Phage P22 procapsids equilibrate with free coat protein subunits

Assembly of bacteriophage P22 procapsids has long served as a model for assembly of spherical viruses. Historically, assembly of viruses has been viewed as a non-equilibrium process. Recently alternative models have been developed that treat spherical virus assembly as an equilibrium process. Here we have investigated whether P22 procapsid assembly reactions achieve equilibrium or are irreversibly trapped. To assemble a procapsid-like particle in vitro, pure coat protein monomers are mixed with scaffolding protein. We show that free subunits can exchange with assembled structures, indicating that assembly is a reversible, equilibrium process. When empty procapsid shells (procapsids with the scaffolding protein stripped out) were diluted so that the concentration was below the dissociation constant ( approximately 5 microM) for coat protein monomers, free monomers were detected. The released monomers were assembly-competent; when NaCl was added to metastable partial capsids that were aged for an extended period, the released coat subunits were able to rapidly re-distribute from the partial capsids and form whole procapsids. Lastly, radioactive monomeric coat subunits were able to exchange with the subunits from empty procapsid shells. The data presented illustrate that coat protein monomers are able to dissociate from procapsids in an active state, that assembly of procapsids is consistent with reactions at equilibrium and that the reaction follows the law of mass action.     

The Impact of Viral RNA on Assembly Pathway Selection

Many single-stranded RNA viruses self-assemble their protein containers around their genomes. The roles that the RNA plays in this assembly process have mostly been ignored, resulting in a protein-centric view of assembly that is unable to explain adequately the fidelity and speed of assembly in such viruses. Using bacteriophage MS2, we demonstrate here via a combination of mass spectrometry and kinetic modelling how viral RNA can bias assembly towards only a small number of the many possible assembly pathways, thus increasing assembly efficiency. Assembly reactions have been studied in vitro using phage coat protein dimers, the known building block of the T = 3 shell, and short RNA stem-loops based on the translational operator of the replicase cistron, a 19 nt fragment (TR). Mass spectrometry has unambiguously identified two on-pathway intermediates in such reactions that have stoichiometry consistent with formation of either a particle 3-fold or 5-fold axis. These imply that there are at least two sub-pathways to the final capsid. The flux through each pathway is controlled by the length of the RNA stem-loop triggering the assembly reaction and this effect can be understood in structural terms. The kinetics of intermediate formation have been studied and show steady-state concentrations for intermediates between starting materials and the T = 3 shell, consistent with an assembly process in which all the steps are in equilibrium. These data have been used to derive a kinetic model of the assembly reaction that in turn allows us to determine the dominant assembly pathways explicitly, and to estimate the effect of the RNA on the free energy of association between the assembling protein subunits. The results reveal that there are only a small number of dominant assembly pathways, which vary depending on the relative ratios of RNA and protein. These results suggest that the genomic RNA plays significant roles in defining the precise assembly sub-pathway followed to create the final capsid.     

Assembly of the 30S ribosomal subunit

The assembly of ribosomes requires a significant fraction of the energy expenditure for rapidly growing bacteria. The ribosome is composed of three large RNA molecules and over 50 small proteins that must be rapidly and efficiently assembled into the molecular machine responsible for protein synthesis. For over 30 years, the 30S ribosome has been a key model system for understanding the process of ribosome biogenesis through in vitro assembly experiments. We have recently developed an isotope pulse-chase experiment using quantitative mass spectrometry that permits assembly kinetics to be measured in real time. Kinetic studies have revealed an assembly energy landscape that ensures efficient assembly by a flexible and robust pathway.     

鸟枪法蛋白质鉴定质量控制方法研究进展

鸟枪法串联质谱蛋白质鉴定策略由于其高可靠和高效率而被广泛应用于蛋白质组学研究中,这种方法直接对蛋白质混合物进行酶切,以肽段为鉴定单元,继而推导真实的样品蛋白质．由于利用质谱图推导肽段存在一定的假阳性率,而且直接对蛋白质混合物的酶切也导致了肽段和蛋白质之间关联信息的丢失,所鉴定的蛋白质难免存在部分不可靠结果．因此,蛋白质鉴定的质量控制在蛋白质组学研究中极为重要．蛋白质鉴定的质量控制包含两大类主要方法,其一为利用肽段进行蛋白质组装,当前最常用也被证明最有效的方法是使用简约原则,即用最少的蛋白质解释所有鉴定肽段,现有的方法可以分为布尔型和概率型,其二为鉴定蛋白质的可靠性评估,包括单个蛋白质鉴定置信度和蛋白质鉴定整体水平的假阳性率计算．综合各种可辅助蛋白质鉴定的先验信息,构建普适的概率统计模型,是目前蛋白质鉴定质量控制方法的发展趋势．     

A study of the states of aggregation of alfalfa mosaic virus protein.

The states of aggregation of alfalfa mosaic virus (AMV) protein have been characterized by sedimentation velocity experiments and electron microscopy. The main association product is a spherical particle with an s value of about 30S. It is highly likely that the assembly of this particle starts with dimers of the 25000 molecular mass unit resulting in an icosahedral particle made of 30 dimers. No intermediate aggregation products have been detected. The clustering pattern of the protein in the cylindrical part of the AMV capsid favours the concept of dimers as the active assembling units.     

On the effect of thermodynamic equilibrium on the assembly efficiency of complex multi-layered virus-like particles (VLP): the case of rotavirus VLP

Previous studies have reported the production of malformed virus-like-particles (VLP) in recombinant host systems. Here we computationally investigate the case of a large triple-layered rotavirus VLP (RLP). In vitro assembly, disassembly and reassembly data provides strong evidence of microscopic reversibility of RLP assembly. Light scattering experimental data also evidences a slow and reversible assembly untypical of kinetic traps, thus further strengthening the fidelity of a thermodynamically controlled assembly. In silico analysis further reveals that under favourable conditions particles distribution is dominated by structural subunits and completely built icosahedra, while other intermediates are present only at residual concentrations. Except for harshly unfavourable conditions, assembly yield is maximised when proteins are provided in the same VLP protein mass composition. The assembly yield decreases abruptly due to thermodynamic equilibrium when the VLP protein mass composition is not obeyed. The latter effect is more pronounced the higher the Gibbs free energy of subunit association is and the more complex the particle is. Overall this study shows that the correct formation of complex multi-layered VLPs is restricted to a narrow range of association energies and protein concentrations, thus the choice of the host system is critical for successful assembly. Likewise, the dynamic control of intracellular protein expression rates becomes very important to minimize wasted proteins.     

Analysis of protein complexes using mass spectrometry

The versatile combination of affinity purification and mass spectrometry (AP-MS) has recently been applied to the detailed characterization of many protein complexes and large protein-interaction networks. The combination of AP-MS with other techniques, such as biochemical fractionation, intact mass measurement and chemical crosslinking, can help to decipher the supramolecular organization of protein complexes. AP-MS can also be combined with quantitative proteomics approaches to better understand the dynamics of protein-complex assembly.     

Folding and assembly of large macromolecular complexes monitored by hydrogen-deuterium exchange and mass spectrometry

Recent advances in protein mass spectrometry (MS) have enabled determinations of hydrogen deuterium exchange (HDX) in large macromolecular complexes. HDX-MS became a valuable tool to follow protein folding, assembly and aggregation. The methodology has a wide range of applications in biotechnology ranging from quality control for over-expressed proteins and their complexes to screening of potential ligands and inhibitors. This review provides an introduction to protein folding and assembly followed by the principles of HDX and MS detection, and concludes with selected examples of applications that might be of interest to the biotechnology community.     

Cysteine 155 plays an important role in the assembly of Mycobacterium tuberculosis FtsZ

The assembly of FtsZ plays an important role in bacterial cell division. Mycobacterium tuberculosis FtsZ (MtbFtsZ) has a single cysteine residue at position 155. We have investigated the role of the lone cysteine residue in the assembly of MtbFtsZ using different complimentary approaches, namely chemical modification by a thiol-specific reagent 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB) or a cysteine-chelating agent HgCl(2), and site-directed mutagenesis of the cysteine residue. HgCl(2) strongly reduced the polymerized mass of MtbFtsZ while it had no detectable effect on the polymerization of Escherichia coli FtsZ, which lacks a cysteine residue. HgCl(2) inhibited the protofilamentous assembly of MtbFtsZ and induced the aggregation of the protein. Further, HgCl(2) perturbed the secondary structure of MtbFtsZ and increased the binding of a hydrophobic probe 1-anilinonaphthalene-8-sulfonic acid (ANS) with MtbFtsZ, indicating that the binding of HgCl(2) altered the conformation of MtbFtsZ. Chemical modification of MtbFtsZ by DTNB also decreased the polymerized mass of MtbFtsZ. Further, the mutagenesis of Cys-155 to alanine caused a strong reduction in the assembly of MtbFtsZ. Under assembly conditions, the mutated protein formed aggregates instead of protofilaments. Far-UV CD spectroscopy and ANS binding suggested that the mutated MtbFtsZ has different conformation than that of the native MtbFtsZ. The effect of the mutation or chemical modification of Cys-155 on the MtbFtsZ assembly has been explained considering its location in the MtbFtsZ crystal structure. The results together suggest that the cysteine residue (Cys-155) of MtbFtsZ plays an important role in the assembly of MtbFtsZ into protofilaments.     

Fibrous projections from the core of a bacteriophage T7 procapsid

A cylindrical core previously demonstrated in a bacteriophage T7 procapsid (capsid I) has been further examined by electron microscopy. Fibrous extensions of the core have been observed; these fibers appear to connect the core to the capsid I envelope. After infection of a nonpermissive host with bacteriophage T7 amber mutant in any gene coding for a core protein, the resulting lysates contained more noncapsid assemblies of capsid envelope protien than did wild-type lysates; these assemblies had a mass two to at least 500 times greater than the mass of capsid I. This suggests that the internal core and fibers assist the assembly of subunits in the envelope of capsid I.     

Protein–solvent interaction

Protein folding and assembly can be manipulated in in vitro systems by co-solvents at high concentrations. A number of co-solvents that enhance protein stability and assembly have been shown to be excluded from the protein surface. Such co-solvent exclusion has been demonstrated by dialysis experiments and shown to be correlated with their effects on protein stability and assembly.     

A Dynamic Model of the Proteins that Form the Initial Iron-Sulfur Cluster Biogenesis Machinery in Yeast Mitochondria

The assembly of iron-sulfur clusters (ISCs) in eukaryotes involves the protein Frataxin. Deficits in this protein have been associated with iron inside the mitochondria and impair ISC biogenesis as it is postulated to act as the iron donor for ISCs assembly in this organelle. A pronounced lack of Frataxin causes Friedreich’s Ataxia, which is a human neurodegenerative and hereditary disease mainly affecting the equilibrium, coordination, muscles and heart. Moreover, it is the most common autosomal recessive ataxia. High similarities between the human and yeast molecular mechanisms that involve Frataxin have been suggested making yeast a good model to study that process. In yeast, the protein complex that forms the central assembly platform for the initial step of ISC biogenesis is composed by yeast frataxin homolog, Nfs1–Isd11 and Isu. In general, it is commonly accepted that protein function involves interaction with other protein partners, but in this case not enough is known about the structure of the protein complex and, therefore, how it exactly functions. The objective of this work is to model the protein complex in order to gain insight into structural details that end up with its biological function. To achieve this goal several bioinformatics tools, modeling techniques and protein docking programs have been used. As a result, the structure of the protein complex and the dynamic behavior of its components, along with that of the iron and sulfur atoms required for the ISC assembly, have been modeled. This hypothesis will help to better understand the function and molecular properties of Frataxin as well as those of its ISC assembly protein partners.     

Interconnected assembly factors regulate the biogenesis of mitoribosomal large subunit

Mitoribosomes consist of ribosomal RNA and protein components, coordinated assembly of which is critical for function. We used mitoribosomes from Trypanosoma brucei with reduced RNA and increased protein mass to provide insights into the biogenesis of the mitoribosomal large subunit. Structural characterization of a stable assembly intermediate revealed 22 assembly factors, some of which have orthologues/counterparts/homologues in mammalian genomes. These assembly factors form a protein network that spans a distance of 180 Å, shielding the ribosomal RNA surface. The central protuberance and L7/L12 stalk are not assembled entirely and require removal of assembly factors and remodeling of the mitoribosomal proteins to become functional. The conserved proteins GTPBP7 and mt‐EngA are bound together at the subunit interface in proximity to the peptidyl transferase center. A mitochondrial acyl‐carrier protein plays a role in docking the L1 stalk, which needs to be repositioned during maturation. Additional enzymatically deactivated factors scaffold the assembly while the exit tunnel is blocked. Together, this extensive network of accessory factors stabilizes the immature sites and connects the functionally important regions of the mitoribosomal large subunit.     

Quantitative Proteomic Analysis of Ribosome Assembly and Turnover In Vivo

Although high-resolution structures of the ribosome have been solved in a series of functional states, relatively little is known about how the ribosome assembles, particularly in vivo. Here, a general method is presented for studying the dynamics of ribosome assembly and ribosomal assembly intermediates. Since significant quantities of assembly intermediates are not present under normal growth conditions, the antibiotic neomycin is used to perturb wild-type Escherichia coli. Treatment of E. coli with the antibiotic neomycin results in the accumulation of a continuum of assembly intermediates for both the 30S and 50S subunits. The protein composition and the protein stoichiometry of these intermediates were determined by quantitative mass spectrometry using purified unlabeled and ¹⁵N-labeled wild-type ribosomes as external standards. The intermediates throughout the continuum are heterogeneous and are largely depleted of late-binding proteins. Pulse-labeling with ¹⁵N-labeled medium time-stamps the ribosomal proteins based on their time of synthesis. The assembly intermediates contain both newly synthesized proteins and proteins that originated in previously synthesized intact subunits. This observation requires either a significant amount of ribosome degradation or the exchange or reuse of ribosomal proteins. These specific methods can be applied to any system where ribosomal assembly intermediates accumulate, including strains with deletions or mutations of assembly factors. This general approach can be applied to study the dynamics of assembly and turnover of other macromolecular complexes that can be isolated from cells.     

Characterization of Rous sarcoma virus Gag particles assembled in vitro

Purified retrovirus Gag proteins or Gag protein fragments are able to assemble into virus-like particles (VLPs) in vitro in the presence of RNA. We have examined the role of nucleic acid and of the NC domain in assembly of VLPs from a Rous sarcoma virus (RSV) Gag protein and have characterized these VLPs using transmission electron microscopy (TEM), scanning TEM (STEM), and cryoelectron microscopy (cryo-EM). RNAs of diverse sizes, single-stranded DNA oligonucleotides as small as 22 nucleotides, double-stranded DNA, and heparin all promoted efficient assembly. The percentages of nucleic acid by mass, in the VLPs varied from 5 to 8%. The mean mass of VLPs, as determined by STEM, was 6.5 x 10(7) Da for both RNA-containing and DNA oligonucleotide-containing particles, corresponding to a stoichiometry of about 1,200 protein molecules per VLP, slightly lower than the 1,500 Gag molecules estimated previously for infectious RSV. By cryo-EM, the VLPs showed the characteristic morphology of immature retroviruses, with discernible regions of high density corresponding to the two domains of the CA protein. In spherically averaged density distributions, the mean radial distance to the density corresponding to the C-terminal domain of CA was 33 nm, considerably smaller than that of equivalent human immunodeficiency virus type 1 particles. Deletions of the distal portion of NC, including the second Zn-binding motif, had little effect on assembly, but deletions including the charged residues between the two Zn-binding motifs abrogated assembly. Mutation of the cysteine and histidine residues in the first Zn-binding motif to alanine did not affect assembly, but mutation of the basic residues between the two Zn-binding motifs, or of the basic residues in the N-terminal portion of NC, abrogated assembly. Together, these findings establish VLPs as a good model for immature virions and establish a foundation for dissection of the interactions that lead to assembly.     

First images of a glutamate receptor ion channel: oligomeric state and molecular dimensions of GluRB homomers.

We have expressed, purified, and characterized glutamate receptor ion channels (GluR) assembled as homomers of the subunit GluRB. For the first time, single-milligram quantities of biochemically homogeneous GluR have been obtained. The protein exhibits the expected pharmacological profile and a high specific activity for ligand binding. Density-gradient centrifugation reveals a uniform oligomeric assembly and a molecular mass suggesting that the channel is a tetramer. On the basis of electron microscopic images, the receptor appears to form an elongated structure that is visualized in several orientations. The molecular dimensions of the molecule are approximately 11 x 14 x 17 nm, and solvent-accessible features can be seen; these may contribute to formation of the ion-conducting pathway of the channel. The channel dimensions are consistent with an overall 2-fold symmetric assembly, suggesting that the tetrameric receptor may be a dimer of dimers.     

Assembly of the 30S ribosomal subunit: positioning ribosomal protein S13 in the S7 assembly branch

Studies of Escherichia coli 30S ribosomal subunit assembly have revealed a hierarchical and cooperative association of ribosomal proteins with 16S ribosomal RNA; these results have been used to compile an in vitro 30S subunit assembly map. In single protein addition and omission studies, ribosomal protein S13 was shown to be dependent on the prior association of ribosomal protein S20 for binding to the ribonucleoprotein particle. While the overwhelming majority of interactions revealed in the assembly map are consistent with additional data, the dependency of S13 on S20 is not. Structural studies position S13 in the head of the 30S subunit > 100 A away from S20, which resides near the bottom of the body of the 30S subunit. All of the proteins that reside in the head of the 30S subunit, except S13, have been shown to be part of the S7 assembly branch, that is, they all depend on S7 for association with the assembling 30S subunit. Given these observations, the assembly requirements for S13 were investigated using base-specific chemical footprinting and primer extension analysis. These studies reveal that S13 can bind to 16S rRNA in the presence of S7, but not S20. Additionally, interaction between S13 and other members of the S7 assembly branch have been observed. These results link S13 to the 3' major domain family of proteins, and the S7 assembly branch, placing S13 in a new location in the 30S subunit assembly map where its position is in accordance with much biochemical and structural data.     

Regulation of PCNA and CAF-1 expression by the two tuberous sclerosis gene products

Tuberous sclerosis is an autosomal dominant tumor suppressor gene syndrome affecting about 1 in 6000 individuals. Two genes have been shown to be responsible for this disease: TSC1, encoding hamartin and TSC, encoding tuberin. A variety of tumors characteristically occur in different organs of tuberous sclerosis patients and are believed to result from defects in cell cycle/cell size control. In this study, we performed two-dimensional gel electrophoresis with subsequent mass spectrometrical identification of protein spots after overexpression of TSC1 or TSC2. We found expression of PCNA and the p48 subunit of CAF-1 to be regulated by two tuberous sclerosis gene products. CAF-1 and PCNA interact as major regulators of chromatin assembly during DNA repair. We suggest that deregulation of the control of chromatin assembly might contribute to development of tumors in tuberous sclerosis patients and provide important new insights into the molecular development, especially since deregulation of chromatin assembly and DNA repair results in genomic instability, a hallmark of tumor development.     

Effect of homo poly(L-amino acids) on fibrin assembly: role of charge and molecular weight

Positively charged molecules such as protamine, leukocyte cationic protein, and the carboxyl terminus of platelet factor 4 have been shown to increase fibrin fiber thickness. Synthetic homo poly(L-amino acids) were used to explore the role of charge and molecular weight of cationic molecules on fibrin assembly. The effects of poly(L-lysine) (PLL), poly(L-glutamic acid) (PLG), poly(L-aspartic acid) (PLA), poly(L-histidine) (PLH), and poly(L-arginine) (PLArg) on the assembly and structure of fibrin gels were studied by using light-scattering techniques. At a PLG (Mr 60,000) concentration of 80 micrograms/mL and a PLA (Mr 20,000) concentration of 64 microgram/mL, neither of these negatively charged polymers produced a detectable change in either fibrin assembly kinetics or final structure. Positively charged PLArg (16 micrograms/mL) caused a 30% increase in fibrin fiber mass/length ratio without calcium. In contrast, PLH (16 micrograms/mL), also positively charged, had no effect in the absence of CaCl2 but produced a 40% increase in fiber mass/length ratio with 5 mM CaCl2. At concentrations as low as 1 microgram/mL, positively charged PLL increased the initial fibrin assembly kinetics and led to larger fiber mass/length ratio. The impact on fibrin mass/length ratio was equivalent for three different molecular weight preparations of PLL (Mr 25,000, 90,000, and 240,000). The lack of a molecular weight effect on fiber thickness and the low polymer concentrations required to produce the perturbation argue against an excluded volume effect as the mechanism by which lateral fiber growth is augmented. Mechanisms by which poly(L-amino acids) may perturb fibrin assembly are discussed.     

Multiple equilibria of the Escherichia coli chaperonin GroES revealed by mass spectrometry

Nanospray time-of-flight mass spectrometry has been used to study the assembly of the heptamer of the Escherichia coli cochaperonin protein GroES, a system previously described as a monomer-heptamer equilibrium. In addition to the monomers and heptamers, we have found measurable amounts of dimers and hexamers, the presence of which suggests the following mechanism for heptamer assembly: 2 Monomers <--> Dimer; 3 Dimers <--> Hexamer; Hexamer + Monomer <--> Heptamer. Equilibrium constants for each of these steps, and an overall constant for the Monomer <--> Heptamer equilibrium, have been estimated from the data. These constants imply a standard free-energy change, DeltaG(0), of about 9 kcal/mol for each contact surface formed between GroES subunits, except for the addition of the last subunit, where DeltaG(0) = 6 kcal/mol. This lower value probably reflects the loss of entropy when the heptamer ring is formed. These experiments illustrate the advantages of electrospray mass spectrometry as a method of measuring all components of a multiple equilibrium system.