Biocatalytic synthesis of poly(ε‐caprolactone) using modified lipase in ionic liquid media

Ionic liquids have been used as exceptional nonaqueous reaction media for enzymatic transformation. The ring‐opening polymerization of ε‐caprolactone catalyzed by Novozyme‐435 lipase was successfully conducted in 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([Bmim]PF₆) ionic liquid. ¹H‐NMR and MALDI‐TOF analyses of poly(ε‐caprolactone) (PCL) formed by Novozyme‐435 lipase‐catalyzed reaction revealed an asymmetric telechelic α‐hydroxy‐ω‐carboxylic acid end group. The effects of enzyme concentration, temperature, reaction time, and water activities on monomer conversion and M_n were systematically evaluated. Through the optimization of reaction conditions, PCL was produced in 85% monomer conversion, with an M_n of 5942, in [Bmim]PF₆ at 60°C for 48 h. DSC results demonstrated that high‐molecular‐weight PCL exhibited an excellent thermal property. SEM results showed that PCL had a clear spherulites structure, which could provide a large surface area for cell adhesion. These results showed that [Bmim]PF₆ ionic liquid was suitable for the biocatalytic synthesis of PCL using Novozyme‐435 lipase, and could be used as alternative environmentally friendly media to replace the traditional organic solvents.     

Enzyme-catalyzed synthesis of sugar-containing monomers and linear polymers

Commercially available proteases and lipases were screened for their ability to acylate regioselectively sucrose and trehalose with divinyladipic acid ester. Opticlean M375 (subtilisin from Bacillus licheniformis) was observed to form sucrose 1'-O-adipate and trehalose 6-O-adipate in anhydrous pyridine. Novozym-435 (lipase B from Candida antarctica) catalyzed the synthesis of sucrose 6, 6'-O-divinyladipate and trehalose 6, 6'-O-divinyladipate in acetone. These diesters were then employed as monomers in polycondensation reactions with various diols (aliphatic and aromatic) catalyzed by Novozym-435 in organic solvents to yield linear polyesters with M(w)'s up to 22,000 Da. Spectroscopic analysis confirmed that only the vinyl end groups of sugar esters reacted in the enzymatic polymerization with the diol, and not the internal sugar-adipate linkages. The two-step enzymatic strategy to yield sugar-based polyesters, which is the first report of its kind, results in higher molecular weights and faster reaction times than one-step enzymatic polyester synthesis.     

Polymerization of Horseradish Peroxidase by a Laccase‐Catalyzed Tyrosine Coupling Reaction

The polymerization of proteins can create newly active and large bio‐macromolecular assemblies that exhibit unique functionalities depending on the properties of the building block proteins and the protein units in polymers. Herein, the first enzymatic polymerization of horseradish peroxidase (HRP) is reported. Recombinant HRPs fused with a tyrosine‐tag (Y‐tag) through a flexible linker at the N‐ and/or C‐termini are expressed in silkworm, Bombyx mori. Trametes sp. laccase (TL) is used to activate the tyrosine of Y‐tagged HRPs with molecular O₂ to form a tyrosyl‐free radical, which initiates the tyrosine coupling reaction between the HRP units. A covalent dityrosine linkage is also formed through a HRP‐catalyzed self‐crosslinking reaction in the presence of H₂O₂. The addition of H₂O₂ in the self‐polymerization of Y‐tagged HRPs results in lower activity of the HRP polymers, whereas TL provides site‐selectivity, mild reaction conditions and maintains the activity of the polymeric products. The cocrosslinking of Y‐tagged HRPs and HRP‐protein G (Y‐HRP‐pG) units catalyzed by TL shows a higher signal in enzyme‐linked immunosorbent assay (ELISA) than the genetically pG‐fused HRP, Y‐HRP‐pG, and its polymers. This new enzymatic polymerization of HRP promises to provide highly active and functionalized polymers for biomedical applications and diagnostics probes.     

Solvent selection and optimization of α‐chymotrypsin‐catalyzed synthesis of N‐Ac‐Phe‐Tyr‐NH2 using mixture design and response surface methodology

A peptide, N‐Ac‐Phe‐Tyr‐NH₂, with angiotensin I‐converting enzyme (ACE) inhibitor activity was synthesized by an α‐chymotrypsin‐catalyzed condensation reaction of N‐acetyl phenylalanine ethyl ester (N‐Ac‐Phe‐OEt) and tyrosinamide (Tyr‐NH₂). Three kinds of solvents: a Tris–HCl buffer (80 mM, pH 9.0), dimethylsulfoxide (DMSO), and acetonitrile were employed in this study. The optimum reaction solvent component was determined by simplex centroid mixture design. The synthesis efficiency was enhanced in an organic‐aqueous solvent (Tris‐HCl buffer: DMSO: acetonitrile = 2:1:1) in which 73.55% of the yield of N‐Ac‐Phe‐Tyr‐NH₂ could be achieved. Furthermore, the effect of reaction parameters on the yield was evaluated by response surface methodology (RSM) using a central composite rotatable design (CCRD). Based on a ridge max analysis, the optimum condition for this peptide synthesis included a reaction time of 7.4 min, a reaction temperature of 28.1°C, an enzyme activity of 98.9 U, and a substrate molar ratio (Phe:Tyr) of 1:2.8. The predicted and the actual (experimental) yields were 87.6 and 85.5%, respectively. The experimental design and RSM performed well in the optimization of synthesis of N‐Ac‐Phe‐Tyr‐NH₂, so it is expected to be an effective method for obtaining a good yield of enzymatic peptide. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

1,10‐Phenanthroline–H2O2–KSCN–CuSO4–NaOH oscillating chemiluminescence system

In this paper, oscillating chemiluminescence (CL), 1,10‐phenanthroline H₂O₂–KSCN–CuSO₄–NaOH system, was studied in a batch reactor. The system described is a novel, slowly damped oscillating CL system, generated by coupling the well‐known Epstein–Orban, H₂O₂–KSCN–CuSO₄–NaOH chemical oscillator reaction with the CL reaction involving the oxidation of 1,10‐phenanthroline by hydrogen peroxide, catalyzed by copper(II) in alkaline medium. In this system, the CL reaction acts as a detector or indicator system of the far‐from‐equilibrium dynamic system. Narrow and slightly asymmetric light pulses of 1.2 s half‐width are emitted at 440 nm with an emitted light time of 200–1000 s, induction period of 3.5–357 s and oscillation period of 28–304 s depending on the reagent concentrations. In this report the effect of the concentration variation of components involved in the oscillating CL system on the induction period, the oscillation period and amplitude was investigated and the parameters were plotted with respect to reagent concentrations. Copper concentration showed a significant effect on the oscillation period. The possible mechanism for the oscillating CL reaction was also discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Enzymatic synthesis of chiral amino‐alcohols by coupling transketolase and transaminase‐catalyzed reactions in a cascading continuous‐flow microreactor system

Rapid biocatalytic process development and intensification continues to be challenging with currently available methods. Chiral amino‐alcohols are of particular interest as they represent key industrial synthons for the production of complex molecules and optically pure pharmaceuticals. (2S,3R)‐2‐amino‐1,3,4‐butanetriol (ABT), a building block for the synthesis of protease inhibitors and detoxifying agents, can be synthesized from simple, non‐chiral starting materials, by coupling a transketolase‐ and a transaminase‐catalyzed reaction. However, until today, full conversion has not been shown and, typically, long reaction times are reported, making process modifications and improvement challenging. In this contribution, we present a novel microreactor‐based approach based on free enzymes, and we report for the first time full conversion of ABT in a coupled enzyme cascade for both batch and continuous‐flow systems. Using the compartmentalization of the reactions afforded by the microreactor cascade, we overcame inhibitory effects, increased the activity per unit volume, and optimized individual reaction conditions. The transketolase‐catalyzed reaction was completed in under 10 min with a volumetric activity of 3.25 U ml^?1. Following optimization of the transaminase‐catalyzed reaction, a volumetric activity of 10.8 U ml^?1 was attained which led to full conversion of the coupled reaction in 2 hr. The presented approach illustrates how continuous‐flow microreactors can be applied for the design and optimization of biocatalytic processes.

     

Kinetic Modeling of Amino Acid Oxidation Catalyzed by a New D‐Amino Acid Oxidase from Arthrobacter protophormiae

Amino acid oxidases, which enantiospecifically catalyze the oxidative deamination of either D‐ or L‐amino acids, belong to the class of oxidoreductases functioning with a tightly bound cofactor. This cofactor favors industrial applications of D‐amino acid oxidases (D‐AAO). Hence, the enzyme is very important for the industrial application in the purification and determination of certain amino acids. In developing the enzyme‐catalyzed reaction for large‐scale production, modeling of the reaction kinetics plays an important role. Therefore, the subject of this study was the kinetics of the oxidative deamination, a very complex reaction system, which is catalyzed by D‐AAO from Arthrobacter protophormiae using its natural substrate D‐methionine and the aromatic amino acid 3,4‐dihydroxyphenyl‐D‐alanine (D‐DOPA). The kinetic parameters determined by the measurement of the initial rate and nonlinear regression were verified in batch reactor experiments by comparing calculated and experimental concentration‐time curves. It was found that the enzyme is highly specific towards D‐methionine (K_m = 0.24 mM) and not as specific to D‐DOPA as a substrate (K_m = 9.33 mM). The enzyme activity towards D‐methionine ( = 3.01 U/mL) was approx. seven times higher than towards D‐DOPA ( = 20.01 U/mL). The enzyme exhibited no activity towards L‐methionine and L‐DOPA. Batch and repetitive batch experiments were performed with both substrates in the presence and in the absence of catalase for hydrogen peroxide decomposition. Their comparison made it possible to conclude that hydrogen peroxide has no negative influence on the enzyme activity.     

Rat Stem-Cell Leukemia Gene Expression Increased during Testis Maturation

Histamine oxidase (EC class 1.4.3) was found in cells of Arthrobacter globiformis IFO 12137 (ATCC 8010) grown on histamine. The enzyme purified to a specific activity of 9.4units/mg had a purity of at least 80%. The enzyme oxidized histamine with concomitant formation of H₂O₂. Phenylethylamine, dopamine, aromatic monoamines, and aliphatic mono- and diamines were oxidized at lower rates. Cu²⁺-chelators inhibited the enzyme, indicating that the enzyme is Cu²⁺-dependent. Carbonyl-blocking reagents also inhibited the enzyme. The enzyme catalyzed the Nitro Blue Tetrazolium/glycinate reaction, which is characteristically catalyzed by quinones and quinoproteins. These results strongly suggest that the enzyme contains a quinonoid cofactor.     

S′-subsite mapping of polyethyelene glycol-modified α-chymotrypsin and α-chymotrypsin: a comparative study

Nucleophile specificities of polyethylene glycol-modified α-chymotrypsin and the native enzyme were investigated via acyl transfer reactions using Ac-Tyr-OEt as acyl donor and a large series of peptides and amino-acid amides as nucleophiles. In acyl transfer reactions with amino-acid amines both enzymes prefer basic and bulky amino-acid residues. However, peptides with bulky aliphatic or aromatic residues in P′₁ position were very poor nucleophiles for both enzymes. Surprisingly, peptides having bulky aliphatic or aromatic residues in P′₂ were preferred by the modified enzyme and were apparently more efficient nucleophiles for both enzymes than those with such residues in P′₁. Generally, peptides with a longer chain were weaker nucleophiles in the reactions catalyzed by polyethylene glycol-modified enzyme. In the series of peptides containing a positively charged amino-acid residue in various locations, the order of nucleophilic efficiency is with this location being: P′₁ > P′₃ >P′₂; this is valid for both enzymes.     

Synthesis of 8‐Substituted 2′‐Deoxyisoguanosines via Unprotected 8‐Brominated 2‐Amino‐2′‐deoxyadenosine

A variety of applications of 8‐alkynylated nucleosides has prompted the synthesis of new purine analogues. Bromination of unprotected 2‐amino‐2′‐deoxyadenosine with Br₂/AcOH/AcONa gives 2‐amino‐8‐bromo‐2′‐deoxyadenosine (87%). The brominated derivative is converted to 8‐alkynylated 2‐amino‐2′‐deoxyadenosines by palladium‐catalyzed Sonogashira cross‐coupling reaction via microwave assistance (81 – 95%). The resulting compounds are further transformed to 8‐alkynylated 2′‐deoxyisoguanosines (52 – 70%). The physical properties of new compounds are investigated.     

Monooxygenation of aromatic compounds by flavin‐dependent monooxygenases

Many flavoenzymes catalyze hydroxylation of aromatic compounds especially phenolic compounds have been isolated and characterized. These enzymes can be classified as either single‐component or two‐component flavin‐dependent hydroxylases (monooxygenases). The hydroxylation reactions catalyzed by the enzymes in this group are useful for modifying the biological properties of phenolic compounds. This review aims to provide an in‐depth discussion of the current mechanistic understanding of representative flavin‐dependent monooxygenases including 3‐hydroxy‐benzoate 4‐hydroxylase (PHBH, a single‐component hydroxylase), 3‐hydroxyphenylacetate 4‐hydroxylase (HPAH, a two‐component hydroxylase), and other monooxygenases which catalyze reactions in addition to hydroxylation, including 2‐methyl‐3‐hydroxypyridine‐5‐carboxylate oxygenase (MHPCO, a single‐component enzyme that catalyzes aromatic‐ring cleavage), and HadA monooxygenase (a two‐component enzyme that catalyzes additional group elimination reaction). These enzymes have different unique structural features which dictate their reactivity toward various substrates and influence their ability to stabilize flavin intermediates such as C4a‐hydroperoxyflavin. Understanding the key catalytic residues and the active site environments important for governing enzyme reactivity will undoubtedly facilitate future work in enzyme engineering or enzyme redesign for the development of biocatalytic methods for the synthesis of valuable compounds.     

Bioreaction Engineering Leading to Efficient Synthesis of L‐Glyceraldehyd‐3‐Phosphate

Enantiopure L‐glyceraldehyde‐3‐phosphate (L‐GAP) is a useful building block in natural biological and synthetic processes. A biocatalytic process using glycerol kinase from Cellulomonas sp. (EC 2.7.1.30) catalyzed phosphorylation of L‐glyceraldehyde (L‐GA) by ATP is used for the synthesis of L‐GAP. L‐GAP has a half‐life of 6.86 h under reaction conditions. The activity of this enzyme depends on the Mg²⁺ to ATP molar ratio showing maximum activity at the optimum molar ratio of 0.7. A kinetic model is developed and validated showing a 2D correlation of 99.9% between experimental and numerical data matrices. The enzyme exhibits inhibition by ADP, AMP, methylglyoxal and Ca²⁺, but not by L‐GAP and inorganic orthophosphate. Moreover, equal amount of Ca²⁺ exerts a different degree of inhibition relative to the activity without the addition of Ca²⁺ depending on the Mg²⁺ to ATP molar ratio. If the Mg²⁺ to ATP molar ratio is set to be at the optimum value or less, inorganic hexametaphosphate (PPi6) suppresses the enzyme activity; otherwise PPi6 enhances the enzyme activity. Based on reaction engineering parameters such as conversion, selectivity and specific productivity, evaluation of different reactor types reveals that batchwise operation via stirred‐tank reactor is the most efficient process for the synthesis of L‐GAP.     

Biochemical characterization of an alcohol dehydrogenase from Ralstonia sp.

Stereoselective reduction towards pharmaceutically potent products with multi‐chiral centers is an ongoing hot topic, but up to now catalysts for reductions of bulky aromatic substrates are rare. The NADPH‐dependent alcohol dehydrogenase from Ralstonia sp. (RADH) is an exception as it prefers sterically demanding substrates. Recent studies with this enzyme indicated outstanding potential for the reduction of various alpha‐hydroxy ketones, but were performed with crude cell extract, which hampered its detailed characterization. We have established a procedure for the purification and storage of RADH and found a significantly stabilizing effect by addition of CaCl₂. Detailed analysis of the pH‐dependent activity and stability yielded a broad pH‐optimum (pH 6–9.5) for the reduction reaction and a sharp optimum of pH 10–11.5 for the oxidation reaction. The enzyme exhibits highest stability at pH 5.5–8 and 8–15°C; nevertheless, biotransformations can also be carried out at 25°C (half‐life 80 h). Under optimized reaction parameters a thorough study of the substrate range of RADH including the reduction of different aldehydes and ketones and the oxidation of a broad range of alcohols was conducted. In contrast to most other known alcohol dehydrogenases, RADH clearly prefers aromatic and cyclic aliphatic compounds, which makes this enzyme unique for conversion of space demanding substrates. Further, reductions are catalyzed with extremely high stereoselectivity (>99% enantio‐ and diastereomeric excess). In order to identify appropriate substrate and cofactor concentrations for biotransformations, kinetic parameters were determined for NADP(H) and selected substrates. Among these, we studied the reduction of both enantiomers of 2‐hydroxypropiophenone in more detail. Biotechnol. Bioeng. 2013; 110: 1838–1848. © 2013 Wiley Periodicals, Inc.     

Long‐term chemiluminescence signal is produced in the course of luminol oxidation catalyzed by enhancer‐independent peroxidase purified from Jatropha curcas leaves

Isoenzyme c of horseradish peroxidase (HRP‐C) is widely used in enzyme immunoassay combined with chemiluminescence (CL) detection. For this application, HRP‐C activity measurement is usually based on luminol oxidation in the presence of hydrogen peroxide (H₂O₂). However, this catalysis reaction was enhancer dependent. In this study, we demonstrated that Jatropha curcas peroxidase (JcGP1) showed high efficiency in catalyzing luminol oxidation in the presence of H₂O₂. Compared with HRP‐C, the JcGP1‐induced reaction was enhancer independent, which made the enzyme‐linked immunosorbent assay (ELISA) simpler. In addition, the JcGP1 catalyzed reaction showed a long‐term stable CL signal. We optimized the conditions for JcGP1 catalysis and determined the favorable conditions as follows: 50 mM Tris buffer (pH 8.2) containing 10 mM H₂O₂, 14 mM luminol and 0.75 M NaCl. The optimum catalysis temperature was 30°C. The detection limit of JcGP1 under optimum condition was 0.2 pM. Long‐term stable CL signal combined with enhancer‐independent property indicated that JcGP1 might be a valuable candidate peroxidase for clinical diagnosis and enzyme immunoassay with CL detection. Copyright © 2014 John Wiley & Sons, Ltd.     

Side‐chain hydrophobicity and the stability of Aβ16–22 aggregates

Recent mutagenesis studies using the hydrophobic segment of Aβ suggest that aromatic π‐stacking interactions may not be critical for fibril formation. We have tested this conjecture by probing the effect of Leu, Ile, and Ala mutation of the aromatic Phe residues at positions 19 and 20, on the double‐layer hexametric chains of Aβ fragment Aβ_16–22 using explicit solvent all‐atom molecular dynamics. As these simulations rely on the accuracy of the utilized force fields, we first evaluated the dynamic and stability dependence on various force fields of small amyloid aggregates. These initial investigations led us to choose AMBER99SB‐ILDN as force field in multiple long molecular dynamics simulations of 100 ns that probe the stability of the wild‐type and mutants oligomers. Single‐point and double‐point mutants confirm that size and hydrophobicity are key for the aggregation and stability of the hydrophobic core region (Aβ_16–22). This suggests as a venue for designing Aβ aggregation inhibitors the substitution of residues (especially, Phe 19 and 20) in the hydrophobic region (Aβ_16–22) with natural and non‐natural amino acids of similar size and hydrophobicity.     

Chemiluminescence of off‐line and on‐line gold nanoparticle‐catalyzed luminol system in the presence of flavonoid

It was found that flavonoids could remarkably inhibit the chemiluminescence (CL) intensity of an off‐line gold nanoparticle (AuNP)‐catalyzed luminol–H₂O₂ CL system. By contrast, flavonoids enhanced the CL intensity of an on‐line AuNP‐catalyzed luminol–H₂O₂ CL system. In the off‐line system, the AuNPs were prepared beforehand, whereas in the on‐line system, AuNPs were produced by on‐line mixing of luminol prepared in a buffer solution of NaHCO₃ ? Na₂CO₃ and HAuCl₄ with no need for the preliminary preparation of AuNPs. The on‐line system had prominent advantages over the off‐line system, namely a lowering of the background noise and improvements in the stability of the CL system. The results show that differences in the signal suppression effect of flavonoids on the off‐line AuNP‐catalyzed CL system are influenced by the combined action of a free radical scavenging effect and occupy‐sites function; the latter was proved to be predominant using controlled experiments. Enhancement of the on‐line system was ascribed to the presence of flavonoids promoting the on‐line formation of AuNPs, which better catalyzed the luminol–H₂O₂ CL reaction, and the enhancement activity of the six flavonoids increased with the increase in reducibility. This work broadens the scope of practical applications of an AuNP‐catalyzed CL system.     

Fed‐batch synthesis of galacto‐oligosaccharides with Aspergillus oryzae β‐galactosidase using optimal control strategy

Fed‐batch synthesis of galacto‐oligosaccharides (GOS) from lactose with β‐galactosidase from Aspergillus oryzae was evaluated experimentally and reaction yield was maximized via optimal control technique. The optimal lactose and enzyme feed flow rate profiles were determined using a model for GOS synthesis previously reported by the authors. Experimentally it was found that fed‐batch synthesis allowed an increase on the maximum total GOS concentration from 115 (batch synthesis) to 218 g L^?1 as consequence of the increase in total sugars concentration from 40 to 58% w/w. Such high concentration of total sugars was not attainable in batch operation because of the low solubility of lactose at the reaction temperature (40°C). Simulations predicted a GOS yield of 32.5 g g^?1 in fed‐batch synthesis under optimal conditions, while experimentally the same yield as in batch synthesis was obtained (28 g g^?1). Besides, an enrichment of total oligosaccharides in GOS with a high polymerization degree (GOS‐5 and GOS‐6) was observed in the fed‐batch synthesis. Experimental profiles for all sugars were similar to the ones predicted by simulation, which supports the use of this methodology for the optimization of GOS synthesis. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 30:59–67, 2014     

Cytochrome P450‐catalyzed O‐dealkylation coupled with photochemical NADPH regeneration

Cytochrome P450 monooxygenases are multifunctional enzymes with potential applications in chemoenzymatic synthesis of complex chemicals as well as in studies of metabolism and xenobiotics. Widespread application of cytochrome P450s, however, is encumbered by the critical need for redox equivalents in their catalytic function. To overcome this limitation, we studied visible light‐driven regeneration of NADPH for P450‐catalyzed O‐dealkylation reaction; we used eosin Y as a photosensitizing dye, triethanolamine as an electron donor, and [Cp*Rh(bpy)H₂O] as an electron mediator. We analyzed catalytic activity of cell‐free synthesized P450 BM3 monooxygenase variant (Y51F/F87A, BM3m2) in the presence of key components for NADPH photoregeneration. The P450‐catalyzed O‐dealkylation reaction sustainably maintained its turnover with the continuous supply of photoregenerated NADPH. Visible light‐driven, non‐enzymatic NADPH regeneration provides a new route for efficient, sustainable utilization of P450 monooxygenases. Biotechnol. Bioeng. 2013; 110: 383–390. © 2012 Wiley Periodicals, Inc.     

A general method for preparation of N‐Boc‐protected or N‐Fmoc‐protected α,β‐didehydropeptide building blocks and their use in the solid‐phase peptide synthesis

N‐(tert‐butyloxycarbonyl) or N‐(9‐fluorenylmethoxycarbonyl) dipeptides with C‐terminal (Z)‐α,β‐didehydrophenylalanine (?^ZPhe), (Z)‐α,β‐didehydrotyrosine (?^ZTyr), (Z)‐α,β‐didehydrotryptophan (?^ZTrp), (Z)‐α,β‐didehydromethionine (?^ZMet), (Z)‐α,β‐didehydroleucine (?^ZLeu), and (Z/E)‐α,β‐didehydroisoleucine (?^Z/EIle) were synthesised from their saturated analogues via oxidation of intermediate 2,5‐disubstituted‐oxazol‐5‐(4H)‐ones (also known as azlactones) with pyridinium tribromide followed by opening of the produced unsaturated oxazol‐5‐(4H)‐one derivatives in organic‐aqueous solution with a catalytic amount of trifluoroacetic acid or by a basic hydrolysis. In all cases, a very strong preference for Z isomers of α,β‐didehydro‐α‐amino acid residues was observed except of the ΔIle, which was obtained as the equimolar mixture of Z and E isomers. Reasons for the (Z)‐stereoselectivity and the increased stability of the aromatic α,β‐didehydro‐α‐amino acid residue oxazol‐5‐(4H)‐ones over the corresponding aliphatic ones are also discussed. It is the first use of such a procedure to synthesise peptides with the C‐terminal unsaturated residues and a peptide with 2 consecutive ΔPhe residues. This approach is very effective especially in the synthesis of peptides with aliphatic α,β‐didehydro‐α‐amino acid residues that are difficult to obtain by other methods. It allowed the first synthesis of the ?Met residue. It is also more cost‐effective and less laborious than other synthesis protocols. The dipeptide building blocks obtained were used in the solid‐phase synthesis of model peptides on a polystyrene‐based solid support. Peptides containing aromatic α,β‐didehydro‐α‐amino acid residues were obtained with PyBOP or TBTU as a coupling agent with good yields and purities. In the case of aliphatic α,β‐didehydro‐α‐amino acid residues, a good efficiency was achieved only with DPPA as a coupling agent.