The deformation behaviour of silver nanowires with kinked twin boundaries under tensile loading

ABSTRACT

Atomistic simulations are used to investigate the mechanical properties of silver nanowires (NWs) with kinked twin boundaries (TBs) under tensile loading. For comparison, a different ledge width of twinned NWs with both square and circular kink-steps are considered in this study. The embedded-atom-method potential is employed to describe the atomic interactions. To identify the defect evolution and incipient plastic deformation mechanism, the centrosymmetry parameter is implemented in our self-developed programme. Twinned NWs with both square and circular ledges are shown to have a reduced impact on yield stress as compared to their perfect TBs counterpart models in elastic deformation. In twinned NWs with rectangular ledges, a strain-hardening effect was observed in defective NWs. The incipient plastic deformation is influenced by the ledge width. While in twinned NWs with circular ledges, the ledges rather than the surface effect are the only dislocation source in their incipient plastic deformation. Our findings offer a view of imperfection in twinned NWs, and it is believed that the attention being paid to defective TBs will be helpful to further understanding of the mechanical properties of TB-strengthened NWs.     

A study on the effects of twin boundaries and surface morphology on deformation behaviours of silver nanowires

Nanoscale twin boundaries (TBs) and surface morphology play a significant role in the yield behaviour of nanowires (NWs). However, few studies have directly compared their effects on the mechanical response of metal NWs. In this article, the mechanical properties of three 〈1 1 1〉 silver NWs with a diameter of 12.2 nm are studied using molecular dynamics simulations. The 〈1 1 1〉 silver NWs are single crystalline rectangular NWs (SCNW), twinned rectangular NWs (TRNW) and faceted twinned NWs (FTNW), respectively. Comparing SCNW and the twinned NWs, we found that a superior combination of higher strength and elasticity was achieved in the twinned NWs by introducing the TBs in elastic region. Then, we also found that the yield strain of FTNW have a strong dependence on TB spacing. Furthermore, a comparison of the incipient plastic deformation between TRNW and FTNW has been made by monitoring defects evolution. To identify the defects evolution, a centrosymmetry parameter was defined and implemented in the self-developed program. And we also compared the effect of TB and surface morphology on mechanical response of three silver NWs. In general, it can be concluded that TBs significantly influence the mechanical properties of metallic NWs and it is more essential than surface morphology.     

Strategies of burrowing in soft muddy sediments by diverse polychaetes

Muddy sediments are elastic solids through which morphologically diverse animals extend burrows by fracture. Muddy sediments inhabited by burrowing infauna vary considerably in mechanical properties, however, and at high enough porosities, muds can be fluidized. In this study, we examined burrowing behaviors and mechanisms of burrow extension for three morphologically diverse polychaete species inhabiting soft muddy sediments. Worms burrowed in gelatin, a transparent analog for muddy sediments, and in natural sediments in a novel viewing box enabling visualization of behaviors and sediment responses. Individuals of Scalibregma inflatum and Sternaspis scutata can extend burrows by fracture, but both also extended burrows by plastic deformation and by combinations of fracture and plastic deformation. Mechanical responses of sediments corresponded to different burrowing behaviors in Scalibregma; direct peristalsis was used to extend burrows by fracture or a combination of plastic deformation and fracture, whereas a retrograde expansive peristaltic wave extended burrows by plastic deformation. Burrowing speeds differed between behaviors and sediment mechanical responses, with slower burrowing associated with plastic deformation. Sternaspis exhibited less variability in behavior and burrowing speed but did extend burrows by different mechanisms consistent with observations of Scalibregma. Individuals of Ophelina acuminata did not extend burrows by fracture; rather individuals plastically deformed sediments similarly to individuals of the related Armandia brevis. Our results extend the range of natural sediments in which burrowing by fracture has been observed, but the dependence of burrow extension mechanism on species, burrowing behavior, and burrowing speed highlights the need for better understanding of mechanical responses of sediments to burrowers.     

Slow development of leaf photosynthesis in an evergreen broad-leaved tree, Castanopsis sieboldii: relationships between leaf anatomical characteristics and photosynthetic rate

Changes in net photosynthetic rate on a leaf area basis and anatomical properties during leaf development were studied in an evergreen broad‐leaved tree, Castanopsis sieboldii and an annual herb, Phaseolus vulgaris. In C. sieboldii, surface area of mesophyll cells facing the intercellular air spaces on a leaf area basis (S_mes) was already considerable at the time of full leaf area expansion (FLE). However, surface area of chloroplasts facing the intercellular air spaces on a leaf area basis (S_c), and chlorophyll and Rubisco contents on a leaf area basis increased to attain their maximal values 15–40 d after FLE. In contrast, in P. vulgaris, chloroplast number on a leaf area basis, S_c and S_mes at 10 d before FLE were two to three times greater than the steady‐state levels attained at around FLE. In C. sieboldii, the internal CO₂ transfer conductance (g_i) slightly increased for 10 d after FLE but then decreased toward the later stages. Limitation of photosynthesis by g_i was only about 10% at FLE, but then increased to about 30% at around 40 d after FLE. The large limitation after FLE by g_i was probably due to the decrease in CO₂ concentration in the chloroplast caused by the increases in thickness of mesophyll cell walls and in Rubisco content per chloroplast surface area. These results clearly showed that: (1) in C. sieboldii, chloroplast development proceeded more slowly than mesophyll cell expansion and continued well after FLE, whereas in P. vulgaris these processes proceeded synchronously and were completed by FLE; (2) after FLE, photosynthesis in leaves of C. sieboldii was markedly limited by g_i. From these results, it is suggested that, in the evergreen broad‐leaved trees, mechanical protection of mesophyll cells has priority over the efficient CO₂ transfer and quick construction of the chloroplasts.     

Structure-activity relationships of organosulfur compounds as inhibitors of cytochrome P450 1-mediated activation of benzo[a]pyrene in a human cell model

Twelve naturally-occurring organosulfur compounds were investigated as inhibitors of cytochrome P450 1 (CYP450 1)-mediated activation of benzo[a]pyrene (B[a]P) in human hepatoma (HepG2) cells. Inhibition depended on the presence of a diallyl group and the number of S atoms. Diallyl trisulfide (DATS), with a diallyl group and three S atoms, had the highest activity with an IC₅₀ of 0.4 mM, and 1.5-fold higher potency than diallyl disulfide (DADS) containing a diallyl group and two S atoms. Organosulfur compounds containing an alkyl group were less effective, or even ineffective, inhibitors of both CYP450 1 and B[a]P-induced cytotoxicity than DADS and DATS. Alliin and S-allyl cysteine containing the S-cysteinyl group had no inhibition.     

Effects of stand age and tree species on canopy transpiration and average stomatal conductance of boreal forests

We quantified the effect of stand age and tree species composition on canopy transpiration (E_C) by analysing transpiration per unit leaf area (E_L) and canopy stomatal conductance (G_S) for boreal trees comprising a five stand wildfire chronosequence. A total of 196 sap flux sensors were used on 90 trees consisting of Betula papyrifera Marsh (paper birch; present in the youngest stand), Populus tremuloides Michx (quaking aspen), Pinus banksiana Lamb. (jack pine), and Picea mariana (Mill.) (black spruce). While fine roots were positively correlated with stand E_C; leaf area index, basal area, and sapwood area were not. Stands less than 70 years old were dominated by Populus tremuloides and Pinus banksiana and stands greater than 70 years old were composed almost entirely of Picea mariana. As Populus tremuloides and Pinus banksiana increased in size and age, they displayed an increasing sapwood to leaf area ratio (A_S : A_L), a constant minimum leaf water potential (Ψ_L), and a constant proportionality between G_S at low vapour pressure deficit (Dj G_Sref) and the sensitivity of G_S to D (–δ). In contrast, A_S : A_L, minimum Ψ_L, and the proportionally between –δ and G_Sref decreased with height and age in Picea mariana. A G_S model that included the effects of D, A_S : A_L, tree height, and for Picea mariana an increasing soil to leaf water potential gradient with stand age, was able to capture the effects of contrasting hydraulic properties of Picea mariana, Populus tremuloides and Pinus banksiana during stand development after wildfire.     

CoS NWs/Au Hybridized Networks as Efficient Counter Electrodes for Flexible Sensitized Solar Cells

A newly designed counter electrode (CE) composed of a hybridized structure of Au networks and cobalt sulfide (CoS) nanowire (NW) arrays is presented for flexible dye‐sensitized solar cells (DSSCs) and quantum dot‐sensitized solar cells (QDSSCs). The sheet resistance of the Au networks electrode is ≈10 Ω sq^?1 with a transmittance up to 90%. The CoS NWs/Au hybridized networks show excellent electrocatalytic activity and lower charge transfer resistance toward the reduction of both S_x^2? ions and I₃^? ions. The hybridized electrode exhibits remarkable mechanical strength and no obvious changes in morphology and sheet resistance even after 500 bending cycles; 3.13% and 4.73% efficiency are obtained by utilizing CoS/Au hybridized networks as CEs in TiO₂ nanotube array (TNAR) based DSSCs and QDSSCs. This work provides a novel approach to fabricate flexible, transparent, conductive, and catalytically active electrodes for QDSSCs and DSSCs and pomotes the development of transparent percolation conductive films for photovoltaics.     

The layered structure of coronary adventitia under mechanical load

The mechanical loading-deformation relation of elastin and collagen fibril bundles is fundamental to understanding the microstructural properties of tissue. Here, we use multiphoton microscopy to obtain quantitative data of elastin and collagen fiber bundles under in situ loading of coronary adventitia. Simultaneous loading-imaging experiments on unstained fresh coronary adventitia allowed morphometric measurements of collagen and elastin fibril bundles and their individual deformation. Fiber data were analyzed at five different distension loading points (circumferential stretch ratio λ_θ = 1.0, 1.2, 1.4, 1.6, and 1.8) at a physiological axial stretch ratio of λ_axial = 1.3. Four fiber geometrical parameters were used to quantify the fibers: orientation angle, waviness, width, and area fraction. The results show that elastin and collagen fibers in inner adventitia form concentric densely packed fiber sheets, and the fiber orientation angle, width, and area fraction vary transmurally. The extent of fiber deformation depends on the initial orientation angle at no-distension state (λ_θ = 1.0 and λ_axial = 1.3). At higher distension loading, the orientation angle and waviness of fibers decrease linearly, but the width of collagen fiber is relatively constant at λ_θ = 1.0–1.4 and then decrease linearly for λ_θ ≥ 1.4. A decrease of the relative dispersion (SD/mean) of collagen fiber waviness suggests a heterogeneous mechanical response to loads. This study provides fundamental microstructural data for coronary artery biomechanics and we consider it seminal for structural models.     

The oxido‐reductase enzyme glutathione peroxidase 4 (GPX4) governs Salmonella Typhimurium‐induced neutrophil transepithelial migration

Neutrophil (polymorphonuclear leucocytes; PMN) transmigration across mucosal surfaces contributes to dysfunction of epithelial barrier properties, a characteristic underlying many mucosal inflammatory diseases. Using Salmonella enterica serovar Typhimurium (S. Typhimurium) as a prototypic proinflammatory insult, we have previously reported that the eicosanoid hepoxilin A₃ (HXA₃), an endogenous product of 12‐lipoxygenase (12‐LOX) activity, is secreted from the apical surface of the intestinal epithelium to establish a chemotactic gradient that guides PMN across the epithelial surface. Since little is known regarding the molecular mechanisms that regulate 12‐LOX during S. Typhimurium infection, we investigated this pathway. We found that expression of phospholipid glutathione peroxidase (GPX4), which is known to have an inhibitory effect on 12‐LOX activity, is significantly decreased at both the mRNA and protein level during infection with S. Typhimurium. Moreover, employing intestinal epithelial cell monolayers expressing siRNA against GPX4 mRNA, S. Typhimurium‐induced PMN migration was significantly increased compared with the non‐specific siRNA control cells. Conversely, in cells engineered to overexpress GPX4, S. Typhimurium‐induced PMN migration was significantly decreased, which is consistent with the finding that partial depletion of GPX4 by RNAi resulted in a significant increase in HXA₃ secretion during S. Typhimurium infection. Mechanistically, although we found Salmonella entry not to be required for the induced decrease in GPX4, the secreted effector, SipA, which is known to induce epithelial responses leading to stimulation of HXA₃, governed the decrease in GPX4 in a process that does not lead to an overall increase in the levels of ROS. Taken together, these results suggest that S. Typhimurium induces apical secretion of HXA₃ by decreasing the expression of phospholipid GPX, which in turn leads to an increase in 12‐LOX activity, and hence HXA₃ synthesis.     

Probing the structural, electronic and magnetic properties of multicenter Fe2S2 0/−, Fe3S4 0/− and Fe4S4 0/− clusters

The structural, electronic and magnetic properties of neutral and anion Fe₂S₂, Fe₃S₄ and Fe₄S₄ have been investigated with the aid of previous photoelectron spectroscopy and density functional theory calculations. Theoretical electron detachment energies (both vertical and adiabatic) of anion clusters for the lowest energy structure were computed and compared with the experimental results to verify the ground states. The optimized structures show that the ground state structures of Fe₂S₂ ^0/?, Fe₃S₄ ^0/? and Fe₄S₄ ^0/? favor high spin state and are similar to their structures in proteins. The electron delocalization pattern for all the clusters and the nature of bonding between Fe and S atoms were studied by analyzing molecular orbitals. Natural population analysis demonstrates that Fe atoms act as an electron donor in all clusters, and the electron density difference map clearly shows the direction of the electron flow over the whole complex. Furthermore, the investigated magnetism shows that the Fe atoms carried most of the magnetic moments, which is due mainly to the 3d state, while only very small magnetic moments are found on S atoms.     

Survival of tissue balls from the coral Pocillopora damicornis L. exposed to cryoprotectant solutions

In this study, the tolerance of tissue balls (TBs, 100–300 μm in diameter) from the coral Pocillopora damicornis produced using mechanical excision to exposure to cryoprotectant (CPA) solutions was tested. TBs were treated for 20 min at room temperature with solutions of ethylene glycol (EG), methanol (Met), glycerol (Gly) or dimethyl sulfoxide (Me₂SO) at concentrations between 1.0 and 4.5 M. Two parameters were used to evaluate the survival of TBs following CPA treatment. The Undamaged Duration of Tissue Balls (expressed in h) corresponded to the time period during which the membrane surface of TBs remained smooth and their motility was preserved. Tissue Ball Regression (expressed in μm/h) corresponded to the size reduction of TBs over time. TBs tolerated exposure to all CPAs tested at the three lower concentrations employed (1.0 M, 1.5 M and 2.0 M). No survival was achieved following exposure to a 4.5 M CPA solution. At concentrations of 3.0 and 4.0 M, higher Undamaged Duration of Tissue Balls and lower Tissue Ball Regression were obtained following treatment with EG compared to the other three CPAs. Our experiments show that TBs constitute a good experimental material to evaluate CPA toxicity on corals using large numbers of samples. Performing preliminary experiments with TBs may allow reducing the number of tests carried out with less easily available coral forms such as planulae, thereby preserving larval stocks.     

Linking vein properties to leaf biomechanics across 58 woody species from a subtropical forest

• Leaf venations have elements with relatively lower elasticity than other leaf tissue components, which are thought to contribute to leaf biomechanics. A better mechanistic understanding of relationships between vein traits and leaf mechanical properties is essential for ecologically relevant interpretation of leaf structural variations.
• We investigated 13 major (first to third order) and minor (>third order) vein traits, six leaf mechanical properties and other structural traits across 58 woody species from a subtropical forest to elucidate how vein traits contribute to leaf biomechanics.
• Across species, vein dry mass density (ρ_v), total vein dry mass per leaf area (VMA) and minor vein diameter (VD_min), but not the lower‐order vein density (VLA_1?2), were positively correlated with leaf force to punch (F_p) and force to tear (F_t). Structural equation models showed that ρ_v and VD_min not only contribute to leaf mechanical properties directly (direct pathway), but also had impacts on leaf biomechanics by influencing leaf thickness and leaf dry mass per area (indirect pathway).
• Our study demonstrated that vein dry mass density and minor vein diameter are the key vein properties for leaf biomechanics. We also suggest that the mechanical characteristics of venations are potential factors influencing leaf mechanical resistance, structure and leaf economics spectrum.

     

Lectin histochemistry on mucous substances of the taste buds and adjacent epithelia of different vertebrates

Summary In the present study carbohydrate residues in taste buds (TBs) and adjacent epithelial formations of a teleostean fish, a frog and the rabbit were detected by means of lectin histochemistry. Biotinylated lectins fromPisum sativum (PSA),Arachis hypogaea (PNA),Dolichos biflorus (DBA),Triticum vulgaris (WGA and succinylated WGA),Glycine max (SBA) andUlex europaeus (UEA I) have been applied. The lectins were bound to an avidin-biotin-peroxidase-complex (ABC) and visualized by diaminobenzidine/ H₂O₂. Most intensive reactivity was observed at the taste dise cells of the frog with DBA, S-WGA and SBA. PNA did not bind to the TBs of any of the animals tested. As shown in SBA preparations, sialic acid is present in a nonacylated and an acylated form in the mucosa of the frog's tongue. The TBs of the fish possess all the sugars we looked for except for the disaccharided-galactose-(1–3)--d-N-acetyl-galactosamine (Gal/GalNAc) and sialic acid. The TBs of the rabbit contain GalNAc, as detected with DBA, but not with SBA; and fucose (Fuc), mannose (Man) andN-acetyl-glucosamine (GlcNAc). As revealed by preincubation of the tissue sections with neuraminidase in TB cells of the rabbit, sialic acid masks Gal/GalNAc and GalNAc. These lectin-binding characteristics show that in the TBs of some selected representatives which belong to different vertebrate classes exist different mucous substances. These substances possess different binding characteristics to specific sugars, and this is possibly of particular interest to chemoreception phenomena.Dedicated to Professor Dr. T.H. Schiebler on the occasion of his 65th birthday.Parts of this investigation were presented at the 81. Versammlung der Anatomischen Gesellschaft, March 9–14, 1986 at Lübeck (Witt and Reutter 1986), and at the VII th Congress of the Europaen Chemoreception Research Organization, September 22–26, 1986, at Davos (Reutter and Witt 1987).Supported by the Deutsche Forschungsgemeinschaft (Re 225/9-1)     

Effects of crystal orientation and aspect ratio on plastic response of aluminium nanowires under torsion

The plastic response of perfect face-centred cubic single-crystal aluminium (Al) nanowires (NWs) under torsion is studied using molecular dynamics simulations. The Al–Al interaction is described by the many-body tight-binding potential. The effects of the crystal orientation and aspect ratio of the NWs on their deformation are evaluated in terms of atomic trajectories, potential energy, a centrosymmetry parameter and the torque required for deformation. Simulation results clearly show that for NWs, regardless of crystal orientation, dislocations nucleate and propagate on the (1 1 1) close-packed plane. In a NW under torsion, dislocations begin at the surface, extend to the interior along the (1 1 1) close-packed plane and finally diffuse to the middle part. A 〈1 1 0〉-oriented NW has the lowest required torque for deformation due to the occurrence of homogeneous deformation. The mechanism of the plastic response of an Al NW depends on its crystal orientation. For a long NW, geometry instability occurs before material instability (buckling).     

Mutations of basic arginine residue 334 in the D1 protein of Photosystem II lead to unusual S2 state properties in Synechocystis sp. PCC 6803

The C-terminus region of the D1 protein of Photosystem II (PS II) is situated on the lumenal side of the complex and is likely to be involved in the coordination of the active site Mn atoms of the water oxidation complex (WOC). The strictly conserved arginine at position 334 (D1-334) was targeted for site-directed mutagenesis to explore the hypothesis that it is involved in the PS II extrinsic protein binding, chloride binding, or proton transfer. Although it was found that D1-R334 probably not essential for these functions, mutations at this position were found to uniquely alter the kinetics of S-state cycling in general and the properties of the S₂ state in particular. Substitutions of a glutamate (D1-R334E) and a valine (D1-R334V) for D1-R334 lead to an unusually stable (t _1/2 >30 min at room temp) S₂ state, but not S₃, as measured by double flash measurements on the bare platinum electrode. However, measurements of fluorescence decay in the presence of DCMU suggest the S₂ state is only modestly affected by the mutations. Possible reasons for these apparently contradictory results are discussed. This revised version was published online in June 2006 with corrections to the Cover Date.     

Structural evolution and dislocation behaviour study during nanoindentation of Mo20W20Co20Ta20Zr20 high entropy alloy coated Ni single crystal using molecular dynamic simulation

In this present study, deformation behaviour of Mo₂₀W₂₀Co₂₀Ta₂₀Zr₂₀ high entropy alloy (HEA) coated single crystal (SC) nickel (Ni) subjected to nanoindentation test have been investigated to study the mechanical properties and underlying mechanism during nanoindentation test using molecular dynamics (MD) simulation with embedded atom method (EAM) potential. Centro-Symmetry Parameter (CSP) Analysis and Radial Distribution Function (RDF) plots are obtained to get insight of structural evolution during nanoindentation and thereby determine the underlying physics of deformation. During nanoindention test Stacking faults (SFs) formation, dislocation generation, dislocation loops, Lomer–Cottrell (LC) lock and Hirth lock formation due to dislocation-dislocation interaction are observed. At higher indentation depth, formation of dislocation loops is augmented, which indicates nanoindentation deformation is found to be Stacking Fault dominated deformation. The accumulation and relaxation of shear stress near indenter tip at the time of deformation process under nanoindentation test causes the variation of dislocation density, strain hardening, and plastic deformation, which is influenced by the formation of dislocation barriers (LC and Hirth locks) and dislocation loops (shear and prismatic loops).     

Electronic properties and stability phase diagrams for cubic BN surfaces

This contribution investigates structural and electronic properties as well as stability phase diagrams of surfaces of the cubic boron nitride (c-BN). Our calculated parameters for bulk c-BN agree reasonably well with both experimental and computed values available in the literature. Based on the energies of the three experimentally recognised phases of bulk boron, i.e. α-B₃₆, β-B₁₀₅ and γ-B₂₈, we estimate enthalpy of formation of c-BN to be ?2.8 eV. The c-BN(1?0?0) surface offers separate B and N terminations (denoted as c-BN(1?0?0)_B and c-BN(1?0?0)_N), whereas c-BN(1?1?1) and c-BN(1?1?0) are truncated with combinations of boron and nitrogen atoms (denoted as c-BN(1?1?1)_BN and c-BN(1?1?0)_BN). Optimised geometries of surfaces display interlayer displacements up to the three topmost layers. Downward displacement of surface boron atoms signifies a common geometric feature of all surfaces. Bulk c-BN and its most stable surface c-BN(1?0?0)_N possess no metallic character, with band gaps of 5.46 and 2.7 eV, respectively. We find that, only c-BN(1?0?0)_B configuration exhibits a metallic character. c-BN(1?1?0)_BN and c-BN(1?1?1)_BN surfaces display corresponding band gaps of 2.5 and 3.9 eV and, hence, afford no metallic property.     

Barnacle settlement and the adhesion of protein and diatom microfouling to xerogel films with varying surface energy and water wettability

Previous work has shown that organosilica-based xerogels have the potential to control biofouling. In this study, modifications of chemistry were investigated with respect to their resistance to marine slimes and to settlement of barnacle cyprids. Adhesion force measurements of bovine serum albumin (BSA)-coated atomic force microscopy (AFM) tips to xerogel surfaces prepared from aminopropylsilyl-, fluorocarbonsilyl-, and hydrocarbonsilyl-containing precursors, indicated that adhesion was significantly less on the xerogel surfaces in comparison to a poly(dimethylsiloxane) elastomer (PDMSE) standard. The strength of adhesion of BSA on the xerogels was highest on surfaces with the highest and the lowest critical surface tensions, γ_C and surface energies, γ_S, and duplicated the ‘Baier curve’. The attachment to and removal of cells of the diatom Navicula perminuta from a similar series of xerogel surfaces were examined. Initial attachment of cells was comparable on all of the xerogel surfaces, but the percentage removal of attached cells by hydrodynamic shear stress increased with γ_C and increased wettability as measured by the static water contact angle, θ_Ws, of the xerogel surfaces. The percentage removal of cells of Navicula was linearly correlated with both properties (R ² = 0.74 for percentage removal as a function of θ_Ws and R ² = 0.69 for percentage removal as a function of γ_C). Several of the aminopropylsilyl-containing xerogels showed significantly greater removal of Navicula compared to a PDMSE standard. Cypris larvae of the barnacle B. amphitrite showed preferred settlement on hydrophilic/higher energy surfaces. Settlement was linearly correlated with θ_Ws (R ² = 0.84) and γ_C (R ² = 0.84). Hydrophilic xerogels should prove useful as coatings for boats in regions where fouling is dominated by microfouling (protein and diatom slimes).     

Assimilation of Elemental Sulfur by a Mutant of Escherichia coli B

4-Chloro-2-butynyl N-(3-chlorophenyl)carbamate (Barban) is a herbicide whose alkaline hydrolysis leads quantitatively to 3-chloroaniline, after releasing the chlorine atom from the ester group. The dechlorination step proceeds via a nucleophilic substitution reaction of the type S_n2-S_n2 corresponding to an attack by hydroxide ion at the carbon atoms that are a and y to the chlorine atom. The 4-hydroxy-2-butynyl and 2-oxo-3-butenyl N-(3-chlorophenyl)carbamates thus formed are hydrolysed to the N-(3-chlorophenyl)carbamic acid which, on decarboxylation, gives 3-chloroaniline.     

Does acclimation in cavitation resistance due to mechanical perturbation support the pit area or conduit reinforcement hypotheses in Phaseolus vulgaris?

Two Phaseolus vulgaris L. cultivars were exposed to reduced water and stem mechanical perturbation treatments (flexing) to determine if acclimation to these treatments induced hydraulic changes, altered cavitation resistance and changed stem mechanical properties. Additionally, this study sought to determine if changes in cavitation resistance would support the pit area or conduit reinforcement hypotheses. Flexing reduced biomass, leaf area, xylem vessel area and hydraulic conductivity. One cultivar had greater measures of stem strength and cavitation resistance. Flexing increased cavitation resistance (P₅₀) but did not increase Young's modulus, rigidity or flexural strength on dried stems. Stem rigidity and basal diameter were correlated with leaf mass. The ratio of conduit wall thickness to span [(t/b)_h²] increased under high water and flexing treatments while rigidity decreased for one cultivar exposed to both flexing and lower water suggesting an inability to compensate for two simultaneous stresses. Although P₅₀ was not correlated with measures of mechanical strength, P₅₀ was correlated with vessel diameter, consistent with the pit area hypothesis. This study confirmed that mechanical perturbation can impact xylem structural properties and result in altered plant water flow characteristics and cavitation resistance. Long‐term hydraulic acclimation in these herbaceous annuals was constrained by similar tradeoffs that constrain hydraulic properties across species.