A saccharide-based supramolecular hydrogel for cell culture

It is well known that the saccharides forming the intricate sugar coat that surrounds the cells play important biological roles in intercellular communication and cell differentiation. Therefore, it is worthwhile developing saccharide-based hydrogels for cell culture study. In this study, three novel saccharide-based compounds were designed and synthesized. It was found that one of them could form hydrogels efficiently, while the other two precipitated from water. The stability of the resulting hydrogel was tested, and the supramolecular nanofiber with fiber diameters in the range of 80–300 nm was characterized as the structural element by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Fluorescence microscopy revealed that extensive hydrogen bonds between sugar rings assisted the formation of efficient π–π stacking between aromatic naphthalene groups, thus resulting in the formation of a stable hydrogel in aqueous solution. When the gel was applied for mouse embryonic fibroblast (NIH 3T3), human hepatocellular carcinoma (HepG2), AD293 and HeLa cells culture in two dimensional environments, all of them showed a very good adhesion and good proliferation rate on the top of the hydrogel. These results indicates that the biocompatible hydrogel reported here has a potential to be developed into useful materials for in vitro cell culture, drug delivery, and tissue engineering.     

Charge transport through DNA four-way junctions

Long range oxidative damage as a result of charge transport is shown to occur through single crossover junctions assembled from four semi-complementary strands of DNA. When a rhodium complex is tethered to one of the arms of the four-way junction assembly, thereby restricting its intercalation into the π-stack, photo-induced oxidative damage occurs to varying degrees at all guanine doublets in the assembly, though direct strand scission only occurs at the predicted site of intercalation. In studies where the Mg²⁺ concentration was varied, so as to perturb base stacking at the junction, charge transport was found to be enhanced but not to be strongly localized to the arms that preferentially stack on each other. These data suggest that the conformations of four-way junctions can be relatively mobile. Certainly, in four-way junctions charge transport is less discriminate than in the more rigidly stacked DNA double crossover assemblies.     

A simple cell transport device keeps culture alive and functional during shipping

Transporting living complex cellular constructs through the mail while retaining their full viability and functionality is challenging. During this process, cells often suffer from exposure to suboptimal life‐sustaining conditions (e.g. temperature, pH), as well as damage due to shear stress. We have developed a transport device for shipping intact cell/tissue constructs from one facility to another that overcomes these obstacles. Our transport device maintained three different cell lines (Caco2, A549, and HepG2 C3A) individually on transwell membranes with high viability (above 97%) for 48 h under simulated shipping conditions without an incubator. The device was also tested by actual overnight shipping of blood brain barrier constructs consisting of human induced pluripotent brain microvascular endothelial cells and rat astrocytes on transwell membranes to a remote facility (approximately 1200 miles away). The blood brain barrier constructs arrived with high cell viability and were able to regain full barrier integrity after equilibrating in the incubator for 24 h; this was assessed by the presence of continuous tight junction networks and in vivo‐like values for trans‐endothelial electrical resistance (TEER). These results demonstrated that our cell transport device could be a useful tool for long‐distance transport of membrane‐bound cell cultures and functional tissue constructs. Studies that involve various cell and tissue constructs, such as the “Multi‐Organ‐on‐Chip” devices (where multiple microscale tissue constructs are integrated on a single microfluidic device) and studies that involve microenvironments where multiple tissue interactions are of interest, would benefit from the ability to transport or receive these constructs. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1257–1266, 2017     

Development of hydrogels for regenerative engineering

The aim of regenerative engineering is to restore complex tissues and biological systems through convergence in the fields of advanced biomaterials, stem cell science, and developmental biology. Hydrogels are one of the most attractive biomaterials for regenerative engineering, since they can be engineered into tissue mimetic 3D scaffolds to support cell growth due to their similarity to native extracellular matrix. Advanced nano‐ and micro‐technologies have dramatically increased the ability to control properties and functionalities of hydrogel materials by facilitating biomimetic fabrication of more sophisticated compositions and architectures, thus extending our understanding of cell‐matrix interactions at the nanoscale. With this perspective, this review discusses the most commonly used hydrogel materials and their fabrication strategies for regenerative engineering. We highlight the physical, chemical, and functional modulation of hydrogels to design and engineer biomimetic tissues based on recent achievements in nano‐ and micro‐technologies. In addition, current hydrogel‐based regenerative engineering strategies for treating multiple tissues, such as musculoskeletal, nervous and cardiac tissue, are also covered in this review. The interaction of multiple disciplines including materials science, cell biology, and chemistry, will further play an important role in the design of functional hydrogels for the regeneration of complex tissues.     

Evaluation of cellular adhesion and organization in different microporous polymeric scaffolds

The lack of prediction accuracy during drug development and screening risks complications during human trials, such as drug‐induced liver injury (DILI), and has led to a demand for robust, human cell‐based, in vitro assays for drug discovery. Microporous polymer‐based scaffolds offer an alternative to the gold standard flat tissue culture plastic (2D TCPS) and other 3D cell culture platforms as the porous material entraps cells, making it advantageous for automated liquid handlers and high‐throughput screening (HTS). In this study, we optimized the surface treatment, pore size, and choice of scaffold material with respect to cellular adhesion, tissue organization, and expression of complex physiologically relevant (CPR) outcomes such as the presence of bile canaliculi‐like structures. Poly‐l‐ lysine and fibronectin (FN) coatings have been shown to encourage cell attachment to the underlying substrate. Treatment of the scaffold surface with NaOH followed with a coating of FN improved cell attachment and penetration into pores. Of the two pore sizes we investigated (A: 104 ± 4 μm; B: 175 ± 6 μm), the larger pore size better promoted cell penetration while limiting tissue growth from reaching the hypoxia threshold. Finally, polystyrene (PS) proved to be conducive to cell growth, penetration into the scaffold, and yielded CPR outcomes while being a cost‐effective choice for HTS applications. These observations provide a foundation for optimizing microporous polymer‐based scaffolds suitable for drug discovery. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:505–514, 2018     

Fabrication of functional three-dimensional tissues by stacking cell sheets in vitro

The fabrication of 3D tissues retaining the original functions of tissues/organs in vitro is crucial for optimal tissue engineering and regenerative medicine. The fabrication of 3D tissues also contributes to the establishment of in vitro tissue/organ models for drug screening. Our laboratory has developed a fabrication system for functional 3D tissues by stacking cell sheets of confluent cultured cells detached from a temperature-responsive culture dish. Here we describe the protocols for the fabrication of 3D tissues by cell sheet engineering. Three-dimensional cardiac tissues fabricated by stacking cardiac cell sheets pulsate spontaneously, synchronously and macroscopically. Via this protocol, it is also possible to fabricate other tissues, such as 3D tissue including capillary-like prevascular networks, from endothelial cells sandwiched between layered cell sheets. Cell sheet stacking technology promises to provide in vitro tissue/organ models and more effective therapies for curing tissue/organ failures.     

Stacked stem cell sheets enhance cell-matrix interactions

Cell sheet engineering has enabled the production of confluent cell sheets stacked together for use as a cardiac patch to increase cell survival rate and engraftment after transplantation, thereby providing a promising strategy for high density stem cell delivery for cardiac repair. One key challenge in using cell sheet technology is the difficulty of cell sheet handling due to its weak mechanical properties. A single-layer cell sheet is generally very fragile and tends to break or clump during harvest. Effective transfer and stacking methods are needed to move cell sheet technology into widespread clinical applications. In this study, we developed a simple and effective micropipette based method to aid cell sheet transfer and stacking. The cell viability after transfer was tested and multi-layer stem cell sheets were fabricated using the developed method. Furthermore, we examined the interactions between stacked stem cell sheets and fibrin matrix. Our results have shown that the preserved ECM associated with the detached cell sheet greatly facilitates its adherence to fibrin matrix and enhances the cell sheet-matrix interactions. Accelerated fibrin degradation caused by attached cell sheets was also observed.     

Stacked stem cell sheets enhance cell-matrix interactions

Cell sheet engineering has enabled the production of confluent cell sheets stacked together for use as a cardiac patch to increase cell survival rate and engraftment after transplantation, thereby providing a promising strategy for high density stem cell delivery for cardiac repair. One key challenge in using cell sheet technology is the difficulty of cell sheet handling due to its weak mechanical properties. A single-layer cell sheet is generally very fragile and tends to break or clump during harvest. Effective transfer and stacking methods are needed to move cell sheet technology into widespread clinical applications. In this study, we developed a simple and effective micropipette based method to aid cell sheet transfer and stacking. The cell viability after transfer was tested and multi-layer stem cell sheets were fabricated using the developed method. Furthermore, we examined the interactions between stacked stem cell sheets and fibrin matrix. Our results have shown that the preserved ECM associated with the detached cell sheet greatly facilitates its adherence to fibrin matrix and enhances the cell sheet-matrix interactions. Accelerated fibrin degradation caused by attached cell sheets was also observed.     

Dynamic culture of droplet‐confined cell arrays

Responding to the need of creating an accurate and controlled microenvironment surrounding the cell while meeting the requirements for biological processes or pharmacological screening tests, we aimed at designing and developing a microscaled culture system suitable for analyzing the synergic effects of extracellular matrix proteins and soluble environments on cell phenotype in a high‐throughput fashion. We produced cell arrays deposing micrometer‐scale protein islands on hydrogels using a robotic DNA microarrayer, constrained the culture media in a droplet‐like volume and developed a suitable perfusion system. The droplet‐confined cell arrays were used either with conventional culture methods (batch operating system) or with automated stable and constant perfusion (steady‐state operating system). Mathematical modeling assisted the experimental design and assessed efficient mass transport and proper fluidodynamic regimes. Cells cultured on arrayed islands (500 μm diameter) maintained the correct phenotype both after static and perfused conditions, confirmed by immunostaining and gene expression analyses through total RNA extraction. The mathematical model, validated using a particle tracking experiment, predicted the constant value of velocities over the cell arrays (less than 10% variation) ensuring the same mass transport regime. BrdU analysis on an average of 96 cell spots for each experimental condition showed uniform expression inside each cell island and low variability in the data (average of 13%). Perfused arrays showed longer doubling times when compared with static cultures. In addition, perfused cultures showed a reduced variability in the collected data, allowing to detect statistically significant differences in cell behavior depending on the spotted ECM protein. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Hydrogel‐based three‐dimensional cell culture for organ‐on‐a‐chip applications

Recent studies have reported that three‐dimensionally cultured cells have more physiologically relevant functions than two‐dimensionally cultured cells. Cells are three‐dimensionally surrounded by the extracellular matrix (ECM) in complex in vivo microenvironments and interact with the ECM and neighboring cells. Therefore, replicating the ECM environment is key to the successful cell culture models. Various natural and synthetic hydrogels have been used to mimic ECM environments based on their physical, chemical, and biological characteristics, such as biocompatibility, biodegradability, and biochemical functional groups. Because of these characteristics, hydrogels have been combined with microtechnologies and used in organ‐on‐a‐chip applications to more closely recapitulate the in vivo microenvironment. Therefore, appropriate hydrogels should be selected depending on the cell types and applications. The porosity of the selected hydrogel should be controlled to facilitate the movement of nutrients and oxygen. In this review, we describe various types of hydrogels, external stimulation‐based gelation of hydrogels, and control of their porosity. Then, we introduce applications of hydrogels for organ‐on‐a‐chip. Last, we also discuss the challenges of hydrogel‐based three‐dimensional cell culture techniques and propose future directions. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:580–589, 2017     

A versatile modular bioreactor platform for Tissue Engineering

Tissue Engineering (TE) bears potential to overcome the persistent shortage of donor organs in transplantation medicine. Additionally, TE products are applied as human test systems in pharmaceutical research to close the gap between animal testing and the administration of drugs to human subjects in clinical trials. However, generating a tissue requires complex culture conditions provided by bioreactors. Currently, the translation of TE technologies into clinical and industrial applications is limited due to a wide range of different tissue‐specific, non‐disposable bioreactor systems. To ensure a high level of standardization, a suitable cost‐effectiveness, and a safe graft production, a generic modular bioreactor platform was developed. Functional modules provide robust control of culture processes, e.g. medium transport, gas exchange, heating, or trapping of floating air bubbles. Characterization revealed improved performance of the modules in comparison to traditional cell culture equipment such as incubators, or peristaltic pumps. By combining the modules, a broad range of culture conditions can be achieved. The novel bioreactor platform allows using disposable components and facilitates tissue culture in closed fluidic systems. By sustaining native carotid arteries, engineering a blood vessel, and generating intestinal tissue models according to a previously published protocol the feasibility and performance of the bioreactor platform was demonstrated.     

Multizone paper platform for 3D cell cultures

In vitro 3D culture is an important model for tissues in vivo. Cells in different locations of 3D tissues are physiologically different, because they are exposed to different concentrations of oxygen, nutrients, and signaling molecules, and to other environmental factors (temperature, mechanical stress, etc). The majority of high-throughput assays based on 3D cultures, however, can only detect the average behavior of cells in the whole 3D construct. Isolation of cells from specific regions of 3D cultures is possible, but relies on low-throughput techniques such as tissue sectioning and micromanipulation. Based on a procedure reported previously ("cells-in-gels-in-paper" or CiGiP), this paper describes a simple method for culture of arrays of thin planar sections of tissues, either alone or stacked to create more complex 3D tissue structures. This procedure starts with sheets of paper patterned with hydrophobic regions that form 96 hydrophilic zones. Serial spotting of cells suspended in extracellular matrix (ECM) gel onto the patterned paper creates an array of 200 micron-thick slabs of ECM gel (supported mechanically by cellulose fibers) containing cells. Stacking the sheets with zones aligned on top of one another assembles 96 3D multilayer constructs. De-stacking the layers of the 3D culture, by peeling apart the sheets of paper, "sections" all 96 cultures at once. It is, thus, simple to isolate 200-micron-thick cell-containing slabs from each 3D culture in the 96-zone array. Because the 3D cultures are assembled from multiple layers, the number of cells plated initially in each layer determines the spatial distribution of cells in the stacked 3D cultures. This capability made it possible to compare the growth of 3D tumor models of different spatial composition, and to examine the migration of cells in these structures.     

The effects of cations and trypsin on extraction of chlorophyll-protein complexes by octyl glucoside

The extraction of chlorophyll-protein (CP) complexes from thylakoids by the detergent octyl glucoside is strongly affected by pretreatment of the thylakoids with trypsin or cations. In these experiments, washed thylakoids were incubated in the presence of 0.5 μm to 5 mm Mg²⁺, pelleted, and extracted with octyl glucoside (30 mm). Increasing amounts of Mg²⁺ depressed extractability of all CP complexes, but especially the chlorophyll a + b-containing light-harvesting complex (LHC). This cation effect is observed with other cations which promote thylakoid stacking (5 mm Mn²⁺ or Ca²⁺, 50 mm Na⁺). However, the effect is not merely due to stacking, since low concentrations of Mg²⁺ (0.5 μmto 0.5 mm) have a marked effect on extractability but have no effect on light scattering (OD 550 nm), an indicator of stacking. Furthermore, trypsin treatment of thylakoids stacked with 5 mm Mg²⁺ caused a significant reversal of stacking, but had little effect on extractability. Trypsin treatment of unstacked membranes resulted in increased extractability of all CP complexes, but especially of the LHC. Cation-treated membranes are also significantly different from those “stacked” at pH 4.5. While the latter do show decreased extractability, there is no change in the chlorophyll $\text{a}\text{b}$ ratio of the extract, and the membranes cannot be “unstacked” with trypsin. We conclude that octyl glucoside extractability reflects the lateral interaction of CP complexes with each other and with other components in the same plane of the membrane. It is clear that divalent cations have several effects on thylakoid membranes, not all of which are due to their ability to promote stacking.     

Novel living cell sheet harvest system composed of thermoreversible methylcellulose hydrogels

In this study, a novel yet simple method, using a thermoreversible hydrogel system coated on tissue culture polystyrene (TCPS) dishes, was developed for harvesting living cell sheets. The hydrogel system was prepared by simply pouring aqueous methylcellulose (MC) solutions blended with distinct salts on TCPS dishes at 20 degrees C. For the applications to cell culture, only those aqueous MC compositions that may form a gel at 37 degrees C were chosen for the study. It was found that the hydrogel coating composed of 8% MC blended with 10 g/L PBS (phosphate buffered saline) (the MC/PBS hydrogel, with a gelation temperature of approximately 25 degrees C) stayed intact throughout the entire course of cell culture. To improve cell attachments, the MC/PBS hydrogel at 37 degrees C was evenly spread with a neutral aqueous collagen at 4 degrees C. The spread aqueous collagen gradually reconstituted with time and thus formed a thin layer of collagen (the MC/PBS/collagen hydrogel). After cells reached confluence, a continuous monolayer cell sheet formed on the surface of the MC/PBS/collagen hydrogel. When the grown cell sheet was placed outside of the incubator at 20 degrees C, it detached gradually from the surface of the thermoreversible hydrogel spontaneously, without treating with any enzymes. The results obtained in the MTT assay demonstrated that the cells cultured on the surface of the MC/PBS/collagen hydrogel had an even better activity than those cultured on an uncoated TCPS dish. After harvesting the detached cell sheet, the remaining viscous hydrogel system is reusable. Additionally, the developed hydrogel system can be used for culturing a multilayer cell sheet. The obtained living cell sheets may be used for tissue reconstructions.     

Type VI secretion and bacteriophage tail tubes share a common assembly pathway

The Type VI secretion system (T6SS) is a widespread macromolecular structure that delivers protein effectors to both eukaryotic and prokaryotic recipient cells. The current model describes the T6SS as an inverted phage tail composed of a sheath‐like structure wrapped around a tube assembled by stacked Hcp hexamers. Although recent progress has been made to understand T6SS sheath assembly and dynamics, there is no evidence that Hcp forms tubes in vivo. Here we show that Hcp interacts with TssB, a component of the T6SS sheath. Using a cysteine substitution approach, we demonstrate that Hcp hexamers assemble tubes in an ordered manner with a head‐to‐tail stacking that are used as a scaffold for polymerization of the TssB/C sheath‐like structure. Finally, we show that VgrG but not TssB/C controls the proper assembly of the Hcp tubular structure. These results highlight the conservation in the assembly mechanisms between the T6SS and the bacteriophage tail tube/sheath.     

From structure to application: Progress and opportunities in peptide materials development

For over 20 years, peptide materials in their hydrogel or soluble fibril form have been used for biomedical applications such as drug delivery, cell culture, vaccines, and tissue regeneration. To facilitate the translation of these materials, key areas of research still need to be addressed. Their structural characterization lags compared to amyloid proteins. Many of the structural features designed to guide materials formation are primarily being characterized by their observation in atomic resolution structures of amyloid assemblies. Herein, these motifs are examined in relation to peptide designs identifying common interactions that drive assembly and provide structural specificity. Current efforts to design complex structures, as reviewed here, highlight the need to extend the structural revolution of amyloid proteins to peptide assemblies to validate design principles. With respect to clinical applications, the fundamental interactions and responses of proteins, cells, and the immune system to peptide materials are still not well understood. Only a few trends are just now emerging for peptide materials interactions with biological systems. Understanding how peptide material properties influence these interactions will enable the translation of materials towards current and emerging applications.     

The Rise of the Cartwheel: Seeding the Centriole Organelle

The cartwheel is a striking structure critical for building the centriole, a microtubule‐based organelle fundamental for organizing centrosomes, cilia, and flagella. Over the last 50 years, the cartwheel has been described in many systems using electron microscopy, but the molecular nature of its constituent building blocks and their assembly mechanisms have long remained mysterious. Here, we review discoveries that led to the current understanding of cartwheel structure, assembly, and function. We focus on the key role of SAS‐6 protein self‐organization, both for building the signature ring‐like structure with hub and spokes, as well as for their vertical stacking. The resemblance of assembly intermediates in vitro and in vivo leads us to propose a novel registration step in cartwheel biogenesis, whereby stacked SAS‐6‐containing rings are put in register through interactions with peripheral elements anchored to microtubules. We conclude by evoking some avenues for further uncovering cartwheel and centriole assembly mechanisms.     

Rapid one‐step purification of single‐cells encapsulated in alginate microcapsules from oil to aqueous phase using a hydrophobic filter paper: Implications for single‐cell experiments

By virtue of the biocompatibility and physical properties of hydrogel, picoliter‐sized hydrogel microcapsules have been considered to be a biometric signature containing several features similar to that of encapsulated single cells, including phenotype, viability, and intracellular content. To maximize the experimental potential of encapsulating cells in hydrogel microcapsules, a method that enables efficient hydrogel microcapsule purification from oil is necessary. Current methods based on centrifugation for the conventional stepwise rinsing of oil, are slow and laborious and decrease the monodispersity and yield of the recovered hydrogel microcapsules. To remedy these shortcomings we have developed a simple one‐step method to purify alginate microcapsules, containing a single live cell, from oil to aqueous phase. This method employs oil impregnation using a commercially available hydrophobic filter paper without multistep centrifugal purification and complicated microchannel networks. The oil‐suspended alginate microcapsules encapsulating single cells from mammalian cancer cell lines (MCF–7, HepG2, and U937) and microorganisms (Chlorella vulgaris) were successfully exchanged to cell culture media by quick (～10 min) depletion of the surrounding oil phase without coalescence of neighboring microcapsules. Cell proliferation and high integrity of the microcapsules were also demonstrated by long‐term incubation of microcapsules containing a single live cell. We expect that this method for the simple and rapid purification of encapsulated single‐cell microcapsules will attain widespread adoption, assisting cell biologists and clinicians in the development of single‐cell experiments.     

Combination of microwell structures and direct oxygenation enables efficient and size‐regulated aggregate formation of an insulin‐secreting pancreatic β‐cell line

Spherical three‐dimensional (3D) cellular aggregates are valuable for various applications such as regenerative medicine or cell‐based assays due to their stable and high functionality. However, previous methods to form aggregates have shown drawbacks, being labor‐intensive, showing low productivity per unit area or volume and difficulty to form homogeneous aggregates. We proposed a novel strategy based on oxygen‐permeable polydimethylsiloxane (PDMS) honeycomb microwell sheets, which can theoretically supply about 80 times as much oxygen as conventional polystyrene culture dishes, to produce recoverable aggregates in controllable sizes using mouse insulinoma cells (MIN6‐m9). In 48 hours of culture, the PDMS sheets produced aggregates whose diameters were strictly controlled (?32, 60, 90, 150 and 280 mm) even at an inoculum density eight times higher (8.0×105 cells/cm²) than that of normal confluent monolayers (1.0×105 cells/cm²). Measurement of the oxygen tension near the cell layer and glucose/lactate analysis clearly showed that cells exhibit aerobic respiration on the PDMS‐based culture system. Glucose‐responsive insulin secretion of the recovered aggregates showed that the aggregates around 90 mm in diameter secreted the largest amounts of insulin. This confirmed the advantages of 3D cellular organization and the existence of a suitable aggregate size, above which excess organization leads to a decreased metabolic response. These results demonstrated that this microwell‐based PDMS culture system provides a promising method to form size‐regulated and better functioning 3D cellular aggregates of various kinds of cells with a high yield per surface area. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 30:178–187, 2014     

Matrix Rigidity-Modulated Cardiovascular Organoid Formation from Embryoid Bodies

Stem cell clusters, such as embryoid bodies (EBs) derived from embryonic stem cells, are extensively studied for creation of multicellular clusters and complex functional tissues. It is common to control phenotypes of ES cells with varying molecular compounds; however, there is still a need to improve the controllability of cell differentiation, and thus, the quality of created tissue. This study demonstrates a simple but effective strategy to promote formation of vascularized cardiac muscle - like tissue in EBs and form contracting cardiovascular organoids by modulating the stiffness of a cell adherent hydrogel. Using collagen-conjugated polyacrylamide hydrogels with controlled elastic moduli, we discovered that cellular organization in a form of vascularized cardiac muscle sheet was maximal on the gel with the stiffness similar to cardiac muscle. We envisage that the results of this study will greatly contribute to better understanding of emergent behavior of stem cells in developmental and regeneration process and will also expedite translation of EB studies to drug-screening device assembly and clinical treatments.