Liquid chromatography high‐resolution mass spectrometry for fatty acid profiling

Quantification of fatty acids has been crucial to elucidate lipid biosynthesis pathways in plants. To date, fatty acid identification and quantification has relied mainly on gas chromatography (GC) coupled to flame ionization detection (FID) or mass spectrometry (MS), which requires the derivatization of samples and the use of chemical standards for annotation. Here we present an alternative method based on a simple procedure for the hydrolysis of lipids, so that fatty acids can be quantified by liquid chromatography mass spectrometry (LC‐MS) analysis. Proper peak annotation of the fatty acids in the LC‐MS‐based methods has been achieved by LC‐MS measurements of authentic standard compounds and elemental formula annotation supported by ¹³C isotope‐labeled Arabidopsis. As a proof of concept, we have compared the analysis by LC‐MS and GC‐FID of two previously characterized Arabidopsis thaliana knock‐out mutants for FAD6 and FAD7 desaturase genes. These results are discussed in light of lipidomic profiles obtained from the same samples. In addition, we performed untargeted LC‐MS analysis to determine the fatty acid content of two diatom species. Our results indicate that both LC‐MS and GC‐FID analyses are comparable, but that because of higher sensitivity and selectivity the LC‐MS‐based method allows for a broader coverage and determination of novel fatty acids.     

Isolation and characterization of fatty acid methyl ester (FAME)‐producing Streptomyces sp. S161 from sheep (Ovis aries) faeces

An actinomycete producing oil‐like mixtures was isolated and characterized. The strain was isolated from sheep faeces and identified as Streptomyces sp. S161 based on 16S rRNA gene sequence analysis. The strain showed cellulase and xylanase activities. The ¹H nuclear magnetic resonance (NMR) spectra of the mixtures showed that the mixtures were composed of fatty acid methyl esters (52·5), triglycerides (13·7) and monoglycerides (9·1) (mol.%). Based on the gas chromatography–mass spectrometry (GC‐MS) analysis, the fatty acid methyl esters were mainly composed of C14‐C16 long‐chain fatty acids. The results indicated that Streptomyces sp. S161 could produce fatty acid methyl esters (FAME) directly from starch. To our knowledge, this is the first isolated strain that can produce biodiesel (FAME) directly from starch.

Significance and Impact of the Study

Nowadays, production of biodiesel is based on plant oils, animal fats, algal oils and microbial oils. Lipid mostly consists of triacylglycerols (TAG), and conversion of these lipids into fatty acid short‐chain alcohol esters (methanol or ethanol) is the final step in biodiesel production. In this study, an oil‐producing Streptomyces strain was isolated from sheep faeces. The oil was composed of C₁₄‐C₁₆ long‐chain fatty acid methyl esters, triglycerides and monoglycerides. This is the first isolated strain‐producing biodiesel (FAME) directly from starch. Due to showing cellulase and xylanase activities, the strain would be helpful for converting renewable lignocellulose into biodiesel directly.     

Essential‐Oil and Fatty‐Acid Composition,and Antioxidant Activity of Extracts of Ficaria kochii

The essential‐oil and fatty‐acid composition of the aerial parts of Ficaria kochii (Ledeb .) Iranshahr & Rech .f. native to Iran, and the antioxidant activity of various extracts of this plant were examined. The study by GC‐FID and GC/MS analysis of the essential oil resulted in the identification of 61 compounds, representing 86.01% of the total oil composition. Phytol (10.49%), farnesol (7.72%), methyl linoleate (5.57%), and α‐farnesene (4.96%) were the main components. The fatty‐acid composition of the aerial parts of F. kochii was also analyzed by GC/MS. The major components were palmitic acid (25.9%), linolenic acid (25.3%), and linoleic acid (17.5%). Polyunsaturated fatty acids (PUFAs) were found in higher amounts than saturated fatty acids. The possible antioxidant activity of various extracts (prepared by using solvents with different polarity) of the F. kochii aerial parts was evaluated by screening for their 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) radical‐scavenging activity, Fe^III‐reducing power, total antioxidant activity, and inhibitory activity in the linoleic acid‐peroxidation system. H₂O proved to be the most efficient solvent for the extraction of antioxidants, as the H₂O extract contained the highest amount of phenolic compounds (2.78±0.23 GAE/g dry matter) and also exhibited the strongest antioxidant capacity in all the assays used. The results of the present investigation demonstrated that the aerial parts of F. kochii can be used as natural and safe nutrition supplement in place of synthetic ones.     

Determination of hydroxylated fatty acids from the biopolymer of tomato cutin and their fate during incubation in soil

Introduction – The plant cuticle is a thin, predominantly lipid layer that covers all primary aerial surfaces of vascular plants. The monomeric building blocks of the cutin biopolymer are mainly ω‐hydroxy fatty acids. Objective – Analysis of ω‐hydroxy fatty acids from cutin isolated from tomato fruits at different stages of decomposition in soil. Different derivatives and mass spectrometric techniques were used for peak identification and evaluation. Methodology – Preparation of purified cutin involving dewaxing and HCl treatment. Incubation of purified cutin for 20 months in soil. Pentafluorobenzoyl derivatives were used for GC/MS operated in the electron capture negative ion (ECNI) mode and trimethylsilyl ethers for GC/MS operated in the electron ionisation (EI) mode for analysis of ω‐hydroxy fatty acids. Results – Six ω‐hydroxy fatty acids were detected in the purified cutin, three of which were identified as degradation products of 9,16‐dihydroxyhexadecanoic acid as a consequence of the HCl treatment involved in the purification step. Incubation of the isolated cutin in soil was accompanied with decrease in concentration of all hydroxyl fatty acids. Conclusion – We produced evidence that the HCl treatment only affected free hydroxyl groups and thus could be used for proportioning free and bound OH‐groups on cutin fatty acids. The method enabled a direct quantification of the ω‐hydroxy fatty acids throughout the incubation phase. Copyright © 2010 John Wiley & Sons, Ltd.     

Fatty‐Acid Profile of Total and Polar Lipids in Cultured Rainbow Trout (Oncorhynchus mykiss) Raised in Freshwater and Seawater (Croatia) Determined by Transmethylation Method

Fatty acids from total lipids and polar lipids in cultured rainbow trout (Oncorhynchus mykiss) raised in seawater (SW) and freshwater (FW) were identified and quantified from the muscle samples in January, April, and July. The highest total lipid and polar lipid amounts were found in April. July contents of total lipids were low, but percent of the polyunsaturated fatty acids (PUFAs) was high in SW and FW environment (particularly n‐3 PUFAs). Variety of 17 fatty acids was identified by GC‐FID after transmethylation. The predominant fatty acids in rainbow trout from SW and FW were: docosahexaenoic acid among n‐3 PUFAs, palmitic acid among saturated fatty acids (SFAs), and oleic acid among monounsaturated fatty acids (MUFAs). Appreciably higher n‐3/n‐6 ratio was found in total lipids in April (6.40, FW fish) and in polar lipids in July (18.76; SW fish). High n‐3/n‐6 ratio in total lipids and polar lipids of rainbow trout from SW and FW, besides beneficial n‐3/n‐6 ratio in the commercial fish food, could be characteristic for the local environmental conditions (Croatia).     

Production of algae-based biodiesel using the continuous catalytic Mcgyan® process

This study demonstrates the production of algal biodiesel from Dunaliella tertiolecta, Nannochloropsis oculata, wild freshwater microalgae, and macroalgae lipids using a highly efficient continuous catalytic process. The heterogeneous catalytic process uses supercritical methanol and porous titania microspheres in a fixed bed reactor to catalyze the simultaneous transesterification and esterification of triacylglycerides and free fatty acids, respectively, to fatty acid methyl esters (biodiesel). Triacylglycerides and free fatty acids were converted to alkyl esters with up to 85% efficiency as measured by 300 MHz ¹H NMR spectroscopy. The lipid composition of the different algae was studied gravimetrically and by gas chromatography. The analysis showed that even though total lipids comprised upwards of 19% of algal dry weight the saponifiable lipids, and resulting biodiesel, comprised only 1% of dry weight. Thus highlighting the need to determine the triacylglyceride and free fatty acid content when considering microalgae for biodiesel production.     

Simultaneous conversion of free fatty acids and triglycerides to biodiesel by immobilized Aspergillus oryzae expressing Fusarium heterosporum lipase

The presence of high levels of free fatty acids (FFA) in oil is a barrier to one‐step biodiesel production. Undesirable soaps are formed during conventional chemical methods, and enzyme deactivation occurs when enzymatic methods are used. This work investigates an efficient technique to simultaneously convert a mixture of free fatty acids and triglycerides (TAG). A partial soybean hydrolysate containing 73.04% free fatty acids and 24.81% triglycerides was used as a substrate for the enzymatic production of fatty acid methyl ester (FAME). Whole‐cell Candida antarctica lipase B‐expressing Aspergillus oryzae, and Novozym 435 produced only 75.2 and 73.5% FAME, respectively. Fusarium heterosporum lipase‐expressing A. oryzae produced more than 93% FAME in 72 h using three molar equivalents of methanol. FFA and TAG were converted simultaneously in the presence of increasing water content that resulted from esterification. Therefore, F. heterosporum lipase with a noted high level of tolerance of water could be useful in the industrial production of biodiesel from feedstock that has high proportion of free fatty acids.     

Analysis of fatty acids in A. szechenyianum Gay. by microwave‐assisted extraction and gas chromatography‐mass spectrometry

Introduction – Aconitum szechenyianum Gay. is a traditional Chinese medicinal herb with the detumescent and styptic effects and antitumor activity. There have been only a few researches on its chemical components, but no detailed report has appeared on its fatty acids. Objective – To develop a simple and effective method for the extraction of fatty acids from A. zechenyianum Gay. and then to investigate the fatty acid components. Methodology – Microwave‐assisted extraction (MAE) was optimized with response surface methodology, and the fatty acid compositions of extract were determined by GC–MS with previous derivatisation to fatty acid methyl esters (FAMEs). The results were compared with that obtained by classical Soxhlet extraction (SE). Results – Compared with SE, MAE showed significantly higher fatty acid yields, shorter extraction time, and lower energy and solvent consumption. The major fatty acids in A. szechenyianum Gay. are linoleic acid, palmitic acid, linolenic acid, oleic acid and stearic acid, and the unsaturated fatty acids occupy 66.4% of the total fatty acids. Copyright © 2010 John Wiley & Sons, Ltd.     

Total lipid and fatty acid composition of seaweeds for the selection of species for oil‐based biofuel and bioproducts

We investigated the potential of seaweeds as feedstock for oil‐based products, and our results support macroalgae (seaweeds) as a biomass source for oil‐based bioproducts including biodiesel. Not only do several seaweeds have high total lipid content above 10% dry weight, but in the brown alga Spatoglossum macrodontum 50% of these lipids are in the form of extractable fatty acids. S. macrodontum had the highest fatty acid content (57.40 mg g^?1 dw) and a fatty acid profile rich in saturated fatty acids with a high content of C18:1, which is suitable as a biofuel feedstock. Similarly, the green seaweed Derbesia tenuissima has high levels of fatty acids (39.58 mg g^?1 dw), however, with a high proportion of PUFA (n‐3) (31% of total lipid) which are suitable as nutraceuticals or fish oil replacements. Across all species of algae the critical parameter of fatty acid content (measured as fatty acid methyl esters, FAME) was positively correlated (R² = 0.67) with total lipid content. However, the proportion of fatty acids to total lipid decreased markedly with total lipid content, generally between 30% and 50%, making it an inaccurate measure of the potential to identify seaweeds suitable for oil‐based bioproducts. Finally, we quantified within species variation of fatty acids across locations and sampling periods supporting either environmental effects on quantitative fatty acid profiles, or genotypes with specific quantitative fatty acid profiles, thereby opening the possibility to optimize the fatty acid content and quality for oil production through specific culture conditions and selective breeding.     

Myrtus communis berry color morphs: a comparative analysis of essential oils, fatty acids, phenolic compounds, and antioxidant activities

Extracts of mature dark blue and white berries from two Tunisian Myrtus communis morphs growing at the same site were assessed for their essential‐oil and fatty‐acid compositions, phenolic contents, and antioxidant activities. The GC and GC/MS analyses of the essential oils allowed the identification of 33 constituents. The oils from the dark blue fruits showed high percentages of α‐pinene (11.1%), linalool (11.6%), α‐terpineol (15.7%), methyl eugenol (6.2%), and geraniol (3.7%). Myrtenyl acetate (20.3%) was found to be the major compound in the oils from white berries. GC Analysis of the pericarp and seed fatty acids showed that the polyunsaturated fatty acids constituted the major fraction (54.3–78.1%). The highest percentages of linoleic acid (78.0%) and oleic acid (20.0%) were observed in the seeds and the pericarps of the white fruits, respectively. The total phenol, flavonoid, and flavonol contents and the concentration of the eight anthocyanins, identified by HPLC analysis, were significantly higher in the dark blue fruits. All extracts showed a substantial antioxidant activity, assessed by the free radical‐scavenging activity and the ferric reducing power, with the dark blue fruit extracts being more effective.     

Effect of Conidiobolus coronatus on the Cuticular and Internal Lipid Composition of Tettigonia viridissima Males

Conidiobolus coronatus is an entomopathogenic fungus which has a potential as a biological control agent of insects. The cuticular and internal lipid composition of infected and noninfected Tettigonia viridissima males were analyzed by GC/MS. A total of 49 compounds were identified in the infected and noninfected males, including fatty acids, fatty acid methyl esters (FAMEs), n‐alkanes, alcohols, sterols, and other organic compounds. The most abundant components of the cuticular and internal lipids of the insects were fatty acids. After exposure to C. coronatus, the cuticular lipids of the T. viridissima males contained 17 free fatty acids from C(8) to C(22), while the cuticular lipids of the noninfected insects contained only 15 fatty acids from C(12) to C(24). The cuticular and internal lipids of both the infected and the noninfected males also contained five FAMEs from C(15) to C(19), seven n‐alkanes from C(25) to C(34), five alcohols from C(16) to C(25), five sterols, and the following six other organic compounds: azelaic acid, phenylacetic acid, glutaric acid, benzoic acid, sebacic acid, and glycerol. The compounds which were present only in the cuticular lipids of the infected males could be due to fungal infection.     

Alteration of fatty acid chain length of Chlamydomonas reinhardtii by simultaneous expression of medium‐chain‐specific thioesterase and acyl carrier protein

Biofuel from fatty acids with chain lengths of 8–15 (C8–C15) have properties similar to those of conventional diesel and jet fuels, thus, can save time and reduce costs for the refurbishment of engines and maintenance of oiling facilities. Most oil‐producing algae yield C16–C18 fatty acids; however, the manipulation of algae using genetic engineering is a promising approach to obtain C8–C15 fatty acids. The introduction of a medium‐chain‐specific thioesterase (TE) is expected to effectively alter algae to produce medium‐chain fatty acids (MCFAs). TE is the main determinant of fatty acid chain length as it releases fatty acids from the acyl carrier protein (ACP) in the fatty acid elongation cycle. In a previous study, the introduction of heterologous C8–C12‐specific TEs into Chlamydomonas reinhardtii did not increase the yield of MCFAs. This effect was attributed to a low affinity of the heterologous TEs to C. reinhardtii ACP. Therefore, we introduced both the C10–C14‐specific TE gene and the ACP gene from the land plant Cuphea lanceolata into C. reinhardtii. We measured free fatty acids (FFAs) and triacylglycerols (TAGs) in the transformants using liquid chromatography–mass spectrometry. The production of C12:0 and C14:0, chain length 12 and 14 without unsaturation, FFAs was not significantly increased in any of the tested strains. However, we found a slight but significant increase in TAG‐containing MCFAs in both TE only and TE–ACP transformants. The increased production rate of C14:0‐containing TAGs ranged from 1.25‐ to 1.58‐fold, indicating the ability of medium‐chain‐specific TE to increase MCFAs. These results suggest that the selection of specific TEs is important when modifying eukaryotic algae to produce MCFAs.     

Simulated eutrophication and browning alters zooplankton nutritional quality and determines juvenile fish growth and survival

The first few months of life is the most vulnerable period for fish and their optimal hatching time with zooplankton prey is favored by natural selection. Traditionally, however, prey abundance (i.e., zooplankton density) has been considered important, whereas prey nutritional composition has been largely neglected in natural settings. High‐quality zooplankton, rich in both essential amino acids (EAAs) and fatty acids (FAs), are required as starting prey to initiate development and fast juvenile growth. Prey quality is dependent on environmental conditions, and, for example, eutrophication and browning are two major factors defining primary producer community structures that will directly determine the nutritional quality of the basal food sources (algae, bacteria, terrestrial matter) for zooplankton. We experimentally tested how eutrophication and browning affect the growth and survival of juvenile rainbow trout (Oncorhynchus mykiss) by changing the quality of basal resources. We fed the fish on herbivorous zooplankton (Daphnia) grown with foods of different nutritional quality (algae, bacteria, terrestrial matter), and used GC‐MS, stable isotope labeling as well as bulk and compound‐specific stable isotope analyses for detecting the effects of different diets on the nutritional status of fish. The content of EAAs and omega‐3 (ω‐3) polyunsaturated FAs (PUFAs) in basal foods and zooplankton decreased in both eutrophication and browning treatments. The decrease in ω‐3 PUFA and especially docosahexaenoic acid (DHA) was reflected to fish juveniles, but they were able to compensate for low availability of EAAs in their food. Therefore, the reduced growth and survival of the juvenile fish was linked to the low availability of DHA. Fish showed very low ability to convert alpha‐linolenic acid (ALA) to DHA. We conclude that eutrophication and browning decrease the availability of the originally phytoplankton‐derived DHA for zooplankton and juvenile fish, suggesting bottom‐up regulation of food web quality.     

UV effects on stoichiometry and PUFAs of Selenastrum capricornutum and their consequences for the grazer Daphnia magna

1. The effect of ultraviolet (UV) radiation (280–400 nm) on fatty acid composition and elemental ratios of carbon (C), nitrogen (N) and phosphorus (P) of a unialgal culture of the chlorophyte Selenastrum capricornutum was investigated. Algae were cultured in the presence or absence of UV radiation and were subsequently fed to Daphnia magna to assess potential effects of UV on zooplankton fatty acid composition, growth and reproduction. 2. Algal growth rate was substantially reduced by UV radiation, probably because of a severe inhibition of photosynthetic efficiency (measured as optimal quantum yield). 3. Algae exposed to UV radiation had a significantly reduced content of 18 : 1 n‐9, while C18 polyunsaturated fatty acids (PUFAs) were higher under UV radiation. These observations point at an increased demand for and synthesis of PUFAs under UV stress. 4. The C : P and N : P ratios showed a remarkable decrease in UV‐exposed cells primarily owing to an increased uptake of P. The nutritional quality in terms of both fatty acid composition and stoichiometry was therefore higher in the UV treatment relative to the control. 5. Despite the UV‐induced changes in nutritional quality of S. capricornutum, no significant effects on D. magna growth or reproduction were detected. The fatty acid composition of Daphnia fed on UV irradiated algae showed a significantly lower content of 18 : 1 n‐9, but no changes in the essential PUFAs.     

Biodiesel production from algal oil using cassava (<Emphasis Type="Italic">Manihot esculenta</Emphasis> Crantz) as feedstock

As a potential source of biomass supplies, cassava (Manihot esculenta Crantz) has been studied for bioethanol production, but not for the production of biodiesel. In this study, we used cassava hydrolysate as an alternative carbon source for the growth of microalgae (Chlorella protothecoides) which accumulated oil in vivo, with high oil content up to 53% by dry mass under a 5-L scale fermentation condition. The oils were extracted and converted into biodiesel by transesterification. The biodiesel obtained consisted of mainly unsaturated fatty acids methyl ester (over 82%), cetane acid methyl ester, linoleic acid methyl ester, and oleic acid methyl ester. This work suggests the feasibility of an alternative choice for producing biodiesel from cassava by microalgae fermentation. We report herewith the optimized condition for the fermentation and for the hydrolysis of cassava as the carbon source.     

Caveolar Fatty Acids and Acylation of Caveolin-1

Purpose

Caveolae are cholesterol and sphingolipids rich subcellular domains on plasma membrane. Caveolae contain a variety of signaling proteins which provide platforms for signaling transduction. In addition to enriched with cholesterol and sphingolipids, caveolae also contain a variety of fatty acids. It has been well-established that acylation of protein plays a pivotal role in subcellular location including targeting to caveolae. However, the fatty acid compositions of caveolae and the type of acylation of caveolar proteins remain largely unknown. In this study, we investigated the fatty acids in caveolae and caveolin-1 bound fatty acids.

Methods

Caveolae were isolated from Chinese hamster ovary (CHO) cells. The caveolar fatty acids were extracted with Folch reagent, methyl esterificated with BF3, and analyzed by gas chromatograph-mass spectrometer (GC/MS). The caveolin-1bound fatty acids were immunoprecipitated by anti-caveolin-1 IgG and analyzed with GC/MS.

Results

In contrast to the whole CHO cell lysate which contained a variety of fatty acids, caveolae mainly contained three types of fatty acids, 0.48 µg palmitic acid, 0.61 µg stearic acid and 0.83 µg oleic acid/caveolae preparation/5×10⁷ cells. Unexpectedly, GC/MS analysis indicated that caveolin-1 was not acylated by myristic acid; instead, it was acylated by palmitic acid and stearic acid.

Conclusion

Caveolae contained a special set of fatty acids, highly enriched with saturated fatty acids, and caveolin-1 was acylated by palmitic acid and stearic acid. The unique fatty acid compositions of caveolae and acylation of caveolin-1 may be important for caveolae formation and for maintaining the function of caveolae.     

Distribution of C22-, C24- and C26-α-Unit-Containing Mycolic Acid Homologues in Mycobacteria

There are three mycolic acid homologues with C₂₂-, C₂₄- and C₂₆-α-units in Mycobacterium. In order to reveal the composition and distribution of these homologues in each subclass and molecular species of mycolic acids and to compare them with the composition of constitutive non-polar fatty acids (free and bound forms), we have separated non-polar fatty acids and each subclass of mycolic acids from 21 mycobacterial species by thin-layer chromatography, and analyzed non-polar fatty acid methyl esters by gas chromatography (GC) and the cleavage products of methyl mycolate by pyrolysis GC. We further performed mass chromatographic analysis of trimethylsilyl (TMS) ether derivatives of mycolic acid methyl esters by monitoring [B-29]⁺ ions (loss of CHO from the α-branched-chain structure of mycolic acids) of m/z 426, 454 and 482 which are attributed to C₂₂-, C₂₄- and C₂₆-α-units of TMS ether derivatives of methyl mycolates, respectively, (Kaneda, K. et al, J. Clin. Microbiol. 24: 1060-1070, 1986). By pyrolysis GC, C_22:0, C_24:0 and C_26:0 fatty acid methyl esters generated by the C₂-C₃ cleavage of C₂₂-, C₂₄- and C₂₆-α-unit-containing mycolic acid methyl esters, respectively, were detected. Their proportion was almost the same among subclasses of mycolic acids in every Mycobacterium and also similar to the proportion of constitutive non-polar C_22:0, C_24:0 and C_26:0 fatty acids. By mass chromatography, the composition and distribution of C₂₂- and C₂₄-α-unit-containing homologues were revealed to be similar between α- and α'-mycolic acids in every Mycobacterium. We further analyzed in detail M. vaccae and demonstrated that the mass chromatogram of C₂₂-α-unit-containing homologue was analogous in shape to that of the C₂₄-α-unit-containing one, with the latter mass chromatogram being up-shifted from the former by two carbon numbers, in every subclass of α-, α'-, keto and dicarboxy mycolic acids. The present study suggests that the compositions of three homologues of both mycolic acids and constitutive non-polar fatty acids, which are characteristic to each mycobacterial species, may reflect the proportion of the amount of free C_22:0, C_24:0 and C_26:0 fatty acids synthesized in the cell. It is further demonstrated that intermolecular condensation of two fatty acids which become α- and β-units of mycolic acids will occur independently of the carbon chain length or kinds of polar moieties of fatty acids.     

Production of 7,10-dihydroxy-8(<Emphasis Type="Italic">E</Emphasis>)-octadecenoic acid from olive oil by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> PR3

Microbial modification of naturally occurring materials is one of the efficient ways to add new values to them. Hydroxylation of free unsaturated fatty acids by microorganism is a good example of those modifications. Among microbial strains studied for that purpose, a new bacterial isolate Pseudomonas aeruginosa PR3 has been well studied to produce several hydroxy fatty acids from different unsaturated fatty acids. Of those hydroxy fatty acids, 7,10-dihydroxy-8(E)-octadecenoic acid (DOD) was efficiently produced from oleic acid by strain PR3. However, it was highly plausible to use vegetable oil containing oleic acid rather than free oleic acid as a substrate for DOD production by strain PR3. In this study, we firstly tried to use olive oil containing high content of oleic acid as a substrate for DOD production. DOD production from olive oil was confirmed by structural determination with GC, TLC, and GC/MS analysis. DOD production yield from olive oil was 53.5%. Several important environmental factors were also tested. Galactose and glutamine were optimal carbon and nitrogen sources, and magnesium ion was critically required for DOD production from olive oil. Results from this study demonstrated that natural vegetable oils containing oleic acid could be used as efficient substrate for the production of DOD by strain PR3.     

Successful high‐level accumulation of fish oil omega‐3 long‐chain polyunsaturated fatty acids in a transgenic oilseed crop

Omega‐3 (also called n‐3) long‐chain polyunsaturated fatty acids (≥C20; LC‐PUFAs) are of considerable interest, based on clear evidence of dietary health benefits and the concurrent decline of global sources (fish oils). Generating alternative transgenic plant sources of omega‐3 LC‐PUFAs, i.e. eicosapentaenoic acid (20:5 n‐3, EPA) and docosahexaenoic acid (22:6 n‐3, DHA) has previously proved problematic. Here we describe a set of heterologous genes capable of efficiently directing synthesis of these fatty acids in the seed oil of the crop Camelina sativa, while simultaneously avoiding accumulation of undesirable intermediate fatty acids. We describe two iterations: RRes_EPA in which seeds contain EPA levels of up to 31% (mean 24%), and RRes_DHA, in which seeds accumulate up to 12% EPA and 14% DHA (mean 11% EPA and 8% DHA). These omega‐3 LC‐PUFA levels are equivalent to those in fish oils, and represent a sustainable, terrestrial source of these fatty acids. We also describe the distribution of these non‐native fatty acids within C. sativa seed lipids, and consider these data in the context of our current understanding of acyl exchange during seed oil synthesis.