Ethanol induced the formation of β‐sheet and amyloid‐like fibrils by surfactant‐like peptide A6K

Self‐assembly of natural or designed peptides into fibrillar structures based on β‐sheet conformation is a ubiquitous and important phenomenon. Recently, organic solvents have been reported to play inductive roles in the process of conformational change and fibrillization of some proteins and peptides. In this study, we report the change of secondary structure and self‐assembling behavior of the surfactant‐like peptide A6K at different ethanol concentrations in water. Circular dichroism indicated that ethanol could induce a gradual conformational change of A6K from unordered secondary structure to β‐sheet depending upon the ethanol concentration. Dynamic light scattering and atomic force microscopy revealed that with an increase of ethanol concentration the nanostructure formed by A6K was transformed from nanosphere/string‐of‐beads to long and smooth fibrils. Furthermore, Congo red staining/binding and thioflavin‐T binding experiments showed that with increased ethanol concentration, the fibrils formed by A6K exhibited stronger amyloid fibril features. These results reveal the ability of ethanol to promote β‐sheet conformation and fibrillization of the surfactant‐like peptide, a fact that may be useful for both designing self‐assembling peptide nanomaterials and clarifying the molecular mechanism behind the formation of amyloid fibrils. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Spectroscopic characterization of diverse amyloid fibrils in vitro by the fluorescent dye Nile red

The fluorescence of Nile red (9-diethylamino-5H-benzophenoxazine-5-one) is quenched in aqueous solutions but shows augmented fluorescence in hydrophobic environments. Nile red fluorescence was blue shifted and strongly augmented in the presence of various amyloid fibrils assayed under acidic as well as neutral pH conditions. Fibrils grown from lysozyme and insulin (at pH 1.6 and 65 °C), transthyretin (TTR) fibrils grown from the acid unfolded monomer (pH 2.0, 21 °C) or from the dissociated tetramer starting from native protein under less acidic conditions (pH 4.4, 37 °C) were detected. Nile red was also successfully employed in detecting Aβ1-42 and human prion protein (PrP90-231) amyloid fibrils grown at neutral pH. Nile red was amyloid fibril specific and did not fluoresce appreciably in the presence of the monomeric precursor proteins. Stoke's shifts of the wavelength maximum of Nile red bound to various fibrils were different (ranging from 615 nm to 638 nm) indicating sensitivity to the tertiary structure in its respective binding sites of different amyloid proteins. A polarity assay using ethanol-water mixtures and pure octanol ranging from dielectric constants between 10 and 70 showed a linear correlation of Nile red Stoke's shift and allowed assignment of amyloid fibril binding site polarity. Fluorescence resonance energy transfer between Thioflavin T (ThT) and Nile red was proven to be efficient and co-staining was employed to discriminate between conformational isoforms of Aβ1-42 amyloid fibrils grown under agitated and quiescent conditions. This paper demonstrates the complementary use of this fluorometric method for conformational typing of amyloid structures.     

Amyloidogenesis of Tau protein

The role of microtubule‐associated protein Tau in neurodegeneration has been extensively investigated since the discovery of Tau amyloid aggregates in the brains of patients with Alzheimer's disease (AD). The process of formation of amyloid fibrils is known as amyloidogenesis and attracts much attention as a potential target in the prevention and treatment of neurodegenerative conditions linked to protein aggregation. Cerebral deposition of amyloid aggregates of Tau is observed not only in AD but also in numerous other tauopathies and prion diseases. Amyloidogenesis of intrinsically unstructured monomers of Tau can be triggered by mutations in the Tau gene, post‐translational modifications, or interactions with polyanionic molecules and aggregation‐prone proteins/peptides. The self‐assembly of amyloid fibrils of Tau shares a number of characteristic features with amyloidogenesis of other proteins involved in neurodegenerative diseases. For example, in vitro experiments have demonstrated that the nucleation phase, which is the rate‐limiting stage of Tau amyloidogenesis, is shortened in the presence of fragmented preformed Tau fibrils acting as aggregation templates (“seeds”). Accordingly, Tau aggregates released by tauopathy‐affected neurons can spread the neurodegenerative process in the brain through a prion‐like mechanism, originally described for the pathogenic form of prion protein. Moreover, Tau has been shown to form amyloid strains—structurally diverse self‐propagating aggregates of potentially various pathological effects, resembling in this respect prion strains. Here, we review the current literature on Tau aggregation and discuss mechanisms of propagation of Tau amyloid in the light of the prion‐like paradigm.     

The binding of thioflavin-T to amyloid fibrils: localisation and implications

Amyloid fibrils are a polymeric form of protein, involving a continuous beta-sheet with the strands perpendicular to the long axis of the fibril. Although typically implicated in diseases such as Alzheimer's disease and the transmissible spongiform encephalopathies, non disease-associated protein can also be converted into amyloid fibrils. Traditionally, amyloid fibrils are identified via the use of specific dyes such as Congo red and thioflavin-T, although their specificity is ill understood. Recently, solutions of bovine insulin and bovine beta-lactoglobulin have been found to form spherulites, micron-sized spherical structures containing radially arranged amyloid fibrils. When studied by confocal microscopy using polarised laser light and thioflavin-T, a consistent pattern of emission, rather than a uniform disc, was observed. This suggests the dye binds in a specific, regular fashion to amyloid fibrils. Confocal microscopy studies of thioflavin-T aligned in stretched poly-vinyl alcohol films showed that the dye dipole excitation axis lies parallel to the long molecular axis. Therefore, thioflavin-T binds to amyloid fibrils such that their long axes are parallel. We propose binding occurs in 'channels' that run along the length of the beta-sheet. Steric interactions between dye molecules and side chains indicate why thioflavin-T fluoresces more intensely when bound to amyloid fibrils and can explain why this interaction with amyloid fibrils is specific, but with varying efficiency.     

Optical microscopy of growing insulin amyloid spherulites on surfaces in vitro

Amyloid fibrils are often found arranged into large ordered spheroid structures, known as spherulites, occurring in vivo and in vitro. The spherulites are predominantly composed of radially ordered amyloid fibrils, which self-assemble from protein in solution. We have observed and measured amyloid spherulites forming from heat-treated solutions of bovine insulin at low pH. The spherulites form in large numbers as semispherical dome-shaped objects on the cell surfaces, showing that surface defects or impurities, or the substrates themselves, can provide good nucleation sites for their formation. Using optical microscopy, we have measured the growth of individual spherulites as a function of time and in various conditions. There is a lag time before nucleation of the spherulites. Once they have nucleated, they grow, each with a radius increasing linearly, or faster than linearly, with time. Remarkably, this growth period has a sudden end, at which all spherulites in the system suddenly stop growing. A model of spherulite formation based on the polymerization of oriented fibrils around a nucleus, from a precursor in solution, quantitatively accounts for the observed growth kinetics. Seeding of native insulin solutions with preformed spherulites led to the preformed spherulites growing without a lag time. This seeding behavior is evidence that the fibrils in the spherulites assemble from small protein species rather than fibrils. The density of the spherulites was also measured and found to be constant with respect to radius, indicating that the space fills as the spherulite grows.     

Aggregation and conformational studies on a pentapeptide derivative

Most of the disease causing proteins such as beta amyloid, amylin, and huntingtin protein, which are natively disordered, readily form fibrils consisting of beta-sheet polymers. Though all amyloid fibrils are made up of beta-sheet polymers, not all peptides with predominant beta-sheet content in the native state develop into amyloid fibrils. We hypothesize that stable amyloid like fibril formation may require mixture of different conformational states in the peptide. We have tested this hypothesis on amyloid forming peptide namely HCl(Ile)(5)NH(CH(2)CH(2)O)(3)CH(3) (I). We show peptide I, has propensity to form self-assembled structures of beta-sheets in aqueous solutions. When incubated over a period of time in aqueous buffer, I self assembled into beta sheet like structures with diameters ranging from 30 to 60 A that bind with amyloidophilic dyes like Congo red and Thioflavin T. Interestingly peptide I developed into unstable fibrils after prolonged aging at higher concentration in contrast with the general mature fibril-forming propensity of various amyloid petides known to date.     

Amyloid fibril formation from crude protein mixtures

Amyloid fibrils have potential as bionanomaterials. A bottleneck in their commercial use is the cost of the highly purified protein typically needed as a starting material. Thus, an understanding of the role of heterogeneity in the mixtures from which amyloid fibrils are formed may inform production of these structures from readily available impure starting materials. Insulin, a very well understood amyloid-forming protein, was modified by various reagents to explore whether amyloid fibrils could still form from a heterogeneous mixture of insulin derivatives. Aggregates were characterized by thioflavin T fluorescence and transmission electron microscopy. Using acetylation, reduction carboxymethylation, reduction pyridylethylation, trypsin digestion and chymotrypsin digestion, it was shown that amyloid fibrils can form from heterogeneous mixtures of modified insulin. The modifications changed both the rate of reaction and the yield of the final product, but led to fibrillar structures, some with interesting morphologies. Well defined, long, unbranched fibrils were observed in the crude reduced carboxymethylated insulin mixture and the crude reduced pyridylethylated insulin revealed the formation of "wavy" fibrils, compared with the straighter native insulin amyloid fibrils. Although trypsin digestion inhibited fibrils formation, chymotrypsin digestion of insulin produced a mixture of long and short fibrils under the same conditions. We conclude that amyloid fibrils may be successfully formed from heterogeneous mixtures and, further, that chemical modification may provide a simple means of manipulating protein fibril assembly for use in bionanotechnological applications, enabling some design of overall morphology in the bottom-up assembly of higher order protein structures from amyloid fibrils.     

The mechanism of amyloid spherulite formation by bovine insulin

The formation of amyloid-containing spherulite-like structures has been observed in some instances of amyloid diseases, as well as in amyloid fibril-containing solutions in vitro. In this article we describe the structure and kinetics of bovine insulin amyloid fibril spherulites formed in the presence and absence of different salts and at different salt concentrations. The general spherulite structure consists of radially oriented amyloid fibrils, as shown by optical microscopy and environmental scanning electron microscopy. In the center of each spherulite, a "core" of less regularly oriented material is observed, whose size decreases when the spherulites are formed in the presence of increasing concentrations of NaCl. Similarly, amyloid fibrils form faster in the presence of NaCl than in its absence. A smaller enhancement of the rate of formation with salt concentration is observed for spherulites. These data suggest that both amyloid fibril formation and random aggregation occur concurrently under the conditions tested. Changes in their relative rates result in the different-sized cores observed in the spherulites. This mechanism can be likened to that leading to the formation of spherulites of polyethylene, in agreement with observations that polypeptide chains under partially denaturing conditions can exhibit behavior not dissimilar to that of synthetic polymers.     

Hydrophobic tail length plays a pivotal role in amyloid beta (25–35) fibril–surfactant interactions

The amyloid β‐peptide fragment comprising residues 25–35 (Aβ_25‐35) is known to be the most toxic fragment of the full length Aβ peptide which undergoes fibrillation very rapidly. In the present work, we have investigated the effects of the micellar environment (cationic, anionic, and nonionic) on preformed Aβ_25‐35 fibrils. The amyloid fibrils have been prepared and characterized by several biophysical and microscopic techniques. Effects of cationic dodecyl trimethyl ammonium bromide (DTAB), cetyl trimethylammonium bromide (CTAB), anionic sodium dodecyl sulfate (SDS), and nonionic polyoxyethyleneoctyl phenyl ether (Triton X‐100 or TX) on fibrils have been studied by Thioflavin T fluorescence, UV–vis spectroscopy based turbidity assay and microscopic analyses. Interestingly, DTAB and SDS micelles were observed to disintegrate prepared fibrils to some extent irrespective of their charges. CTAB micelles were found to break down the fibrillar assembly to a greater extent. On the other hand, the nonionic surfactant TX was found to trigger the fibrillation process. The presence of a longer hydrophobic tail in case of CTAB is assumed to be a reason for its higher fibril disaggregating efficacy, the premise of their formation being largely attributed to hydrophobic interactions. Proteins 2016; 84:1213–1223. © 2016 Wiley Periodicals, Inc.     

Probing the pressure-temperature stability of amyloid fibrils provides new insights into their molecular properties

A number of medical disorders, including Alzheimer's disease and type II diabetes, is characterised by the deposition of amyloid fibrils in tissue. The insolubility and size of the fibrils has largely precluded the determination of their structures at high resolution. Studies probing the stability of amyloid fibrils can reveal which non-covalent interactions are important in the formation and maintenance of the fibril structure. In particular, we review here the use of high hydrostatic pressure and high temperature as perturbation techniques. In general, small aggregates formed early in the assembly process can be dissociated by high pressure, but mature amyloid fibrils are highly pressure stable. This finding suggests that a temporal transition occurs during which side chain packing and hydrogen bond formation are optimised, whereas the hydrophobic effect and electrostatic interactions play a dominant role in the early stages of the aggregation. High temperatures, however, can disrupt most aggregates. Though the observed stability of amyloid fibrils is not unique to these structures, the notion that amyloid fibrils can represent the global minimum in free energy is supported by this type of investigations. Some implications regarding the nature of toxic species, associated with at least many of the amyloid disorders, and recently proposed structural models are discussed.     

Self‐assembled nanostructures of long‐acting GnRH analogs modified at position 7

It is well known that GnRH analogs can self‐assemble into amyloid fibrils and that the duration of action of GnRH analogs depends on the ability of the amyloid to slowly release active peptides. The aim of this study was to investigate the influence of the amino acid residues at position 7 of GnRH analogues on peptide self‐assembly. It was found that the dominant shape of the nanostructure can be changed when the structures of the residues at position 7 differ significantly from that of leucine in Degarelix. When the backbone length was extended (peptide 9), or the side chain of the residue at position 7 was replaced by an aromatic ring (peptide 6), or the rotation of the amide bond was restricted (peptide 8), the nanostructure changed from fibrils to vesicles. The results also indicate that the increasing hydrophilicity had little influence on the nanostructure morphology. In addition, a suitable release rate was found to play a more important role for the duration of the peptide action by maintaining the equilibrium between the drug concentration and the persistent release time, while the nanostructure shape was found to exert little influence on the duration of the peptide action. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Abeta protofibrils possess a stable core structure resistant to hydrogen exchange

Protofibrils are transient structures observed during in vitro formation of mature amyloid fibrils and have been implicated as the toxic species responsible for cell dysfunction and neuronal loss in Alzheimer's disease (AD) and other protein aggregation diseases. To better understand the roles of protofibrils in amyloid assembly and Alzheimer's disease, we characterized secondary structural features of these heterogeneous and metastable assembly intermediates. We chromatographically isolated different size populations of protofibrils from amyloid assembly reactions of Abeta(1-40), both wild type and the Arctic variant associated with early onset familial AD, and exposed them to hydrogen-deuterium exchange analysis monitored by mass spectrometry (HX-MS). We show that HX-MS can distinguish among unstructured monomer, protofibrils, and fibrils by their different protection patterns. We find that about 40% of the backbone amide hydrogens of Abeta protofibrils are highly resistant to exchange with deuterium even after 2 days of incubation in aqueous deuterated buffer, implying a very stable, presumably H-bonded, core structure. This is in contrast to mature amyloid fibrils, whose equally stable structure protects about 60% of the backbone amide hydrogens over the same time frame. We also find a surprising degree of specificity in amyloid assembly, in that wild type Abeta is preferentially excluded from both protofibrils and fibrils grown from an equimolar mixture of wild type and Arctic mutant peptides. These and other data are interpreted and discussed in terms of the role of protofibrils in fibril assembly and in disease.     

An amyloid organelle, solid-state NMR evidence for cross-β assembly of gas vesicles

Functional amyloids have been identified in a wide range of organisms, taking on a variety of biological roles and being controlled by remarkable mechanisms of directed assembly. Here, we report that amyloid fibrils constitute the ribs of the buoyancy organelles of Anabaena flos-aquae. The walls of these gas-filled vesicles are known to comprise a single protein, GvpA, arranged in a low pitch helix. However, the tertiary and quaternary structures have been elusive. Using solid-state NMR correlation spectroscopy we find detailed evidence for an extended cross-β structure. This amyloid assembly helps to account for the strength and amphiphilic properties of the vesicle wall. Buoyancy organelles thus dramatically extend the scope of known functional amyloids.     

Rapid Generation of Amyloid from Native Proteins In vitro

Proteins carry out crucial tasks in organisms by exerting functions elicited from their specific three dimensional folds. Although the native structures of polypeptides fulfill many purposes, it is now recognized that most proteins can adopt an alternative assembly of beta-sheet rich amyloid. Insoluble amyloid fibrils are initially associated with multiple human ailments, but they are increasingly shown as functional players participating in various important cellular processes. In addition, amyloid deposited in patient tissues contains nonproteinaceous components, such as nucleic acids and glycosaminoglycans (GAGs). These cofactors can facilitate the formation of amyloid, resulting in the generation of different types of insoluble precipitates. By taking advantage of our understanding how proteins misfold via an intermediate stage of soluble amyloid precursor, we have devised a method to convert native proteins to amyloid fibrils in vitro. This approach allows one to prepare amyloid in large quantities, examine the properties of amyloid generated from specific proteins, and evaluate the structural changes accompanying the conversion.     

Amyloid-like features of polyglutamine aggregates and their assembly kinetics

The repeat length-dependent tendency of the polyglutamine sequences of certain proteins to form aggregates may underlie the cytotoxicity of these sequences in expanded CAG repeat diseases such as Huntington's disease. We report here a number of features of various polyglutamine (polyGln) aggregates and their assembly pathways that bear a resemblance to generally recognized defining features of amyloid fibrils. PolyGln aggregation kinetics displays concentration and length dependence and a lag phase that can be abbreviated by seeding. PolyGln aggregates exhibit classical beta-sheet-rich circular dichroism spectra consistent with an amyloid-like substructure. The fundamental structural unit of all the in vitro aggregates described here is a filament about 3 nm in width, resembling the protofibrillar intermediates in amyloid fibril assembly. We observed these filamentous structures either as isolated threads, as components of ribbonlike sheets, or, rarely, in amyloid-like twisted fibrils. All of the polyGln aggregates described here bind thioflavin T and shift its fluorescence spectrum. Although all polyGln aggregates tested bind the dye Congo red, only aggregates of a relatively long polyGln peptide exhibit Congo red birefringence, and this birefringence is only observed in a small portion of these aggregates. Remarkably, a monoclonal antibody with high selectivity for a generic amyloid fibril conformational epitope is capable of binding polyGln aggregates. Thus, polyGln aggregates exhibit most of the characteristic features of amyloid, but the twisted fibril structure with Congo red birefringence is not the predominant form in the polyGln repeat length range studied here. We also find that polyGln peptides exhibit an unusual freezing-dependent aggregation that appears to be caused by the freeze concentration of peptide and/or buffer components. This is of both fundamental and practical significance. PolyGln aggregation is revealed to be a highly specific process consistent with a significant degree of order in the molecular structure of the product. This ordered structure, or the assembly process leading to it, may be responsible for the cell-specific neuronal degeneration observed in Huntington's and other expanded CAG repeat diseases.     

Relationship between prion propensity and the rates of individual molecular steps of fibril assembly

Peptides and proteins possess an inherent propensity to self-assemble into generic fibrillar nanostructures known as amyloid fibrils, some of which are involved in medical conditions such as Alzheimer disease. In certain cases, such structures can self-propagate in living systems as prions and transmit characteristic traits to the host organism. The mechanisms that allow certain amyloid species but not others to function as prions are not fully understood. Much progress in understanding the prion phenomenon has been achieved through the study of prions in yeast as this system has proved to be experimentally highly tractable; but quantitative understanding of the biophysics and kinetics of the assembly process has remained challenging. Here, we explore the assembly of two closely related homologues of the Ure2p protein from Saccharomyces cerevisiae and Saccharomyces paradoxus, and by using a combination of kinetic theory with solution and biosensor assays, we are able to compare the rates of the individual microscopic steps of prion fibril assembly. We find that for these proteins the fragmentation rate is encoded in the structure of the seed fibrils, whereas the elongation rate is principally determined by the nature of the soluble precursor protein. Our results further reveal that fibrils that elongate faster but fracture less frequently can lose their ability to propagate as prions. These findings illuminate the connections between the in vitro aggregation of proteins and the in vivo proliferation of prions, and provide a framework for the quantitative understanding of the parameters governing the behavior of amyloid fibrils in normal and aberrant biological pathways.     

Competing pathways determine fibril morphology in the self-assembly of beta2-microglobulin into amyloid

Despite its importance in biological phenomena, a comprehensive understanding of the mechanism of amyloid formation remains elusive. Here, we use atomic force microscopy to map the formation of beta2-microglobulin amyloid fibrils with distinct morphologies and persistence lengths, when protein concentration, pH and ionic strength are varied. Using the resulting state-diagrams, we demonstrate the existence of two distinct competitive pathways of assembly, which define an energy landscape that rationalises the sensitivity of fibril morphology on the solution conditions. Importantly, we show that semi-flexible (worm-like) fibrils, which form rapidly during assembly, are kinetically trapped species, formed via a non-nucleated pathway that is explicitly distinct from that leading to the formation of the relatively rigid long-straight fibrils classically associated with amyloid. These semi-flexible fibrils also share an antibody epitope common to other protein oligomers that are known to be toxic species linked to human disease. The results demonstrate the heterogeneity of amyloid assembly, and have important implications for our understanding of the importance of oligomeric states in amyloid disease, the origins of prion strains, and the development of therapeutic strategies.     

Dichotomous versus palm-type mechanisms of lateral assembly of amyloid fibrils

Despite possessing a common cross-beta core, amyloid fibrils are known to exhibit great variations in their morphologies. To date, the mechanism responsible for the polymorphism in amyloid fibrils is poorly understood. Here we report that two variants of mammalian full-length prion protein (PrP), hamster (Ha) and mouse (Mo) PrPs, produced morphologically distinguishable subsets of mature fibrils under identical solvent conditions. To gain insight into the origin of this morphological diversity we analyzed the early stages of polymerization. Unexpectedly, we found that despite a highly conserved amyloidogenic region (94% identity within the residues 90-230), Ha and Mo PrPs followed two distinct pathways for lateral assembly of protofibrils into mature, higher order fibrils. The protofibrils of Ha PrP first formed irregular bundles characterized by a peculiar palm-type shape, which ultimately condensed into mature fibrils. The protofibrils of Mo PrP, on the other hand, associated in pairs in a pattern resembling dichotomous coalescence. These pathways are referred to here as the palm-type and dichotomous mechanisms. Two distinct mechanisms for lateral assembly explain striking differences in morphology of mature fibrils produced from closely related Mo and Ha PrPs. Remarkable similarities between subtypes of amyloid fibrils generated from different proteins and peptides suggest that the two mechanisms of lateral assembly may not be limited to prion proteins but may be a common characteristic of polymerization of amyloidogenic proteins and peptides in general.