Synthesis and structural characterization of dimolybdenum(IV) and molybdenum(VI) complexes with trisbenzenethiolatophosphine ligands

The synthesis and crystal structures of two high valent molybdenum complexes containing trisbenzenethiolatophosphine ligands, [Mo₂(PS3)₂(PS3H)] (1) and [Mo(PS3″)₂] (2), where PS3 = [P(C₆H₄-2-S)₃]³⁻, PS3H = [P(C₆H₄-2-S)₂(C₆H₄-2-SH)]²⁻, and PS3″ = [P(C₆H₃-3-Me₃Si-2-S)₃]³⁻, are described. Compound 1 is a dimeric Mo(IV) species containing three PS3 ligands with an uncoordinated thiol group. An intramolecular hydrogen bonding S-H?S was found in the structure. Two molybdenum ions are bridged by three thiolates. The geometry can be described as two pentagonal bipyramids sharing a triangle face formed by three bridging S atoms. Compound 2 is a Mo(VI) species binding with two tetradentate PS3″ ligands. The eight-coordinate molybdenum center adopts a dodecahedral geometry.     

Adsorption of Cr(VI) and As(V) ions by modified magnetic chitosan chelating resin

Cross-linked magnetic chitosan anthranilic acid glutaraldehyde Schiff's base (CAGS) was prepared for adsorption of both As(V) and Cr(VI) ions and their determination by ICP-OES. Prepared cross-linked magnetic CAGS was investigated by means of SEM, FTIR, wide angle X-ray diffraction (WAXRD) and TGA analysis. The adsorption properties of cross-linked magnetic CAGS resin toward both As(V) and Cr(VI) were evaluated. Various factors affecting the uptake behavior such as pH, temperature, contact time, initial concentration of metal ions, effect of other ions and desorption were studied. The equilibrium was achieved after about 110 min and 120 min for As(V) and Cr(VI), respectively at pH = 2. The adsorption kinetics followed the mechanism of the pseudo-second order equation for all systems studied, evidencing chemical sorption as the rate-limiting step of adsorption mechanism and not involving a mass transfer in solution. The equilibrium data were analyzed using the Langmuir, Freundlich, and Tempkin isotherm models. The best interpretation for the equilibrium data was given by Langmuir isotherm, and the maximum adsorption capacities were 58.48 and 62.42 mg/g for both Cr(VI) and As(V), respectively. Cross-linked magnetic CAGS displayed higher adsorption capacity for Cr(VI). The adsorption capacity of the metal ions increased with increasing temperature under optimum conditions in case of Cr(VI), but decreased in case of As(V). The metal ion-loaded cross-linked magnetic CAGS were regenerated with an efficiency of greater than 88% using 0.2 M sodium hydroxide (NaOH).     

Study of the biosorption of different heavy metal ions onto Kraft lignin

The ability of Kraft lignin, a waste product of paper production, for removing copper, zinc, cadmium and chromium ions from water was investigated. The studies were conducted by a batch method to determine equilibrium parameters. The adsorbed heavy metal ions followed the order: Cr(VI) ? Cd(II) > Cu(II) > Zn(II). The influence of other ions such as Ni(II), Cd(II) and Pb(II), on Cu(II) adsorption by Kraft lignin was evaluated. Obtained results support the idea that adsorption behaviour of heavy metal ions have to be perceived from the aspect of possible influence of interfering ion species.     

Tailoring size and structural distortion of Fe3O4 nanoparticles for the purification of contaminated water

Fe₃O₄ magnetic nanoparticles with different particle sizes were synthesized using two methods, i.e., a co-precipitation process and a polyol process, respectively. The atomic pair distribution analyses from the high-energy X-ray scattering data and TEM observations show that the two kinds of nanoparticles have different sizes and structural distortions. An average particle size of 6–8 nm with a narrow size distribution was observed for the nanoparticles prepared with the co-precipitation method. Magnetic measurements show that those particles are in ferromagnetic state with a saturation magnetization of 74.3 emu g⁻¹. For the particles synthesized with the polyol process, a mean diameter of 18–35 nm was observed with a saturation magnetization of 78.2 emu g⁻¹. Although both kinds of nanoparticles are well crystallized, an obviously higher structural distortion is evidenced for the co-precipitation processed nanoparticles. The synthesized Fe₃O₄ particles with different mean particle size were used for treating the wastewater contaminated with the metal ions, such as Ni(II), Cu(II), Cd(II) and Cr(VI). It is found that the adsorption capacity of Fe₃O₄ particles increased with decreasing the particle size or increasing the surface area. While the particle size was decreased to 8 nm, the Fe₃O₄ particles can absorb almost all of the above-mentioned metal ions in the contaminated water with the adsorption capacity of 34.93 mg/g, which is ∼7 times higher than that using the coarse particles. We attribute the extremely high adsorption capacity to the highly-distorted surface.     

Investigation of Cr(VI) adsorption onto chemically treated Helianthus annuus: Optimization using Response Surface Methodology

In the present study, chemically treated Helianthus annuus flowers (SHC) were used to optimize the removal efficiency for Cr(VI) by applying Response Surface Methodological approach. The surface structure of SHC was analyzed by Scanning Electron Microscopy (SEM) coupled with Energy Dispersive X-ray Analysis (EDX). Batch mode experiments were also carried out to assess the adsorption equilibrium in aqueous solution. The adsorption capacity (q_e) was found to be 7.2 mg/g. The effect of three parameters, that is pH of the solution (2.0-7.0), initial concentration (10-70 mg/L) and adsorbent dose (0.05-0.5 g/100 mL) was studied for the removal of Cr(VI) by SHC. Box-Behnken model was used as an experimental design. The optimum pH, adsorbent dose and initial Cr(VI) concentration were found to be 2.0, 5.0 g/L and 40 mg/L, respectively. Under these conditions, removal efficiency of Cr(VI) was found to be 90.8%.     

A Review of Molybdenum Adsorption in Soils/Bed Sediments: Speciation,Mechanism, and Model Applications

Mo is an essential trace element for both plants and animals in low concentrations (<5 ppm). However, provoked by uncontrolled industrial waste releases in freshwater or seawater, it is plausible that excessive availability of soluble Mo(VI) would be potentially toxic. In the environment, soluble Mo(VI) is mainly present in anionic forms of molybdate (MoO₄ ^2?) and/or tetrathiomolybdate (MoS₄ ^2?). The fate and transport of soluble Mo(VI) anions in surface and subsurface aquatic environments is typically controlled by adsorption in acidic soils and sediment. As such, the ability of soils/bed sediments to retain Mo(VI) is a key to determine its general mobility in the aquatic environment. This article reviews the sources and distribution of Mo speciation in solution and Mo(VI) anions adsorption mechanisms in soils and bed sediments, and evaluates the surface adsorption complexation models at the solid-water interface to estimate Mo(VI) anions adsorption in these chemical systems. Mo(VI) anions adsorption mechanisms included MoO₄ ^2? and MoS₄ ^2? adsorption by several prevailing adsorbent contents (including clay, Fe, Al oxides, iron sulfide, manganese oxides, and organic matter) of soils and bed sediments, and the influence of the competitive adsorption of other anions (e.g., sulfate, selenate, phosphate, arsenate, silicate, or tungstate). Models to estimate Mo(VI) anions adsorption include the triple layer model (TLM), the diffuse layer model (DLM), the constant capacitance surface complexation model (CCM), and charge distribution multisite complexation model (CD-MUSIC).     

Magnetic chitosan composite particles: Evaluation of thorium and uranyl ion adsorption from aqueous solutions

Magnetic chitosan composite particles with 40 μm average size and 24 emu/g saturation magnetization obtained by an in situ procedure were evaluated as a new low-cost adsorbent for radioactive wastewater decontamination. Sorbent characterization by SEM, EDX, FTIR and magnetization measurements proved that the target ions were bound and their surface distribution was uniform. The 18 emu/g magnetization of the metal loaded particles was high enough to ensure their easy magnetic field separation and recovery. The parameters influencing the sorption process were optimized with respect to sorbent mass, target ion concentration and contact time. The material under study had superior adsorption capacity both for uranyl (666.67 mg/g) and thorium (312.50 mg/g) ions when compared to other low-cost adsorbents reported in literature. The adsorption process is spontaneous and endothermic. The material may be regenerated and re-used.     

Reaction of Mo(CO)4(NCCH3)2 and 7-aza-2-Tosylnorbornadiene

Reaction of Mo(CO)₄(NCCH₃)₂ and 7-aza-2-tosylnorbornadiene (7-azaNBD) yielded five air-stable Mo complexes. One is Mo(CO)₄(η⁴-7-azaNBD), in which the molybdenum atom is chelated by the two π-bonds of 7-azaNBD. The other four are isomers of Mo(CO)₂(η²-7-azaNBD)₂, in which the molybdenum atoms are chelated by the nitrogen atom and one of the two double bonds of 7-azaNBD. In one pair of the isomers, the metal binds to C(2)C(3) of both 7-azaNBD ligands; whereas in the other pair of isomers the metal binds to C(2)C(3) of one 7-azaNBD ligand and C(5)C(6) of another ligand. All structures were fully characterized by NMR spectra. A single crystal of compound 4 was analyzed by X-ray diffraction analysis, which was found to be monoclinic with a = 8.4199, b = 23.984, c = 16.395 Å, and β = 99.99°.     

Synthesis and characterization of heteroscorpionate dioxo-tungsten(VI) complexes

Twelve new dioxo W(VI) complexes of a family of heteroscorpionate ligands of the type [(L)WO₂Y], where L = N₂X ligand and Y = Cl or OR, have been synthesized and characterized. With the more sterically bulky ligands we show that these complexes exist as isolable cis and trans isomers and compare the rate of such isomerization with their corresponding dioxo Mo(VI) analogs.     

Structural characterization and reactivity of gamma-octamolybdate functionalized by proline

The reaction of molybdate and dl-proline at pH 3.4 results in the formation of a Na₄[Mo₈O₂₆(proO)₂] · 22H₂O complex (pro = proline) in which two proline ligands are attached to molybdenum(VI) ions via monodentate coordination of the carboxylate groups. The structure of the complex was determined by single crystal X-ray diffraction and by combination of ¹H, ¹³C and ⁹⁵Mo NMR spectroscopy techniques in solution. The structure of the complex is strongly dependant on the pH. At native pH 3.4 the octamolybdate-type structure seems to be present in solution, but the increase of pH to 5.8 resulted in a rearrangement of the structure to a heptamolybdate-type structure. At physiological pH, the polyoxometalate framework was completely dissociated into the monomeric unit. The reactivity of the Na₄[Mo₈O₂₆(proO)₂] · 22H₂O towards the hydrolysis of ATP was tested at different pH values. While in solution at pH 3.4 the hydrolysis proceeded to yield AMP (adenosine monophosphate) and ADP (adenosine diphosphate) in nearly equal amounts, reaction mixture at pH 5.8 gave ADP as the only product of hydrolysis after 24 h of reaction. At neutral pH, the hydrolysis of ATP was slower, but it proceeded to yield 75% of ADP after 48 h of reaction.     

Evaluation and elimination of inhibitory effects of salts and heavy metal ions on biodegradation of Congo red by Pseudomonas sp. mutant

In this study, it was attempted to evaluate the influences and also recommended some elimination methods for inhibitory effects offered by salts and heavy metal ions. Congo red dye solution treated with mutant Pseudomonas sp. was taken as a model system for study. The salts used in this study are NaCl, CaCl₂ and MgSO₄·7H₂O. Though the growth was inhibited at concentrations above 4 g/l, toleration was achieved by acclimatization process. In case of heavy metal ions, Cr (VI) showed low inhibition up to 500 mg/l of concentration, compared to Zn (II) and Cu (II). It was due to the presence of chromium reductase enzyme which was confirmed by SDS-PAGE. Zn (II) and Cu (II) ion inhibitions were eliminated by chelation with EDTA. The critical ion concentrations obtained as per Han-Levenspiel model for Cr (VI), Zn (II) and Cu (II) were 0.8958, 0.3028 and 0.204 g/l respectively.     

Novel dioxomolybdenum(VI) and oxomolybdenum(V) complexes with pyridoxal thiosemicarbazone ligands: Synthesis and structural characterisation

New molybdenum complexes were prepared by the reaction of [Mo^VIO₂(acac)₂] or (NH₄)₂[Mo^VOCl₅] with different N-substituted pyridoxal thiosemicarbazone ligands (H₂L¹ = pyridoxal 4-phenylthiosemicarbazone; H₂L² = pyridoxal 4-methylthiosemicarbazone, H₂L³ = pyridoxal thiosemicarbazone). The investigation of monomeric [MoO₂L¹(CH₃OH)] or polymeric [MoO₂L^1-3] molybdenum(VI) complexes revealed that molybdenum is coordinated with a tridentate doubly-deprotonated ligand. In the oxomolybdenum(V) complexes [MoOCl₂(HL^1-3)] the pyridoxal thiosemicarbazonato ligands are tridentate mono-deprotonated. Crystal and molecular structures of molybdenum(VI) [MoO₂L¹(CH₃OH)]·CH₃OH, and molybdenum(V) complexes [MoOCl₂(HL¹)]·C₂H₅OH, as well as of the pyridoxal thiosemicarbazone ligand methanol solvate H₂L³·MeOH, were determined by the single crystal X-ray diffraction method.     

Effect of Dietary High Molybdenum on the Cell Cycle and Apoptosis of Kidney in Broilers

The experiment was conducted with the objective of examining the effects of high molybdenum on the cell cycle and apoptosis of kidney in broilers by the methods of flow cytometry. Three hundred 1-day-old Avian broilers were randomly divided into four groups, and fed on diets as follows: control diet (Mo 13 mg/kg) and high molybdenum diets (Mo 500 mg/kg, high molybdenum group I; Mo 1,000 mg/kg, high molybdenum group II; Mo 1,500 mg/kg, high molybdenum group III) for 6 weeks. The results showed that the relative weight of kidney were higher (P?<?0.05 or P?<?0.01), and the cellular percentages of G₀/G₁ phase were lower, and cellular percentages of S phase and the proliferating index were higher in high molybdenum groups II and III than in control group (P?<?0.01). The percentage of renal cell apoptosis was increased in high molybdenum groups II and III when compared with that of control group (P?<?0.01). Immunohistochemical test showed that there were increased frequencies of positive cells containing Bax protein and decreased frequencies of positive cells containing Bcl-2 protein in high molybdenum groups II and III. It was concluded that dietary high molybdenum (1,000 mg/kg and 1,500 mg/kg) impaired the progression of renal cells from S phase to G₂M phase obviously and induced renal cell apoptosis.     

Preparation and characterization of mixed ammonium salts of Keggin phosphomolybdate

Keggin-type modified ammonium salts of molybdophosporic acid were prepared by partial substituting of the ammonium ions by X (X = Sb^III, Bi^III or Sn^II) ions. They were characterised by BET method, XRD, ³¹P NMR, UV-Vis, Raman, IR spectroscopies and thermal analysis (TG and DTA). It appeared that introducing an element X = Sb or Sn led to partially reduced compound corresponding to the electron exchange occurring between Sb(III) or Sn(II) and Mo(VI) without modification of Keggin structure.     

Different reaction behaviour of molybdenum and tungsten - Reactions of the dichloro dioxo dimethyl-bispyridine complexes with thiophenolate

The reaction of the metal complexes MO₂Cl₂(mebipy) (M = Mo, W) with two equivalents thiophenol by the exact same procedure leads to two different products for molybdenum [Mo₂O₄(SPh)₂(mebipy)₂] and tungsten [WO₂(SPh)₂(mebipy)]. To understand why this is the case the redox potentials of the starting materials were measured showing that the redox potential for thiophenol is lower than the redox potentials (M^V ↔ M^VI) for both of the metal precursors. A reduction of the metal and oxidation of the sulfur should be possible for both reactions but occurs only for the molybdenum compound. Theoretical calculations show that different metal-sulfur bond strengths are as well and equally responsible for the differing reaction behaviour as are the redox potentials.     

Selective recovery of precious metals by persimmon waste chemically modified with dimethylamine

Persimmon waste was chemically modified with dimethylamine (DMA) to obtain a tertiary-amine-type gel, named DMA persimmon waste gel (DMA-PW). It was found to be effective for the adsorption of Au(III), Pd(II), and Pt(IV) in hydrochloric acid medium. In contrast, base metals such as Cu(II), Zn(II), Fe(III), and Ni(II) were not practically adsorbed. The formation of ion pairs of the metal chloro complex anions with the protonated adsorption gels was proposed as the main adsorption process. The gel exhibited selectivity only for precious metals with a remarkably high capacity for Au(III), i.e., 5.63 mol/kg dry gel and comparable capacities, i.e., 0.42 and 0.28 mol/kg for Pd(II) and Pt(IV), respectively. According to the kinetic and electrochemical studies, the adsorption rate of Au(III) was greatly enhanced by the chemical modification. Also, its excellent adsorption characteristics for the precious metals were confirmed by adsorption and elution tests using a column packed with the DMA-PW gel.     

cis-Dioxo-molybdenum(VI)-oxazoline complex catalyzed epoxidation of olefins by tert-butyl hydrogen peroxide

A new efficient catalytic system was investigated for the epoxidation of various olefins by cis-dioxo-bis[2-(2′-hydroxyphenyl)-oxazolinato]molybdenum(VI), cis-[MoO₂(phox)₂], and TBHP as oxidizing agent. Using this system as catalyst for the oxidation of aliphatic substrates at 80 °C gives the epoxide as the sole product with yields up to 100% and turnover frequency up to 5000 h⁻¹. The efficiency of the catalyst is strongly influenced by the nature of solvent, reaction time and temperature, and a significant increase in the epoxide yields is observed in higher temperatures and longer reaction times.     

CV and NMR study on the reaction of Mo(VI) with 3,4-dihydroxybenzoic acid and ascorbic acid in aqueous solution

The gradual release of the ligand 3,4-dihydroxybenzoic acid (3,4-DHBA) from its molybdenum complex in the presence of ascorbic acid (AscA) in a weakly acidic aqueous solution (pH ∼ 3.5) is described. We observed that the formation of the 3,4-DHBA-semiquinone oxidation state and the semidehydroascorbate is a pre-requisite for the release of the 3,4-DHBA ligand. The interaction of these radicals leads at the same time to the further degradation of AscA resulting in, among other compounds, threonic acid which participates in the reaction with molybdenum. The comparison of the complexing ability indicated that threonic acid competes with protocatechuate, while ascorbic acid is a less good ligand for the Mo(VI). Solution studies on the reaction mechanism were performed by cyclic voltammetry, NMR spectroscopy and UV-Vis spectroscopy. Isolated precipitates were investigated by NMR spectroscopy. The antioxidant properties of 3,4-DHBA and AscA were also compared using the stable radical 2,2-diphenyl-1-picrylhydrazyl (DPPH).     

Purification and characterization of high antioxidant peptides from duck egg white protein hydrolysates

The hydrolysate from duck egg white protein (DEWP) prepared by “SEEP–Alcalase” at degree of hydrolysis (DH) value of 21% (namely HSA₂₁) exhibited high antioxidant capacity in different oxidation systems. A consecutive chromatographic method was then developed for separation and purification of HSA₂₁, including ion-exchange chromatography, macroporous adsorption resin (MAR) and gel filter chromatography. The final peptides “P_21-3–75-B” were obtained with significantly enhanced antioxidant activity (p < 0.05). It was further confirmed that the product mainly consisted of five oligopeptides (Mr: 202.1, 294.1, 382.1, 426.3, and 514.4 Da). Furthermore, the antioxidant activity of P_21-3–75-B kept stable after in vitro digestive simulation. Antioxidant capacity of the purified peptides was closely related to the molecular mass, hydrophobic amino acid residues, acidic amino acid and some antioxidant amino acids. This research provided a valuable route for producing new natural-source peptides with strong antioxidant capacity and high nutritious value for our daily intake.