(3HB)] or a copolymer of 90% 3-hydroxybutyric acid and 10% 3-hydroxyvaleric acid was studied in soils incubated at a constant temperature of 15, 28, or 40 degrees C for up to 200 days. In addition, hydrolytic degradation in sterile buffer at temperatures ranging from 4 to 55 degrees C was monitored for 98 days. Degradation was measured through loss of weight (surface erosion), molecular weight, and mechanical strength. While no weight loss was recorded in sterile buffer, samples incubated in soils were degraded at an erosion rate of 0.03 to 0.64% weight loss per day, depending on the polymer, the soil, and the incubation temperature. The erosion rate was enhanced by incubation at higher temperatures, and in most cases the copolymer lost weight at a higher rate than the homopolymer. The molecular weights of samples incubated at 40 degrees C in soils and those incubated at 40 degrees C in sterile buffer decreased at similar rates, while the molecular weights of samples incubated at lower temperatures remained almost unaffected, indicating that molecular weight decrease is due to simple hydrolysis and not to the action of biodegrading microorganisms. The degradation resulted in loss of mechanical properties. From the samples used in the biodegradation studies, 295 dominant microbial strains capable of degrading P (3HB) and the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer in vitro were isolated and identified.(ABSTRACT TRUNCATED AT 250 WORDS)